Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751584AbaAPAWf (ORCPT ); Wed, 15 Jan 2014 19:22:35 -0500 Received: from atrey.karlin.mff.cuni.cz ([195.113.26.193]:52386 "EHLO atrey.karlin.mff.cuni.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750856AbaAPAW3 (ORCPT ); Wed, 15 Jan 2014 19:22:29 -0500 Date: Thu, 16 Jan 2014 01:22:24 +0100 From: Pavel Machek To: Marcel Holtmann Cc: Pali =?iso-8859-1?Q?Roh=E1r?= , =?utf-8?B?0JjQstCw0LnQu9C+INCU0LjQvNC40YLRgNC+0LI=?= , "Gustavo F. Padovan" , Johan Hedberg , linux-kernel , "linux-bluetooth@vger.kernel.org development" , Ville Tervo , Sebastian Reichel Subject: Re: [PATCH v6] Bluetooth: Add hci_h4p driver Message-ID: <20140116002224.GB3726@amd.pavel.ucw.cz> References: <1379703710-5757-1-git-send-email-pali.rohar@gmail.com> <1727897.LBX8128hIo@izba> <20140102161824.GA8204@amd.pavel.ucw.cz> <20140103001753.GA21023@amd.pavel.ucw.cz> <20140110145207.GB12048@amd.pavel.ucw.cz> <20140111002801.GA20216@amd.pavel.ucw.cz> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20140111002801.GA20216@amd.pavel.ucw.cz> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi! Ping? I did see it in bluetooth-next. Could we get it applied? Thanks, Pavel On Sat 2014-01-11 01:28:01, Pavel Machek wrote: > Add hci_h4p bluetooth driver to bluetooth-next. This device is used > for example on Nokia N900 cell phone. > > Signed-off-by: Pali Roh?r > Signed-off-by: Pavel Machek > Thanks-to: Sebastian Reichel > Thanks-to: Joe Perches > > --- > > Changes from v5: Comment fixes and some refactoring suggested by > Joe Perches. Please apply. > > diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig > index 11a6104..a53e8c7 100644 > --- a/drivers/bluetooth/Kconfig > +++ b/drivers/bluetooth/Kconfig > @@ -241,5 +241,15 @@ config BT_WILINK > core driver to communicate with the BT core of the combo chip. > > Say Y here to compile support for Texas Instrument's WiLink7 driver > - into the kernel or say M to compile it as module. > + into the kernel or say M to compile it as module (btwilink). > + > +config BT_NOKIA_H4P > + tristate "HCI driver with H4 Nokia extensions" > + depends on BT && ARCH_OMAP > + help > + Bluetooth HCI driver with H4 extensions. This driver provides > + support for H4+ Bluetooth chip with vendor-specific H4 extensions. > + > + Say Y here to compile support for h4 extended devices into the kernel > + or say M to compile it as module (btnokia_h4p). > endmenu > diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile > index 9fe8a87..6f25db2 100644 > --- a/drivers/bluetooth/Makefile > +++ b/drivers/bluetooth/Makefile > @@ -31,4 +31,8 @@ hci_uart-$(CONFIG_BT_HCIUART_ATH3K) += hci_ath.o > hci_uart-$(CONFIG_BT_HCIUART_3WIRE) += hci_h5.o > hci_uart-objs := $(hci_uart-y) > > +obj-$(CONFIG_BT_NOKIA_H4P) += btnokia_h4p.o > +btnokia_h4p-objs := nokia_core.o nokia_fw.o nokia_uart.o nokia_fw-csr.o \ > + nokia_fw-bcm.o nokia_fw-ti1273.o > + > ccflags-y += -D__CHECK_ENDIAN__ > diff --git a/drivers/bluetooth/hci_h4p.h b/drivers/bluetooth/hci_h4p.h > new file mode 100644 > index 0000000..fd7a640 > --- /dev/null > +++ b/drivers/bluetooth/hci_h4p.h > @@ -0,0 +1,228 @@ > +/* > + * This file is part of Nokia H4P bluetooth driver > + * > + * Copyright (C) 2005-2008 Nokia Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#ifndef __DRIVERS_BLUETOOTH_HCI_H4P_H > +#define __DRIVERS_BLUETOOTH_HCI_H4P_H > + > +#include > +#include > +#include > + > +#define FW_NAME_TI1271_PRELE "ti1273_prele.bin" > +#define FW_NAME_TI1271_LE "ti1273_le.bin" > +#define FW_NAME_TI1271 "ti1273.bin" > +#define FW_NAME_BCM2048 "bcmfw.bin" > +#define FW_NAME_CSR "bc4fw.bin" > + > +#define UART_SYSC_OMAP_RESET 0x03 > +#define UART_SYSS_RESETDONE 0x01 > +#define UART_OMAP_SCR_EMPTY_THR 0x08 > +#define UART_OMAP_SCR_WAKEUP 0x10 > +#define UART_OMAP_SSR_WAKEUP 0x02 > +#define UART_OMAP_SSR_TXFULL 0x01 > + > +#define UART_OMAP_SYSC_IDLEMODE 0x03 > +#define UART_OMAP_SYSC_IDLEMASK (3 << UART_OMAP_SYSC_IDLEMODE) > + > +#define UART_OMAP_SYSC_FORCE_IDLE (0 << UART_OMAP_SYSC_IDLEMODE) > +#define UART_OMAP_SYSC_NO_IDLE (1 << UART_OMAP_SYSC_IDLEMODE) > +#define UART_OMAP_SYSC_SMART_IDLE (2 << UART_OMAP_SYSC_IDLEMODE) > + > +#define H4P_TRANSFER_MODE 1 > +#define H4P_SCHED_TRANSFER_MODE 2 > +#define H4P_ACTIVE_MODE 3 > + > +struct hci_h4p_info { > + struct timer_list lazy_release; > + struct hci_dev *hdev; > + spinlock_t lock; > + > + void __iomem *uart_base; > + unsigned long uart_phys_base; > + int irq; > + struct device *dev; > + u8 chip_type; > + u8 bt_wakeup_gpio; > + u8 host_wakeup_gpio; > + u8 reset_gpio; > + u8 reset_gpio_shared; > + u8 bt_sysclk; > + u8 man_id; > + u8 ver_id; > + > + struct sk_buff_head fw_queue; > + struct sk_buff *alive_cmd_skb; > + struct completion init_completion; > + struct completion fw_completion; > + struct completion test_completion; > + int fw_error; > + int init_error; > + > + struct sk_buff_head txq; > + > + struct sk_buff *rx_skb; > + long rx_count; > + unsigned long rx_state; > + unsigned long garbage_bytes; > + > + u8 bd_addr[6]; > + struct sk_buff_head *fw_q; > + > + int pm_enabled; > + int tx_enabled; > + int autorts; > + int rx_enabled; > + unsigned long pm_flags; > + > + int tx_clocks_en; > + int rx_clocks_en; > + spinlock_t clocks_lock; > + struct clk *uart_iclk; > + struct clk *uart_fclk; > + atomic_t clk_users; > + u16 dll; > + u16 dlh; > + u16 ier; > + u16 mdr1; > + u16 efr; > +}; > + > +struct hci_h4p_radio_hdr { > + __u8 evt; > + __u8 dlen; > +} __attribute__ ((packed)); > + > +struct hci_h4p_neg_hdr { > + __u8 dlen; > +} __attribute__ ((packed)); > +#define H4P_NEG_HDR_SIZE 1 > + > +#define H4P_NEG_REQ 0x00 > +#define H4P_NEG_ACK 0x20 > +#define H4P_NEG_NAK 0x40 > + > +#define H4P_PROTO_PKT 0x44 > +#define H4P_PROTO_BYTE 0x4c > + > +#define H4P_ID_CSR 0x02 > +#define H4P_ID_BCM2048 0x04 > +#define H4P_ID_TI1271 0x31 > + > +struct hci_h4p_neg_cmd { > + __u8 ack; > + __u16 baud; > + __u16 unused1; > + __u8 proto; > + __u16 sys_clk; > + __u16 unused2; > +} __attribute__ ((packed)); > + > +struct hci_h4p_neg_evt { > + __u8 ack; > + __u16 baud; > + __u16 unused1; > + __u8 proto; > + __u16 sys_clk; > + __u16 unused2; > + __u8 man_id; > + __u8 ver_id; > +} __attribute__ ((packed)); > + > +#define H4P_ALIVE_REQ 0x55 > +#define H4P_ALIVE_RESP 0xcc > + > +struct hci_h4p_alive_hdr { > + __u8 dlen; > +} __attribute__ ((packed)); > +#define H4P_ALIVE_HDR_SIZE 1 > + > +struct hci_h4p_alive_pkt { > + __u8 mid; > + __u8 unused; > +} __attribute__ ((packed)); > + > +#define MAX_BAUD_RATE 921600 > +#define BC4_MAX_BAUD_RATE 3692300 > +#define UART_CLOCK 48000000 > +#define BT_INIT_DIVIDER 320 > +#define BT_BAUDRATE_DIVIDER 384000000 > +#define BT_SYSCLK_DIV 1000 > +#define INIT_SPEED 120000 > + > +#define H4_TYPE_SIZE 1 > +#define H4_RADIO_HDR_SIZE 2 > + > +/* H4+ packet types */ > +#define H4_CMD_PKT 0x01 > +#define H4_ACL_PKT 0x02 > +#define H4_SCO_PKT 0x03 > +#define H4_EVT_PKT 0x04 > +#define H4_NEG_PKT 0x06 > +#define H4_ALIVE_PKT 0x07 > +#define H4_RADIO_PKT 0x08 > + > +/* TX states */ > +#define WAIT_FOR_PKT_TYPE 1 > +#define WAIT_FOR_HEADER 2 > +#define WAIT_FOR_DATA 3 > + > +struct hci_fw_event { > + struct hci_event_hdr hev; > + struct hci_ev_cmd_complete cmd; > + u8 status; > +} __attribute__ ((packed)); > + > +int hci_h4p_send_alive_packet(struct hci_h4p_info *info); > + > +void hci_h4p_bcm_parse_fw_event(struct hci_h4p_info *info, > + struct sk_buff *skb); > +int hci_h4p_bcm_send_fw(struct hci_h4p_info *info, > + struct sk_buff_head *fw_queue); > + > +void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info, > + struct sk_buff *skb); > +int hci_h4p_bc4_send_fw(struct hci_h4p_info *info, > + struct sk_buff_head *fw_queue); > + > +void hci_h4p_ti1273_parse_fw_event(struct hci_h4p_info *info, > + struct sk_buff *skb); > +int hci_h4p_ti1273_send_fw(struct hci_h4p_info *info, > + struct sk_buff_head *fw_queue); > + > +int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue); > +int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue); > +void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb); > + > +void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val); > +u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset); > +void hci_h4p_set_rts(struct hci_h4p_info *info, int active); > +int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active, int timeout_ms); > +void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which); > +void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which); > +void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed); > +int hci_h4p_reset_uart(struct hci_h4p_info *info); > +void hci_h4p_init_uart(struct hci_h4p_info *info); > +void hci_h4p_enable_tx(struct hci_h4p_info *info); > +void hci_h4p_store_regs(struct hci_h4p_info *info); > +void hci_h4p_restore_regs(struct hci_h4p_info *info); > +void hci_h4p_smart_idle(struct hci_h4p_info *info, bool enable); > + > +#endif /* __DRIVERS_BLUETOOTH_HCI_H4P_H */ > diff --git a/drivers/bluetooth/nokia_core.c b/drivers/bluetooth/nokia_core.c > new file mode 100644 > index 0000000..54ec594 > --- /dev/null > +++ b/drivers/bluetooth/nokia_core.c > @@ -0,0 +1,1205 @@ > +/* > + * This file is part of Nokia H4P bluetooth driver > + * > + * Copyright (C) 2005-2008 Nokia Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + * Thanks to all the Nokia people that helped with this driver, > + * including Ville Tervo and Roger Quadros. > + * > + * Power saving functionality was removed from this driver to make > + * merging easier. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > + > +#include > + > +#include "hci_h4p.h" > + > +/* This should be used in function that cannot release clocks */ > +static void hci_h4p_set_clk(struct hci_h4p_info *info, int *clock, int enable) > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&info->clocks_lock, flags); > + if (enable && !