Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755301AbaAHF4z (ORCPT ); Wed, 8 Jan 2014 00:56:55 -0500 Received: from nasmtp02.atmel.com ([204.2.163.16]:31732 "EHLO SJOEDG01.corp.atmel.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754901AbaAHF4f (ORCPT ); Wed, 8 Jan 2014 00:56:35 -0500 X-Greylist: delayed 311 seconds by postgrey-1.27 at vger.kernel.org; Wed, 08 Jan 2014 00:56:34 EST From: Wenyou Yang To: CC: , , , , , Subject: [PATCH] spi: atmel: Refactor spi-atmel to use SPI framework queue Date: Wed, 8 Jan 2014 13:49:48 +0800 Message-ID: <1389160188-4030-1-git-send-email-wenyou.yang@atmel.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Replace the deprecated master->transfer with transfer_one_message() and allow the SPI subsystem handle all the queuing of messages. Signed-off-by: Wenyou Yang --- Hi Mark, The patch is based on for-next branch of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git It is tested on sama5d3xek and at91sam9m10g45ek board. Best Regards, Wenyou Yang drivers/spi/spi-atmel.c | 681 +++++++++++++++-------------------------------- 1 file changed, 220 insertions(+), 461 deletions(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 57fa738..2a8c1d0 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -189,6 +189,8 @@ */ #define DMA_MIN_BYTES 16 +#define SPI_DMA_TIMEOUT (msecs_to_jiffies(1000)) + struct atmel_spi_dma { struct dma_chan *chan_rx; struct dma_chan *chan_tx; @@ -220,17 +222,14 @@ struct atmel_spi { int irq; struct clk *clk; struct platform_device *pdev; - struct spi_device *stay; u8 stopping; - struct list_head queue; - struct tasklet_struct tasklet; struct spi_transfer *current_transfer; unsigned long current_remaining_bytes; - struct spi_transfer *next_transfer; - unsigned long next_remaining_bytes; int done_status; + struct completion xfer_completion; + /* scratch buffer */ void *buffer; dma_addr_t buffer_dma; @@ -376,17 +375,6 @@ static inline bool atmel_spi_use_dma(struct atmel_spi *as, return as->use_dma && xfer->len >= DMA_MIN_BYTES; } -static inline int atmel_spi_xfer_is_last(struct spi_message *msg, - struct spi_transfer *xfer) -{ - return msg->transfers.prev == &xfer->transfer_list; -} - -static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer) -{ - return xfer->delay_usecs == 0 && !xfer->cs_change; -} - static int atmel_spi_dma_slave_config(struct atmel_spi *as, struct dma_slave_config *slave_config, u8 bits_per_word) @@ -507,29 +495,28 @@ static void atmel_spi_release_dma(struct atmel_spi *as) dma_release_channel(as->dma.chan_tx); } -/* This function is called by the DMA driver from tasklet context */ +/* This function is called by the DMA driver */ static void dma_callback(void *data) { struct spi_master *master = data; struct atmel_spi *as = spi_master_get_devdata(master); - /* trigger SPI tasklet */ - tasklet_schedule(&as->tasklet); + atmel_spi_lock(as); + complete(&as->xfer_completion); + atmel_spi_unlock(as); } /* * Next transfer using PIO. - * lock is held, spi tasklet is blocked */ static void atmel_spi_next_xfer_pio(struct spi_master *master, struct spi_transfer *xfer) { struct atmel_spi *as = spi_master_get_devdata(master); + unsigned long xfer_pos = xfer->len - as->current_remaining_bytes; dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_pio\n"); - as->current_remaining_bytes = xfer->len; - /* Make sure data is not remaining in RDR */ spi_readl(as, RDR); while (spi_readl(as, SR) & SPI_BIT(RDRF)) { @@ -537,13 +524,14 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master, cpu_relax(); } - if (xfer->tx_buf) + if (xfer->tx_buf) { if (xfer->bits_per_word > 8) - spi_writel(as, TDR, *(u16 *)(xfer->tx_buf)); + spi_writel(as, TDR, *(u16 *)(xfer->tx_buf + xfer_pos)); else - spi_writel(as, TDR, *(u8 *)(xfer->tx_buf)); - else + spi_writel(as, TDR, *(u8 *)(xfer->tx_buf + xfer_pos)); + } else { spi_writel(as, TDR, 0); + } dev_dbg(master->dev.parent, " start pio xfer %p: len %u tx %p rx %p bitpw %d\n", @@ -556,7 +544,6 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master, /* * Submit next transfer for DMA. - * lock is held, spi tasklet is blocked */ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master, struct spi_transfer *xfer, @@ -696,72 +683,39 @@ static void atmel_spi_next_xfer_data(struct spi_master *master, /* * Submit next transfer for PDC. - * lock is held, spi irq is blocked */ static void atmel_spi_pdc_next_xfer(struct spi_master *master, - struct spi_message *msg) + struct spi_message *msg, + struct spi_transfer *xfer) { struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_transfer *xfer; - u32 len, remaining; - u32 ieval; + u32 len; dma_addr_t tx_dma, rx_dma; - if (!as->current_transfer) - xfer = list_entry(msg->transfers.next, - struct spi_transfer, transfer_list); - else if (!as->next_transfer) - xfer = list_entry(as->current_transfer->transfer_list.next, - struct spi_transfer, transfer_list); - else - xfer = NULL; + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - if (xfer) { - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + len = as->current_remaining_bytes; + atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); + as->current_remaining_bytes -= len; - len = xfer->len; - atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); - remaining = xfer->len - len; + spi_writel(as, RPR, rx_dma); + spi_writel(as, TPR, tx_dma); - spi_writel(as, RPR, rx_dma); - spi_writel(as, TPR, tx_dma); + if (msg->spi->bits_per_word > 8) + len >>= 1; + spi_writel(as, RCR, len); + spi_writel(as, TCR, len); - if (msg->spi->bits_per_word > 8) - len >>= 1; - spi_writel(as, RCR, len); - spi_writel(as, TCR, len); - - dev_dbg(&msg->spi->dev, - " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n", - xfer, xfer->len, xfer->tx_buf, - (unsigned long long)xfer->tx_dma, xfer->rx_buf, - (unsigned long long)xfer->rx_dma); - } else { - xfer = as->next_transfer; - remaining = as->next_remaining_bytes; - } - - as->current_transfer = xfer; - as->current_remaining_bytes = remaining; - - if (remaining > 0) - len = remaining; - else if (!atmel_spi_xfer_is_last(msg, xfer) - && atmel_spi_xfer_can_be_chained(xfer)) { - xfer = list_entry(xfer->transfer_list.next, - struct spi_transfer, transfer_list); - len = xfer->len; - } else - xfer = NULL; + dev_dbg(&msg->spi->dev, + " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n", + xfer, xfer->len, xfer->tx_buf, + (unsigned long long)xfer->tx_dma, xfer->rx_buf, + (unsigned long long)xfer->rx_dma); - as->next_transfer = xfer; - - if (xfer) { - u32 total; - - total = len; + if (as->current_remaining_bytes) { + len = as->current_remaining_bytes; atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); - as->next_remaining_bytes = total - len; + as->current_remaining_bytes -= len; spi_writel(as, RNPR, rx_dma); spi_writel(as, TNPR, tx_dma); @@ -776,11 +730,6 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master, xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma, xfer->rx_buf, (unsigned long long)xfer->rx_dma); - ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES); - } else { - spi_writel(as, RNCR, 0); - spi_writel(as, TNCR, 0); - ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES); } /* REVISIT: We're waiting for ENDRX before we start the next @@ -793,83 +742,11 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master, * * It should be doable, though. Just not now... */ - spi_writel(as, IER, ieval); + spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES)); spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } /* - * Choose way to submit next transfer and start it. - * lock is held, spi tasklet is blocked - */ -static void atmel_spi_dma_next_xfer(struct spi_master *master, - struct spi_message *msg) -{ - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_transfer *xfer; - u32 remaining, len; - - remaining = as->current_remaining_bytes; - if (remaining) { - xfer = as->current_transfer; - len = remaining; - } else { - if (!as->current_transfer) - xfer = list_entry(msg->transfers.next, - struct spi_transfer, transfer_list); - else - xfer = list_entry( - as->current_transfer->transfer_list.next, - struct spi_transfer, transfer_list); - - as->current_transfer = xfer; - len = xfer->len; - } - - if (atmel_spi_use_dma(as, xfer)) { - u32 total = len; - if (!atmel_spi_next_xfer_dma_submit(master, xfer, &len)) { - as->current_remaining_bytes = total - len; - return; - } else { - dev_err(&msg->spi->dev, "unable to use DMA, fallback to PIO\n"); - } - } - - /* use PIO if error appened using DMA */ - atmel_spi_next_xfer_pio(master, xfer); -} - -static void atmel_spi_next_message(struct spi_master *master) -{ - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_device *spi; - - BUG_ON(as->current_transfer); - - msg = list_entry(as->queue.next, struct spi_message, queue); - spi = msg->spi; - - dev_dbg(master->dev.parent, "start message %p for %s\n", - msg, dev_name(&spi->dev)); - - /* select chip if it's not still active */ - if (as->stay) { - if (as->stay != spi) { - cs_deactivate(as, as->stay); - cs_activate(as, spi); - } - as->stay = NULL; - } else - cs_activate(as, spi); - - if (as->use_pdc) - atmel_spi_pdc_next_xfer(master, msg); - else - atmel_spi_dma_next_xfer(master, msg); -} - -/* * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma: * - The buffer is either valid for CPU access, else NULL * - If the buffer is valid, so is its DMA address @@ -924,41 +801,7 @@ static void atmel_spi_disable_pdc_transfer(struct atmel_spi *as) spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); } -static void -atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, - struct spi_message *msg, int stay) -{ - if (!stay || as->done_status < 0) - cs_deactivate(as, msg->spi); - else - as->stay = msg->spi; - - list_del(&msg->queue); - msg->status = as->done_status; - - dev_dbg(master->dev.parent, - "xfer complete: %u bytes transferred\n", - msg->actual_length); - - atmel_spi_unlock(as); - msg->complete(msg->context); - atmel_spi_lock(as); - - as->current_transfer = NULL; - as->next_transfer = NULL; - as->done_status = 0; - - /* continue if needed */ - if (list_empty(&as->queue) || as->stopping) { - if (as->use_pdc) - atmel_spi_disable_pdc_transfer(as); - } else { - atmel_spi_next_message(master); - } -} - /* Called from IRQ - * lock is held * * Must update "current_remaining_bytes" to keep track of data * to transfer. @@ -966,9 +809,7 @@ atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, static void atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) { - u8 *txp; u8 *rxp; - u16 *txp16; u16 *rxp16; unsigned long xfer_pos = xfer->len - as->current_remaining_bytes; @@ -990,96 +831,12 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) } else { as->current_remaining_bytes--; } - - if (as->current_remaining_bytes) { - if (xfer->tx_buf) { - if (xfer->bits_per_word > 8) { - txp16 = (u16 *)(((u8 *)xfer->tx_buf) - + xfer_pos + 2); - spi_writel(as, TDR, *txp16); - } else { - txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1; - spi_writel(as, TDR, *txp); - } - } else { - spi_writel(as, TDR, 