Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 3 Feb 2001 15:39:08 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 3 Feb 2001 15:38:58 -0500 Received: from mail.mbi-berlin.de ([194.95.11.12]:909 "EHLO mail.mbi-berlin.de") by vger.kernel.org with ESMTP id ; Sat, 3 Feb 2001 15:38:44 -0500 Message-ID: <3A7C6B82.6C567930@informatik.hu-berlin.de> Date: Sat, 03 Feb 2001 21:35:14 +0100 From: Viktor Rosenfeld X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.1 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org CC: Jeff Garzik Subject: Re: [BUG?] ISA-PnP and 3c509 NIC won't work together In-Reply-To: <3A7C45E4.15C470A3@informatik.hu-berlin.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Jeff Garzik wrote: > > Victor, > > Can you respond to your recently-sent linux-kernel e-mail, and provide > the output of 'dmesg' after all your experiments? 'dmesg' program > displays the kernel logging buffer, and should give us much additional > information. Of course, here it comes. BTW, ISA-PnP left out and 3c509 compiled as module won't do it either. I get the same error message about parm_io. As you can see, only when I have ISA-PnP left out and 3c509 compiled-in, the NIC is recognized. - Kernel 2.4.1 with ISA-PnP and 3c509 compiled-in: Linux version 2.4.1 (root@bart) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Sam Feb 3 19:41:16 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 000000000fef0000 @ 0000000000100000 (usable) BIOS-e820: 000000000000d000 @ 000000000fff3000 (ACPI data) BIOS-e820: 0000000000003000 @ 000000000fff0000 (ACPI NVS) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=linux ro root=802 mem=256M apm=on devfs=nomount Initializing CPU#0 Detected 333.351 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 665.19 BogoMIPS Memory: 255788k/262144k available (858k kernel code, 5968k reserved, 350k data, 188k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfaec0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 got res[10000000:13ffffff] for resource 0 of S3 Inc. 86c968 [Vision 968 VRAM] rev 0 Limiting direct PCI/PCI transfers. isapnp: Scanning for Pnp cards... isapnp: Card 'TERRATEC SOUNDSYSTEM BASE 1' isapnp: 1 Plug & Play card detected total Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 DMI 2.1 present. 30 structures occupying 806 bytes. DMI table at 0x000F0800. BIOS Vendor: Award Software International, Inc. BIOS Version: 4.51 PG BIOS Release: 01/25/99 Board Vendor: Gigabyte Technology Co. Ltd.. Board Name: i440BX-W977. Board Version: . apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169928kB/56642kB, 512 slots per queue Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 11, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875E detected sym53c875E-0: rev 0x26 on pci bus 0 device 11 function 0 irq 11 sym53c875E-0: ID 7, Fast-20, Parity Checking sym53c875E-0: on-chip RAM at 0xed000000 sym53c875E-0: restart (scsi reset). sym53c875E-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx - version 1.6b Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Vendor: IBM Model: DNES-309170W Rev: SAH0 Type: Direct-Access ANSI SCSI revision: 03 sym53c875E-0-<8,0>: tagged command queue depth set to 8 Detected scsi disk sda at scsi0, channel 0, id 8, lun 0 sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<8,0>: sync msg in: 1-3-1-c-10. sym53c875E-0-<8,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=16 fak=0 chg=0. sym53c875E-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) Partition check: /dev/scsi/host0/bus0/target8/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 11 for device 00:07.2 PCI: The same IRQ used for device 00:0b.0 uhci.c: USB UHCI at I/O 0xe000, IRQ 11 uhci.c: detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 188k freed Adding Swap: 263144k swap-space (priority -1) Real Time Clock Driver v1.10d - Kernel 2.4.1 with ISA-PnP compiled-in and 3c509 compiled as module: Linux version 2.4.1 (root@bart) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Sam Feb 3 20:00:58 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 000000000fef0000 @ 0000000000100000 (usable) BIOS-e820: 000000000000d000 @ 000000000fff3000 (ACPI data) BIOS-e820: 0000000000003000 @ 000000000fff0000 (ACPI NVS) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=802 mem=256M apm=on devfs=nomount Initializing CPU#0 Detected 333.352 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 665.19 BogoMIPS Memory: 255796k/262144k available (853k kernel code, 5960k reserved, 348k data, 188k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfaec0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 got res[10000000:13ffffff] for resource 0 of S3 Inc. 86c968 [Vision 968 VRAM] rev 0 Limiting direct PCI/PCI transfers. isapnp: Scanning for Pnp cards... isapnp: Card 'TERRATEC SOUNDSYSTEM BASE 1' isapnp: 1 Plug & Play card detected total Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 DMI 2.1 present. 