*clock) { > + BT_DBG("Enabling %p", clock); > + clk_prepare_enable(info->uart_fclk); > + clk_prepare_enable(info->uart_iclk); > + if (atomic_read(&info->clk_users) == 0) > + hci_h4p_restore_regs(info); > + atomic_inc(&info->clk_users); > + } > + > + if (!enable && *clock) { > + BT_DBG("Disabling %p", clock); > + if (atomic_dec_and_test(&info->clk_users)) > + hci_h4p_store_regs(info); > + clk_disable_unprepare(info->uart_fclk); > + clk_disable_unprepare(info->uart_iclk); > + } > + > + *clock = enable; > + spin_unlock_irqrestore(&info->clocks_lock, flags); > +} > + > +static void hci_h4p_lazy_clock_release(unsigned long data) > +{ > + struct hci_h4p_info *info = (struct hci_h4p_info *)data; > + unsigned long flags; > + > + spin_lock_irqsave(&info->lock, flags); > + if (!info->tx_enabled) > + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); > + spin_unlock_irqrestore(&info->lock, flags); > +} > + > +/* Power management functions */ > +void hci_h4p_smart_idle(struct hci_h4p_info *info, bool enable) > +{ > + u8 v; > + > + v = hci_h4p_inb(info, UART_OMAP_SYSC); > + v &= ~(UART_OMAP_SYSC_IDLEMASK); > + > + if (enable) > + v |= UART_OMAP_SYSC_SMART_IDLE; > + else > + v |= UART_OMAP_SYSC_NO_IDLE; > + > + hci_h4p_outb(info, UART_OMAP_SYSC, v); > +} > + > +static inline void h4p_schedule_pm(struct hci_h4p_info *info) > +{ > +} > + > +static void hci_h4p_disable_tx(struct hci_h4p_info *info) > +{ > + if (!info->pm_enabled) > + return; > + > + /* Re-enable smart-idle */ > + hci_h4p_smart_idle(info, 1); > + > + gpio_set_value(info->bt_wakeup_gpio, 0); > + mod_timer(&info->lazy_release, jiffies + msecs_to_jiffies(100)); > + info->tx_enabled = 0; > +} > + > +void hci_h4p_enable_tx(struct hci_h4p_info *info) > +{ > + unsigned long flags; > + > + if (!info->pm_enabled) > + return; > + > + h4p_schedule_pm(info); > + > + spin_lock_irqsave(&info->lock, flags); > + del_timer(&info->lazy_release); > + hci_h4p_set_clk(info, &info->tx_clocks_en, 1); > + info->tx_enabled = 1; > + gpio_set_value(info->bt_wakeup_gpio, 1); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + /* > + * Disable smart-idle as UART TX interrupts > + * are not wake-up capable > + */ > + hci_h4p_smart_idle(info, 0); > + > + spin_unlock_irqrestore(&info->lock, flags); > +} > + > +static void hci_h4p_disable_rx(struct hci_h4p_info *info) > +{ > + if (!info->pm_enabled) > + return; > + > + info->rx_enabled = 0; > + > + if (hci_h4p_inb(info, UART_LSR) & UART_LSR_DR) > + return; > + > + if (!(hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT)) > + return; > + > + __hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS); > + info->autorts = 0; > + hci_h4p_set_clk(info, &info->rx_clocks_en, 0); > +} > + > +static void hci_h4p_enable_rx(struct hci_h4p_info *info) > +{ > + if (!info->pm_enabled) > + return; > + > + h4p_schedule_pm(info); > + > + hci_h4p_set_clk(info, &info->rx_clocks_en, 1); > + info->rx_enabled = 1; > + > + if (!(hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT)) > + return; > + > + __hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS); > + info->autorts = 1; > +} > + > +/* Negotiation functions */ > +int hci_h4p_send_alive_packet(struct hci_h4p_info *info) > +{ > + struct hci_h4p_alive_hdr *hdr; > + struct hci_h4p_alive_pkt *pkt; > + struct sk_buff *skb; > + unsigned long flags; > + int len; > + > + BT_DBG("Sending alive packet"); > + > + len = H4_TYPE_SIZE + sizeof(*hdr) + sizeof(*pkt); > + skb = bt_skb_alloc(len, GFP_KERNEL); > + if (!skb) > + return -ENOMEM; > + > + memset(skb->data, 0x00, len); > + *skb_put(skb, 1) = H4_ALIVE_PKT; > + hdr = (struct hci_h4p_alive_hdr *)skb_put(skb, sizeof(*hdr)); > + hdr->dlen = sizeof(*pkt); > + pkt = (struct hci_h4p_alive_pkt *)skb_put(skb, sizeof(*pkt)); > + pkt->mid = H4P_ALIVE_REQ; > + > + skb_queue_tail(&info->txq, skb); > + spin_lock_irqsave(&info->lock, flags); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + spin_unlock_irqrestore(&info->lock, flags); > + > + BT_DBG("Alive packet sent"); > + > + return 0; > +} > + > +static void hci_h4p_alive_packet(struct hci_h4p_info *info, > + struct sk_buff *skb) > +{ > + struct hci_h4p_alive_hdr *hdr; > + struct hci_h4p_alive_pkt *pkt; > + > + BT_DBG("Received alive packet"); > + hdr = (struct hci_h4p_alive_hdr *)skb->data; > + if (hdr->dlen != sizeof(*pkt)) { > + dev_err(info->dev, "Corrupted alive message\n"); > + info->init_error = -EIO; > + goto finish_alive; > + } > + > + pkt = (struct hci_h4p_alive_pkt *)skb_pull(skb, sizeof(*hdr)); > + if (pkt->mid != H4P_ALIVE_RESP) { > + dev_err(info->dev, "Could not negotiate hci_h4p settings\n"); > + info->init_error = -EINVAL; > + } > + > +finish_alive: > + complete(&info->init_completion); > + kfree_skb(skb); > +} > + > +static int hci_h4p_send_negotiation(struct hci_h4p_info *info) > +{ > + struct hci_h4p_neg_cmd *neg_cmd; > + struct hci_h4p_neg_hdr *neg_hdr; > + struct sk_buff *skb; > + unsigned long flags; > + int err, len; > + u16 sysclk; > + > + BT_DBG("Sending negotiation.."); > + > + switch (info->bt_sysclk) { > + case 1: > + sysclk = 12000; > + break; > + case 2: > + sysclk = 38400; > + break; > + default: > + return -EINVAL; > + } > + > + len = sizeof(*neg_cmd) + sizeof(*neg_hdr) + H4_TYPE_SIZE; > + skb = bt_skb_alloc(len, GFP_KERNEL); > + if (!skb) > + return -ENOMEM; > + > + memset(skb->data, 0x00, len); > + *skb_put(skb, 1) = H4_NEG_PKT; > + neg_hdr = (struct hci_h4p_neg_hdr *)skb_put(skb, sizeof(*neg_hdr)); > + neg_cmd = (struct hci_h4p_neg_cmd *)skb_put(skb, sizeof(*neg_cmd)); > + > + neg_hdr->dlen = sizeof(*neg_cmd); > + neg_cmd->ack = H4P_NEG_REQ; > + neg_cmd->baud = cpu_to_le16(BT_BAUDRATE_DIVIDER/MAX_BAUD_RATE); > + neg_cmd->proto = H4P_PROTO_BYTE; > + neg_cmd->sys_clk = cpu_to_le16(sysclk); > + > + hci_h4p_change_speed(info, INIT_SPEED); > + > + hci_h4p_set_rts(info, 1); > + info->init_error = 0; > + init_completion(&info->init_completion); > + skb_queue_tail(&info->txq, skb); > + spin_lock_irqsave(&info->lock, flags); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + spin_unlock_irqrestore(&info->lock, flags); > + > + if (!wait_for_completion_interruptible_timeout(&info->init_completion, > + msecs_to_jiffies(1000))) > + return -ETIMEDOUT; > + > + if (info->init_error < 0) > + return info->init_error; > + > + /* Change to operational settings */ > + hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS); > + hci_h4p_set_rts(info, 0); > + hci_h4p_change_speed(info, MAX_BAUD_RATE); > + > + err = hci_h4p_wait_for_cts(info, 1, 100); > + if (err < 0) > + return err; > + > + hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS); > + init_completion(&info->init_completion); > + err = hci_h4p_send_alive_packet(info); > + > + if (err < 0) > + return