Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754923AbaAMQeH (ORCPT ); Mon, 13 Jan 2014 11:34:07 -0500 Received: from mail-ea0-f170.google.com ([209.85.215.170]:57113 "EHLO mail-ea0-f170.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753078AbaAMQeA (ORCPT ); Mon, 13 Jan 2014 11:34:00 -0500 From: Ivaylo Dimitrov To: tomi.valkeinen@ti.com Cc: archit@ti.com, plagnioj@jcrosoft.com, pali.rohar@gmail.com, pavel@ucw.cz, linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, Ivaylo Dimitrov , Ivaylo Dimitrov Subject: [PATCH v2] OMAPDSS: DISPC: Fix 34xx overlay scaling calculation Date: Mon, 13 Jan 2014 18:33:02 +0200 Message-Id: <1389630782-1764-1-git-send-email-ivo.g.dimitrov.75@gmail.com> X-Mailer: git-send-email 1.8.4.msysgit.0 In-Reply-To: <52D3C3EB.6000104@ti.com> References: <52D3C3EB.6000104@ti.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Ivaylo Dimitrov commit 7faa92339bbb1e6b9a80983b206642517327eb75 OMAPDSS: DISPC: Handle synclost errors in OMAP3 introduces limits check to prevent SYNCLOST errors on OMAP3. However, it misses the logic found in Nokia kernels that is needed to correctly calculate whether 3 tap or 5 tap rescaler to be used as well as the logic to fallback to 3 taps if 5 taps clock results in too tight horizontal timings. Without that patch "horizontal timing too tight" errors are seen when a video with resolution above 640x350 is tried to be played. The patch is a forward-ported logic found in Nokia N900 and N9/50 kernels. Signed-off-by: Ivaylo Dimitrov --- drivers/video/omap2/dss/dispc.c | 31 ++++++++++++++++++++++--------- 1 files changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 67e413e..66e0849 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -1999,7 +1999,8 @@ static void calc_tiler_rotation_offset(u16 screen_width, u16 width, */ static int check_horiz_timing_omap3(unsigned long pclk, unsigned long lclk, const struct omap_video_timings *t, u16 pos_x, - u16 width, u16 height, u16 out_width, u16 out_height) + u16 width, u16 height, u16 out_width, u16 out_height, + bool five_taps) { const int ds = DIV_ROUND_UP(height, out_height); unsigned long nonactive; @@ -2019,6 +2020,10 @@ static int check_horiz_timing_omap3(unsigned long pclk, unsigned long lclk, if (blank <= limits[i]) return -EINVAL; + /* FIXME add checks for 3-tap filter once the limitations are known */ + if (!five_taps) + return 0; + /* * Pixel data should be prepared before visible display point starts. * So, atleast DS-2 lines must have already been fetched by DISPC @@ -2194,22 +2199,30 @@ static int dispc_ovl_calc_scaling_34xx(unsigned long pclk, unsigned long lclk, do { in_height = DIV_ROUND_UP(height, *decim_y); in_width = DIV_ROUND_UP(width, *decim_x); - *core_clk = calc_core_clk_five_taps(pclk, mgr_timings, - in_width, in_height, out_width, out_height, color_mode); - - error = check_horiz_timing_omap3(pclk, lclk, mgr_timings, - pos_x, in_width, in_height, out_width, - out_height); + *five_taps = in_height > out_height; if (in_width > maxsinglelinewidth) if (in_height > out_height && in_height < out_height * 2) *five_taps = false; - if (!*five_taps) +again: + if (*five_taps) + *core_clk = calc_core_clk_five_taps(pclk, mgr_timings, + in_width, in_height, out_width, + out_height, color_mode); + else *core_clk = dispc.feat->calc_core_clk(pclk, in_width, in_height, out_width, out_height, mem_to_mem); + error = check_horiz_timing_omap3(pclk, lclk, mgr_timings, + pos_x, in_width, in_height, out_width, + out_height, *five_taps); + if (error && *five_taps) { + *five_taps = false; + goto again; + } + error = (error || in_width > maxsinglelinewidth * 2 || (in_width > maxsinglelinewidth && *five_taps) || !*core_clk || *core_clk > dispc_core_clk_rate()); @@ -2226,7 +2239,7 @@ static int dispc_ovl_calc_scaling_34xx(unsigned long pclk, unsigned long lclk, } while (*decim_x <= *x_predecim && *decim_y <= *y_predecim && error); if (check_horiz_timing_omap3(pclk, lclk, mgr_timings, pos_x, width, - height, out_width, out_height)){ + height, out_width, out_height, *five_taps)) { DSSERR("horizontal timing too tight\n"); return -EINVAL; } -- 1.5.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/