Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751233AbaABFb0 (ORCPT ); Thu, 2 Jan 2014 00:31:26 -0500 Received: from mga03.intel.com ([143.182.124.21]:3722 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750729AbaABFbT (ORCPT ); Thu, 2 Jan 2014 00:31:19 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.95,589,1384329600"; d="scan'208";a="452575702" Date: Thu, 2 Jan 2014 13:31:01 +0800 From: fengguang.wu@intel.com To: Kent Overstreet Cc: Jens Axboe , linux-btrfs , linux-fsdevel , LKML , lkp@linux.intel.com Subject: [block:for-3.14/core] kernel BUG at fs/bio.c:1748 Message-ID: <20140102053101.GA29352@localhost> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="5mCyUwZo2JvN/JJP" Content-Disposition: inline User-Agent: Heirloom mailx 12.5 6/20/10 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 209839 Lines: 3594 --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Greetings, We hit the below bug when doing write tests to btrfs. Other filesystems (ext4, xfs) works fine. 2 full dmesgs are attached. 196d38bccfcfa32faed8c561868336fdfa0fe8e4 is the first bad commit commit 196d38bccfcfa32faed8c561868336fdfa0fe8e4 Author: Kent Overstreet AuthorDate: Sat Nov 23 18:34:15 2013 -0800 Commit: Kent Overstreet CommitDate: Sat Nov 23 22:33:56 2013 -0800 block: Generic bio chaining This adds a generic mechanism for chaining bio completions. This is going to be used for a bio_split() replacement, and it turns out to be very useful in a fair amount of driver code - a fair number of drivers were implementing this in their own roundabout ways, often painfully. Note that this means it's no longer to call bio_endio() more than once on the same bio! This can cause problems for drivers that save/restore bi_end_io. Arguably they shouldn't be saving/restoring bi_end_io at all - in all but the simplest cases they'd be better off just cloning the bio, and immutable biovecs is making bio cloning cheaper. But for now, we add a bio_endio_nodec() for these cases. Signed-off-by: Kent Overstreet Cc: Jens Axboe drivers/md/bcache/io.c | 2 +- drivers/md/dm-cache-target.c | 6 ++++ drivers/md/dm-snap.c | 1 + drivers/md/dm-thin.c | 8 +++-- drivers/md/dm-verity.c | 2 +- fs/bio-integrity.c | 2 +- fs/bio.c | 76 ++++++++++++++++++++++++++++++++++++++++---- include/linux/bio.h | 2 ++ include/linux/blk_types.h | 2 ++ 9 files changed, 90 insertions(+), 11 deletions(-) [ 35.466413] random: nonblocking pool is initialized [ 196.918039] ------------[ cut here ]------------ [ 196.919770] kernel BUG at fs/bio.c:1748! [ 196.921505] invalid opcode: 0000 [#1] SMP [ 196.921788] Modules linked in: microcode processor [ 196.921788] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc6-01897-g2b48961 #1 [ 196.921788] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 196.921788] task: ffff8804094acad0 ti: ffff8804094e8000 task.ti: ffff8804094e8000 [ 196.921788] RIP: 0010:[] [] bio_endio+0x1e/0x6a [ 196.921788] RSP: 0018:ffff88041fc83da8 EFLAGS: 00010046 [ 196.921788] RAX: 0000000000000000 RBX: 00000000fffffffb RCX: 00000001802a0002 [ 196.921788] RDX: 00000001802a0003 RSI: 0000000000000000 RDI: ffff8800299ff9e8 [ 196.921788] RBP: ffff88041fc83dc0 R08: ffffea00096cc980 R09: ffff8804097f5100 [ 196.921788] R10: ffffea000aeb8280 R11: ffffffff8143841e R12: ffff88025b326780 [ 196.921788] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000003000 [ 196.921788] FS: 0000000000000000(0000) GS:ffff88041fc80000(0000) knlGS:0000000000000000 [ 196.921788] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 196.921788] CR2: 00007f16e7a1948f CR3: 000000007f85e000 CR4: 00000000000006e0 [ 196.921788] Stack: [ 196.921788] ffff8800299ff9e8 ffff8800299ff9e8 ffff88025b326780 ffff88041fc83de8 [ 196.921788] ffffffff81438429 00000000fffffffb ffff8803d36e6c00 0000000000000000 [ 196.921788] ffff88041fc83e10 ffffffff811ef063 ffff8802bae0a1e8 ffff8802bae0a1e8 [ 196.921788] Call Trace: [ 196.921788] [ 196.921788] [] btrfs_end_bio+0x116/0x11d [ 196.921788] [] bio_endio+0x63/0x6a [ 196.921788] [] blk_mq_complete_request+0x89/0xfe [ 196.921788] [] __blk_mq_end_io+0x16/0x18 [ 196.921788] [] blk_mq_end_io+0x20/0xb1 [ 196.921788] [] virtblk_done+0xa4/0xf6 [ 196.921788] [] vring_interrupt+0x7c/0x8a [ 196.921788] [] handle_irq_event_percpu+0x4a/0x1bc [ 196.921788] [] handle_irq_event+0x45/0x61 [ 196.921788] [] handle_edge_irq+0xd9/0xfb [ 196.921788] [] handle_irq+0x21/0x2a [ 196.921788] [] do_IRQ+0x4d/0xb4 [ 196.921788] [] common_interrupt+0x72/0x72 [ 196.921788] [ 196.921788] [] ? native_safe_halt+0x6/0x8 [ 196.921788] [] default_idle+0x38/0xc1 [ 196.921788] [] arch_cpu_idle+0x18/0x28 [ 196.921788] [] cpu_startup_entry+0x178/0x269 [ 196.921788] [] ? clockevents_register_device+0x112/0x117 [ 196.921788] [] start_secondary+0x277/0x279 [ 196.921788] Code: ff ff eb bb 5b 41 5c 41 5d 41 5e 5d c3 0f 1f 44 00 00 55 48 89 e5 41 54 53 53 bb fb ff ff ff 48 85 ff 74 4c 8b 47 44 85 c0 7f 02 <0f> 0b 85 f6 74 07 f0 80 67 10 fe eb 09 48 8b 47 10 a8 01 0f 44 [ 196.921788] RIP [] bio_endio+0x1e/0x6a [ 196.921788] RSP [ 196.921788] ---[ end trace 0ec0fc28f7931a30 ]--- [ 196.921788] Kernel panic - not syncing: Fatal exception in interrupt [ 196.921788] Rebooting in 10 seconds.. Thanks, Fengguang --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg-dd [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.13.0-rc5-next-20131224-06549-g1ba337c (kbuild@inn) (gcc version 4.8.1 (Debian 4.8.1-8) ) #2 SMP Tue Dec 24 14:39:32 CST 2013 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf30afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf30b000-0x00000000bf38afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf38b000-0x00000000bf3a0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf3a1000-0x00000000bf3a1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3a2000-0x00000000bf3b2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf3b3000-0x00000000bf3b5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3b6000-0x00000000bf3dcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf3dd000-0x00000000bf3ddfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf3de000-0x00000000bf3defff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3df000-0x00000000bf413fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf414000-0x00000000bf415fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf416000-0x00000000bf417fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf418000-0x00000000bf41ffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf420000-0x00000000bf420fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf421000-0x00000000bf422fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf423000-0x00000000bf42afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf42b000-0x00000000bf453fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf454000-0x00000000bf656fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf657000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/06/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FC00000000 write-back [ 0.000000] 1 base 0400000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fcf20-0x000fcf2f] mapped at [ffff8800000fcf20] [ 0.000000] mpc: fc9f0-fcea4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0265d000, 0x0265dfff] PGTABLE [ 0.000000] BRK [0x0265e000, 0x0265efff] PGTABLE [ 0.000000] BRK [0x0265f000, 0x0265ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff] [ 0.000000] [mem 0x43fe00000-0x43fffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43fdfffff] [ 0.000000] [mem 0x43c000000-0x43fdfffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] [mem 0x400000000-0x43bffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf30afff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbf1fffff] page 2M [ 0.000000] [mem 0xbf200000-0xbf30afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbf3dd000-0xbf3ddfff] [ 0.000000] [mem 0xbf3dd000-0xbf3ddfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbf657000-0xbf7fffff] [ 0.000000] [mem 0xbf657000-0xbf7fffff] page 4k [ 0.000000] BRK [0x02660000, 0x02660fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x743a0000-0x7fff2fff] [ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 A M I) [ 0.000000] ACPI: XSDT 00000000bf421e18 00008C (v01 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf41fd98 0000F4 (v04 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20131115/tbfadt-395) [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xBF420F40/0x00000000BF420E40, using 32 (20131115/tbfadt-522) [ 0.000000] ACPI: DSDT 00000000bf418018 00601B (v01 A M I ALASKA 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf420f40 000040 [ 0.000000] ACPI: APIC 00000000bf41fc18 000130 (v02 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bf415798 0006EE (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bf422f18 00003C (v01 A M I OEMMCFG 01072009 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf414c98 000228 (v01 A M I AMI SRAT 00000001 AMI. 00000000) [ 0.000000] ACPI: SLIT 00000000bf422e98 000030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) [ 0.000000] ACPI: HPET 00000000bf422e18 000038 (v01 A M I ICH7HPET 01072009 AMI. 00000003) [ 0.000000] ACPI: SPMI 00000000bf422d98 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.000000] ACPI: EINJ 00000000bf41fa98 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 00000000bf414a18 000210 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 00000000bf414f18 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 00000000bf422d18 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bf415f18 0000D4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x23fffffff] [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x240000000-0x43fffffff] [ 0.000000] NUMA: Initialized distance table, cnt=2 [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x23fffffff] -> [mem 0x00000000-0x23fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x23fffb000-0x23fffffff] [ 0.000000] Initmem setup node 1 [mem 0x240000000-0x43fffffff] [ 0.000000] NODE_DATA [mem 0x43fff8000-0x43fffcfff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237e00000-ffff88023fdfffff] on node 0 [ 0.000000] [ffffea0009000000-ffffea0010ffffff] PMD -> [ffff880437600000-ffff88043f5fffff] on node 1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009bfff] [ 0.000000] node 0: [mem 0x00100000-0xbf30afff] [ 0.000000] node 0: [mem 0xbf3dd000-0xbf3ddfff] [ 0.000000] node 0: [mem 0xbf657000-0xbf7fffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] node 1: [mem 0x240000000-0x43fffffff] [ 0.000000] On node 0 totalpages: 2094160 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12179 pages used for memmap [ 0.000000] DMA32 zone: 779445 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] Normal zone: 32768 pages used for memmap [ 0.000000] Normal zone: 2097152 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec90000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 4, version 32, address 0xfec90000, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 24 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5f1000 (fec01000) [ 0.000000] mapped IOAPIC to ffffffffff5f0000 (fec02000) [ 0.000000] mapped IOAPIC to ffffffffff5ef000 (fec90000) [ 0.000000] nr_irqs_gsi: 112 [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf30b000-0xbf38afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf38b000-0xbf3a0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3a1000-0xbf3a1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3a2000-0xbf3b2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3b3000-0xbf3b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3b6000-0xbf3dcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3de000-0xbf3defff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3df000-0xbf413fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf414000-0xbf415fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf416000-0xbf417fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf418000-0xbf41ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf420000-0xbf420fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf421000-0xbf422fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf423000-0xbf42afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf42b000-0xbf453fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf454000-0xbf656fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:24 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880237c00000 s80960 r8192 d21440 u131072 [ 0.000000] pcpu-alloc: s80960 r8192 d21440 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 07 08 09 10 11 18 19 20 21 22 23 -- -- -- -- [ 0.000000] pcpu-alloc: [1] 01 02 03 04 05 06 12 13 14 15 16 17 -- -- -- -- [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4125800 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/lkp-ws02/reconfirm_dd-write-11HDD-RAID5-cfq-btrfs-1dd-x86_64-lkp-1ba337ca6cd05ea33029692dc837a43c05108cb7-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/vmlinuz-3.13.0-rc5-next-20131224-06549-g1ba337c kconfig=x86_64-lkp commit=1ba337ca6cd05ea33029692dc837a43c05108cb7 modules_initrd=/kernel/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/modules.cgz max_uptime=1200 RESULT_ROOT=/lkp/result/lkp-ws02/micro/dd-write/11HDD-RAID5-cfq-btrfs-1dd/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/1 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::lkp-ws02::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16218204K/16765248K available (10428K kernel code, 1242K rwdata, 4148K rodata, 1436K init, 1732K bss, 547044K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=24. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24 [ 0.000000] NR_IRQS:33024 nr_irqs:2096 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.13.0-rc5-next-20131224-06549-g1ba337c (kbuild@inn) (gcc version 4.8.1 (Debian 4.8.1-8) ) #2 SMP Tue Dec 24 14:39:32 CST 2013 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/lkp-ws02/reconfirm_dd-write-11HDD-RAID5-cfq-btrfs-1dd-x86_64-lkp-1ba337ca6cd05ea33029692dc837a43c05108cb7-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/vmlinuz-3.13.0-rc5-next-20131224-06549-g1ba337c kconfig=x86_64-lkp commit=1ba337ca6cd05ea33029692dc837a43c05108cb7 modules_initrd=/kernel/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/modules.cgz max_uptime=1200 RESULT_ROOT=/lkp/result/lkp-ws02/micro/dd-write/11HDD-RAID5-cfq-btrfs-1dd/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/1 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::lkp-ws02::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf30afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf30b000-0x00000000bf38afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf38b000-0x00000000bf3a0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf3a1000-0x00000000bf3a1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3a2000-0x00000000bf3b2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf3b3000-0x00000000bf3b5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3b6000-0x00000000bf3dcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf3dd000-0x00000000bf3ddfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf3de000-0x00000000bf3defff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3df000-0x00000000bf413fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf414000-0x00000000bf415fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf416000-0x00000000bf417fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf418000-0x00000000bf41ffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf420000-0x00000000bf420fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf421000-0x00000000bf422fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf423000-0x00000000bf42afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf42b000-0x00000000bf453fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf454000-0x00000000bf656fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf657000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/06/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FC00000000 write-back [ 0.000000] 1 base 0400000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fcf20-0x000fcf2f] mapped at [ffff8800000fcf20] [ 0.000000] mpc: fc9f0-fcea4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0265d000, 0x0265dfff] PGTABLE [ 0.000000] BRK [0x0265e000, 0x0265efff] PGTABLE [ 0.000000] BRK [0x0265f000, 0x0265ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff] [ 0.000000] [mem 0x43fe00000-0x43fffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43fdfffff] [ 0.000000] [mem 0x43c000000-0x43fdfffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] [mem 0x400000000-0x43bffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf30afff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbf1fffff] page 2M [ 0.000000] [mem 0xbf200000-0xbf30afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbf3dd000-0xbf3ddfff] [ 0.000000] [mem 0xbf3dd000-0xbf3ddfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbf657000-0xbf7fffff] [ 0.000000] [mem 0xbf657000-0xbf7fffff] page 4k [ 0.000000] BRK [0x02660000, 0x02660fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x743a0000-0x7fff2fff] [ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 A M I) [ 0.000000] ACPI: XSDT 00000000bf421e18 00008C (v01 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf41fd98 0000F4 (v04 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20131115/tbfadt-395) [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xBF420F40/0x00000000BF420E40, using 32 (20131115/tbfadt-522) [ 0.000000] ACPI: DSDT 00000000bf418018 00601B (v01 A M I ALASKA 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf420f40 000040 [ 0.000000] ACPI: APIC 00000000bf41fc18 000130 (v02 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bf415798 0006EE (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bf422f18 00003C (v01 A M I OEMMCFG 01072009 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf414c98 000228 (v01 A M I AMI SRAT 00000001 AMI. 00000000) [ 0.000000] ACPI: SLIT 00000000bf422e98 000030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) [ 0.000000] ACPI: HPET 00000000bf422e18 000038 (v01 A M I ICH7HPET 01072009 AMI. 00000003) [ 0.000000] ACPI: SPMI 00000000bf422d98 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.000000] ACPI: EINJ 00000000bf41fa98 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 00000000bf414a18 000210 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 00000000bf414f18 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 00000000bf422d18 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bf415f18 0000D4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x23fffffff] [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x240000000-0x43fffffff] [ 0.000000] NUMA: Initialized distance table, cnt=2 [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x23fffffff] -> [mem 0x00000000-0x23fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x23fffb000-0x23fffffff] [ 0.000000] Initmem setup node 1 [mem 0x240000000-0x43fffffff] [ 0.000000] NODE_DATA [mem 0x43fff8000-0x43fffcfff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237e00000-ffff88023fdfffff] on node 0 [ 0.000000] [ffffea0009000000-ffffea0010ffffff] PMD -> [ffff880437600000-ffff88043f5fffff] on node 1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009bfff] [ 0.000000] node 0: [mem 0x00100000-0xbf30afff] [ 0.000000] node 0: [mem 0xbf3dd000-0xbf3ddfff] [ 0.000000] node 0: [mem 0xbf657000-0xbf7fffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] node 1: [mem 0x240000000-0x43fffffff] [ 0.000000] On node 0 totalpages: 2094160 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12179 pages used for memmap [ 0.000000] DMA32 zone: 779445 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] Normal zone: 32768 pages used for memmap [ 0.000000] Normal zone: 2097152 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec90000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 4, version 32, address 0xfec90000, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 24 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5f1000 (fec01000) [ 0.000000] mapped IOAPIC to ffffffffff5f0000 (fec02000) [ 0.000000] mapped IOAPIC to ffffffffff5ef000 (fec90000) [ 0.000000] nr_irqs_gsi: 112 [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf30b000-0xbf38afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf38b000-0xbf3a0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3a1000-0xbf3a1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3a2000-0xbf3b2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3b3000-0xbf3b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3b6000-0xbf3dcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3de000-0xbf3defff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3df000-0xbf413fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf414000-0xbf415fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf416000-0xbf417fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf418000-0xbf41ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf420000-0xbf420fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf421000-0xbf422fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf423000-0xbf42afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf42b000-0xbf453fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf454000-0xbf656fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:24 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880237c00000 s80960 r8192 d21440 u131072 [ 0.000000] pcpu-alloc: s80960 r8192 d21440 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 07 08 09 10 11 18 19 20 21 22 23 -- -- -- -- [ 0.000000] pcpu-alloc: [1] 01 02 03 04 05 06 12 13 14 15 16 17 -- -- -- -- [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4125800 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/lkp-ws02/reconfirm_dd-write-11HDD-RAID5-cfq-btrfs-1dd-x86_64-lkp-1ba337ca6cd05ea33029692dc837a43c05108cb7-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/vmlinuz-3.13.0-rc5-next-20131224-06549-g1ba337c kconfig=x86_64-lkp commit=1ba337ca6cd05ea33029692dc837a43c05108cb7 modules_initrd=/kernel/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/modules.cgz max_uptime=1200 RESULT_ROOT=/lkp/result/lkp-ws02/micro/dd-write/11HDD-RAID5-cfq-btrfs-1dd/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/1 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::lkp-ws02::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16218204K/16765248K available (10428K kernel code, 1242K rwdata, 4148K rodata, 1436K init, 1732K bss, 547044K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=24. