Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751906AbaAMKqY (ORCPT ); Mon, 13 Jan 2014 05:46:24 -0500 Received: from bear.ext.ti.com ([192.94.94.41]:58243 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751377AbaAMKqU (ORCPT ); Mon, 13 Jan 2014 05:46:20 -0500 Message-ID: <52D3C3EB.6000104@ti.com> Date: Mon, 13 Jan 2014 16:16:03 +0530 From: Archit Taneja User-Agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.1.1 MIME-Version: 1.0 To: Ivaylo Dimitrov , CC: , , , , , , Ivaylo Dimitrov Subject: Re: [PATCH] OMAPDSS: DISPC: Fix 34xx overlay scaling calculation References: <1389444125-5000-1-git-send-email-ivo.g.dimitrov.75@gmail.com> In-Reply-To: <1389444125-5000-1-git-send-email-ivo.g.dimitrov.75@gmail.com> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit X-Originating-IP: [172.24.145.166] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, On Saturday 11 January 2014 06:12 PM, Ivaylo Dimitrov wrote: > From: Ivaylo Dimitrov > > commit 7faa92339bbb1e6b9a80983b206642517327eb75 OMAPDSS: DISPC: Handle > synclost errors in OMAP3 introduces limits check to prevent SYNCLOST errors > on OMAP3. However, it misses the logic found in Nokia kernels that is > needed to correctly calculate whether 3 tap or 5 tap rescaler to be used as > well as the logic to fallback to 3 taps if 5 taps clock results in too > tight horizontal timings. Without that patch "horizontal timing too tight" > errors are seen when a video with resolution above 640x350 is tried to be > played. The patch is a forward-ported logic found in Nokia N900 and N9/50 > kernels. > > Signed-off-by: Ivaylo Dimitrov > --- > drivers/video/omap2/dss/dispc.c | 36 +++++++++++++++++++++++++----------- > 1 files changed, 25 insertions(+), 11 deletions(-) > > diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c > index 67e413e..9d1aa25 100644 > --- a/drivers/video/omap2/dss/dispc.c > +++ b/drivers/video/omap2/dss/dispc.c > @@ -1999,7 +1999,8 @@ static void calc_tiler_rotation_offset(u16 screen_width, u16 width, > */ > static int check_horiz_timing_omap3(unsigned long pclk, unsigned long lclk, > const struct omap_video_timings *t, u16 pos_x, > - u16 width, u16 height, u16 out_width, u16 out_height) > + u16 width, u16 height, u16 out_width, u16 out_height, > + bool five_taps) > { > const int ds = DIV_ROUND_UP(height, out_height); > unsigned long nonactive; > @@ -2019,6 +2020,10 @@ static int check_horiz_timing_omap3(unsigned long pclk, unsigned long lclk, > if (blank <= limits[i]) > return -EINVAL; > > + /* FIXME add checks for 3-tap filter once the limitations are known */ > + if (!five_taps) > + return 0; > + > /* > * Pixel data should be prepared before visible display point starts. > * So, atleast DS-2 lines must have already been fetched by DISPC > @@ -2191,24 +2196,33 @@ static int dispc_ovl_calc_scaling_34xx(unsigned long pclk, unsigned long lclk, > const int maxsinglelinewidth = > dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH); > > + *five_taps = height > out_height; > + We should consider the decimated height when calculating the five taps. I suggest the change below: > do { > in_height = DIV_ROUND_UP(height, *decim_y); > in_width = DIV_ROUND_UP(width, *decim_x); > - *core_clk = calc_core_clk_five_taps(pclk, mgr_timings, > - in_width, in_height, out_width, out_height, color_mode); > - > - error = check_horiz_timing_omap3(pclk, lclk, mgr_timings, > - pos_x, in_width, in_height, out_width, > - out_height); > set "*five_taps = in_height > out_height;" here. The rest of the code remains the same. > if (in_width > maxsinglelinewidth) > if (in_height > out_height && > in_height < out_height * 2) > *five_taps = false; > - if (!*five_taps) > +again: > + if (*five_taps) > + *core_clk = calc_core_clk_five_taps(pclk, mgr_timings, > + in_width, in_height, out_width, > + out_height, color_mode); > + else > *core_clk = dispc.feat->calc_core_clk(pclk, in_width, > - in_height, out_width, out_height, > - mem_to_mem); > + in_height, out_width, out_height, > + mem_to_mem); > + > + error = check_horiz_timing_omap3(pclk, lclk, mgr_timings, > + pos_x, in_width, in_height, out_width, > + out_height, *five_taps); > + if (error && *five_taps) { > + *five_taps = false; > + goto again; > + } > > error = (error || in_width > maxsinglelinewidth * 2 || > (in_width > maxsinglelinewidth && *five_taps) || > @@ -2226,7 +2240,7 @@ static int dispc_ovl_calc_scaling_34xx(unsigned long pclk, unsigned long lclk, > } while (*decim_x <= *x_predecim && *decim_y <= *y_predecim && error); > > if (check_horiz_timing_omap3(pclk, lclk, mgr_timings, pos_x, width, > - height, out_width, out_height)){ > + height, out_width, out_height, *five_taps)) { > DSSERR("horizontal timing too tight\n"); > return -EINVAL; > } > Thanks, Archit -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/