err; > + > + if (!wait_for_completion_interruptible_timeout(&info->init_completion, > + msecs_to_jiffies(1000))) > + return -ETIMEDOUT; > + > + if (info->init_error < 0) > + return info->init_error; > + > + BT_DBG("Negotiation successful"); > + return 0; > +} > + > +static void hci_h4p_negotiation_packet(struct hci_h4p_info *info, > + struct sk_buff *skb) > +{ > + struct hci_h4p_neg_hdr *hdr; > + struct hci_h4p_neg_evt *evt; > + > + hdr = (struct hci_h4p_neg_hdr *)skb->data; > + if (hdr->dlen != sizeof(*evt)) { > + info->init_error = -EIO; > + goto finish_neg; > + } > + > + evt = (struct hci_h4p_neg_evt *)skb_pull(skb, sizeof(*hdr)); > + > + if (evt->ack != H4P_NEG_ACK) { > + dev_err(info->dev, "Could not negotiate hci_h4p settings\n"); > + info->init_error = -EINVAL; > + } > + > + info->man_id = evt->man_id; > + info->ver_id = evt->ver_id; > + > +finish_neg: > + > + complete(&info->init_completion); > + kfree_skb(skb); > +} > + > +/* H4 packet handling functions */ > +static int hci_h4p_get_hdr_len(struct hci_h4p_info *info, u8 pkt_type) > +{ > + long retval; > + > + switch (pkt_type) { > + case H4_EVT_PKT: > + retval = HCI_EVENT_HDR_SIZE; > + break; > + case H4_ACL_PKT: > + retval = HCI_ACL_HDR_SIZE; > + break; > + case H4_SCO_PKT: > + retval = HCI_SCO_HDR_SIZE; > + break; > + case H4_NEG_PKT: > + retval = H4P_NEG_HDR_SIZE; > + break; > + case H4_ALIVE_PKT: > + retval = H4P_ALIVE_HDR_SIZE; > + break; > + case H4_RADIO_PKT: > + retval = H4_RADIO_HDR_SIZE; > + break; > + default: > + dev_err(info->dev, "Unknown H4 packet type 0x%.2x\n", pkt_type); > + retval = -1; > + break; > + } > + > + return retval; > +} > + > +static unsigned int hci_h4p_get_data_len(struct hci_h4p_info *info, > + struct sk_buff *skb) > +{ > + long retval = -1; > + struct hci_acl_hdr *acl_hdr; > + struct hci_sco_hdr *sco_hdr; > + struct hci_event_hdr *evt_hdr; > + struct hci_h4p_neg_hdr *neg_hdr; > + struct hci_h4p_alive_hdr *alive_hdr; > + struct hci_h4p_radio_hdr *radio_hdr; > + > + switch (bt_cb(skb)->pkt_type) { > + case H4_EVT_PKT: > + evt_hdr = (struct hci_event_hdr *)skb->data; > + retval = evt_hdr->plen; > + break; > + case H4_ACL_PKT: > + acl_hdr = (struct hci_acl_hdr *)skb->data; > + retval = le16_to_cpu(acl_hdr->dlen); > + break; > + case H4_SCO_PKT: > + sco_hdr = (struct hci_sco_hdr *)skb->data; > + retval = sco_hdr->dlen; > + break; > + case H4_RADIO_PKT: > + radio_hdr = (struct hci_h4p_radio_hdr *)skb->data; > + retval = radio_hdr->dlen; > + break; > + case H4_NEG_PKT: > + neg_hdr = (struct hci_h4p_neg_hdr *)skb->data; > + retval = neg_hdr->dlen; > + break; > + case H4_ALIVE_PKT: > + alive_hdr = (struct hci_h4p_alive_hdr *)skb->data; > + retval = alive_hdr->dlen; > + break; > + } > + > + return retval; > +} > + > +static inline void hci_h4p_recv_frame(struct hci_h4p_info *info, > + struct sk_buff *skb) > +{ > + if (unlikely(!test_bit(HCI_RUNNING, &info->hdev->flags))) { > + switch (bt_cb(skb)->pkt_type) { > + case H4_NEG_PKT: > + hci_h4p_negotiation_packet(info, skb); > + info->rx_state = WAIT_FOR_PKT_TYPE; > + return; > + case H4_ALIVE_PKT: > + hci_h4p_alive_packet(info, skb); > + info->rx_state = WAIT_FOR_PKT_TYPE; > + return; > + } > + > + if (!test_bit(HCI_UP, &info->hdev->flags)) { > + BT_DBG("fw_event"); > + hci_h4p_parse_fw_event(info, skb); > + return; > + } > + } > + > + hci_recv_frame(info->hdev, skb); > + BT_DBG("Frame