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24 [ 0.000000] NR_IRQS:33024 nr_irqs:2096 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2800.059 MHz processor [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.11 BogoMIPS (lpj=11200236) [ 0.010825] pid_max: default: 32768 minimum: 301 [ 0.016622] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.027181] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.035761] Mount-cache hash table entries: 256 [ 0.040578] Initializing cgroup subsys memory [ 0.045005] Initializing cgroup subsys devices [ 0.049710] Initializing cgroup subsys freezer [ 0.054420] Initializing cgroup subsys blkio [ 0.058956] Initializing cgroup subsys perf_event [ 0.063928] Initializing cgroup subsys hugetlb [ 0.068670] CPU: Physical Processor ID: 1 [ 0.072946] CPU: Processor Core ID: 0 [ 0.076875] mce: CPU supports 9 MCE banks [ 0.081157] CPU0: Thermal LVT vector (0xfa) already installed [ 0.087178] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.087178] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.087178] tlb_flushall_shift: 6 [ 0.102404] Freeing SMP alternatives memory: 44K (ffffffff8249f000 - ffffffff824aa000) [ 0.112102] ACPI: Core revision 20131115 [ 0.119433] ACPI: All ACPI Tables successfully acquired [ 0.125057] ftrace: allocating 39790 entries in 156 pages [ 0.147423] Getting VERSION: 1060015 [ 0.151262] Getting VERSION: 1060015 [ 0.155104] Getting ID: 20000000 [ 0.158599] Getting ID: 20000000 [ 0.162087] Switched APIC routing to physical flat. [ 0.167231] masked ExtINT on CPU#0 [ 0.171428] ENABLING IO-APIC IRQs [ 0.175011] init IO_APIC IRQs [ 0.178246] apic 0 pin 0 not connected [ 0.182352] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:32) [ 0.190843] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:32) [ 0.199327] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:32) [ 0.207825] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:32) [ 0.216310] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:32) [ 0.224793] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:32) [ 0.233284] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:32) [ 0.241767] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:32) [ 0.250252] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:32) [ 0.258742] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:32) [ 0.267399] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:32) [ 0.276064] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:32) [ 0.284720] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:32) [ 0.293384] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:32) [ 0.302051] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:32) [ 0.310705] apic 0 pin 16 not connected [ 0.314892] apic 0 pin 17 not connected [ 0.319083] apic 0 pin 18 not connected [ 0.323271] apic 0 pin 19 not connected [ 0.327460] apic 0 pin 20 not connected [ 0.331650] apic 0 pin 21 not connected [ 0.335840] apic 0 pin 22 not connected [ 0.340030] apic 0 pin 23 not connected [ 0.344219] apic 2 pin 0 not connected [ 0.348320] apic 2 pin 1 not connected [ 0.352425] apic 2 pin 2 not connected [ 0.356527] apic 2 pin 3 not connected [ 0.360629] apic 2 pin 4 not connected [ 0.364732] apic 2 pin 5 not connected [ 0.368835] apic 2 pin 6 not connected [ 0.372937] apic 2 pin 7 not connected [ 0.377041] apic 2 pin 8 not connected [ 0.381143] apic 2 pin 9 not connected [ 0.385246] apic 2 pin 10 not connected [ 0.389434] apic 2 pin 11 not connected [ 0.393624] apic 2 pin 12 not connected [ 0.397815] apic 2 pin 13 not connected [ 0.402003] apic 2 pin 14 not connected [ 0.406193] apic 2 pin 15 not connected [ 0.410382] apic 2 pin 16 not connected [ 0.414573] apic 2 pin 17 not connected [ 0.418761] apic 2 pin 18 not connected [ 0.422951] apic 2 pin 19 not connected [ 0.427140] apic 2 pin 20 not connected [ 0.431330] apic 2 pin 21 not connected [ 0.435519] apic 2 pin 22 not connected [ 0.439707] apic 2 pin 23 not connected [ 0.443897] apic 3 pin 0 not connected [ 0.447999] apic 3 pin 1 not connected [ 0.452103] apic 3 pin 2 not connected [ 0.456205] apic 3 pin 3 not connected [ 0.460308] apic 3 pin 4 not connected [ 0.464411] apic 3 pin 5 not connected [ 0.468514] apic 3 pin 6 not connected [ 0.472616] apic 3 pin 7 not connected [ 0.476718] apic 3 pin 8 not connected [ 0.480821] apic 3 pin 9 not connected [ 0.484924] apic 3 pin 10 not connected [ 0.489114] apic 3 pin 11 not connected [ 0.493303] apic 3 pin 12 not connected [ 0.497493] apic 3 pin 13 not connected [ 0.501683] apic 3 pin 14 not connected [ 0.505872] apic 3 pin 15 not connected [ 0.510062] apic 3 pin 16 not connected [ 0.514249] apic 3 pin 17 not connected [ 0.518440] apic 3 pin 18 not connected [ 0.522628] apic 3 pin 19 not connected [ 0.526819] apic 3 pin 20 not connected [ 0.531008] apic 3 pin 21 not connected [ 0.535198] apic 3 pin 22 not connected [ 0.539388] apic 3 pin 23 not connected [ 0.543575] apic 4 pin 0 not connected [ 0.547678] apic 4 pin 1 not connected [ 0.551783] apic 4 pin 2 not connected [ 0.555885] apic 4 pin 3 not connected [ 0.559988] apic 4 pin 4 not connected [ 0.564090] apic 4 pin 5 not connected [ 0.568191] apic 4 pin 6 not connected [ 0.572296] apic 4 pin 7 not connected [ 0.576399] apic 4 pin 8 not connected [ 0.580501] apic 4 pin 9 not connected [ 0.584603] apic 4 pin 10 not connected [ 0.588791] apic 4 pin 11 not connected [ 0.592973] apic 4 pin 12 not connected [ 0.597162] apic 4 pin 13 not connected [ 0.601351] apic 4 pin 14 not connected [ 0.605542] apic 4 pin 15 not connected [ 0.609731] apic 4 pin 16 not connected [ 0.613921] apic 4 pin 17 not connected [ 0.618109] apic 4 pin 18 not connected [ 0.622299] apic 4 pin 19 not connected [ 0.626488] apic 4 pin 20 not connected [ 0.630677] apic 4 pin 21 not connected [ 0.634867] apic 4 pin 22 not connected [ 0.639057] apic 4 pin 23 not connected [ 0.643375] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.689363] smpboot: CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz (fam: 06, model: 2c, stepping: 01) [ 0.699946] Using local APIC timer interrupts. [ 0.699946] calibrating APIC timer ... [ 0.814342] ... lapic delta = 833352 [ 0.818177] ... PM-Timer delta = 357949 [ 0.822280] ... PM-Timer result ok [ 0.825949] ..... delta 833352 [ 0.829270] ..... mult: 35792195 [ 0.832758] ..... calibration result: 533345 [ 0.837293] ..... CPU clock speed is 2800.0224 MHz. [ 0.842436] ..... host bus clock speed is 133.1345 MHz. [ 0.847939] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.857036] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.864175] ... version: 3 [ 0.868451] ... bit width: 48 [ 0.872813] ... generic registers: 4 [ 0.877091] ... value mask: 0000ffffffffffff [ 0.882666] ... max period: 000000007fffffff [ 0.888245] ... fixed-purpose events: 3 [ 0.892520] ... event mask: 000000070000000f [ 0.899781] x86: Booting SMP configuration: [ 0.904233] .... node #0, CPUs: #1 [ 0.919354] masked ExtINT on CPU#1 [ 0.922785] CPU1: Thermal LVT vector (0xfa) already installed #2 [ 1.039648] masked ExtINT on CPU#2 [ 1.043084] CPU2: Thermal LVT vector (0xfa) already installed #3 [ 1.062415] masked ExtINT on CPU#3 [ 1.065844] CPU3: Thermal LVT vector (0xfa) already installed #4 [ 1.085184] masked ExtINT on CPU#4 [ 1.088613] CPU4: Thermal LVT vector (0xfa) already installed #5 [ 1.107954] masked ExtINT on CPU#5 [ 1.111388] CPU5: Thermal LVT vector (0xfa) already installed #6 [ 1.130712] masked ExtINT on CPU#6 [ 1.134139] CPU6: Thermal LVT vector (0xfa) already installed [ 1.142505] .... node #1, CPUs: #7 [ 1.157221] masked ExtINT on CPU#7 [ 1.160656] CPU7: Thermal LVT vector (0xfa) already installed #8 [ 1.180034] masked ExtINT on CPU#8 [ 1.183473] CPU8: Thermal LVT vector (0xfa) already installed #9 [ 1.202848] masked ExtINT on CPU#9 [ 1.206282] CPU9: Thermal LVT vector (0xfa) already installed #10 [ 1.225667] masked ExtINT on CPU#10 [ 1.229189] CPU10: Thermal LVT vector (0xfa) already installed #11 [ 1.248687] masked ExtINT on CPU#11 [ 1.252210] CPU11: Thermal LVT vector (0xfa) already installed [ 1.260721] .... node #0, CPUs: #12 [ 1.275436] masked ExtINT on CPU#12 [ 1.278957] CPU12: Thermal LVT vector (0xfa) already installed #13 [ 1.298411] masked ExtINT on CPU#13 [ 1.301934] CPU13: Thermal LVT vector (0xfa) already installed #14 [ 1.321379] masked ExtINT on CPU#14 [ 1.324899] CPU14: Thermal LVT vector (0xfa) already installed #15 [ 1.344357] masked ExtINT on CPU#15 [ 1.347879] CPU15: Thermal LVT vector (0xfa) already installed #16 [ 1.367323] masked ExtINT on CPU#16 [ 1.370835] CPU16: Thermal LVT vector (0xfa) already installed #17 [ 1.390293] masked ExtINT on CPU#17 [ 1.393811] CPU17: Thermal LVT vector (0xfa) already installed [ 1.402275] .... node #1, CPUs: #18 [ 1.416999] masked ExtINT on CPU#18 [ 1.420523] CPU18: Thermal LVT vector (0xfa) already installed #19 [ 1.440029] masked ExtINT on CPU#19 [ 1.443550] CPU19: Thermal LVT vector (0xfa) already installed #20 [ 1.463050] masked ExtINT on CPU#20 [ 1.466574] CPU20: Thermal LVT vector (0xfa) already installed #21 [ 1.486062] masked ExtINT on CPU#21 [ 1.489584] CPU21: Thermal LVT vector (0xfa) already installed #22 [ 1.509090] masked ExtINT on CPU#22 [ 1.512614] CPU22: Thermal LVT vector (0xfa) already installed #23 [ 1.532109] masked ExtINT on CPU#23 [ 1.535635] CPU23: Thermal LVT vector (0xfa) already installed [ 1.543600] x86: Booted up 2 nodes, 24 CPUs [ 1.548509] smpboot: Total of 24 processors activated (134404.46 BogoMIPS) [ 1.583938] devtmpfs: initialized [ 1.592228] PM: Registering ACPI NVS region [mem 0xbf30b000-0xbf38afff] (524288 bytes) [ 1.600644] PM: Registering ACPI NVS region [mem 0xbf3a1000-0xbf3a1fff] (4096 bytes) [ 1.608874] PM: Registering ACPI NVS region [mem 0xbf3b3000-0xbf3b5fff] (12288 bytes) [ 1.617187] PM: Registering ACPI NVS region [mem 0xbf3de000-0xbf3defff] (4096 bytes) [ 1.625410] PM: Registering ACPI NVS region [mem 0xbf416000-0xbf417fff] (8192 bytes) [ 1.633634] PM: Registering ACPI NVS region [mem 0xbf420000-0xbf420fff] (4096 bytes) [ 1.641855] PM: Registering ACPI NVS region [mem 0xbf423000-0xbf42afff] (32768 bytes) [ 1.656601] PM: Registering ACPI NVS region [mem 0xbf454000-0xbf656fff] (2109440 bytes) [ 1.666510] xor: measuring software checksum speed [ 1.708623] prefetch64-sse: 11587.000 MB/sec [ 1.752659] generic_sse: 10189.000 MB/sec [ 1.757200] xor: using function: prefetch64-sse (11587.000 MB/sec) [ 1.763659] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 1.770877] NET: Registered protocol family 16 [ 1.776235] cpuidle: using governor ladder [ 1.780603] cpuidle: using governor menu [ 1.785186] ACPI: bus type PCI registered [ 1.789466] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.796264] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 1.806060] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 1.829583] PCI: Using configuration type 1 for base access [ 1.846275] bio: create slab at 0 [ 1.916793] raid6: sse2x1 6727 MB/s [ 1.988850] raid6: sse2x2 7990 MB/s [ 2.060907] raid6: sse2x4 8839 MB/s [ 2.064926] raid6: using algorithm sse2x4 (8839 MB/s) [ 2.070242] raid6: using ssse3x2 recovery algorithm [ 2.075465] ACPI: Added _OSI(Module Device) [ 2.079918] ACPI: Added _OSI(Processor Device) [ 2.084623] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.089593] ACPI: Added _OSI(Processor Aggregator Device) [ 2.097202] ACPI: Executed 1 blocks of module-level executable AML code [ 2.106384] \_SB_:_OSC evaluation returned wrong type [ 2.111704] _OSC request data:1 17 [ 2.124994] ACPI: SSDT 00000000bf416018 001494 (v01 AMI IST 00000001 MSFT 03000001) [ 2.134581] ACPI: Dynamic OEM Table Load: [ 2.138988] ACPI: SSDT (null) 001494 (v01 AMI IST 00000001 MSFT 03000001) [ 2.150454] ACPI: Interpreter enabled [ 2.154395] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 2.164230] ACPI: (supports S0 S1 S3 S4 S5) [ 2.168681] ACPI: Using IOAPIC for interrupt routing [ 2.174027] HEST: Table parsing has been initialized. [ 2.179353] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.189066] ACPI: No dock devices found. [ 2.194416] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.208847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.215300] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.224160] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 2.232952] PCI host bridge to bus 0000:00 [ 2.237320] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.243078] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.249530] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.255975] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.263121] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 2.270272] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000 [ 2.276601] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 2.283069] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 2.289395] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.295868] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 2.302193] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 2.308661] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400 [ 2.314987] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 2.321456] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 2.327782] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 2.334249] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400 [ 2.340577] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 2.347044] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020 [ 2.353331] pci 0000:00:13.0: reg 0x10: [mem 0xfbe24000-0xfbe24fff] [ 2.359909] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 2.366368] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 2.372776] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 2.379183] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 2.385579] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000 [ 2.391976] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000 [ 2.398261] pci 0000:00:16.0: reg 0x10: [mem 0xfbe1c000-0xfbe1ffff 64bit] [ 2.405454] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000 [ 2.411738] pci 0000:00:16.1: reg 0x10: [mem 0xfbe18000-0xfbe1bfff 64bit] [ 2.418936] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000 [ 2.425219] pci 0000:00:16.2: reg 0x10: [mem 0xfbe14000-0xfbe17fff 64bit] [ 2.432413] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000 [ 2.438696] pci 0000:00:16.3: reg 0x10: [mem 0xfbe10000-0xfbe13fff 64bit] [ 2.445892] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000 [ 2.452177] pci 0000:00:16.4: reg 0x10: [mem 0xfbe0c000-0xfbe0ffff 64bit] [ 2.459370] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000 [ 2.465656] pci 0000:00:16.5: reg 0x10: [mem 0xfbe08000-0xfbe0bfff 64bit] [ 2.472849] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000 [ 2.479136] pci 0000:00:16.6: reg 0x10: [mem 0xfbe04000-0xfbe07fff 64bit] [ 2.486330] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000 [ 2.492615] pci 0000:00:16.7: reg 0x10: [mem 0xfbe00000-0xfbe03fff 64bit] [ 2.499811] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 2.506130] pci 0000:00:1a.0: reg 0x20: [io 0xf0c0-0xf0df] [ 2.512059] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.518055] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 2.524369] pci 0000:00:1a.2: reg 0x20: [io 0xf0a0-0xf0bf] [ 2.530299] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 2.536299] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 2.542591] pci 0000:00:1a.7: reg 0x10: [mem 0xfbe23000-0xfbe233ff] [ 2.549209] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.555623] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 2.561615] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 2.567957] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.574366] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 2.580362] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 2.586701] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.593109] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 2.599106] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 2.605417] pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f] [ 2.611345] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.617334] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 2.623650] pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f] [ 2.629577] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 2.635569] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 2.641881] pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f] [ 2.647810] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 2.653811] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 2.660104] pci 0000:00:1d.7: reg 0x10: [mem 0xfbe22000-0xfbe223ff] [ 2.666722] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.673132] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 2.679124] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.685488] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 2.691479] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 2.697827] pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000] [ 2.711964] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 2.719370] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff) [ 2.727419] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 2.735470] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f) [ 