30 structures occupying 806 bytes. DMI table at 0x000F0800. BIOS Vendor: Award Software International, Inc. BIOS Version: 4.51 PG BIOS Release: 01/25/99 Board Vendor: Gigabyte Technology Co. Ltd.. Board Name: i440BX-W977. Board Version: . apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169933kB/56644kB, 512 slots per queue Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 11, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875E detected sym53c875E-0: rev 0x26 on pci bus 0 device 11 function 0 irq 11 sym53c875E-0: ID 7, Fast-20, Parity Checking sym53c875E-0: on-chip RAM at 0xed000000 sym53c875E-0: restart (scsi reset). sym53c875E-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx - version 1.6b Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Vendor: IBM Model: DNES-309170W Rev: SAH0 Type: Direct-Access ANSI SCSI revision: 03 sym53c875E-0-<8,0>: tagged command queue depth set to 8 Detected scsi disk sda at scsi0, channel 0, id 8, lun 0 sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<8,0>: sync msg in: 1-3-1-c-10. sym53c875E-0-<8,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=16 fak=0 chg=0. sym53c875E-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) Partition check: /dev/scsi/host0/bus0/target8/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 11 for device 00:07.2 PCI: The same IRQ used for device 00:0b.0 uhci.c: USB UHCI at I/O 0xe000, IRQ 11 uhci.c: detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 188k freed Adding Swap: 263144k swap-space (priority -1) Real Time Clock Driver v1.10d (after `modprobe 3c509`) nothing (error message) - Kernel 2.4.1 with ISA-PnP and 3c509 compiled as modules: Linux version 2.4.1 (root@bart) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Sam Feb 3 20:19:11 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 000000000fef0000 @ 0000000000100000 (usable) BIOS-e820: 000000000000d000 @ 000000000fff3000 (ACPI data) BIOS-e820: 0000000000003000 @ 000000000fff0000 (ACPI NVS) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=802 mem=256M apm=on devfs=nomount Initializing CPU#0 Detected 333.351 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 665.19 BogoMIPS Memory: 255824k/262144k available (838k kernel code, 5932k reserved, 343k data, 184k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfaec0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 got res[10000000:13ffffff] for resource 0 of S3 Inc. 86c968 [Vision 968 VRAM] rev 0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 DMI 2.1 present. 30 structures occupying 806 bytes. DMI table at 0x000F0800. BIOS Vendor: Award Software International, Inc. BIOS Version: 4.51 PG BIOS Release: 01/25/99 Board Vendor: Gigabyte Technology Co. Ltd.. Board Name: i440BX-W977. Board Version: . apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169957kB/56652kB, 512 slots per queue Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 11, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875E detected sym53c875E-0: rev 0x26 on pci bus 0 device 11 function 0 irq 11 sym53c875E-0: ID 7, Fast-20, Parity Checking sym53c875E-0: on-chip RAM at 0xed000000 sym53c875E-0: restart (scsi reset). sym53c875E-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx - version 1.6b Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Vendor: IBM Model: DNES-309170W Rev: SAH0 Type: Direct-Access ANSI SCSI revision: 03 sym53c875E-0-<8,0>: tagged command queue depth set to 8 Detected scsi disk sda at scsi0, channel 0, id 8, lun 0 sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<8,0>: sync msg in: 1-3-1-c-10. sym53c875E-0-<8,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=16 fak=0 chg=0. sym53c875E-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) Partition check: /dev/scsi/host0/bus0/target8/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 11 for device 00:07.2 PCI: The same IRQ used for device 00:0b.0 uhci.c: USB UHCI at I/O 0xe000, IRQ 11 uhci.c: detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 184k freed Adding Swap: 263144k swap-space (priority -1) Real Time Clock Driver v1.10d (after `insmod /lib/modules/2.4.1/.../3c509.o`) nothing (error message) (after `modprobe 3c509`) isapnp: Scanning for Pnp cards... isapnp: Card 'TERRATEC SOUNDSYSTEM BASE 1' isapnp: 1 Plug & Play card detected total plus error message - Kernel 2.4.1 with ISA-PnP left out and 3c509 compiled as module: Linux version 2.4.1 (root@bart) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Sam Feb 3 20:33:57 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 000000000fef0000 @ 0000000000100000 (usable) BIOS-e820: 000000000000d000 @ 000000000fff3000 (ACPI data) BIOS-e820: 0000000000003000 @ 000000000fff0000 (ACPI NVS) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=802 mem=256M apm=on devfs=nomount Initializing CPU#0 Detected 333.351 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 665.19 BogoMIPS Memory: 255824k/262144k available (838k kernel code, 5932k reserved, 343k data, 184k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfaec0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 got res[10000000:13ffffff] for resource 0 of S3 Inc. 86c968 [Vision 968 VRAM] rev 0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 DMI 2.1 present. 