sent to upper layer"); > +} > + > +static inline void hci_h4p_handle_byte(struct hci_h4p_info *info, u8 byte) > +{ > + switch (info->rx_state) { > + case WAIT_FOR_PKT_TYPE: > + bt_cb(info->rx_skb)->pkt_type = byte; > + info->rx_count = hci_h4p_get_hdr_len(info, byte); > + if (info->rx_count < 0) { > + info->hdev->stat.err_rx++; > + kfree_skb(info->rx_skb); > + info->rx_skb = NULL; > + } else { > + info->rx_state = WAIT_FOR_HEADER; > + } > + break; > + case WAIT_FOR_HEADER: > + info->rx_count--; > + *skb_put(info->rx_skb, 1) = byte; > + if (info->rx_count != 0) > + break; > + info->rx_count = hci_h4p_get_data_len(info, info->rx_skb); > + if (info->rx_count > skb_tailroom(info->rx_skb)) { > + dev_err(info->dev, "frame too long\n"); > + info->garbage_bytes = info->rx_count > + - skb_tailroom(info->rx_skb); > + kfree_skb(info->rx_skb); > + info->rx_skb = NULL; > + break; > + } > + info->rx_state = WAIT_FOR_DATA; > + break; > + case WAIT_FOR_DATA: > + info->rx_count--; > + *skb_put(info->rx_skb, 1) = byte; > + break; > + default: > + WARN_ON(1); > + break; > + } > + > + if (info->rx_count == 0) { > + /* H4+ devices should always send word aligned packets */ > + if (!(info->rx_skb->len % 2)) > + info->garbage_bytes++; > + hci_h4p_recv_frame(info, info->rx_skb); > + info->rx_skb = NULL; > + } > +} > + > +static void hci_h4p_rx_tasklet(unsigned long data) > +{ > + u8 byte; > + struct hci_h4p_info *info = (struct hci_h4p_info *)data; > + > + BT_DBG("tasklet woke up"); > + BT_DBG("rx_tasklet woke up"); > + > + while (hci_h4p_inb(info, UART_LSR) & UART_LSR_DR) { > + byte = hci_h4p_inb(info, UART_RX); > + if (info->garbage_bytes) { > + info->garbage_bytes--; > + continue; > + } > + if (info->rx_skb == NULL) { > + info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, > + GFP_ATOMIC | GFP_DMA); > + if (!info->rx_skb) { > + dev_err(info->dev, > + "No memory for new packet\n"); > + goto finish_rx; > + } > + info->rx_state = WAIT_FOR_PKT_TYPE; > + info->rx_skb->dev = (void *)info->hdev; > + } > + info->hdev->stat.byte_rx++; > + hci_h4p_handle_byte(info, byte); > + } > + > + if (!info->rx_enabled) { > + if (hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT && > + info->autorts) { > + __hci_h4p_set_auto_ctsrts(info, 0 , UART_EFR_RTS); > + info->autorts = 0; > + } > + /* Flush posted write to avoid spurious interrupts */ > + hci_h4p_inb(info, UART_OMAP_SCR); > + hci_h4p_set_clk(info, &info->rx_clocks_en, 0); > + } > + > +finish_rx: > + BT_DBG("rx_ended"); > +} > + > +static void hci_h4p_tx_tasklet(unsigned long data) > +{ > + unsigned int sent = 0; > + struct sk_buff *skb; > + struct hci_h4p_info *info = (struct hci_h4p_info *)data; > + > + BT_DBG("tasklet woke up"); > + BT_DBG("tx_tasklet woke up"); > + > + if (info->autorts != info->rx_enabled) { > + if (hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT) { > + if (info->autorts && !info->rx_enabled) { > + __hci_h4p_set_auto_ctsrts(info, 0, > + UART_EFR_RTS); > + info->autorts = 0; > + } > + if (!info->autorts && info->rx_enabled) { > + __hci_h4p_set_auto_ctsrts(info, 1, > + UART_EFR_RTS); > + info->autorts = 1; > + } > + } else { > + hci_h4p_outb(info, UART_OMAP_SCR, > + hci_h4p_inb(info, UART_OMAP_SCR) | > + UART_OMAP_SCR_EMPTY_THR); > + goto