2.743527] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 2.751707] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 2.758000] pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117] [ 2.763846] pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103] [ 2.769690] pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7] [ 2.775537] pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3] [ 2.781384] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 2.787231] pci 0000:00:1f.2: reg 0x24: [mem 0xfbe21000-0xfbe217ff] [ 2.793803] pci 0000:00:1f.2: PME# supported from D3hot [ 2.799404] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 2.805694] pci 0000:00:1f.3: reg 0x10: [mem 0xfbe20000-0xfbe200ff 64bit] [ 2.812767] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 2.818783] pci 0000:01:00.0: [8086:10c9] type 00 class 0x020000 [ 2.825070] pci 0000:01:00.0: reg 0x10: [mem 0xfbaa0000-0xfbabffff] [ 2.831615] pci 0000:01:00.0: reg 0x14: [mem 0xfba80000-0xfba9ffff] [ 2.838163] pci 0000:01:00.0: reg 0x18: [io 0xe020-0xe03f] [ 2.844010] pci 0000:01:00.0: reg 0x1c: [mem 0xfbb44000-0xfbb47fff] [ 2.850562] pci 0000:01:00.0: reg 0x30: [mem 0xfba60000-0xfba7ffff pref] [ 2.857584] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.863977] pci 0000:01:00.0: reg 0x184: [mem 0xfbb20000-0xfbb23fff 64bit] [ 2.871139] pci 0000:01:00.0: reg 0x190: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.878366] pci 0000:01:00.1: [8086:10c9] type 00 class 0x020000 [ 2.884650] pci 0000:01:00.1: reg 0x10: [mem 0xfba40000-0xfba5ffff] [ 2.891195] pci 0000:01:00.1: reg 0x14: [mem 0xfba20000-0xfba3ffff] [ 2.897735] pci 0000:01:00.1: reg 0x18: [io 0xe000-0xe01f] [ 2.903581] pci 0000:01:00.1: reg 0x1c: [mem 0xfbb40000-0xfbb43fff] [ 2.910134] pci 0000:01:00.1: reg 0x30: [mem 0xfba00000-0xfba1ffff pref] [ 2.917155] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 2.923543] pci 0000:01:00.1: reg 0x184: [mem 0xfbae0000-0xfbae3fff 64bit] [ 2.930703] pci 0000:01:00.1: reg 0x190: [mem 0xfbac0000-0xfbac3fff 64bit] [ 2.945624] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 2.951124] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 2.957492] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 2.964621] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.969919] pci 0000:00:05.0: PCI bridge to [bus 04] [ 2.975220] pci 0000:00:07.0: PCI bridge to [bus 05] [ 2.980541] pci 0000:06:00.0: [8086:0329] type 01 class 0x060400 [ 2.986832] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled [ 2.994019] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 3.000464] pci 0000:06:00.2: [8086:032a] type 01 class 0x060400 [ 3.006753] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled [ 3.013947] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold [ 3.020391] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 3.030886] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 3.036379] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 3.042738] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 3.056320] pci 0000:06:00.0: PCI bridge to [bus 07] [ 3.061648] pci 0000:08:01.0: [8086:1229] type 00 class 0x020000 [ 3.067940] pci 0000:08:01.0: reg 0x10: [mem 0xfb900000-0xfb900fff] [ 3.074479] pci 0000:08:01.0: reg 0x14: [io 0xd000-0xd03f] [ 3.080325] pci 0000:08:01.0: reg 0x18: [mem 0xfb800000-0xfb8fffff] [ 3.086886] pci 0000:08:01.0: reg 0x30: [mem 0xfb700000-0xfb7fffff pref] [ 3.093880] pci 0000:08:01.0: supports D1 D2 [ 3.098421] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.105416] pci 0000:06:00.2: PCI bridge to [bus 08] [ 3.110653] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 3.117019] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 3.124174] pci 0000:09:00.0: [1000:0058] type 00 class 0x010000 [ 3.130465] pci 0000:09:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 3.136322] pci 0000:09:00.0: reg 0x14: [mem 0xfb610000-0xfb613fff 64bit] [ 3.143391] pci 0000:09:00.0: reg 0x1c: [mem 0xfb600000-0xfb60ffff 64bit] [ 3.150464] pci 0000:09:00.0: reg 0x30: [mem 0xfb400000-0xfb5fffff pref] [ 3.157491] pci 0000:09:00.0: supports D1 D2 [ 3.162089] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 3.172579] pci 0000:00:1c.0: PCI bridge to [bus 09] [ 3.177813] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 3.184180] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 3.191242] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 3.199557] pci 0000:0a:00.0: [197b:2368] type 00 class 0x010185 [ 3.205855] pci 0000:0a:00.0: reg 0x10: [io 0xb040-0xb047] [ 3.211703] pci 0000:0a:00.0: reg 0x14: [io 0xb030-0xb033] [ 3.217557] pci 0000:0a:00.0: reg 0x18: [io 0xb020-0xb027] [ 3.223412] pci 0000:0a:00.0: reg 0x1c: [io 0xb010-0xb013] [ 3.229266] pci 0000:0a:00.0: reg 0x20: [io 0xb000-0xb00f] [ 3.235134] pci 0000:0a:00.0: reg 0x30: [mem 0xfbd00000-0xfbd0ffff pref] [ 3.242233] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 3.252727] pci 0000:00:1c.4: PCI bridge to [bus 0a] [ 3.257958] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 3.264325] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 3.271387] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 3.279688] pci 0000:0b:01.0: [1002:515e] type 00 class 0x030000 [ 3.285981] pci 0000:0b:01.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref] [ 3.292963] pci 0000:0b:01.0: reg 0x14: [io 0xa000-0xa0ff] [ 3.298809] pci 0000:0b:01.0: reg 0x18: [mem 0xfbc20000-0xfbc2ffff] [ 3.305371] pci 0000:0b:01.0: reg 0x30: [mem 0xfbc00000-0xfbc1ffff pref] [ 3.312365] pci 0000:0b:01.0: supports D1 D2 [ 3.316992] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode) [ 3.324052] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 3.330419] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 3.337481] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 3.345709] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 3.354114] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 3.362519] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 3.371619] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 3.381205] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 3.390302] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 3.399396] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 3.408486] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15), disabled. [ 3.417568] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 3.426892] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 3.436217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 3.445542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 3.454651] ACPI: Enabled 2 GPEs in block 00 to 3F [ 3.459986] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none [ 3.468565] vgaarb: loaded [ 3.471539] vgaarb: bridge control possible 0000:0b:01.0 [ 3.477230] SCSI subsystem initialized [ 3.481367] libata version 3.00 loaded. [ 3.485564] ACPI: bus type USB registered [ 3.489900] usbcore: registered new interface driver usbfs [ 3.495685] usbcore: registered new interface driver hub [ 3.501312] usbcore: registered new device driver usb [ 3.506720] pps_core: LinuxPPS API ver. 1 registered [ 3.511951] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.521589] PTP clock support registered [ 3.525958] EDAC MC: Ver: 3.0.0 [ 3.529576] PCI: Using ACPI for IRQ routing [ 3.539360] PCI: Discovered peer bus fe [ 3.543462] PCI: root bus fe: using default resources [ 3.548782] PCI: Probing PCI hardware (bus fe) [ 3.553546] PCI host bridge to bus 0000:fe [ 3.557916] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff] [ 3.564367] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff] [ 3.571688] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff] [ 3.580096] pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000 [ 3.586436] pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000 [ 3.592779] pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000 [ 3.599120] pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000 [ 3.605456] pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000 [ 3.611797] pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000 [ 3.618135] pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000 [ 3.624484] pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000 [ 3.630829] pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000 [ 3.637169] pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000 [ 3.643508] pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000 [ 3.649852] pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000 [ 3.656189] pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000 [ 3.662531] pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000 [ 3.668871] pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000 [ 3.675212] pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000 [ 3.681551] pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000 [ 3.687893] pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000 [ 3.694234] pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000 [ 3.700578] pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000 [ 3.706914] pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000 [ 3.713252] pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000 [ 3.719594] pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000 [ 3.725935] pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000 [ 3.732286] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe [ 3.739172] PCI: Discovered peer bus ff [ 3.743270] PCI: root bus ff: using default resources [ 3.748586] PCI: Probing PCI hardware (bus ff) [ 3.753346] PCI host bridge to bus 0000:ff [ 3.757712] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 3.764165] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff] [ 3.771477] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 3.779886] pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000 [ 3.786227] pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000 [ 3.792578] pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000 [ 3.798919] pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000 [ 3.805265] pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000 [ 3.811607] pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000 [ 3.817968] pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000 [ 3.824309] pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000 [ 3.830661] pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000 [ 3.837003] pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000 [ 3.843349] pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000 [ 3.849696] pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000 [ 3.856048] pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000 [ 3.862411] pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000 [ 3.868756] pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000 [ 3.875100] pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000 [ 3.881454] pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000 [ 3.887798] pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000 [ 3.894143] pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000 [ 3.900488] pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000 [ 3.906836] pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000 [ 3.913178] pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000 [ 3.919524] pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000 [ 3.925871] pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000 [ 3.932237] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 3.938867] PCI: pci_cache_line_size set to 64 bytes [ 3.944212] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] [ 3.950488] e820: reserve RAM buffer [mem 0xbf30b000-0xbfffffff] [ 3.956757] e820: reserve RAM buffer [mem 0xbf3de000-0xbfffffff] [ 3.963028] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 3.969868] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 3.975594] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 3.983742] Switched to clocksource hpet [ 3.997719] pnp: PnP ACPI init [ 4.001063] ACPI: bus type PNP registered [ 4.005453] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 4.012341] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 4.019227] system 00:00: [mem 0xfe000000-0xfe9fffff] has been reserved [ 4.026115] system 00:00: [mem 0xfea00000-0xfea0001f] has been reserved [ 4.033001] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 4.039888] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 4.047123] system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved [ 4.054010] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 4.061260] system 00:01: [io 0x0290-0x029f] has been reserved [ 4.067455] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.074542] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:32) [ 4.083101] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 4.097280] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:32) [ 4.105998] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 4.113963] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:32) [ 4.122459] pnp 00:04: [dma 0 disabled] [ 4.126648] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 4.133638] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:32) [ 4.142130] pnp 00:05: [dma 0 disabled] [ 4.146327] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 4.153218] pnp 00:06: [dma 4] [ 4.156595] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 4.163405] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:32) [ 4.171948] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 4.178810] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active) [ 4.185705] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 4.191897] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.198964] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:32) [ 4.207679] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 4.214695] system 00:0b: [io 0x0400-0x047f] could not be reserved [ 4.221232] system 00:0b: [io 0x1180-0x119f] has been reserved [ 4.227424] system 00:0b: [io 0x0500-0x057f] could not be reserved [ 4.233963] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 4.240849] system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved [ 4.248083] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 4.254972] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 4.262164] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) [ 4.269097] pnp: PnP ACPI: found 13 devices [ 4.273552] ACPI: bus type PNP unregistered [ 4.287214] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment [ 4.294622] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 4.300118] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 4.306488] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 4.313548] pci 0000:00:03.0: PCI bridge to [bus 03] [ 4.318790] pci 0000:00:05.0: PCI bridge to [bus 04] [ 4.324030] pci 0000:00:07.0: PCI bridge to [bus 05] [ 4.329267] pci 0000:06:00.0: PCI bridge to [bus 07] [ 4.334507] pci 0000:06:00.2: PCI bridge to [bus 08] [ 4.339740] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 4.346108] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 4.353170] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 4.358667] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 4.365033] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 4.372097] pci 0000:00:1c.0: PCI bridge to [bus 09] [ 4.377333] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 4.383700] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 4.390761] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 4.398994] pci 0000:00:1c.4: PCI bridge to [bus 0a] [ 4.404231] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 4.410598] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 4.417659] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 4.425890] pci 0000:00:1e.0: PCI bridge to [bus 0b] [ 4.431127] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 4.437495] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 4.444555] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 4.452789] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 4.458629] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 4.464467] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 4.471008] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 4.477548] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 4.483394] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbbfffff] [ 4.489933] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 4.495771] pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb9fffff] [ 4.502313] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 4.508157] pci_bus 0000:08: resource 1 [mem 0xfb700000-0xfb9fffff] [ 4.514690] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 4.520535] pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb6fffff] [ 4.527076] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 4.534785] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff] [ 4.540624] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 4.547163] pci_bus 0000:0a: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref] [ 4.554865] pci_bus 0000:0b: resource 0 [io 0xa000-0xafff] [ 4.560703] pci_bus 0000:0b: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 4.567244] pci_bus 0000:0b: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 4.574946] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] [ 4.580783] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] [ 4.586628] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] [ 4.593162] pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xffffffff] [ 4.599702] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff] [ 4.605547] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff] [ 4.612261] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 4.618106] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff] [ 4.624857] NET: Registered protocol family 2 [ 4.629699] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.637849] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.644993] TCP: Hash tables configured (established 131072 bind 65536) [ 4.651937] TCP: reno registered [ 4.655457] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 4.661883] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 4.668839] NET: Registered protocol family 1 [ 4.673596] RPC: Registered named UNIX socket transport module. [ 4.679786] RPC: Registered udp transport module. [ 4.684754] RPC: Registered tcp transport module. [ 4.689726] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.696604] IOAPIC[0]: Set routing entry (0-16 -> 0x41 -> IRQ 16 Mode:1 Active:1 Dest:32) [ 4.705481] IOAPIC[0]: Set routing entry (0-19 -> 0x51 -> IRQ 19 Mode:1 Active:1 Dest:32) [ 4.714351] IOAPIC[0]: Set routing entry (0-18 -> 0x61 -> IRQ 18 Mode:1 Active:1 Dest:32) [ 4.723231] IOAPIC[0]: Set routing entry (0-23 -> 0x71 -> IRQ 23 Mode:1 Active:1 Dest:32) [ 4.732618] pci 0000:06:00.0: rerouting interrupts for [8086:0329] [ 4.739073] pci 0000:06:00.2: rerouting interrupts for [8086:032a] [ 4.745541] pci 0000:0b:01.0: Boot video device [ 4.750385] PCI: CLS 64 bytes, default 64 [ 4.754704] Trying to unpack rootfs image as initramfs... [ 8.246251] Freeing initrd memory: 192844K (ffff8800743a0000 - ffff88007fff3000) [ 8.254147] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 8.260862] software IO TLB [mem 0xbb30b000-0xbf30b000] (64MB) mapped at [ffff8800bb30b000-ffff8800bf30afff] [ 8.271787] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 8.281897] Scanning for low memory corruption every 60 seconds [ 8.289099] SSE version of gcm_enc/dec engaged. [ 8.294512] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation [ 8.301035] AVX or AES-NI instructions are not detected. [ 8.306611] AVX instructions are not detected. [ 8.311323] AVX instructions are not detected. [ 8.316032] AVX instructions are not detected. [ 8.320742] AVX instructions are not