0); - } - } -} - -/* Tasklet - * Called from DMA callback + pio transfer and overrun IRQ. - */ -static void atmel_spi_tasklet_func(unsigned long data) -{ - struct spi_master *master = (struct spi_master *)data; - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_transfer *xfer; - - dev_vdbg(master->dev.parent, "atmel_spi_tasklet_func\n"); - - atmel_spi_lock(as); - - xfer = as->current_transfer; - - if (xfer == NULL) - /* already been there */ - goto tasklet_out; - - msg = list_entry(as->queue.next, struct spi_message, queue); - - if (as->current_remaining_bytes == 0) { - if (as->done_status < 0) { - /* error happened (overrun) */ - if (atmel_spi_use_dma(as, xfer)) - atmel_spi_stop_dma(as); - } else { - /* only update length if no error */ - msg->actual_length += xfer->len; - } - - if (atmel_spi_use_dma(as, xfer)) - if (!msg->is_dma_mapped) - atmel_spi_dma_unmap_xfer(master, xfer); - - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - if (atmel_spi_xfer_is_last(msg, xfer) || as->done_status < 0) { - /* report completed (or erroneous) message */ - atmel_spi_msg_done(master, as, msg, xfer->cs_change); - } else { - if (xfer->cs_change) { - cs_deactivate(as, msg->spi); - udelay(1); - cs_activate(as, msg->spi); - } - - /* - * Not done yet. Submit the next transfer. - * - * FIXME handle protocol options for xfer - */ - atmel_spi_dma_next_xfer(master, msg); - } - } else { - /* - * Keep going, we still have data to send in - * the current transfer. - */ - atmel_spi_dma_next_xfer(master, msg); - } - -tasklet_out: - atmel_spi_unlock(as); } /* Interrupt * * No need for locking in this Interrupt handler: done_status is the - * only information modified. What we need is the update of this field - * before tasklet runs. This is ensured by using barrier. + * only information modified. */ static irqreturn_t atmel_spi_pio_interrupt(int irq, void *dev_id) @@ -1107,8 +864,6 @@ atmel_spi_pio_interrupt(int irq, void *dev_id) * * We will also not process any remaning transfers in * the message. - * - * All actions are done in tasklet with done_status indication */ as->done_status = -EIO; smp_wmb(); @@ -1116,7 +871,9 @@ atmel_spi_pio_interrupt(int irq, void *dev_id) /* Clear any overrun happening while cleaning up */ spi_readl(as, SR); - tasklet_schedule(&as->tasklet); + atmel_spi_lock(as); + complete(&as->xfer_completion); + atmel_spi_unlock(as); } else if (pending & SPI_BIT(RDRF)) { atmel_spi_lock(as); @@ -1125,11 +882,10 @@ atmel_spi_pio_interrupt(int irq, void *dev_id) ret = IRQ_HANDLED; xfer = as->current_transfer; atmel_spi_pump_pio_data(as, xfer); - if (!as->current_remaining_bytes) { - /* no more data to xfer, kick tasklet */ + if (!as->current_remaining_bytes) spi_writel(as, IDR, pending); - tasklet_schedule(&as->tasklet); - } + + complete(&as->xfer_completion); } atmel_spi_unlock(as); @@ -1147,116 +903,37 @@ atmel_spi_pdc_interrupt(int irq, void *dev_id) { struct spi_master *master = dev_id; struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_transfer *xfer; u32 status, pending, imr; int ret = IRQ_NONE; - atmel_spi_lock(as); - - xfer = as->current_transfer; - msg = list_entry(as->queue.next, struct spi_message, queue); - imr = spi_readl(as, IMR); status = spi_readl(as, SR); pending = status & imr; if (pending & SPI_BIT(OVRES)) { - int timeout; - ret = IRQ_HANDLED; spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES))); - /* - * When we get an overrun, we disregard the current - * transfer. Data will not be copied back from any - * bounce buffer and msg->actual_len will not be - * updated with the last xfer. - * - * We will also not process any remaning transfers in - * the message. - * - * First, stop the transfer and