30 structures occupying 806 bytes. DMI table at 0x000F0800. BIOS Vendor: Award Software International, Inc. BIOS Version: 4.51 PG BIOS Release: 01/25/99 Board Vendor: Gigabyte Technology Co. Ltd.. Board Name: i440BX-W977. Board Version: . apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169957kB/56652kB, 512 slots per queue Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 11, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875E detected sym53c875E-0: rev 0x26 on pci bus 0 device 11 function 0 irq 11 sym53c875E-0: ID 7, Fast-20, Parity Checking sym53c875E-0: on-chip RAM at 0xed000000 sym53c875E-0: restart (scsi reset). sym53c875E-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx - version 1.6b Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Vendor: IBM Model: DNES-309170W Rev: SAH0 Type: Direct-Access ANSI SCSI revision: 03 sym53c875E-0-<8,0>: tagged command queue depth set to 8 Detected scsi disk sda at scsi0, channel 0, id 8, lun 0 sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<8,0>: sync msg in: 1-3-1-c-10. sym53c875E-0-<8,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=16 fak=0 chg=0. sym53c875E-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) Partition check: /dev/scsi/host0/bus0/target8/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 11 for device 00:07.2 PCI: The same IRQ used for device 00:0b.0 uhci.c: USB UHCI at I/O 0xe000, IRQ 11 uhci.c: detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 184k freed Adding Swap: 263144k swap-space (priority -1) Real Time Clock Driver v1.10d (after modprobe 3c509) nothing - Kernel 2.4.1 with ISA-PnP left out and 3c509 compiled-in: Linux version 2.4.1 (root@bart) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Sam Feb 3 21:13:46 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 000000000fef0000 @ 0000000000100000 (usable) BIOS-e820: 000000000000d000 @ 000000000fff3000 (ACPI data) BIOS-e820: 0000000000003000 @ 000000000fff0000 (ACPI NVS) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=802 mem=256M apm=on devfs=nomount Initializing CPU#0 Detected 333.351 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 665.19 BogoMIPS Memory: 255816k/262144k available (841k kernel code, 5940k reserved, 344k data, 184k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfaec0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 got res[10000000:13ffffff] for resource 0 of S3 Inc. 86c968 [Vision 968 VRAM] rev 0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 DMI 2.1 present. 30 structures occupying 806 bytes. DMI table at 0x000F0800. BIOS Vendor: Award Software International, Inc. BIOS Version: 4.51 PG BIOS Release: 01/25/99 Board Vendor: Gigabyte Technology Co. Ltd.. Board Name: i440BX-W977. Board Version: . apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169952kB/56650kB, 512 slots per queue Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 eth0: 3c509 at 0x210, BNC port, address 00 60 8c c1 da da, IRQ 3. 3c509.c:1.16 (2.2) 2/3/98 becker@cesdis.gsfc.nasa.gov. Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 11, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875E detected sym53c875E-0: rev 0x26 on pci bus 0 device 11 function 0 irq 11 sym53c875E-0: ID 7, Fast-20, Parity Checking sym53c875E-0: on-chip RAM at 0xed000000 sym53c875E-0: restart (scsi reset). sym53c875E-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx - version 1.6b Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Vendor: IBM Model: DNES-309170W Rev: SAH0 Type: Direct-Access ANSI SCSI revision: 03 sym53c875E-0-<8,0>: tagged command queue depth set to 8 Detected scsi disk sda at scsi0, channel 0, id 8, lun 0 sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: wide msgout: 1-2-3-1. sym53c875E-0-<8,0>: wide msgin: 1-2-3-1. sym53c875E-0-<8,0>: wide: wide=1 chg=0. sym53c875E-0-<8,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<8,0>: sync msg in: 1-3-1-c-10. sym53c875E-0-<8,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=16 fak=0 chg=0. sym53c875E-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) Partition check: /dev/scsi/host0/bus0/target8/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875E-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875E-0-<1,0>: sync msg in: 1-3-1-c-f. sym53c875E-0-<1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 11 for device 00:07.2 PCI: The same IRQ used for device 00:0b.0 uhci.c: USB UHCI at I/O 0xe000, IRQ 11 uhci.c: detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 184k freed Adding Swap: 263144k swap-space (priority -1) eth0: Setting Rx mode to 1 addresses. Real Time Clock Driver v1.10d HTH, Viktor -- Viktor Rosenfeld WWW: http://www.informatik.hu-berlin.de/~rosenfel/ Geek Code (3.1): GCS/SS d-@ s+: a20 C++@ UL++$ P+ L+++ E--- W++ N++ o? K? !W O? M? V? PS++@ PE+(-) Y+ P?(+++) t+ 5+ X- R? !tv b+ DI+ D- G e>+++ h-- r- !y+ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/