detected. [ 8.348913] bounce pool size: 64 pages [ 8.352933] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 8.363345] VFS: Disk quotas dquot_6.5.2 [ 8.367621] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 8.375859] NFS: Registering the id_resolver key type [ 8.381198] Key type id_resolver registered [ 8.385646] Key type id_legacy registered [ 8.389927] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 8.396898] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.403909] ROMFS MTD (C) 2007 Red Hat, Inc. [ 8.408570] fuse init (API version 7.22) [ 8.412990] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 8.424076] bio: create slab at 1 [ 8.428727] Btrfs loaded [ 8.431540] msgmni has been set to 32052 [ 8.437848] NET: Registered protocol family 38 [ 8.442566] Key type asymmetric registered [ 8.447018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 8.454979] io scheduler noop registered [ 8.459175] io scheduler deadline registered [ 8.463717] io scheduler cfq registered (default) [ 8.469035] IOAPIC[3]: Set routing entry (4-4 -> 0x81 -> IRQ 76 Mode:1 Active:1 Dest:32) [ 8.477648] pcieport 0000:00:01.0: irq 112 for MSI/MSI-X [ 8.483455] IOAPIC[3]: Set routing entry (4-0 -> 0xa1 -> IRQ 72 Mode:1 Active:1 Dest:32) [ 8.492055] pcieport 0000:00:03.0: irq 113 for MSI/MSI-X [ 8.497850] IOAPIC[3]: Set routing entry (4-2 -> 0xc1 -> IRQ 74 Mode:1 Active:1 Dest:32) [ 8.506452] pcieport 0000:00:05.0: irq 114 for MSI/MSI-X [ 8.512245] IOAPIC[3]: Set routing entry (4-6 -> 0xe1 -> IRQ 78 Mode:1 Active:1 Dest:32) [ 8.520842] pcieport 0000:00:07.0: irq 115 for MSI/MSI-X [ 8.526644] IOAPIC[3]: Set routing entry (4-8 -> 0x42 -> IRQ 80 Mode:1 Active:1 Dest:32) [ 8.535240] pcieport 0000:00:09.0: irq 116 for MSI/MSI-X [ 8.541037] IOAPIC[0]: Set routing entry (0-17 -> 0x62 -> IRQ 17 Mode:1 Active:1 Dest:32) [ 8.549726] pcieport 0000:00:1c.0: irq 117 for MSI/MSI-X [ 8.555593] pcieport 0000:00:1c.4: irq 118 for MSI/MSI-X [ 8.561414] aer 0000:00:01.0:pcie02: service driver aer loaded [ 8.567541] aer 0000:00:03.0:pcie02: service driver aer loaded [ 8.573668] aer 0000:00:05.0:pcie02: service driver aer loaded [ 8.579794] aer 0000:00:07.0:pcie02: service driver aer loaded [ 8.585917] aer 0000:00:09.0:pcie02: service driver aer loaded [ 8.598494] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 8.605728] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 8.612526] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 8.619327] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 8.626307] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 8.633545] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 8.640532] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 8.647769] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded [ 8.654748] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt [ 8.661986] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded [ 8.668964] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 8.676192] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 8.682993] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt [ 8.689791] pci 0000:08:01.0: Signaling PME through PCIe PME interrupt [ 8.696594] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 8.703580] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 8.710818] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt [ 8.717619] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 8.724606] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 8.731842] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt [ 8.738645] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 8.745654] ioapic: probe of 0000:00:13.0 failed with error -22 [ 8.751879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.757803] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+ [ 8.768979] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 8.775611] pciehp 0000:00:1c.4:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+ [ 8.786783] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded [ 8.793437] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 8.800324] intel_idle: MWAIT substates: 0x1120 [ 8.805117] intel_idle: v0.4 model 0x2C [ 8.809222] intel_idle: lapic_timer_reliable_states 0xffffffff [ 8.816260] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 8.824922] ACPI: Sleep Button [SLPB] [ 8.828919] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 8.837577] ACPI: Power Button [PWRB] [ 8.841576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 8.849458] ACPI: Power Button [PWRF] [ 8.853568] ERST: Can not request [mem 0xbf3b303f-0xbf3b503e] for ERST. [ 8.891826] ghes_edac: This EDAC driver relies on BIOS to enumerate memory and get error reports. [ 8.901198] ghes_edac: Unfortunately, not all BIOSes reflect the memory layout correctly. [ 8.909862] ghes_edac: So, the end result of using this driver varies from vendor to vendor. [ 8.918787] ghes_edac: If you find incorrect reports, please contact your hardware vendor [ 8.927452] ghes_edac: to correct its BIOS. [ 8.931902] ghes_edac: This system has 18 DIMM sockets. [ 8.937826] EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 8.947912] EDAC MC1: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 8.957881] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. [ 8.967677] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 8.974238] EINJ: Error INJection is initialized. [ 8.979409] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 9.006331] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 9.034562] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 9.043129] Non-volatile memory driver v1.3 [ 9.050382] brd: module loaded [ 9.055021] loop: module loaded [ 9.058530] lkdtm: No crash points registered, enable through debugfs [ 9.065846] Loading iSCSI transport class v2.0-870. [ 9.071611] Adaptec aacraid driver 1.2-0[30200]-ms [ 9.076738] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 9.083982] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k. [ 9.092844] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 9.100772] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 9.108111] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013 [ 9.114961] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 9.121426] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 9.127388] ahci 0000:00:1f.2: version 3.0 [ 9.131892] ahci 0000:00:1f.2: irq 119 for MSI/MSI-X [ 9.137193] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 9.145860] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs [ 9.193670] scsi0 : ahci [ 9.196659] scsi1 : ahci [ 9.199619] scsi2 : ahci [ 9.202677] scsi3 : ahci [ 9.205802] scsi4 : ahci [ 9.208956] scsi5 : ahci [ 9.211930] ata1: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21100 irq 119 [ 9.219899] ata2: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21180 irq 119 [ 9.227869] ata3: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21200 irq 119 [ 9.235840] ata4: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21280 irq 119 [ 9.243811] ata5: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21300 irq 119 [ 9.251774] ata6: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21380 irq 119 [ 9.260665] tun: Universal TUN/TAP device driver, 1.6 [ 9.265990] tun: (C) 1999-2004 Max Krasnyansky [ 9.272686] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 9.279913] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 9.280078] tsc: Refined TSC clocksource calibration: 2800.096 MHz [ 9.292026] Copyright (c) 2007 Atheros Corporation. [ 9.297656] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 9.304731] v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 9.304731] http://www.scyld.com/network/drivers.html [ 9.317745] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 9.325008] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 9.331370] e100: Copyright(c) 1999-2006 Intel Corporation [ 9.337169] e100 0000:08:01.0: PCI IRQ 48 -> rerouted to legacy IRQ 16 [ 9.368249] e100 0000:08:01.0 eth0: addr 0xfb900000, irq 16, MAC addr 00:0e:0c:7f:c7:3e [ 9.376836] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 9.384160] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 9.390259] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 9.396365] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 9.402655] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 9.409888] igb: Copyright (c) 2007-2013 Intel Corporation. [ 9.416073] igb 0000:01:00.0: irq 120 for MSI/MSI-X [ 9.421228] igb 0000:01:00.0: irq 121 for MSI/MSI-X [ 9.426379] igb 0000:01:00.0: irq 122 for MSI/MSI-X [ 9.431531] igb 0000:01:00.0: irq 123 for MSI/MSI-X [ 9.436684] igb 0000:01:00.0: irq 124 for MSI/MSI-X [ 9.441834] igb 0000:01:00.0: irq 125 for MSI/MSI-X [ 9.446987] igb 0000:01:00.0: irq 126 for MSI/MSI-X [ 9.452140] igb 0000:01:00.0: irq 127 for MSI/MSI-X [ 9.457291] igb 0000:01:00.0: irq 128 for MSI/MSI-X [ 9.462496] igb 0000:01:00.0: irq 120 for MSI/MSI-X [ 9.467648] igb 0000:01:00.0: irq 121 for MSI/MSI-X [ 9.472801] igb 0000:01:00.0: irq 122 for MSI/MSI-X [ 9.477952] igb 0000:01:00.0: irq 123 for MSI/MSI-X [ 9.483105] igb 0000:01:00.0: irq 124 for MSI/MSI-X [ 9.488257] igb 0000:01:00.0: irq 125 for MSI/MSI-X [ 9.493410] igb 0000:01:00.0: irq 126 for MSI/MSI-X [ 9.498561] igb 0000:01:00.0: irq 127 for MSI/MSI-X [ 9.503713] igb 0000:01:00.0: irq 128 for MSI/MSI-X [ 9.576328] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.582795] ata4: SATA link down (SStatus 0 SControl 300) [ 9.588477] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.594937] ata3: SATA link down (SStatus 0 SControl 300) [ 9.600621] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.607097] ata5: SATA link down (SStatus 0 SControl 300) [ 9.612782] ata6.00: ATAPI: Slimtype DVD A DS8A2S, 6P5D, max UDMA/100 [ 9.619589] ata1.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 9.626658] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 9.636395] ata1.00: configured for UDMA/133 [ 9.640953] ata6.00: configured for UDMA/100 [ 9.641053] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 9.641781] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.642074] sd 0:0:0:0: [sda] Write Protect is off [ 9.642076] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.642196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.642205] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.683135] sda: sda1 sda2 sda3 [ 9.684512] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.696057] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 9.701998] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.710607] igb 0000:01:00.0: added PHC on eth1 [ 9.715412] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 9.722558] igb 0000:01:00.0: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:26 [ 9.729966] igb 0000:01:00.0: eth1: PBA No: Unknown [ 9.735108] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 9.743287] IOAPIC[3]: Set routing entry (4-16 -> 0x44 -> IRQ 88 Mode:1 Active:1 Dest:32) [ 9.743960] ata2.00: configured for UDMA/133 [ 9.744208] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 9.745167] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 9.745438] sd 1:0:0:0: [sdb] Write Protect is off [ 9.745440] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.745445] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9.745608] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.748736] scsi 5:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6P5D PQ: 0 ANSI: 5 [ 9.749560] scsi 5:0:0:0: Attached scsi generic sg2 type 5 [ 9.783650] sdb: sdb1 sdb2 [ 9.784655] sd 1:0:0:0: [sdb] Attached SCSI disk [ 9.827414] igb 0000:01:00.1: irq 129 for MSI/MSI-X [ 9.832562] igb 0000:01:00.1: irq 130 for MSI/MSI-X [ 9.837716] igb 0000:01:00.1: irq 131 for MSI/MSI-X [ 9.842866] igb 0000:01:00.1: irq 132 for MSI/MSI-X [ 9.848018] igb 0000:01:00.1: irq 133 for MSI/MSI-X [ 9.853170] igb 0000:01:00.1: irq 134 for MSI/MSI-X [ 9.858322] igb 0000:01:00.1: irq 135 for MSI/MSI-X [ 9.863474] igb 0000:01:00.1: irq 136 for MSI/MSI-X [ 9.868632] igb 0000:01:00.1: irq 137 for MSI/MSI-X [ 9.873829] igb 0000:01:00.1: irq 129 for MSI/MSI-X [ 9.878980] igb 0000:01:00.1: irq 130 for MSI/MSI-X [ 9.884129] igb 0000:01:00.1: irq 131 for MSI/MSI-X [ 9.889280] igb 0000:01:00.1: irq 132 for MSI/MSI-X [ 9.894431] igb 0000:01:00.1: irq 133 for MSI/MSI-X [ 9.899582] igb 0000:01:00.1: irq 134 for MSI/MSI-X [ 9.904734] igb 0000:01:00.1: irq 135 for MSI/MSI-X [ 9.909887] igb 0000:01:00.1: irq 136 for MSI/MSI-X [ 9.915041] igb 0000:01:00.1: irq 137 for MSI/MSI-X [ 10.111250] igb 0000:01:00.1: added PHC on eth2 [ 10.116056] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 10.123247] igb 0000:01:00.1: eth2: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:27 [ 10.130705] igb 0000:01:00.1: eth2: PBA No: Unknown [ 10.135897] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 10.144100] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k [ 10.152343] ixgbe: Copyright (c) 1999-2013 Intel Corporation. [ 10.158453] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 10.165905] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 10.172099] sky2: driver version 1.30 [ 10.176777] usbcore: registered new interface driver catc [ 10.182494] usbcore: registered new interface driver kaweth [ 10.188338] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 10.196249] usbcore: registered new interface driver pegasus [ 10.202286] usbcore: registered new interface driver rtl8150 [ 10.208334] usbcore: registered new interface driver asix [ 10.214110] usbcore: registered new interface driver ax88179_178a [ 10.220740] usbcore: registered new interface driver cdc_ether [ 10.227115] usbcore: registered new interface driver r815x [ 10.233100] usbcore: registered new interface driver cdc_eem [ 10.239132] usbcore: registered new interface driver dm9601 [ 10.245145] usbcore: registered new interface driver smsc75xx [ 10.251267] usbcore: registered new interface driver smsc95xx [ 10.257420] usbcore: registered new interface driver gl620a [ 10.263359] usbcore: registered new interface driver net1080 [ 10.269422] usbcore: registered new interface driver plusb [ 10.275280] usbcore: registered new interface driver rndis_host [ 10.281480] Switched to clocksource tsc [ 10.281536] usbcore: registered new interface driver cdc_subset [ 10.281767] usbcore: registered new interface driver zaurus [ 10.282031] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 10.282287] usbcore: registered new interface driver int51x1 [ 10.282550] usbcore: registered new interface driver ipheth [ 10.282637] usbcore: registered new interface driver sierra_net [ 10.282686] usbcore: registered new interface driver cdc_ncm [ 10.282687] Fusion MPT base driver 3.04.20 [ 10.282687] Copyright (c) 1999-2008 LSI Corporation [ 10.282696] Fusion MPT SPI Host driver 3.04.20 [ 10.282825] Fusion MPT FC Host driver 3.04.20 [ 10.282975] Fusion MPT SAS Host driver 3.04.20 [ 10.283296] mptbase: ioc0: Initiating bringup [ 10.985456] ioc0: LSISAS1068E B2: Capabilities={Initiator} [ 30.497517] scsi6 : ioc0: LSISAS1068E B2, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16 [ 30.538180] mptsas: ioc0: add expander: num_phys 25, sas_addr (0x5000155d25e3423f) [ 30.642389] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 36, phy 0, sas_addr 0x5000155d25e34200 [ 30.656922] scsi 6:0:0:0: Direct-Access ATA ST31000528AS CC35 PQ: 0 ANSI: 5 [ 30.667896] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 30.667928] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 30.683049] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 28, phy 1, sas_addr 0x5000c500022c41a5 [ 30.695027] scsi 6:0:1:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 30.706775] sd 6:0:1:0: Attached scsi generic sg4 type 0 [ 30.728279] sd 6:0:0:0: [sdc] Write Protect is off [ 30.733355] sd 6:0:0:0: [sdc] Mode Sense: 73 00 00 08 [ 30.733388] sd 6:0:1:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 30.746733] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 32, phy 2, sas_addr 0x5000c50013005f59 [ 30.748225] sd 6:0:1:0: [sdd] Write Protect is off [ 30.748228] sd 6:0:1:0: [sdd] Mode Sense: b3 00 10 08 [ 30.749011] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.749933] sd 6:0:1:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 30.794637] scsi 6:0:2:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 30.806563] sd 6:0:2:0: Attached scsi generic sg5 type 0 [ 30.806588] sd 6:0:2:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 30.822072] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 30, phy 3, sas_addr 0x5000c500130fe681 [ 30.822117] sd 6:0:2:0: [sde] Write Protect is off [ 30.822121] sd 6:0:2:0: [sde] Mode Sense: b3 00 10 08 [ 30.842690] sdd: sdd1 sdd2 [ 30.843473] sd 6:0:2:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 30.865176] scsi 6:0:3:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 30.889537] sd 6:0:3:0: Attached scsi generic sg6 type 0 [ 30.889683] sd 6:0:3:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 30.891465] sd 6:0:3:0: [sdf] Write Protect is off [ 30.891468] sd 6:0:3:0: [sdf] Mode Sense: b3 00 10 08 [ 30.891926] sd 6:0:1:0: [sdd] Attached SCSI disk [ 30.892947] sd 6:0:3:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 30.914598] sde: sde1 sde2 [ 30.914619] random: nonblocking pool is initialized [ 30.914643] sdc: sdc1 sdc2 sdc3 [ 30.920303] sd 6:0:2:0: [sde] Attached SCSI disk [ 30.929448] sdf: sdf1 sdf2 [ 30.935248] sd 6:0:3:0: [sdf] Attached SCSI disk [ 30.953894] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 15, phy 4, sas_addr 0x5000c500022d25dd [ 30.965876] scsi 6:0:4:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 30.976816] sd 6:0:0:0: [sdc] Attached SCSI disk [ 30.978156] sd 6:0:4:0: Attached scsi generic sg7 type 0 [ 30.999836] sd 6:0:4:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 31.000462] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 14, phy 5, sas_addr 0x5000c500022d09b5 [ 31.002289] scsi 6:0:5:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 31.005759] sd 6:0:5:0: Attached scsi generic sg8 type 0 [ 31.027663] sd 6:0:5:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 31.028287] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 19, phy 6, sas_addr 0x5000c500022c3f65 [ 31.030071] scsi 6:0:6:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 31.030213] sd 6:0:5:0: [sdh] Write Protect is off [ 31.030215] sd 6:0:5:0: [sdh] Mode Sense: b3 00 10 08 [ 31.033033] sd 6:0:5:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 31.033312] sd 6:0:6:0: Attached scsi generic sg9 type 0 [ 31.076153] sd 6:0:6:0: [sdi] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 31.076789] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 17, phy 7, sas_addr 0x5000c500022d2a0d [ 31.098734] scsi 6:0:7:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 31.099623] sd 6:0:6:0: [sdi] Write Protect is off [ 31.099625] sd 6:0:6:0: [sdi] Mode Sense: b3 00 10 08 [ 31.101762] sd 6:0:6:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 31.101915] sd 6:0:7:0: Attached scsi generic sg10 type 0 [ 31.144371] sd 6:0:7:0: [sdj] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 31.145578] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 16, phy 8, sas_addr 0x5000c500022d0f35 [ 31.167368] sd 6:0:4:0: [sdg] Write Protect is off [ 31.167389] sdh: sdh1 sdh2 [ 31.175545] sd 6:0:4:0: [sdg] Mode Sense: b3 00 10 08 [ 31.175575] scsi 6:0:8:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 31.197105] sd 6:0:7:0: [sdj] Write Protect is off [ 31.198370] sd 6:0:4:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 31.199263] sd 6:0:8:0: Attached scsi generic sg11 type 0 [ 31.223366] sd 6:0:7:0: [sdj] Mode Sense: b3 00 10 08 [ 31.240068] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 33, phy 9, sas_addr 0x5000c500130e21cd [ 31.250726] sd 6:0:8:0: [sdk] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 31.258797] sd 