unmap the DMA buffers. - */ - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - if (!msg->is_dma_mapped) - atmel_spi_dma_unmap_xfer(master, xfer); - - /* REVISIT: udelay in irq is unfriendly */ - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n", - spi_readl(as, TCR), spi_readl(as, RCR)); - - /* - * Clean up DMA registers and make sure the data - * registers are empty. - */ - spi_writel(as, RNCR, 0); - spi_writel(as, TNCR, 0); - spi_writel(as, RCR, 0); - spi_writel(as, TCR, 0); - for (timeout = 1000; timeout; timeout--) - if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) - break; - if (!timeout) - dev_warn(master->dev.parent, - "timeout waiting for TXEMPTY"); - while (spi_readl(as, SR) & SPI_BIT(RDRF)) - spi_readl(as, RDR); - /* Clear any overrun happening while cleaning up */ spi_readl(as, SR); + atmel_spi_lock(as); as->done_status = -EIO; - atmel_spi_msg_done(master, as, msg, 0); + complete(&as->xfer_completion); + atmel_spi_unlock(as); + } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) { ret = IRQ_HANDLED; spi_writel(as, IDR, pending); - if (as->current_remaining_bytes == 0) { - msg->actual_length += xfer->len; - - if (!msg->is_dma_mapped) - atmel_spi_dma_unmap_xfer(master, xfer); - - /* REVISIT: udelay in irq is unfriendly */ - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - if (atmel_spi_xfer_is_last(msg, xfer)) { - /* report completed message */ - atmel_spi_msg_done(master, as, msg, - xfer->cs_change); - } else { - if (xfer->cs_change) { - cs_deactivate(as, msg->spi); - udelay(1); - cs_activate(as, msg->spi); - } - - /* - * Not done yet. Submit the next transfer. - * - * FIXME handle protocol options for xfer - */ - atmel_spi_pdc_next_xfer(master, msg); - } - } else { - /* - * Keep going, we still have data to send in - * the current transfer. - */ - atmel_spi_pdc_next_xfer(master, msg); - } + atmel_spi_lock(as); + complete(&as->xfer_completion); + atmel_spi_unlock(as); } - atmel_spi_unlock(as); - return ret; } @@ -1352,12 +1029,6 @@ static int atmel_spi_setup(struct spi_device *spi) asd->npcs_pin = npcs_pin; spi->controller_state = asd; gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH)); - } else { - atmel_spi_lock(as); - if (as->stay == spi) - as->stay = NULL; - cs_deactivate(as, spi); - atmel_spi_unlock(as); } asd->csr = csr; @@ -1372,103 +1043,211 @@ static int atmel_spi_setup(struct spi_device *spi) return 0; } -static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) +static int atmel_spi_one_transfer(struct spi_master *master, + struct spi_message *msg, + struct spi_transfer *xfer) { - struct atmel_spi *as; - struct spi_transfer *xfer; - struct device *controller = spi->master->dev.parent; + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_device *spi = msg->spi; u8 bits; + u32 len; struct atmel_spi_device *asd; + int timeout; + int ret; - as = spi_master_get_devdata(spi->master); - - dev_dbg(controller, "new message %p submitted for %s\n", - msg, dev_name(&spi->dev)); - - if (unlikely(list_empty(&msg->transfers))) + if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { + dev_dbg(&spi->dev, "missing rx or tx buf\n"); return -EINVAL; + } - if (as->stopping) - return -ESHUTDOWN; + if (xfer->bits_per_word) { + asd = spi->controller_state; + bits = (asd->csr >> 4) & 0xf; + if (bits != xfer->bits_per_word - 8) { + dev_dbg(&spi->dev, + "you can't yet change bits_per_word in transfers\n"); + return -ENOPROTOOPT; + } + } - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { - dev_dbg(&spi->dev, "missing rx or tx buf\n"); + if (xfer->bits_per_word > 8) { + if (xfer->len % 2) { + dev_dbg(&spi->dev, + "buffer len should be 16 bits aligned\n"); return -EINVAL; } + } - if (xfer->bits_per_word) { - asd = spi->controller_state; - bits = (asd->csr >> 4) & 0xf; - if (bits != xfer->bits_per_word - 8) { - dev_dbg(&spi->dev, - "you can't yet change bits_per_word in transfers\n"); - return -ENOPROTOOPT; - } - } + /* FIXME implement these protocol options!! */ + if (xfer->speed_hz < spi->max_speed_hz) { + dev_dbg(&spi->dev, "can't change speed in transfer\n"); + return -ENOPROTOOPT; + } - if (xfer->bits_per_word > 8) { - if (xfer->len % 2) { - dev_dbg(&spi->dev, "buffer len should be 16 bits aligned\n"); - return -EINVAL; + /* + * DMA map early, for performance (empties dcache ASAP) and + * better fault reporting. + */ + if ((!msg->is_dma_mapped) + && (atmel_spi_use_dma(as, xfer) || as->use_pdc)) { + if (atmel_spi_dma_map_xfer(as, xfer) < 0) + return -ENOMEM; + } + + as->done_status = 0; + as->current_transfer = xfer; + as->current_remaining_bytes = xfer->len; + while (as->current_remaining_bytes) { + reinit_completion(&as->xfer_completion); + + if (as->use_pdc) { + atmel_spi_pdc_next_xfer(master, msg, xfer); + } else if (atmel_spi_use_dma(as, xfer)) { + len = as->current_remaining_bytes; + ret = atmel_spi_next_xfer_dma_submit(master, + xfer, &len); + if (ret) { + dev_err(&spi->dev, + "unable to use DMA, fallback to PIO\n"); + atmel_spi_next_xfer_pio(master, xfer); + } else { + as->current_remaining_bytes -= len; } + } else { + atmel_spi_next_xfer_pio(master, xfer); } - /* FIXME implement these protocol options!! */ - if (xfer->speed_hz < spi->max_speed_hz) { - dev_dbg(&spi->dev, "can't change speed in transfer\n"); - return -ENOPROTOOPT; + ret = wait_for_completion_timeout(&as->xfer_completion, + SPI_DMA_TIMEOUT); + if (WARN_ON(ret == 0)) { + dev_err(&spi->dev, + "spi trasfer timeout, err %d\n", ret); + as->done_status = -EIO; + } else { + ret = 0; } - /* - * DMA map early, for performance (empties dcache ASAP) and - * better fault reporting. - */ - if ((!msg->is_dma_mapped) && (atmel_spi_use_dma(as, xfer) - || as->use_pdc)) { - if (atmel_spi_dma_map_xfer(as, xfer) < 0) - return -ENOMEM; + if (as->done_status) + break; + } + + if (as->done_status) { + if (as->use_pdc) { + dev_warn(master->dev.parent, + "overrun (%u/%u remaining)\n", + spi_readl(as, TCR), spi_readl(as, RCR)); + + /* + * Clean up DMA registers and make sure the data + * registers are empty. + */ + spi_writel(as, RNCR, 0); + spi_writel(as, TNCR, 0); + spi_writel(as, RCR, 0); + spi_writel(as, TCR, 0); + for (timeout = 1000; timeout; timeout--) + if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) + break; + if (!timeout) + dev_warn(master->dev.parent, + "timeout waiting for TXEMPTY"); + while (spi_readl(as, SR) & SPI_BIT(RDRF)) + spi_readl(as, RDR); + + /* Clear any overrun happening while cleaning up */ + spi_readl(as, SR); + + } else if (atmel_spi_use_dma(as, xfer)) { + atmel_spi_stop_dma(as); } + + if (!msg->is_dma_mapped + && (atmel_spi_use_dma(as, xfer) || as->use_pdc)) + atmel_spi_dma_unmap_xfer(master, xfer); + + return 0; + + } else { + /* only update length if no error */ + msg->actual_length += xfer->len; + } + + if (!msg->is_dma_mapped + && (atmel_spi_use_dma(as, xfer) || as->use_pdc)) + atmel_spi_dma_unmap_xfer(master, xfer); + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (xfer->cs_change) { + cs_deactivate(as, msg->spi); + udelay(1); + cs_activate(as, msg->spi); + } + + return 0; +} + +static int atmel_spi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) +{ + struct atmel_spi *as; + struct spi_transfer *xfer; + struct spi_device *spi = msg->spi; + int ret = 0; + + as = spi_master_get_devdata(master); + + dev_dbg(&spi->dev, "new message %p submitted for %s\n", + msg, dev_name(&spi->dev)); + + if (unlikely(list_empty(&msg->transfers))) + return -EINVAL; + + if (as->stopping) + return -ESHUTDOWN; + + atmel_spi_lock(as); + cs_activate(as, spi); + + msg->status = 0; + msg->actual_length = 0; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + ret = atmel_spi_one_transfer(master, msg, xfer); + if (ret) + goto msg_done; } -#ifdef VERBOSE + if (as->use_pdc) + atmel_spi_disable_pdc_transfer(as); + list_for_each_entry(xfer, &msg->transfers, transfer_list) { - dev_dbg(controller, + dev_dbg(&spi->dev, " xfer %p: len %u tx %p/%08x rx %p/%08x\n", xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, xfer->rx_buf, xfer->rx_dma); } -#endif - msg->status = -EINPROGRESS; - msg->actual_length = 0; - - atmel_spi_lock(as); - list_add_tail(&msg->queue, &as->queue); - if (!as->current_transfer) - atmel_spi_next_message(spi->master); +msg_done: + cs_deactivate(as, msg->spi); atmel_spi_unlock(as); - return 0; + msg->status = as->done_status; + spi_finalize_current_message(spi->master); + + return ret; } static void atmel_spi_cleanup(struct spi_device *spi) { - struct atmel_spi *as = spi_master_get_devdata(spi->master); struct atmel_spi_device *asd = spi->controller_state; unsigned gpio = (unsigned) spi->controller_data; if (!asd) return; - atmel_spi_lock(as); - if (as->stay == spi) { - as->stay = NULL; - cs_deactivate(as, spi); - } - atmel_spi_unlock(as); - spi->controller_state = NULL; gpio_free(gpio); kfree(asd); @@ -1527,7 +1306,7 @@ static int atmel_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = master->dev.of_node ? 0 : 4; master->setup = atmel_spi_setup; - master->transfer = atmel_spi_transfer; + master->transfer_one_message = atmel_spi_transfer_one_message; master->cleanup = atmel_spi_cleanup; platform_set_drvdata(pdev, master); @@ -1543,7 +1322,6 @@ static int atmel_spi_probe(struct platform_device *pdev) goto out_free; spin_lock_init(&as->lock); - INIT_LIST_HEAD(&as->queue); as->pdev = pdev; as->regs = devm_ioremap_resource(&pdev->dev, regs); @@ -1555,6 +1333,8 @@ static int atmel_spi_probe(struct platform_device *pdev) as->irq = irq; as->clk = clk; + init_completion(&as->xfer_completion); + atmel_get_caps(as); as->use_dma = false; @@ -1573,9 +1353,6 @@ static int atmel_spi_probe(struct platform_device *pdev) ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pdc_interrupt, 0, dev_name(&pdev->dev), master); } else { - tasklet_init(&as->tasklet, atmel_spi_tasklet_func, - (unsigned long)master); - ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pio_interrupt, 0, dev_name(&pdev->dev), master); } @@ -1619,8 +1396,6 @@ out_free_dma: out_free_irq: out_unmap_regs: out_free_buffer: - if (!as->use_pdc) - tasklet_kill(&as->tasklet); dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, as->buffer_dma); out_free: @@ -1632,8 +1407,6 @@ static int atmel_spi_remove(struct platform_device *pdev) { struct spi_master *master = platform_get_drvdata(pdev); struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_transfer *xfer; /* reset the hardware and block queue progress */ spin_lock_irq(&as->lock); @@ -1648,20 +1421,6 @@ static int atmel_spi_remove(struct platform_device *pdev) spi_readl(as, SR); spin_unlock_irq(&as->lock); - /* Terminate remaining queued transfers */ - list_for_each_entry(msg, &as->queue, queue) { - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if (!msg->is_dma_mapped - && (atmel_spi_use_dma(as, xfer) - || as->use_pdc)) - atmel_spi_dma_unmap_xfer(master, xfer); - } - msg->status = -ESHUTDOWN; - msg->complete(msg->context); - } - - if (!as->use_pdc) - tasklet_kill(&as->tasklet); dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, as->buffer_dma); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/