6:0:7:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 31.301634] scsi 6:0:9:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 31.302040] sd 6:0:5:0: [sdh] Attached SCSI disk [ 31.302624] sd 6:0:8:0: [sdk] Write Protect is off [ 31.302627] sd 6:0:8:0: [sdk] Mode Sense: b3 00 10 08 [ 31.323997] sdi: sdi1 sdi2 [ 31.324620] sd 6:0:8:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 31.348621] sd 6:0:9:0: Attached scsi generic sg12 type 0 [ 31.369800] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 31, phy 10, sas_addr 0x5000c500130f4f4d [ 31.391029] sd 6:0:9:0: [sdl] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 31.391035] sdg: sdg1 sdg2 [ 31.414231] sdj: sdj1 sdj2 [ 31.414738] scsi 6:0:10:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 31.415565] sd 6:0:9:0: [sdl] Write Protect is off [ 31.415567] sd 6:0:9:0: [sdl] Mode Sense: b3 00 10 08 [ 31.415593] sd 6:0:6:0: [sdi] Attached SCSI disk [ 31.417698] sd 6:0:9:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 31.418112] sd 6:0:10:0: Attached scsi generic sg13 type 0 [ 31.439399] sd 6:0:10:0: [sdm] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 31.439404] sdk: sdk1 sdk2 [ 31.439946] sd 6:0:4:0: [sdg] Attached SCSI disk [ 31.440582] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 35, phy 11, sas_addr 0x5000c50017cc2595 [ 31.462737] sd 6:0:10:0: [sdm] Write Protect is off [ 31.462739] sd 6:0:10:0: [sdm] Mode Sense: b3 00 10 08 [ 31.463027] scsi 6:0:11:0: Direct-Access SEAGATE ST3300657SS 0006 PQ: 0 ANSI: 5 [ 31.464339] sd 6:0:10:0: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 31.466033] sd 6:0:11:0: Attached scsi generic sg14 type 0 [ 31.487152] sd 6:0:11:0: [sdn] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 31.487782] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 34, phy 24, sas_addr 0x5000155d25e3423e [ 31.489196] sd 6:0:8:0: [sdk] Attached SCSI disk [ 31.489218] sd 6:0:11:0: [sdn] Write Protect is off [ 31.489220] sd 6:0:11:0: [sdn] Mode Sense: bb 00 10 08 [ 31.490653] sd 6:0:11:0: [sdn] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 31.491760] scsi 6:0:12:0: Enclosure PROMISE 2U-SAS-12-S BP 0301 PQ: 0 ANSI: 5 [ 31.513841] sdl: sdl1 sdl2 [ 31.515812] scsi 6:0:12:0: Attached scsi generic sg15 type 13 [ 31.517203] sdm: sdm1 sdm2 [ 31.519260] Fusion MPT misc device (ioctl) driver 3.04.20 [ 31.519446] mptctl: Registered with Fusion MPT base driver [ 31.519448] mptctl: /dev/mptctl @ (major,minor=10,220) [ 31.519894] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 31.519898] ehci-pci: EHCI PCI platform driver [ 31.520062] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 31.520222] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 31.520241] ehci-pci 0000:00:1a.7: debug port 1 [ 31.520390] sd 6:0:9:0: [sdl] Attached SCSI disk [ 31.523258] sd 6:0:10:0: [sdm] Attached SCSI disk [ 31.523538] sdn: sdn1 sdn2 [ 31.524148] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 31.524164] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbe23000 [ 31.528697] sd 6:0:11:0: [sdn] Attached SCSI disk [ 31.534246] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 31.534703] hub 1-0:1.0: USB hub found [ 31.534713] hub 1-0:1.0: 6 ports detected [ 31.535013] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 31.535144] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 31.535161] ehci-pci 0000:00:1d.7: debug port 1 [ 31.539081] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 31.539095] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbe22000 [ 31.550220] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 31.550876] hub 2-0:1.0: USB hub found [ 31.550886] hub 2-0:1.0: 6 ports detected [ 31.551270] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 31.551274] ohci-pci: OHCI PCI platform driver [ 31.551540] uhci_hcd: USB Universal Host Controller Interface driver [ 31.551682] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 31.552007] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 31.552015] uhci_hcd 0000:00:1a.0: detected 2 ports [ 31.552039] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 31.552606] hub 3-0:1.0: USB hub found [ 31.552615] hub 3-0:1.0: 2 ports detected [ 31.552838] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 31.553043] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 31.553050] uhci_hcd 0000:00:1a.2: detected 2 ports [ 31.553081] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0 [ 31.553551] hub 4-0:1.0: USB hub found [ 31.553560] hub 4-0:1.0: 2 ports detected [ 31.553778] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 31.553966] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 31.553973] uhci_hcd 0000:00:1d.0: detected 2 ports [ 31.553994] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 31.554518] hub 5-0:1.0: USB hub found [ 31.554526] hub 5-0:1.0: 2 ports detected [ 31.554745] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 31.554926] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 31.554933] uhci_hcd 0000:00:1d.1: detected 2 ports [ 31.554954] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 31.555381] hub 6-0:1.0: USB hub found [ 31.555390] hub 6-0:1.0: 2 ports detected [ 31.555613] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 31.555803] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 31.555810] uhci_hcd 0000:00:1d.2: detected 2 ports [ 31.555830] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 31.556251] hub 7-0:1.0: USB hub found [ 31.556259] hub 7-0:1.0: 2 ports detected [ 31.556684] usbcore: registered new interface driver usb-storage [ 31.556841] usbcore: registered new interface driver ums-alauda [ 31.557006] usbcore: registered new interface driver ums-datafab [ 31.557169] usbcore: registered new interface driver ums-freecom [ 31.557268] usbcore: registered new interface driver ums-isd200 [ 31.557367] usbcore: registered new interface driver ums-jumpshot [ 31.557464] usbcore: registered new interface driver ums-sddr09 [ 31.557563] usbcore: registered new interface driver ums-sddr55 [ 31.557661] usbcore: registered new interface driver ums-usbat [ 31.557770] usbcore: registered new interface driver usbtest [ 31.557852] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 31.560128] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 31.560140] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 31.560719] mousedev: PS/2 mouse device common for all mice [ 31.561443] rtc_cmos 00:07: RTC can wake from S4 [ 31.561624] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 31.561653] rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 31.561796] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 31.561819] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460) [ 31.561975] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 31.562006] iTCO_vendor_support: vendor-support=0 [ 31.562060] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 31.562062] md: linear personality registered for level -1 [ 31.562062] md: raid0 personality registered for level 0 [ 31.562063] md: raid1 personality registered for level 1 [ 31.562064] md: raid10 personality registered for level 10 [ 31.562263] md: raid6 personality registered for level 6 [ 31.562264] md: raid5 personality registered for level 5 [ 31.562264] md: raid4 personality registered for level 4 [ 31.562265] md: multipath personality registered for level -4 [ 31.562266] md: faulty personality registered for level -5 [ 31.563453] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 31.564294] device-mapper: multipath: version 1.6.0 loaded [ 31.564295] device-mapper: multipath round-robin: version 1.0.0 loaded [ 31.564311] device-mapper: cache-policy-mq: version 1.2.0 loaded [ 31.564312] device-mapper: cache cleaner: version 1.0.0 loaded [ 31.564530] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 31.565469] usbcore: registered new interface driver usbhid [ 31.565470] usbhid: USB HID core driver [ 31.565614] TCP: bic registered [ 31.565615] Initializing XFRM netlink socket [ 31.565861] NET: Registered protocol family 10 [ 31.566140] sit: IPv6 over IPv4 tunneling driver [ 31.566366] NET: Registered protocol family 17 [ 31.566383] 8021q: 802.1Q VLAN Support v1.8 [ 31.566690] sctp: Hash tables configured (established 65536 bind 65536) [ 31.566865] Key type dns_resolver registered [ 31.568587] [ 31.568587] printing PIC contents [ 31.568590] ... PIC IMR: ffff [ 31.568593] ... PIC IRR: 0c20 [ 31.568602] ... PIC ISR: 0000 [ 31.568605] ... PIC ELCR: 0e20 [ 31.568638] printing local APIC contents on CPU#0/32: [ 31.568639] ... APIC ID: 20000000 (20) [ 31.568639] ... APIC VERSION: 01060015 [ 31.568640] ... APIC TASKPRI: 00000000 (00) [ 31.568640] ... APIC PROCPRI: 00000000 [ 31.568641] ... APIC LDR: 01000000 [ 31.568641] ... APIC DFR: ffffffff [ 31.568641] ... APIC SPIV: 000001ff [ 31.568642] ... APIC ISR field: [ 31.568644] 0000000000000000000000000000000000000000000000000000000000000000 [ 31.568645] ... APIC TMR field: [ 31.568647] 0000000000000000000000020002000000000000000000000000000000000000 [ 31.568647] ... APIC IRR field: [ 31.568649] 0000000000000000000000000000000000000000000000000000000000000000 [ 31.568649] ... APIC ESR: 00000000 [ 31.568649] ... APIC ICR: 000000fd [ 31.568650] ... APIC ICR2: 04000000 [ 31.568650] ... APIC LVTT: 000000ef [ 31.568651] ... APIC LVTPC: 00000400 [ 31.568651] ... APIC LVT0: 00010700 [ 31.568651] ... APIC LVT1: 00000400 [ 31.568652] ... APIC LVTERR: 000000fe [ 31.568652] ... APIC TMICT: 000259a7 [ 31.568652] ... APIC TMCCT: 0001b9c7 [ 31.568653] ... APIC TDCR: 00000003 [ 31.568653] [ 31.568654] number of MP IRQ sources: 15. [ 31.568655] number of IO-APIC #0 registers: 24. [ 31.568655] number of IO-APIC #2 registers: 24. [ 31.568656] number of IO-APIC #3 registers: 24. [ 31.568656] number of IO-APIC #4 registers: 24. [ 31.568657] testing the IO APIC....................... [ 31.568663] IO APIC #0...... [ 31.568664] .... register #00: 00000000 [ 31.568664] ....... : physical APIC id: 00 [ 31.568664] ....... : Delivery Type: 0 [ 31.568665] ....... : LTS : 0 [ 31.568665] .... register #01: 00170020 [ 31.568666] ....... : max redirection entries: 17 [ 31.568666] ....... : PRQ implemented: 0 [ 31.568666] ....... : IO APIC version: 20 [ 31.568667] .... IRQ redirection table: [ 31.568671] 1 0 0 0 0 0 0 00 [ 31.568675] 0 0 0 0 0 0 0 C5 [ 31.568679] 0 0 0 0 0 0 0 30 [ 31.568682] 0 0 0 0 0 0 0 33 [ 31.568687] 0 0 0 0 0 0 0 34 [ 31.568691] 0 0 0 0 0 0 0 35 [ 31.568695] 0 0 0 0 0 0 0 36 [ 31.568699] 0 0 0 0 0 0 0 37 [ 31.568703] 0 0 0 0 0 0 0 D5 [ 31.568707] 0 1 0 0 0 0 0 31 [ 31.568710] 0 0 0 0 0 0 0 3A [ 31.568715] 0 0 0 0 0 0 0 3B [ 31.568718] 0 0 0 0 0 0 0 B5 [ 31.568723] 0 0 0 0 0 0 0 3D [ 31.568727] 0 0 0 0 0 0 0 3E [ 31.568731] 0 0 0 0 0 0 0 3F [ 31.568734] 0 1 0 1 0 0 0 41 [ 31.568739] 1 1 0 1 0 0 0 62 [ 31.568742] 0 1 0 1 0 0 0 61 [ 31.568747] 0 1 0 1 0 0 0 51 [ 31.568751] 1 0 0 0 0 0 0 00 [ 31.568755] 1 0 0 0 0 0 2 F2 [ 31.568759] 1 0 0 0 0 0 0 00 [ 31.568763] 0 1 0 1 0 0 0 71 [ 31.568766] IO APIC #2...... [ 31.568766] .... register #00: 02000000 [ 31.568766] ....... : physical APIC id: 02 [ 31.568767] ....... : Delivery Type: 0 [ 31.568767] ....... : LTS : 0 [ 31.568768] .... register #01: 00178020 [ 31.568768] ....... : max redirection entries: 17 [ 31.568768] ....... : PRQ implemented: 1 [ 31.568769] ....... : IO APIC version: 20 [ 31.568769] .... register #02: 02000000 [ 31.568769] ....... : arbitration: 02 [ 31.568770] .... register #03: 00000001 [ 31.568770] ....... : Boot DT : 1 [ 31.568770] .... IRQ redirection table: [ 31.568772] 1 0 0 0 0 0 0 00 [ 31.568775] 1 0 0 0 0 0 0 00 [ 31.568777] 1 0 0 0 0 0 0 00 [ 31.568779] 1 0 0 0 0 0 0 00 [ 31.568781] 1 0 0 0 0 0 0 00 [ 31.568783] 1 0 0 0 0 0 0 00 [ 31.568785] 1 0 0 0 0 0 0 00 [ 31.568787] 1 0 0 0 0 0 0 00 [ 31.568789] 1 0 0 0 0 0 0 00 [ 31.568791] 1 0 0 0 0 0 0 00 [ 31.568793] 1 0 0 0 0 0 0 00 [ 31.568795] 1 0 0 0 0 0 0 00 [ 31.568797] 1 0 0 0 0 0 0 00 [ 31.568799] 1 0 0 0 0 0 0 00 [ 31.568801] 1 0 0 0 0 0 0 00 [ 31.568803] 1 0 0 0 0 0 0 00 [ 31.568805] 1 0 0 0 0 0 0 00 [ 31.568807] 1 0 0 0 0 0 0 00 [ 31.568809] 1 0 0 0 0 0 0 00 [ 31.568811] 1 0 0 0 0 0 0 00 [ 31.568813] 1 0 0 0 0 0 0 00 [ 31.568815] 1 0 0 0 0 0 0 00 [ 31.568817] 1 0 0 0 0 0 0 00 [ 31.568819] 1 0 0 0 0 0 0 00 [ 31.568822] IO APIC #3...... [ 31.568822] .... register #00: 03000000 [ 31.568822] ....... : physical APIC id: 03 [ 31.568823] ....... : Delivery Type: 0 [ 31.568823] ....... : LTS : 0 [ 31.568824] .... register #01: 00178020 [ 31.568824] ....... : max redirection entries: 17 [ 31.568824] ....... : PRQ implemented: 1 [ 31.568825] ....... : IO APIC version: 20 [ 31.568825] .... register #02: 03000000 [ 31.568825] ....... : arbitration: 03 [ 31.568826] .... register #03: 00000001 [ 31.568826] ....... : Boot DT : 1 [ 31.568826] .... IRQ redirection table: [ 31.568828] 1 0 0 0 0 0 0 00 [ 31.568830] 1 0 0 0 0 0 0 00 [ 31.568832] 1 0 0 0 0 0 0 00 [ 31.568834] 1 0 0 0 0 0 0 00 [ 31.568836] 1 0 0 0 0 0 0 00 [ 31.568838] 1 0 0 0 0 0 0 00 [ 31.568840] 1 0 0 0 0 0 0 00 [ 31.568843] 1 0 0 0 0 0 0 00 [ 31.568845] 1 0 0 0 0 0 0 00 [ 31.568847] 1 0 0 0 0 0 0 00 [ 31.568849] 1 0 0 0 0 0 0 00 [ 31.568851] 1 0 0 0 0 0 0 00 [ 31.568853] 1 0 0 0 0 0 0 00 [ 31.568855] 1 0 0 0 0 0 0 00 [ 31.568857] 1 0 0 0 0 0 0 00 [ 31.568859] 1 0 0 0 0 0 0 00 [ 31.568861] 1 0 0 0 0 0 0 00 [ 31.568863] 1 0 0 0 0 0 0 00 [ 31.568865] 1 0 0 0 0 0 0 00 [ 31.568867] 1 0 0 0 0 0 0 00 [ 31.568869] 1 0 0 0 0 0 0 00 [ 31.568871] 1 0 0 0 0 0 0 00 [ 31.568873] 1 0 0 0 0 0 0 00 [ 31.568875] 1 0 0 0 0 0 0 00 [ 31.568878] IO APIC #4...... [ 31.568879] .... register #00: 04000000 [ 31.568879] ....... : physical APIC id: 04 [ 31.568879] ....... : Delivery Type: 0 [ 31.568880] ....... : LTS : 0 [ 31.568880] .... register #01: 00170020 [ 31.568880] ....... : max redirection entries: 17 [ 31.568881] ....... : PRQ implemented: 0 [ 31.568881] ....... : IO APIC version: 20 [ 31.568881] .... register #02: 00000000 [ 31.568882] ....... : arbitration: 00 [ 31.568882] .... register #03: 00000001 [ 31.568883] ....... : Boot DT : 1 [ 31.568883] .... IRQ redirection table: [ 31.568885] 1 1 0 1 0 0 0 A1 [ 31.568888] 1 0 0 0 0 0 0 00 [ 31.568890] 1 1 0 1 0 0 0 C1 [ 31.568892] 1 0 0 0 0 0 0 00 [ 31.568895] 1 1 0 1 0 0 0 81 [ 31.568897] 1 0 0 0 0 0 0 00 [ 31.568900] 1 1 0 1 0 0 0 E1 [ 31.568902] 1 0 0 0 0 0 0 00 [ 31.568904] 1 1 0 1 0 0 0 42 [ 31.568907] 1 0 0 0 0 0 0 00 [ 31.568909] 1 0 0 0 0 0 0 00 [ 31.568912] 1 0 0 0 0 0 0 00 [ 31.568914] 1 0 0 0 0 0 0 00 [ 31.568917] 1 0 0 0 0 0 0 00 [ 31.568919] 1 0 0 0 0 0 0 00 [ 31.568921] 1 0 0 0 0 0 0 00 [ 31.568924] 1 1 0 1 0 0 0 44 [ 31.568926] 1 0 0 0 0 0 0 00 [ 31.568929] 1 0 0 0 0 0 0 00 [ 31.568931] 1 0 0 0 0 0 0 00 [ 31.568933] 1 0 0 0 0 0 0 00 [ 31.568936] 1 0 0 0 0 0 0 00 [ 31.568938] 1 0 0 0 0 0 0 00 [ 31.568941] 1 0 0 0 0 0 0 00 [ 31.568941] IRQ to pin mappings: [ 31.568942] IRQ0 -> 0:2 [ 31.568943] IRQ1 -> 0:1 [ 31.568944] IRQ3 -> 0:3 [ 31.568945] IRQ4 -> 0:4 [ 31.568946] IRQ5 -> 0:5 [ 31.568947] IRQ6 -> 0:6 [ 31.568948] IRQ7 -> 0:7 [ 31.568948] IRQ8 -> 0:8 [ 31.568949] IRQ9 -> 0:9 [ 31.568950] IRQ10 -> 0:10 [ 31.568951] IRQ11 -> 0:11 [ 31.568952] IRQ12 -> 0:12 [ 31.568953] IRQ13 -> 0:13 [ 31.568953] IRQ14 -> 0:14 [ 31.568954] IRQ15 -> 0:15 [ 31.568955] IRQ16 -> 0:16 [ 31.568956] IRQ17 -> 0:17 [ 31.568957] IRQ18 -> 0:18 [ 31.568958] IRQ19 -> 0:19 [ 31.568958] IRQ23 -> 0:23 [ 31.568960] IRQ72 -> 3:0 [ 31.568961] IRQ74 -> 3:2 [ 31.568961] IRQ76 -> 3:4 [ 31.568963] IRQ78 -> 3:6 [ 31.568963] IRQ80 -> 3:8 [ 31.568965] IRQ88 -> 3:16 [ 31.568967] .................................... done. [ 31.569131] registered taskstats version 1 [ 32.250895] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 32.403033] hub 5-2:1.0: USB hub found [ 32.404774] hub 5-2:1.0: 4 ports detected [ 32.685005] usb 5-2.1: new low-speed USB device number 3 using uhci_hcd [ 32.908828] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2.1/5-2.1:1.0/0003:0557:2261.0001/input/input4 [ 32.910862] hid-generic 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-2.1/input0 [ 32.947464] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2.1/5-2.1:1.1/0003:0557:2261.0002/input/input5 [ 32.947783] hid-generic 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-2.1/input1 [ 32.969745] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2.1/5-2.1:1.2/0003:0557:2261.0003/input/input6 [ 32.970309] hid-generic 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-2.1/input2 [ 33.227324] rtc_cmos 00:07: setting system clock to 2013-12-28 14:13:34 UTC (1388240014) [ 33.235916] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 33.242200] EDD information not available. [ 33.255037] sd 6:0:7:0: [sdj] Attached SCSI disk [ 33.275740] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.392119] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 33.398219] 8021q: adding VLAN 0 to HW filter on device eth1 [ 33.516236] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 33.522341] 8021q: adding VLAN 0 to HW filter on device eth2 [ 41.695010] igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 41.702827] igb 0000:01:00.0 eth1: Link Speed was downgraded by SmartSpeed [ 41.711246] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 41.726578] Sending DHCP requests ., OK [ 42.359096] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.67 [ 42.551778] IP-Config: Complete: [ 42.555359] device=eth1, hwaddr=00:30:48:cf:17:26, ipaddr=192.168.1.67, mask=255.255.255.0, gw=192.168.1.1 [ 42.565974] host=lkp-ws02, domain=lkp.intel.com, nis-domain=(none) [ 42.572891] bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath= [ 42.579689] nameserver0=192.168.1.1 [ 42.584435] PM: Hibernation image not present or could not be loaded. [ 42.595200] Freeing unused kernel memory: 1436K (ffffffff82338000 - ffffffff8249f000) [ 42.603521] Write protecting the kernel read-only data: 18432k [ 42.618196] Freeing unused kernel memory: 1848K (ffff880001a32000 - ffff880001c00000) [ 42.632331] Freeing unused kernel memory: 1996K (ffff88000200d000 - ffff880002200000) [ 42.858788] ipmi message handler version 39.2 [ 42.864819] IPMI System Interface driver. [ 42.869195] ipmi_si: probing via SMBIOS [ 42.873269] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 42.873273] ipmi_si: Adding SMBIOS-specified kcs state machine [ 42.873275] ipmi_si: probing via SPMI [ 42.873276] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 42.873278] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 42.873279] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 42.873286] ipmi_si: Interface detection failed [ 42.920414] microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926481] microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926563] microcode: CPU2 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926653] microcode: CPU3 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926668] microcode: CPU4 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926713] microcode: CPU5 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926786] microcode: CPU6 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926829] microcode: CPU7 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926845] microcode: CPU8 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926864] microcode: CPU9 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926903] microcode: CPU10 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926931] microcode: CPU11 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926945] microcode: CPU12 sig=0x206c1, pf=0x1, revision=0x3 [ 42.926979] microcode: CPU13 sig=0x206c1, pf=0x1, revision=0x3 [ 42.927032] microcode: CPU14 sig=0x206c1, pf=0x1, revision=0x3 [ 42.927084] microcode: CPU15 sig=0x206c1, pf=0x1, revision=0x3 [ 42.927124] microcode: CPU16 sig=0x206c1, pf=0x1, revision=0x3 [ 42.927197] microcode: CPU17 sig=0x206c1, pf=0x1, revision=0x3 [ 42.927212] microcode: CPU18 sig=0x206c1, pf=0x1, revision=0x3 [ 42.927227] microcode: CPU19 sig=0x206c1, pf=0x1, revision=0x3 [ 42.927238] microcode: CPU20 sig=0x206c1, pf=0x1, revision=0x3 [ 42.932494] microcode: CPU21 sig=0x206c1, pf=0x1, revision=0x3 [ 42.932540] microcode: CPU22 sig=0x206c1, pf=0x1, revision=0x3 [ 42.932582] microcode: CPU23 sig=0x206c1, pf=0x1, revision=0x3 [ 42.932682] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 43.083565] btrfs: device fsid f3082e2d-7b16-4b16-8027-d9ef0ff805ff devid 1 transid 44 /dev/sdc1 ==> /tmp/run_log <== Kernel tests: Boot OK! PATH=/sbin:/usr/sbin:/bin:/usr/bin ==> /tmp/err_log <== ==> /tmp/run_log <== downloading latest lkp src code Kernel tests: Boot OK 2! /lkp/lkp/src/bin/run-lkp LKP_SRC_DIR=/lkp/lkp/src RESULT_ROOT=/lkp/result/lkp-ws02/micro/dd-write/11HDD-RAID5-cfq-btrfs-1dd/x86_64-lkp/1ba337ca6cd05ea33029692dc837a43c05108cb7/1 job=/lkp/scheduled/lkp-ws02/reconfirm_dd-write-11HDD-RAID5-cfq-btrfs-1dd-x86_64-lkp-1ba337ca6cd05ea33029692dc837a43c05108cb7-0.yaml Stopping watchdog daemon...2013-12-28 14:13:55 mount -t debugfs none /sys/kernel/debug run-job /lkp/scheduled/lkp-ws02/reconfirm_dd-write-11HDD-RAID5-cfq-btrfs-1dd-x86_64-lkp-1ba337ca6cd05ea33029692dc837a43c05108cb7-0.yaml run: /lkp/lkp/src/setup/disk{"nr_hdd"=>"11"} run: /lkp/lkp/src/setup/md{"raid_level"=>"raid5"} run: /lkp/lkp/src/monitors/event/wait pre-test{} run: /lkp/lkp/src/monitors/wrapper perf-stat{} run: /lkp/lkp/src/monitors/wrapper ftrace{"events"=>"balance_dirty_pages bdi_dirty_ratelimit global_dirty_state writeback_single_inode"} 2013-12-28 14:13:55 mdadm -q --create /dev/md0 --chunk=256 --level=raid5 --raid-devices=11 --force --assume-clean /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 /dev/sdh1 /dev/sdi1 /dev/sdj1 /dev/sdk1 /dev/sdl1 /dev/sdm1 /dev/sdn1 [ 53.172496] md: bind [ 53.175767] md: bind [ 53.179044] md: bind [ 53.182331] md: bind [ 53.185584] md: bind [ 53.188815] md: bind [ 53.192058] md: bind [ 53.195299] md: bind [ 53.198558] md: bind [ 53.201810] md: bind [ 53.205032] md: bind [ 53.209619] md/raid:md0: device sdn1 operational as raid disk 10 [ 53.215910] md/raid:md0: device sdm1 operational as raid disk 9 [ 53.222108] md/raid:md0: device sdl1 operational as raid disk 8 [ 53.228301] md/raid:md0: device sdk1 operational as raid disk 7 [ 53.234502] md/raid:md0: device sdj1 operational as raid disk 6 [ 53.240703] md/raid:md0: device sdi1 operational as raid disk 5 [ 53.246896] md/raid:md0: device sdh1 operational as raid disk 4 [ 53.253090] md/raid:md0: device sdg1 operational as raid disk 3 [ 53.259289] md/raid:md0: device sdf1 operational as raid disk 2 [ 53.265483] md/raid:md0: device sde1 operational as raid disk 1 [ 53.271676] md/raid:md0: device sdd1 operational as raid disk 0 [ 53.278512] md/raid:md0: allocated 0kB [ 53.282669] md/raid:md0: raid level 5 active with 11 out of 11 devices, algorithm 2 [ 53.297275] RAID conf printout: [ 53.300691] --- level:5 rd:11 wd:11 [ 53.304542] disk 0, o:1, dev:sdd1 [ 53.308218] disk 1, o:1, dev:sde1 [ 53.311894] disk 2, o:1, dev:sdf1 [ 53.315575] disk 3, o:1, dev:sdg1 [ 53.319252] disk 4, o:1, dev:sdh1 [ 53.322931] disk 5, o:1, dev:sdi1 [ 53.326606] disk 6, o:1, dev:sdj1 [ 53.330285] disk 7, o:1, dev:sdk1 [ 53.333962] disk 8, o:1, dev:sdl1 [ 53.337633] disk 9, o:1, dev:sdm1 [ 53.341311] disk 10, o:1, dev:sdn1 [ 53.345108] md0: detected capacity change from 0 to 1998633041920 run: /lkp/lkp/src/setup/iosched{"scheduler"=>"cfq"} run: /lkp/lkp/src/setup/fs{"fs" [ 53.362164] md0: unknown partition table =>"btrfs"} 2013-12-28 14:13:55 mkfs -t btrfs /dev/md0 [ 53.509189] btrfs: device fsid 86e02182-98a1-4732-9bef-d2e4e513b1a2 devid 1 transid 4 /dev/md0 WARNING! - Btrfs v0.20-rc1-566-gd1570a0 IS EXPERIMENTAL WARNING! - see http://btrfs.wiki.kern [ 53.545889] btrfs: device fsid 86e02182-98a1-4732-9bef-d2e4e513b1a2 el.org before usdevid 1 transid 4 /dev/md0 ing fs create [ 53.558326] btrfs: disk space caching is enabled d label (null) on /dev/md0 nodesize 4096 leafs [ 53.566685] btrfs: creating UUID tree ize 4096 sectorsize 4096 size 1.82TiB Btrfs v0.20-rc1-566-gd1570a0 2013-12-28 14:13:56 mount -t btrfs /dev/md0 /fs/md0 run: pre-test run: /lkp/lkp/src/monitors/wrapper uptime{} run: /lkp/lkp/src/monitors/wrapper iostat{} run: /lkp/lkp/src/monitors/wrapper vmstat{} [ 53.648946] btrfs: device fsid 86e02182-98a1-4732-9bef-d2e4e513b1a2 run: /lkp/lkp/src/monitors/wrappdevid 1 transid 5 /dev/md0 er numa-numastat{} run: /lkp/lkp/src/monitors/wrapper numa-vmstat{} run: /lkp/lkp/src/monitors/wrapper numa-meminfo{} run: /lkp/lkp/src/monitors/wrapper proc-vmstat{} run: /lkp/lkp/src/monitors/wrapper meminfo{} run: /lkp/lkp/src/monitors/wrapper slabinfo{} run: /lkp/lkp/src/monitors/wrapper buddyinfo{} run: /lkp/lkp/src/monitors/wrapper pagetypeinfo{} run: /lkp/lkp/src/monitors/wrapper interrupts{} run: /lkp/lkp/src/monitors/wrapper lock_stat{} run: /lkp/lkp/src/monitors/wrapper softirqs{} run: /lkp/lkp/src/monitors/wrapper bdi_dev_mapping{} run: /lkp/lkp/src/monitors/wrapper pmeter{} run: /lkp/lkp/src/monitors/wrapper diskstats{} run: /lkp/lkp/src/monitors/wrapper zoneinfo{} run: /usr/bin/time -v -o /tmp/time /lkp/lkp/src/tests/micro/wrapper dd{"nr_dd"=>"1"} . Starting watchdog keepalive daemon.... Stopping watchdog keepalive daemon.... Starting watchdog daemon.... [ 88.690467] ------------[ cut here ]------------ [ 88.695353] kernel BUG at fs/bio.c:1748! [ 88.701623] invalid opcode: 0000 [#1] SMP [ 88.706107] Modules linked in: microcode ipmi_si ipmi_msghandler acpi_cpufreq processor [ 88.714966] CPU: 0 PID: 3956 Comm: md0_raid5 Not tainted 3.13.0-rc5-next-20131224-06549-g1ba337c #2 [ 88.724496] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/06/2010 [ 88.731463] task: ffff880217772180 ti: ffff880217cfa000 task.ti: ffff880217cfa000 [ 88.739423] RIP: 0010:[] [] bio_endio+0x1e/0x6a [ 88.747716] RSP: 0018:ffff880217cfbb68 EFLAGS: 00010246 [ 88.753293] RAX: 0000000000000000 RBX: 00000000fffffffb RCX: 0000000000015d00 [ 88.760692] RDX: ffffea000e75f600 RSI: 0000000000000000 RDI: ffff88039ebebbe8 [ 88.768090] RBP: ffff880217cfbb80 R08: ffffea0008662ac0 R09: ffff880237824a00 [ 88.775490] R10: ffffea000e7afa80 R11: ffffffff8145b12d R12: ffff8802198ab780 [ 88.782897] R13: 0000000000000000 R14: ffff8804169f8000 R15: 0000000000000000 [ 88.790297] FS: 0000000000000000(0000) GS:ffff88043fc00000(0000) knlGS:0000000000000000 [ 88.798866] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 88.804875] CR2: 0000000000ba3d64 CR3: 000000000220c000 CR4: 00000000000007f0 [ 88.812275] Stack: [ 88.814548] ffff88039ebebbe8 ffff88039ebebbe8 ffff8802198ab780 ffff880217cfbba8 [ 88.822673] ffffffff8145b138 00000000fffffffb ffff8804163f6000 ffff88039ebeb0a8 [ 88.830801] ffff880217cfbbd0 ffffffff8120c28b ffff88039ebeb0a8 ffff88039ebeb0a8 [ 88.838928] Call Trace: [ 88.841640] [] btrfs_end_bio+0x116/0x11d [ 88.847474] [] bio_endio+0x63/0x6a [ 88.852793] [] return_io+0x5c/0x97 [ 88.858110] [] handle_stripe+0x1dc6/0x1f49 [ 88.864130] [] ? __perf_sw_event+0x146/0x15a [ 88.870314] [] ? update_curr+0x77/0x116 [ 88.876072] [] handle_active_stripes.isra.24+0x2e0/0x360 [ 88.883304] [] raid5d+0x3e2/0x4f2 [ 88.888538] [] ? schedule_timeout+0x2f/0x1bf [ 88.894729] [] ? _raw_spin_lock_irqsave+0x19/0x56 [ 88.901348] [] md_thread+0x10f/0x125 [ 88.906839] [] ? __wake_up_sync+0x12/0x12 [ 88.912761] [] ? md_register_thread+0xd5/0xd5 [ 88.919035] [] kthread+0xdb/0xe3 [ 88.924176] [] ? kthread_create_on_node+0x16f/0x16f [ 88.930969] [] ret_from_fork+0x7c/0xb0 [ 88.936633] [] ? kthread_create_on_node+0x16f/0x16f [ 88.943430] Code: ff ff eb bb 5b 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89 e5 41 54 53 53 bb fb ff ff ff 48 85 ff 74 4c 8b 47 44 85 c0 7f 02 <0f> 0b 85 f6 74 07 f0 80 67 10 fe eb 09 48 8b 47 10 a8 01 0f 44 [ 88.966917] RIP [] bio_endio+0x1e/0x6a [ 88.972643] RSP [ 88.976579] ---[ end trace c016a3f58dc3f7a0 ]--- [ 88.981555] Kernel panic - not syncing: Fatal exception [ 88.987494] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) [ 88.998144] Rebooting in 10 seconds.. [ 98.980144] ACPI MEMORY or I/O RESET_REG. --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg-fileio Content-Transfer-Encoding: quoted-printable early console in setup code Probing EDD (edd=3Doff to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.13.0-rc6-01897-g2b48961 (kbuild@ant) (gcc ve= rsion 4.8.1 (Debian 4.8.1-8) ) #1 SMP Wed Jan 1 01:27:51 CST 2014 [ 0.000000] Command line: user=3Dlkp job=3D/lkp/scheduled/kbuildx-1/cycl= ic_fileio-600s-100%-1HDD-btrfs-64G-1024-rndrw-sync-HEAD.yaml ARCH=3Dx86_64 = BOOT_IMAGE=3D/kernel/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/vm= linuz-3.13.0-rc6-01897-g2b48961 kconfig=3Dx86_64-lkp commit=3D2b48961067b05= 9a9260e0378cd4d83a0c959f6ec modules_initrd=3D/kernel/x86_64-lkp/2b48961067b= 059a9260e0378cd4d83a0c959f6ec/modules.cgz max_uptime=3D3803 RESULT_ROOT=3D/= lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-btrfs-64G-1024-rndrw-sync= /x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/0 initrd=3D/kernel-tes= ts/initrd/lkp-rootfs.cgz root=3D/dev/ram0 ip=3D::::kbuildx-1::dhcp oops=3Dp= anic earlyprintk=3DttyS0,115200 debug apic=3Ddebug sysrq_always_enabled pan= ic=3D10 load_ramdisk=3D2 prompt_ramdisk=3D0 console=3DttyS0,115200 console= =3Dtty0 vga=3Dnormal [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable =3D=3D> rese= rved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn =3D 0x420000 max_arch_pfn =3D 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] e820: last_pfn =3D 0xdfffe max_arch_pfn =3D 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at = [ffff8800000fda90] [ 0.000000] mpc: fdaa0-fdbe4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02659000, 0x02659fff] PGTABLE [ 0.000000] BRK [0x0265a000, 0x0265afff] PGTABLE [ 0.000000] BRK [0x0265b000, 0x0265bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff] [ 0.000000] [mem 0x41fe00000-0x41fffffff] page 2M [ 0.000000] BRK [0x0265c000, 0x0265cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fdfffff] [ 0.000000] [mem 0x41c000000-0x41fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] BRK [0x0265d000, 0x0265dfff] PGTABLE [ 0.000000] BRK [0x0265e000, 0x0265efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x743aa000-0x7fffffff] [ 0.000000] ACPI: RSDP 00000000000fd880 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 00000000dfffe380 000034 (v01 BOCHS BXPCRSDT 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: FACP 00000000dfffff80 000074 (v01 BOCHS BXPCFACP 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: DSDT 00000000dfffe3c0 0011A9 (v01 BXPC BXDSDT 0000= 0001 INTL 20100528) [ 0.000000] ACPI: FACS 00000000dfffff40 000040 [ 0.000000] ACPI: SSDT 00000000dffff6e0 000858 (v01 BOCHS BXPCSSDT 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: APIC 00000000dffff5b0 000090 (v01 BOCHS BXPCAPIC 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: HPET 00000000dffff570 000038 (v01 BOCHS BXPCHPET 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff] [ 0.000000] NODE_DATA [mem 0x41ffed000-0x41fff1fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 4:1ffe5001, boot clock [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f60000= 0-ffff88041f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfffdfff] [ 0.000000] node 0: [mem 0x100000000-0x41fffffff] [ 0.000000] On node 0 totalpages: 4194204 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14272 pages used for memmap [ 0.000000] DMA32 zone: 913406 pages, LIFO batch:31 [ 0.000000] Normal zone: 51200 pages used for memmap [ 0.000000] Normal zone: 3276800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-= 23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC = INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC = INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC = INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC = INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC = INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC = INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC = INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC = INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC = INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC = INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC = INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC = INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC = INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC = INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC = INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 n= r_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041fc00000 s81024 r8192= d21376 u524288 [ 0.000000] pcpu-alloc: s81024 r8192 d21376 u524288 alloc=3D1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3=20 [ 0.000000] kvm-clock: cpu 0, msr 4:1ffe5001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 41fc0d040 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l pages: 4128647 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=3Dlkp job=3D/lkp/scheduled/kbuildx= -1/cyclic_fileio-600s-100%-1HDD-btrfs-64G-1024-rndrw-sync-HEAD.yaml ARCH=3D= x86_64 BOOT_IMAGE=3D/kernel/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959= f6ec/vmlinuz-3.13.0-rc6-01897-g2b48961 kconfig=3Dx86_64-lkp commit=3D2b4896= 1067b059a9260e0378cd4d83a0c959f6ec modules_initrd=3D/kernel/x86_64-lkp/2b48= 961067b059a9260e0378cd4d83a0c959f6ec/modules.cgz max_uptime=3D3803 RESULT_R= OOT=3D/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-btrfs-64G-1024-rnd= rw-sync/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/0 initrd=3D/ker= nel-tests/initrd/lkp-rootfs.cgz root=3D/dev/ram0 ip=3D::::kbuildx-1::dhcp o= ops=3Dpanic earlyprintk=3DttyS0,115200 debug apic=3Ddebug sysrq_always_enab= led panic=3D10 load_ramdisk=3D2 prompt_ramdisk=3D0 console=3DttyS0,115200 c= onsole=3Dtty0 vga=3Dnormal [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16231976K/16776816K available (10302K kernel code, 1= 232K rwdata, 4144K rodata, 1428K init, 1732K bss, 544840K reserved) [ 0.000000] SLUB: HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D4, N= odes=3D1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000]=20 [ 0.000000]=20 [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.13.0-rc6-01897-g2b48961 (kbuild@ant) (gcc ve= rsion 4.8.1 (Debian 4.8.1-8) ) #1 SMP Wed Jan 1 01:27:51 CST 2014 [ 0.000000] Command line: user=3Dlkp job=3D/lkp/scheduled/kbuildx-1/cycl= ic_fileio-600s-100%-1HDD-btrfs-64G-1024-rndrw-sync-HEAD.yaml ARCH=3Dx86_64 = BOOT_IMAGE=3D/kernel/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/vm= linuz-3.13.0-rc6-01897-g2b48961 kconfig=3Dx86_64-lkp commit=3D2b48961067b05= 9a9260e0378cd4d83a0c959f6ec modules_initrd=3D/kernel/x86_64-lkp/2b48961067b= 059a9260e0378cd4d83a0c959f6ec/modules.cgz max_uptime=3D3803 RESULT_ROOT=3D/= lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-btrfs-64G-1024-rndrw-sync= /x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/0 initrd=3D/kernel-tes= ts/initrd/lkp-rootfs.cgz root=3D/dev/ram0 ip=3D::::kbuildx-1::dhcp oops=3Dp= anic earlyprintk=3DttyS0,115200 debug apic=3Ddebug sysrq_always_enabled pan= ic=3D10 load_ramdisk=3D2 prompt_ramdisk=3D0 console=3DttyS0,115200 console= =3Dtty0 vga=3Dnormal [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reser= ved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable =3D=3D> rese= rved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn =3D 0x420000 max_arch_pfn =3D 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] e820: last_pfn =3D 0xdfffe max_arch_pfn =3D 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at = [ffff8800000fda90] [ 0.000000] mpc: fdaa0-fdbe4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02659000, 0x02659fff] PGTABLE [ 0.000000] BRK [0x0265a000, 0x0265afff] PGTABLE [ 0.000000] BRK [0x0265b000, 0x0265bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff] [ 0.000000] [mem 0x41fe00000-0x41fffffff] page 2M [ 0.000000] BRK [0x0265c000, 0x0265cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fdfffff] [ 0.000000] [mem 0x41c000000-0x41fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] BRK [0x0265d000, 0x0265dfff] PGTABLE [ 0.000000] BRK [0x0265e000, 0x0265efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x743aa000-0x7fffffff] [ 0.000000] ACPI: RSDP 00000000000fd880 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 00000000dfffe380 000034 (v01 BOCHS BXPCRSDT 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: FACP 00000000dfffff80 000074 (v01 BOCHS BXPCFACP 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: DSDT 00000000dfffe3c0 0011A9 (v01 BXPC BXDSDT 0000= 0001 INTL 20100528) [ 0.000000] ACPI: FACS 00000000dfffff40 000040 [ 0.000000] ACPI: SSDT 00000000dffff6e0 000858 (v01 BOCHS BXPCSSDT 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: APIC 00000000dffff5b0 000090 (v01 BOCHS BXPCAPIC 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: HPET 00000000dffff570 000038 (v01 BOCHS BXPCHPET 0000= 0001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff] [ 0.000000] NODE_DATA [mem 0x41ffed000-0x41fff1fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 4:1ffe5001, boot clock [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f60000= 0-ffff88041f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfffdfff] [ 0.000000] node 0: [mem 0x100000000-0x41fffffff] [ 0.000000] On node 0 totalpages: 4194204 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14272 pages used for memmap [ 0.000000] DMA32 zone: 913406 pages, LIFO batch:31 [ 0.000000] Normal zone: 51200 pages used for memmap [ 0.000000] Normal zone: 3276800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-= 23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC = INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC = INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC = INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC = INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC = INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC = INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC = INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC = INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC = INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC = INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC = INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC = INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC = INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC = INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC = INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 n= r_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041fc00000 s81024 r8192= d21376 u524288 [ 0.000000] pcpu-alloc: s81024 r8192 d21376 u524288 alloc=3D1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3=20 [ 0.000000] kvm-clock: cpu 0, msr 4:1ffe5001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 41fc0d040 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l pages: 4128647 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=3Dlkp job=3D/lkp/scheduled/kbuildx= -1/cyclic_fileio-600s-100%-1HDD-btrfs-64G-1024-rndrw-sync-HEAD.yaml ARCH=3D= x86_64 BOOT_IMAGE=3D/kernel/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959= f6ec/vmlinuz-3.13.0-rc6-01897-g2b48961 kconfig=3Dx86_64-lkp commit=3D2b4896= 1067b059a9260e0378cd4d83a0c959f6ec modules_initrd=3D/kernel/x86_64-lkp/2b48= 961067b059a9260e0378cd4d83a0c959f6ec/modules.cgz max_uptime=3D3803 RESULT_R= OOT=3D/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-btrfs-64G-1024-rnd= rw-sync/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/0 initrd=3D/ker= nel-tests/initrd/lkp-rootfs.cgz root=3D/dev/ram0 ip=3D::::kbuildx-1::dhcp o= ops=3Dpanic earlyprintk=3DttyS0,115200 debug apic=3Ddebug sysrq_always_enab= led panic=3D10 load_ramdisk=3D2 prompt_ramdisk=3D0 console=3DttyS0,115200 c= onsole=3Dtty0 vga=3Dnormal [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16231976K/16776816K available (10302K kernel code, 1= 232K rwdata, 4144K rodata, 1428K init, 1732K bss, 544840K reserved) [ 0.000000] SLUB: HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D4, N= odes=3D1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000]=20 [ 0.000000]=20 [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=3Dmemory' option if you don't wan= t memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.544 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5387.08 Bogo= MIPS (lpj=3D10774176) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.009006] Dentry cache hash table entries: 2097152 (order: 12, 1677721= 6 bytes) [ 0.023733] Inode-cache hash table entries: 1048576 (order: 11, 8388608 = bytes) [ 0.031251] Mount-cache hash table entries: 256 [ 0.032304] Initializing cgroup subsys memory [ 0.033218] Initializing cgroup subsys devices [ 0.034119] Initializing cgroup subsys freezer [ 0.035012] Initializing cgroup subsys blkio [ 0.036005] Initializing cgroup subsys perf_event [ 0.036937] Initializing cgroup subsys hugetlb [ 0.037901] mce: CPU supports 10 MCE banks [ 0.038802] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.038802] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.038802] tlb_flushall_shift: 6 [ 0.040082] Freeing SMP alternatives memory: 44K (ffffffff8249b000 - fff= fffff824a6000) [ 0.047632] ACPI: Core revision 20131115 [ 0.048701] ACPI: All ACPI Tables successfully acquired [ 0.049803] ftrace: allocating 39670 entries in 155 pages [ 0.060170] Getting VERSION: 50014 [ 0.061018] Getting VERSION: 50014 [ 0.061834] Getting ID: 0 [ 0.062560] Getting ID: ff000000 [ 0.064012] Getting LVT0: 8700 [ 0.064774] Getting LVT1: 8400 [ 0.065601] enabled ExtINT on CPU#0 [ 0.067154] ENABLING IO-APIC IRQs [ 0.068007] init IO_APIC IRQs [ 0.068762] apic 0 pin 0 not connected [ 0.069623] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Ac= tive:0 Dest:1) [ 0.071397] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Ac= tive:0 Dest:1) [ 0.072018] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Ac= tive:0 Dest:1) [ 0.073697] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Ac= tive:0 Dest:1) [ 0.076017] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Ac= tive:0 Dest:1) [ 0.077692] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Ac= tive:0 Dest:1) [ 0.080016] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Ac= tive:0 Dest:1) [ 0.081619] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Ac= tive:0 Dest:1) [ 0.083241] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Ac= tive:0 Dest:1) [ 0.084016] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 = Active:0 Dest:1) [ 0.085653] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 = Active:0 Dest:1) [ 0.088016] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 = Active:0 Dest:1) [ 0.089647] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 = Active:0 Dest:1) [ 0.091276] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 = Active:0 Dest:1) [ 0.092016] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 = Active:0 Dest:1) [ 0.093675] apic 0 pin 16 not connected [ 0.094478] apic 0 pin 17 not connected [ 0.096003] apic 0 pin 18 not connected [ 0.096827] apic 0 pin 19 not connected [ 0.097629] apic 0 pin 20 not connected [ 0.098439] apic 0 pin 21 not connected [ 0.100003] apic 0 pin 22 not connected [ 0.100794] apic 0 pin 23 not connected [ 0.101788] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D= -1 [ 0.102955] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 0= 6, stepping: 01) [ 0.104935] Using local APIC timer interrupts. [ 0.104935] calibrating APIC timer ... [ 0.108000] ... lapic delta =3D 6250191 [ 0.108000] ... PM-Timer delta =3D 358009 [ 0.108000] ... PM-Timer result ok [ 0.108000] ..... delta 6250191 [ 0.108000] ..... mult: 268443659 [ 0.108000] ..... calibration result: 4000122 [ 0.108000] ..... CPU clock speed is 2693.3693 MHz. [ 0.108000] ..... host bus clock speed is 1000.0122 MHz. [ 0.108056] Performance Events: unsupported Netburst CPU model 6 no PMU = driver, software events only. [ 0.111842] x86: Booting SMP configuration: [ 0.112003] .... node #0, CPUs: #1 [ 0.008000] kvm-clock: cpu 1, msr 4:1ffe5041, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.128033] KVM setup async PF for cpu 1 #2 [ 0.129465] kvm-stealtime: cpu 1, msr 41fc8d040 [ 0.008000] kvm-clock: cpu 2, msr 4:1ffe5081, secondary cpu clock [ 0.008000] masked ExtINT on CPU#2 [ 0.144036] KVM setup async PF for cpu 2 #3 [ 0.145360] kvm-stealtime: cpu 2, msr 41fd0d040 [ 0.008000] kvm-clock: cpu 3, msr 4:1ffe50c1, secondary cpu clock [ 0.008000] masked ExtINT on CPU#3 [ 0.160068] x86: Booted up 1 node, 4 CPUs [ 0.160046] KVM setup async PF for cpu 3 [ 0.160046] kvm-stealtime: cpu 3, msr 41fd8d040 [ 0.164005] smpboot: Total of 4 processors activated (21548.35 BogoMIPS) [ 0.165781] devtmpfs: initialized [ 0.172982] xor: measuring software checksum speed [ 0.212035] prefetch64-sse: 181.000 MB/sec [ 0.252013] generic_sse: 159.000 MB/sec [ 0.252920] xor: using function: prefetch64-sse (181.000 MB/sec) [ 0.254040] atomic64 test passed for x86-64 platform with CX8 and with S= SE [ 0.255264] NET: Registered protocol family 16 [ 0.256571] cpuidle: using governor ladder [ 0.256993] cpuidle: using governor menu [ 0.260221] ACPI: bus type PCI registered [ 0.261208] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.263114] PCI: Using configuration type 1 for base access [ 0.312097] bio: create slab at 0 [ 0.378885] raid6: sse2x1 7594 MB/s [ 0.446887] raid6: sse2x2 9857 MB/s [ 0.514884] raid6: sse2x4 12038 MB/s [ 0.515952] raid6: using algorithm sse2x4 (12038 MB/s) [ 0.516015] raid6: using intx1 recovery algorithm [ 0.517521] ACPI: Added _OSI(Module Device) [ 0.520005] ACPI: Added _OSI(Processor Device) [ 0.520907] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.521823] ACPI: Added _OSI(Processor Aggregator Device) [ 0.526631] ACPI: Interpreter enabled [ 0.527377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [= \_S1_] (20131115/hwxface-580) [ 0.528602] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [= \_S2_] (20131115/hwxface-580) [ 0.530365] ACPI: (supports S0 S3 S4 S5) [ 0.531122] ACPI: Using IOAPIC for interrupt routing [ 0.532048] PCI: Using host bridge windows from ACPI; if necessary, use = "pci=3Dnocrs" and report a bug [ 0.533906] ACPI: No dock devices found. [ 0.540176] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.541164] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MS= I] [ 0.544023] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.545243] acpi PNP0A03:00: fail to add MMCONFIG information, can't acc= ess extended PCI configuration space under this bridge. [ 0.548364] acpiphp: Slot [3] registered [ 0.549007] acpiphp: Slot [4] registered [ 0.549007] acpiphp: Slot [5] registered [ 0.549007] acpiphp: Slot [6] registered [ 0.552093] acpiphp: Slot [7] registered [ 0.553195] acpiphp: Slot [8] registered [ 0.553203] acpiphp: Slot [9] registered [ 0.556044] acpiphp: Slot [10] registered [ 0.556897] acpiphp: Slot [11] registered [ 0.556897] acpiphp: Slot [12] registered [ 0.556897] acpiphp: Slot [13] registered [ 0.560055] acpiphp: Slot [14] registered [ 0.560901] acpiphp: Slot [15] registered [ 0.560901] acpiphp: Slot [16] registered [ 0.560901] acpiphp: Slot [17] registered [ 0.560901] acpiphp: Slot [18] registered [ 0.564046] acpiphp: Slot [19] registered [ 0.564905] acpiphp: Slot [20] registered [ 0.564905] acpiphp: Slot [21] registered [ 0.564905] acpiphp: Slot [22] registered [ 0.568067] acpiphp: Slot [23] registered [ 0.568881] acpiphp: Slot [24] registered [ 0.568881] acpiphp: Slot [25] registered [ 0.568881] acpiphp: Slot [26] registered [ 0.568881] acpiphp: Slot [27] registered [ 0.572051] acpiphp: Slot [28] registered [ 0.572867] acpiphp: Slot [29] registered [ 0.572867] acpiphp: Slot [30] registered [ 0.572867] acpiphp: Slot [31] registered [ 0.576028] PCI host bridge to bus 0000:00 [ 0.577586] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.579220] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.580007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.581568] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bfff= f] [ 0.584005] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebffff= f] [ 0.585932] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.588087] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.590209] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.594746] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf] [ 0.597199] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.597417] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX= 4 ACPI [ 0.600022] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX= 4 SMB [ 0.601344] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.608042] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.610507] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.618094] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.620531] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.622185] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.624997] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.632503] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.633818] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.636016] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.638091] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.644857] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.646210] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 0.649004] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 0.656279] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.658168] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 0.660505] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 0.666813] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.669068] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 0.671106] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 0.677348] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.678078] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 0.681031] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 0.688075] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.690184] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 0.692004] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 0.698228] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.700279] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f] [ 0.704453] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.705871] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.707258] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.708964] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.710379] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.712200] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.713350] vgaarb: device added: PCI:0000:00:02.0,decodes=3Dio+mem,owns= =3Dio+mem,locks=3Dnone [ 0.713679] vgaarb: loaded [ 0.714434] vgaarb: bridge control possible 0000:00:02.0 [ 0.716202] SCSI subsystem initialized [ 0.716917] libata version 3.00 loaded. [ 0.720034] ACPI: bus type USB registered [ 0.720905] usbcore: registered new interface driver usbfs [ 0.721059] usbcore: registered new interface driver hub [ 0.724078] usbcore: registered new device driver usb [ 0.724078] pps_core: LinuxPPS API ver. 1 registered [ 0.725797] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo = Giometti [ 0.728097] PTP clock support registered [ 0.732106] EDAC MC: Ver: 3.0.0 [ 0.733061] PCI: Using ACPI for IRQ routing [ 0.733061] PCI: pci_cache_line_size set to 64 bytes [ 0.734072] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.735167] e820: reserve RAM buffer [mem 0xdfffe000-0xdfffffff] [ 0.736612] HPET: 3 timers in total, 0 timers will be used for per-cpu t= imer [ 0.737838] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.739080] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.744096] Switched to clocksource kvm-clock [ 0.758657] pnp: PnP ACPI init [ 0.759447] ACPI: bus type PNP registered [ 0.760409] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Ac= tive:0 Dest:15) [ 0.762193] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.763373] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Ac= tive:0 Dest:15) [ 0.765190] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.766354] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 = Active:0 Dest:15) [ 0.768103] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.769263] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Ac= tive:0 Dest:15) [ 0.770916] pnp 00:03: [dma 2] [ 0.771809] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.773047] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Ac= tive:0 Dest:15) [ 0.774831] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.775994] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Ac= tive:0 Dest:15) [ 0.777982] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.779747] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.781341] pnp: PnP ACPI: found 7 devices [ 0.782259] ACPI: bus type PNP unregistered [ 0.801131] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.802446] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.803507] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.804893] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff] [ 0.806278] NET: Registered protocol family 2 [ 0.807540] TCP established hash table entries: 131072 (order: 8, 104857= 6 bytes) [ 0.809831] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.811684] TCP: Hash tables configured (established 131072 bind 65536) [ 0.813155] TCP: reno registered [ 0.813939] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.815209] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.816683] NET: Registered protocol family 1 [ 0.817939] RPC: Registered named UNIX socket transport module. [ 0.818996] RPC: Registered udp transport module. [ 0.819911] RPC: Registered tcp transport module. [ 0.820852] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.821969] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.823043] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.824141] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.825249] pci 0000:00:02.0: Boot video device [ 0.826217] PCI: CLS 0 bytes, default 64 [ 0.827144] Trying to unpack rootfs image as initramfs... [ 4.698459] Freeing initrd memory: 192856K (ffff8800743aa000 - ffff88008= 0000000) [ 4.699977] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.701070] software IO TLB [mem 0xdbffe000-0xdfffe000] (64MB) mapped at= [ffff8800dbffe000-ffff8800dfffdfff] [ 4.703225] kvm: no hardware support [ 4.706041] Scanning for low memory corruption every 60 seconds [ 4.707482] camellia-x86_64: performance on this CPU would be suboptimal= : disabling camellia-x86_64. [ 4.709717] blowfish-x86_64: performance on this CPU would be suboptimal= : disabling blowfish-x86_64. [ 4.711626] twofish-x86_64-3way: performance on this CPU would be subopt= imal: disabling twofish-x86_64-3way. [ 4.715238] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 4.716801] PCLMULQDQ-NI instructions are not detected. [ 4.718642] AVX or AES-NI instructions are not detected. [ 4.720228] AVX instructions are not detected. [ 4.721655] AVX instructions are not detected. [ 4.722924] AVX instructions are not detected. [ 4.723805] AVX instructions are not detected. [ 4.756490] bounce pool size: 64 pages [ 4.757346] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.766836] VFS: Disk quotas dquot_6.5.2 [ 4.767766] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.771543] NFS: Registering the id_resolver key type [ 4.772502] Key type id_resolver registered [ 4.773319] Key type id_legacy registered [ 4.774185] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.775270] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.777282] ROMFS MTD (C) 2007 Red Hat, Inc. [ 4.778579] fuse init (API version 7.22) [ 4.779972] SGI XFS with ACLs, security attributes, realtime, large bloc= k/inode numbers, no debug enabled [ 4.783212] bio: create slab at 1 [ 4.784703] Btrfs loaded [ 4.785407] msgmni has been set to 32079 [ 4.789658] NET: Registered protocol family 38 [ 4.790554] Key type asymmetric registered [ 4.791689] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma= jor 250) [ 4.793472] io scheduler noop registered [ 4.794330] io scheduler deadline registered [ 4.795207] io scheduler cfq registered (default) [ 4.797203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.799361] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 4.800955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/inpu= t/input0 [ 4.803020] ACPI: Power Button [PWRF] [ 4.804430] GHES: HEST is not enabled! [ 4.806611] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 4.807669] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 = Active:0 Dest:15) [ 4.810981] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 4.812086] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 = Active:0 Dest:15) [ 4.815592] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 4.818516] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 4.826862] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.849431] 00:05: ttyS0 at I/O 0x3f8 (irq =3D 4, base_baud =3D 115200) = is a 16550A [ 4.853644] Non-volatile memory driver v1.3 [ 4.858593] brd: module loaded [ 4.861551] loop: module loaded [ 4.862466] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X [ 4.863820] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X [ 4.865414] blk-mq: CPU -> queue map [ 4.866443] CPU 0 -> Queue 0 [ 4.867171] CPU 1 -> Queue 0 [ 4.867892] CPU 2 -> Queue 0 [ 4.868611] CPU 3 -> Queue 0 [ 4.870640] vda: unknown partition table [ 4.874591] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X [ 4.875613] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X [ 4.876830] blk-mq: CPU -> queue map [ 4.877631] CPU 0 -> Queue 0 [ 4.878361] CPU 1 -> Queue 0 [ 4.879100] CPU 2 -> Queue 0 [ 4.879834] CPU 3 -> Queue 0 [ 4.881512] vdb: unknown partition table [ 4.884855] virtio-pci 0000:00:06.0: irq 44 for MSI/MSI-X [ 4.885840] virtio-pci 0000:00:06.0: irq 45 for MSI/MSI-X [ 4.886992] blk-mq: CPU -> queue map [ 4.893035] CPU 0 -> Queue 0 [ 4.893786] CPU 1 -> Queue 0 [ 4.894474] CPU 2 -> Queue 0 [ 4.895165] CPU 3 -> Queue 0 [ 4.896887] vdc: unknown partition table [ 4.899406] virtio-pci 0000:00:07.0: irq 46 for MSI/MSI-X [ 4.901737] virtio-pci 0000:00:07.0: irq 47 for MSI/MSI-X [ 4.903440] blk-mq: CPU -> queue map [ 4.904223] CPU 0 -> Queue 0 [ 4.904954] CPU 1 -> Queue 0 [ 4.905672] CPU 2 -> Queue 0 [ 4.906389] CPU 3 -> Queue 0 [ 4.908120] vdd: unknown partition table [ 4.912956] virtio-pci 0000:00:08.0: irq 48 for MSI/MSI-X [ 4.914270] virtio-pci 0000:00:08.0: irq 49 for MSI/MSI-X [ 4.915722] blk-mq: CPU -> queue map [ 4.916765] CPU 0 -> Queue 0 [ 4.917577] CPU 1 -> Queue 0 [ 4.918438] CPU 2 -> Queue 0 [ 4.919382] CPU 3 -> Queue 0 [ 4.921412] vde: unknown partition table [ 4.924704] virtio-pci 0000:00:09.0: irq 50 for MSI/MSI-X [ 4.925663] virtio-pci 0000:00:09.0: irq 51 for MSI/MSI-X [ 4.926778] blk-mq: CPU -> queue map [ 4.927559] CPU 0 -> Queue 0 [ 4.928274] CPU 1 -> Queue 0 [ 4.929011] CPU 2 -> Queue 0 [ 4.929709] CPU 3 -> Queue 0 [ 4.931400] vdf: unknown partition table [ 4.934199] lkdtm: No crash points registered, enable through debugfs [ 4.936564] Loading iSCSI transport class v2.0-870. [ 4.938839] Adaptec aacraid driver 1.2-0[30200]-ms [ 4.939927] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 4.941289] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driv= er: 8.06.00.08-k. [ 4.943239] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 ES= T 2006) [ 4.945189] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 20= 06) [ 4.946717] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013 [ 4.947972] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 4.949145] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 4.950689] ata_piix 0000:00:01.1: version 2.13 [ 4.954086] scsi0 : ata_piix [ 4.955086] scsi1 : ata_piix [ 4.955961] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1c0 irq 14 [ 4.957140] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1c8 irq 15 [ 4.959389] tun: Universal TUN/TAP device driver, 1.6 [ 4.960399] tun: (C) 1999-2004 Max Krasnyansky [ 4.961865] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.= de [ 4.963346] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 4.964597] Copyright (c) 2007 Atheros Corporation. [ 4.965919] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 4.967387] v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 4.967387] http://www.scyld.com/network/drivers.html [ 4.970083] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-2= 9) [ 4.971681] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.972951] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.974064] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-= NAPI [ 4.975266] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 5.112677] ata2.01: NODEV after polling detection [ 5.114826] ata2.00: ATAPI: QEMU DVD-ROM, 1.6.0, max UDMA/100 [ 5.116377] ata2.00: configured for MWDMA2 [ 5.118241] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.= 6. PQ: 0 ANSI: 5 [ 5.121213] scsi 1:0:0:0: Attached scsi generic sg0 type 5 [ 5.313493] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 5.314954] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.316595] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 5.318335] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 5.319729] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.= 5-k [ 5.321197] igb: Copyright (c) 2007-2013 Intel Corporation. [ 5.322683] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - vers= ion 3.15.1-k [ 5.326153] ixgbe: Copyright (c) 1999-2013 Intel Corporation. [ 5.328828] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2= -NAPI [ 5.331631] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 5.333514] sky2: driver version 1.30 [ 5.337267] usbcore: registered new interface driver catc [ 5.338500] usbcore: registered new interface driver kaweth [ 5.339552] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Etherne= t driver [ 5.341356] usbcore: registered new interface driver pegasus [ 5.342689] usbcore: registered new interface driver rtl8150 [ 5.343946] usbcore: registered new interface driver asix [ 5.345242] usbcore: registered new interface driver ax88179_178a [ 5.346466] usbcore: registered new interface driver cdc_ether [ 5.347660] usbcore: registered new interface driver r815x [ 5.348811] usbcore: registered new interface driver cdc_eem [ 5.349982] usbcore: registered new interface driver dm9601 [ 5.351127] usbcore: registered new interface driver smsc75xx [ 5.352337] usbcore: registered new interface driver smsc95xx [ 5.353474] usbcore: registered new interface driver gl620a [ 5.354586] usbcore: registered new interface driver net1080 [ 5.355737] usbcore: registered new interface driver plusb [ 5.356889] usbcore: registered new interface driver rndis_host [ 5.358057] usbcore: registered new interface driver cdc_subset [ 5.359245] usbcore: registered new interface driver zaurus [ 5.360424] usbcore: registered new interface driver MOSCHIP usb-etherne= t driver [ 5.362140] usbcore: registered new interface driver int51x1 [ 5.363282] usbcore: registered new interface driver ipheth [ 5.364413] usbcore: registered new interface driver sierra_net [ 5.365569] usbcore: registered new interface driver cdc_ncm [ 5.366615] Fusion MPT base driver 3.04.20 [ 5.367467] Copyright (c) 1999-2008 LSI Corporation [ 5.368440] Fusion MPT SPI Host driver 3.04.20 [ 5.369528] Fusion MPT FC Host driver 3.04.20 [ 5.370526] Fusion MPT SAS Host driver 3.04.20 [ 5.371554] Fusion MPT misc device (ioctl) driver 3.04.20 [ 5.372708] mptctl: Registered with Fusion MPT base driver [ 5.373762] mptctl: /dev/mptctl @ (major,minor=3D10,220) [ 5.375025] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.376168] ehci-pci: EHCI PCI platform driver [ 5.377142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.378228] ohci-pci: OHCI PCI platform driver [ 5.379187] uhci_hcd: USB Universal Host Controller Interface driver [ 5.380470] usbcore: registered new interface driver usb-storage [ 5.381609] usbcore: registered new interface driver ums-alauda [ 5.382798] usbcore: registered new interface driver ums-datafab [ 5.383930] usbcore: registered new interface driver ums-freecom [ 5.385103] usbcore: registered new interface driver ums-isd200 [ 5.386220] usbcore: registered new interface driver ums-jumpshot [ 5.387365] usbcore: registered new interface driver ums-sddr09 [ 5.388509] usbcore: registered new interface driver ums-sddr55 [ 5.389640] usbcore: registered new interface driver ums-usbat [ 5.390775] usbcore: registered new interface driver usbtest [ 5.391969] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x6= 0,0x64 irq 1,12 [ 5.394351] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.395371] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.396724] mousedev: PS/2 mouse device common for all mice [ 5.398541] rtc_cmos 00:00: RTC can wake from S4 [ 5.399674] input: AT Translated Set 2 keyboard as /devices/platform/i80= 42/serio0/input/input1 [ 5.401640] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 5.403513] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet = irqs [ 5.405246] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 5.407517] i6300esb: initialized (0xffffc90001ac2000). heartbeat=3D30 s= ec (nowayout=3D0) [ 5.410409] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.411849] iTCO_vendor_support: vendor-support=3D0 [ 5.413001] watchdog: Software Watchdog: cannot register miscdev on mino= r=3D130 (err=3D-16). [ 5.414932] watchdog: Software Watchdog: a legacy watchdog module is pro= bably present. [ 5.417135] softdog: Software Watchdog Timer: 0.08 initialized. soft_nob= oot=3D0 soft_margin=3D60 sec soft_panic=3D0 (nowayout=3D0) [ 5.419573] md: linear personality registered for level -1 [ 5.420757] md: raid0 personality registered for level 0 [ 5.421990] md: raid1 personality registered for level 1 [ 5.423173] md: raid10 personality registered for level 10 [ 5.424513] md: raid6 personality registered for level 6 [ 5.425668] md: raid5 personality registered for level 5 [ 5.426947] md: raid4 personality registered for level 4 [ 5.428117] md: multipath personality registered for level -4 [ 5.429326] md: faulty personality registered for level -5 [ 5.431532] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:= dm-devel@redhat.com [ 5.433751] device-mapper: multipath: version 1.6.0 loaded [ 5.435017] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.436353] device-mapper: cache-policy-mq: version 1.1.0 loaded [ 5.437495] device-mapper: cache cleaner: version 1.0.0 loaded [ 5.439115] dcdbas dcdbas: Dell Systems Management Base Driver (version = 5.6.0-3.2) [ 5.443797] usbcore: registered new interface driver usbhid [ 5.444885] usbhid: USB HID core driver [ 5.446060] TCP: bic registered [ 5.446912] Initializing XFRM netlink socket [ 5.448333] NET: Registered protocol family 10 [ 5.449589] sit: IPv6 over IPv4 tunneling driver [ 5.451027] NET: Registered protocol family 17 [ 5.452031] 8021q: 802.1Q VLAN Support v1.8 [ 5.454483] sctp: Hash tables configured (established 65536 bind 65536) [ 5.456106] Key type dns_resolver registered [ 5.458305]=20 [ 5.458305] printing PIC contents [ 5.459829] ... PIC IMR: ffff [ 5.460881] ... PIC IRR: 9113 [ 5.461962] ... PIC ISR: 0000 [ 5.463564] ... PIC ELCR: 0c00 [ 5.474771] printing local APIC contents on CPU#0/0: [ 5.476321] ... APIC ID: 00000000 (0) [ 5.478006] ... APIC VERSION: 00050014 [ 5.478757] ... APIC TASKPRI: 00000000 (00) [ 5.478757] ... APIC PROCPRI: 00000000 [ 5.478757] ... APIC LDR: 01000000 [ 5.478757] ... APIC DFR: ffffffff [ 5.478757] ... APIC SPIV: 000001ff [ 5.478757] ... APIC ISR field: [ 5.478757] 000000000000000000000000000000000000000000000000000000000000= 0000 [ 5.478757] ... APIC TMR field: [ 5.478757] 000000000200000000000000000000000000000000000000000000000000= 0000 [ 5.478757] ... APIC IRR field: [ 5.478757] 000000000000000000000000000000000000000000000000000000000000= 8000 [ 5.478757] ... APIC ESR: 00000000 [ 5.478757] ... APIC ICR: 000400f6 [ 5.478757] ... APIC ICR2: 02000000 [ 5.478757] ... APIC LVTT: 000000ef [ 5.478757] ... APIC LVTPC: 00010000 [ 5.478757] ... APIC LVT0: 00010700 [ 5.478757] ... APIC LVT1: 00000400 [ 5.478757] ... APIC LVTERR: 000000fe [ 5.478757] ... APIC TMICT: 0003cabb [ 5.478757] ... APIC TMCCT: 00000000 [ 5.478757] ... APIC TDCR: 00000003 [ 5.478757]=20 [ 5.506809] number of MP IRQ sources: 15. [ 5.507832] number of IO-APIC #0 registers: 24. [ 5.508915] testing the IO APIC....................... [ 5.510073] IO APIC #0...... [ 5.510929] .... register #00: 00000000 [ 5.511899] ....... : physical APIC id: 00 [ 5.512966] ....... : Delivery Type: 0 [ 5.513962] ....... : LTS : 0 [ 5.514961] .... register #01: 00170011 [ 5.515944] ....... : max redirection entries: 17 [ 5.517096] ....... : PRQ implemented: 0 [ 5.518126] ....... : IO APIC version: 11 [ 5.519170] .... register #02: 00000000 [ 5.520159] ....... : arbitration: 00 [ 5.521158] .... IRQ redirection table: [ 5.522144] 1 0 0 0 0 0 0 00 [ 5.523232] 0 0 0 0 0 1 1 31 [ 5.524322] 0 0 0 0 0 1 1 30 [ 5.525399] 0 0 0 0 0 1 1 33 [ 5.526474] 1 0 0 0 0 1 1 34 [ 5.527549] 1 1 0 0 0 1 1 35 [ 5.529018] 0 0 0 0 0 1 1 36 [ 5.530363] 0 0 0 0 0 1 1 37 [ 5.531438] 0 0 0 0 0 1 1 38 [ 5.532816] 0 1 0 0 0 1 1 39 [ 5.533893] 1 1 0 0 0 1 1 3A [ 5.534972] 1 1 0 0 0 1 1 3B [ 5.536066] 0 0 0 0 0 1 1 3C [ 5.537143] 0 0 0 0 0 1 1 3D [ 5.538485] 0 0 0 0 0 1 1 3E [ 5.539570] 0 0 0 0 0 1 1 3F [ 5.540669] 1 0 0 0 0 0 0 00 [ 5.542095] 1 0 0 0 0 0 0 00 [ 5.543202] 1 0 0 0 0 0 0 00 [ 5.544294] 1 0 0 0 0 0 0 00 [ 5.545369] 1 0 0 0 0 0 0 00 [ 5.546444] 1 0 0 0 0 0 0 00 [ 5.547517] 1 0 0 0 0 0 0 00 [ 5.548611] 1 0 0 0 0 0 0 00 [ 5.549676] IRQ to pin mappings: [ 5.550568] IRQ0 -> 0:2 [ 5.551528] IRQ1 -> 0:1 [ 5.552502] IRQ3 -> 0:3 [ 5.553476] IRQ4 -> 0:4 [ 5.554433] IRQ5 -> 0:5 [ 5.555393] IRQ6 -> 0:6 [ 5.556369] IRQ7 -> 0:7 [ 5.557332] IRQ8 -> 0:8 [ 5.558294] IRQ9 -> 0:9 [ 5.559251] IRQ10 -> 0:10 [ 5.560245] IRQ11 -> 0:11 [ 5.561234] IRQ12 -> 0:12 [ 5.562219] IRQ13 -> 0:13 [ 5.563205] IRQ14 -> 0:14 [ 5.564200] IRQ15 -> 0:15 [ 5.565188] .................................... done. [ 5.567474] registered taskstats version 1 [ 5.569933] rtc_cmos 00:00: setting system clock to 2014-01-01 01:40:50 = UTC (1388540450) [ 5.571893] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 5.578898] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.580167] 8021q: adding VLAN 0 to HW filter on device eth0 [ 5.704090] tsc: Refined TSC clocksource calibration: 2693.502 MHz [ 6.027178] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/= i8042/serio1/input/input3 [ 7.584524] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Contr= ol: RX [ 7.588065] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.604052] Sending DHCP requests ., OK [ 7.664056] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0= =2E2.15 [ 7.666284] IP-Config: Complete: [ 7.667935] device=3Deth0, hwaddr=3D52:54:00:12:34:56, ipaddr=3D10.= 0.2.15, mask=3D255.255.255.0, gw=3D10.0.2.2 [ 7.673247] host=3Dkbuildx-1, domain=3D, nis-domain=3D(none) [ 7.674893] bootserver=3D10.0.2.2, rootserver=3D10.0.2.2, rootpath= =3D [ 7.676434] nameserver0=3D10.0.2.3 [ 7.678717] PM: Hibernation image not present or could not be loaded. [ 7.682720] Freeing unused kernel memory: 1428K (ffffffff82336000 - ffff= ffff8249b000) [ 7.684857] Write protecting the kernel read-only data: 18432k [ 7.694035] Freeing unused kernel memory: 1972K (ffff880001a13000 - ffff= 880001c00000) [ 7.701348] Freeing unused kernel memory: 2000K (ffff88000200c000 - ffff= 880002200000) [ 8.014945] microcode: CPU0 sig=3D0xf61, pf=3D0x1, revision=3D0x1 [ 8.021651] platform microcode: Direct firmware load failed with error -2 [ 8.023340] platform microcode: Falling back to user helper [ 8.059021] microcode: CPU1 sig=3D0xf61, pf=3D0x1, revision=3D0x1 [ 8.060704] platform microcode: Direct firmware load failed with error -2 [ 8.062061] platform microcode: Falling back to user helper [ 8.067301] microcode: CPU2 sig=3D0xf61, pf=3D0x1, revision=3D0x1 [ 8.068548] platform microcode: Direct firmware load failed with error -2 [ 8.069917] platform microcode: Falling back to user helper [ 8.074719] microcode: CPU3 sig=3D0xf61, pf=3D0x1, revision=3D0x1 [ 8.075982] platform microcode: Direct firmware load failed with error -2 [ 8.077384] platform microcode: Falling back to user helper [ 8.082609] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.543642] random: vgscan urandom read with 21 bits of entropy available =3D=3D> /tmp/run_log <=3D=3D Kernel tests: Boot OK! PATH=3D/sbin:/usr/sbin:/bin:/usr/bin =3D=3D> /tmp/err_log <=3D=3D =3D=3D> /tmp/run_log <=3D=3D downloading latest lkp src code Files /etc/init.d/nfsroot and /lkp/lkp/src/rootfs/addon/etc/init.d/nfsroot = differ find a new version of this script, reloading... Kernel tests: Boot OK 2! /lkp/lkp/src/bin/run-lkp LKP_SRC_DIR=3D/lkp/lkp/src Stopping watchdog keepalive daemon.... Starting watchdog daemon.... RESULT_ROOT=3D/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-btrfs-64G-= 1024-rndrw-sync/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/0 job=3D/lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-btrfs-64G-1024-= rndrw-sync-HEAD.yaml 2014-01-01 01:41:11 mount -t debugfs none /sys/kernel/debug run-job /lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-btrfs-64G-102= 4-rndrw-sync-HEAD.yaml run: /lkp/lkp/src/setup/runtime 600s run: /lkp/lkp/src/setup/nr_threads 100% run: /lkp/lkp/src/setup/disk run: /lkp/lkp/src/setup/fs 2014-01-01 01:41:12 mkfs -t btrfs /dev/vdb run: /lkp/lkp/src/monitors/event/wait pre-test [ 23.951722] btrfs: device fsid bd8e28ba-1b7a-4950-8545-072c1c32e60b=20 WARNING! - Btrfs v0.20-rc1-566-gd1570a0 IS EXPERIMENTAL WARNING! - see http://btrfs.wiki.kernel.org before using fs created label (null) on /dev/vdb Btrfs v0.20-rc1-566-gd1570a0 devid 1 transid 4 /dev/vdb 2014-01-01 01:41:12 mount -t btrfs /dev/vdb /fs/vdb [ 23.969393] btrfs: device fsid bd8e28ba-1b7a-4950-8545-072c1c32e60b devi= d 1 transid 4 /dev/vdb [ 23.975019] btrfs: disk space caching is enabled [ 23.981152] btrfs: creating UUID tree run: /lkp/lkp/src/setup/size 64G run: pre-test run: /lkp/lkp/src/monitors/wrapper uptime run: /lkp/lkp/src/monitors/wrapper iostat run: /lkp/lkp/src/monitors/wrapper vmstat run: /lkp/lkp/src/monitors/wrapper numa-numastat run: /lkp/lkp/src/monitors/wrapper numa-vmstat run: /lkp/lkp/src/monitors/wrapper numa-meminfo run: /lkp/lkp/src/monitors/wrapper proc-vmstat run: /lkp/lkp/src/monitors/wrapper meminfo run: /lkp/lkp/src/monitors/wrapper slabinfo run: /lkp/lkp/src/monitors/wrapper buddyinfo run: /lkp/lkp/src/monitors/wrapper pagetypeinfo run: /lkp/lkp/src/monitors/wrapper interrupts run: /lkp/lkp/src/monitors/wrapper lock_stat run: /lkp/lkp/src/monitors/wrapper softirqs run: /lkp/lkp/src/monitors/wrapper bdi_dev_mapping run: /lkp/lkp/src/monitors/wrapper pmeter run: /lkp/lkp/src/monitors/wrapper diskstats run: /lkp/lkp/src/monitors/wrapper zoneinfo run: /lkp/lkp/src/monitors/wrapper energy run: /usr/bin/time -v -o /tmp/time /lkp/lkp/src/tests/sysbench/wrapper file= io [ 35.466413] random: nonblocking pool is initialized [ 196.918039] ------------[ cut here ]------------ [ 196.919770] kernel BUG at fs/bio.c:1748! [ 196.921505] invalid opcode: 0000 [#1] SMP=20 [ 196.921788] Modules linked in: microcode processor [ 196.921788] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc6-01897-g= 2b48961 #1 [ 196.921788] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 196.921788] task: ffff8804094acad0 ti: ffff8804094e8000 task.ti: ffff880= 4094e8000 [ 196.921788] RIP: 0010:[] [] bio_end= io+0x1e/0x6a [ 196.921788] RSP: 0018:ffff88041fc83da8 EFLAGS: 00010046 [ 196.921788] RAX: 0000000000000000 RBX: 00000000fffffffb RCX: 00000001802= a0002 [ 196.921788] RDX: 00000001802a0003 RSI: 0000000000000000 RDI: ffff8800299= ff9e8 [ 196.921788] RBP: ffff88041fc83dc0 R08: ffffea00096cc980 R09: ffff8804097= f5100 [ 196.921788] R10: ffffea000aeb8280 R11: ffffffff8143841e R12: ffff88025b3= 26780 [ 196.921788] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000= 03000 [ 196.921788] FS: 0000000000000000(0000) GS:ffff88041fc80000(0000) knlGS:= 0000000000000000 [ 196.921788] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 196.921788] CR2: 00007f16e7a1948f CR3: 000000007f85e000 CR4: 00000000000= 006e0 [ 196.921788] Stack: [ 196.921788] ffff8800299ff9e8 ffff8800299ff9e8 ffff88025b326780 ffff8804= 1fc83de8 [ 196.921788] ffffffff81438429 00000000fffffffb ffff8803d36e6c00 00000000= 00000000 [ 196.921788] ffff88041fc83e10 ffffffff811ef063 ffff8802bae0a1e8 ffff8802= bae0a1e8 [ 196.921788] Call Trace: [ 196.921788] =20 [ 196.921788] [] btrfs_end_bio+0x116/0x11d [ 196.921788] [] bio_endio+0x63/0x6a [ 196.921788] [] blk_mq_complete_request+0x89/0xfe [ 196.921788] [] __blk_mq_end_io+0x16/0x18 [ 196.921788] [] blk_mq_end_io+0x20/0xb1 [ 196.921788] [] virtblk_done+0xa4/0xf6 [ 196.921788] [] vring_interrupt+0x7c/0x8a [ 196.921788] [] handle_irq_event_percpu+0x4a/0x1bc [ 196.921788] [] handle_irq_event+0x45/0x61 [ 196.921788] [] handle_edge_irq+0xd9/0xfb [ 196.921788] [] handle_irq+0x21/0x2a [ 196.921788] [] do_IRQ+0x4d/0xb4 [ 196.921788] [] common_interrupt+0x72/0x72 [ 196.921788] =20 [ 196.921788] [] ? native_safe_halt+0x6/0x8 [ 196.921788] [] default_idle+0x38/0xc1 [ 196.921788] [] arch_cpu_idle+0x18/0x28 [ 196.921788] [] cpu_startup_entry+0x178/0x269 [ 196.921788] [] ? clockevents_register_device+0x112/0x= 117 [ 196.921788] [] start_secondary+0x277/0x279 [ 196.921788] Code: ff ff eb bb 5b 41 5c 41 5d 41 5e 5d c3 0f 1f 44 00 00 = 55 48 89 e5 41 54 53 53 bb fb ff ff ff 48 85 ff 74 4c 8b 47 44 85 c0 7f 02 = <0f> 0b 85 f6 74 07 f0 80 67 10 fe eb 09 48 8b 47 10 a8 01 0f 44=20 [ 196.921788] RIP [] bio_endio+0x1e/0x6a [ 196.921788] RSP [ 196.921788] ---[ end trace 0ec0fc28f7931a30 ]--- [ 196.921788] Kernel panic - not syncing: Fatal exception in interrupt [ 196.921788] Rebooting in 10 seconds.. Elapsed time: 210 numactl --preferred=3D0 --physcpubind=3D4-7 qemu-system-x86_64 -cpu kvm64 -= enable-kvm -kernel /kernel/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f= 6ec/vmlinuz-3.13.0-rc6-01897-g2b48961 -append 'user=3Dlkp job=3D/lkp/schedu= led/kbuildx-1/cyclic_fileio-600s-100%-1HDD-btrfs-64G-1024-rndrw-sync-HEAD.y= aml ARCH=3Dx86_64 BOOT_IMAGE=3D/kernel/x86_64-lkp/2b48961067b059a9260e0378c= d4d83a0c959f6ec/vmlinuz-3.13.0-rc6-01897-g2b48961 kconfig=3Dx86_64-lkp comm= it=3D2b48961067b059a9260e0378cd4d83a0c959f6ec modules_initrd=3D/kernel/x86_= 64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/modules.cgz max_uptime=3D38= 03 RESULT_ROOT=3D/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-btrfs-6= 4G-1024-rndrw-sync/x86_64-lkp/2b48961067b059a9260e0378cd4d83a0c959f6ec/0 in= itrd=3D/kernel-tests/initrd/lkp-rootfs.cgz root=3D/dev/ram0 ip=3D::::kbuild= x-1::dhcp oops=3Dpanic earlyprintk=3DttyS0,115200 debug apic=3Ddebug sysrq_= always_enabled panic=3D10 load_ramdisk=3D2 prompt_ramdisk=3D0 console=3Dtty= S0,115200 console=3Dtty0 vga=3Dnormal' -initrd /fs/sda1/initrd-kbuildx-1 -= m 16G -smp 4 -net nic,vlan=3D1,model=3De1000 -net user,vlan=3D1,hostfwd=3Dt= cp::9556-:22 -boot order=3Dnc -no-reboot -watchdog i6300esb -rtc base=3Dloc= altime -drive file=3D/fs/sda1/disk0-kbuildx-1,media=3Ddisk,if=3Dvirtio -dri= ve file=3D/fs/sda1/disk1-kbuildx-1,media=3Ddisk,if=3Dvirtio -drive file=3D/= fs/sda1/disk2-kbuildx-1,media=3Ddisk,if=3Dvirtio -drive file=3D/fs/sda1/dis= k3-kbuildx-1,media=3Ddisk,if=3Dvirtio -drive file=3D/fs/sda1/disk4-kbuildx-= 1,media=3Ddisk,if=3Dvirtio -drive file=3D/fs/sda1/disk5-kbuildx-1,media=3Dd= isk,if=3Dvirtio -pidfile /dev/shm/kboot/pid-kbuildx-1 -serial file:/dev/shm= /kboot/serial-kbuildx-1 -daemonize -display none -monitor null=20 --5mCyUwZo2JvN/JJP-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/