finish_tx; > + } > + } > + > + skb = skb_dequeue(&info->txq); > + if (!skb) { > + /* No data in buffer */ > + BT_DBG("skb ready"); > + if (hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT) { > + hci_h4p_outb(info, UART_IER, > + hci_h4p_inb(info, UART_IER) & > + ~UART_IER_THRI); > + hci_h4p_inb(info, UART_OMAP_SCR); > + hci_h4p_disable_tx(info); > + return; > + } > + hci_h4p_outb(info, UART_OMAP_SCR, > + hci_h4p_inb(info, UART_OMAP_SCR) | > + UART_OMAP_SCR_EMPTY_THR); > + goto finish_tx; > + } > + > + /* Copy data to tx fifo */ > + while (!(hci_h4p_inb(info, UART_OMAP_SSR) & UART_OMAP_SSR_TXFULL) && > + (sent < skb->len)) { > + hci_h4p_outb(info, UART_TX, skb->data[sent]); > + sent++; > + } > + > + info->hdev->stat.byte_tx += sent; > + if (skb->len == sent) { > + kfree_skb(skb); > + } else { > + skb_pull(skb, sent); > + skb_queue_head(&info->txq, skb); > + } > + > + hci_h4p_outb(info, UART_OMAP_SCR, hci_h4p_inb(info, UART_OMAP_SCR) & > + ~UART_OMAP_SCR_EMPTY_THR); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + > +finish_tx: > + /* Flush posted write to avoid spurious interrupts */ > + hci_h4p_inb(info, UART_OMAP_SCR); > + > +} > + > +static irqreturn_t hci_h4p_interrupt(int irq, void *data) > +{ > + struct hci_h4p_info *info = (struct hci_h4p_info *)data; > + u8 iir, msr; > + int ret; > + > + ret = IRQ_NONE; > + > + iir = hci_h4p_inb(info, UART_IIR); > + if (iir & UART_IIR_NO_INT) > + return IRQ_HANDLED; > + > + BT_DBG("In interrupt handler iir 0x%.2x", iir); > + > + iir &= UART_IIR_ID; > + > + if (iir == UART_IIR_MSI) { > + msr = hci_h4p_inb(info, UART_MSR); > + ret = IRQ_HANDLED; > + } > + if (iir == UART_IIR_RLSI) { > + hci_h4p_inb(info, UART_RX); > + hci_h4p_inb(info, UART_LSR); > + ret = IRQ_HANDLED; > + } > + > + if (iir == UART_IIR_RDI) { > + hci_h4p_rx_tasklet((unsigned long)data); > + ret = IRQ_HANDLED; > + } > + > + if (iir == UART_IIR_THRI) { > + hci_h4p_tx_tasklet((unsigned long)data); > + ret = IRQ_HANDLED; > + } > + > + return ret; > +} > + > +static irqreturn_t hci_h4p_wakeup_interrupt(int irq, void *dev_inst) > +{ > + struct hci_h4p_info *info = dev_inst; > + int should_wakeup; > + struct hci_dev *hdev; > + > + if (!info->hdev) > + return IRQ_HANDLED; > + > + should_wakeup = gpio_get_value(info->host_wakeup_gpio); > + hdev = info->hdev; > + > + if (!test_bit(HCI_RUNNING, &hdev->flags)) { > + if (should_wakeup == 1) > + complete_all(&info->test_completion); > + > + return IRQ_HANDLED; > + } > + > + BT_DBG("gpio interrupt %d", should_wakeup); > + > + /* Check if wee have missed some interrupts */ > + if (info->rx_enabled == should_wakeup) > + return IRQ_HANDLED; > + > + if (should_wakeup) > + hci_h4p_enable_rx(info); > + else > + hci_h4p_disable_rx(info); > + > + return IRQ_HANDLED; > +} > + > +static inline void hci_h4p_set_pm_limits(struct hci_h4p_info *info, bool set) > +{ > + struct hci_h4p_platform_data *bt_plat_data = info->dev->platform_data; > + const char *sset = set ? "set" : "clear"; > + > + if (unlikely(!bt_plat_data || !bt_plat_data->set_pm_limits)) > + return; > + > + if (set != !!test_bit(H4P_ACTIVE_MODE, &info->pm_flags)) { > + bt_plat_data->set_pm_limits(info->dev, set); > + if (set) > + set_bit(H4P_ACTIVE_MODE, &info->pm_flags); > + else > + clear_bit(H4P_ACTIVE_MODE, &info->pm_flags); > + BT_DBG("Change pm constraints to: %s", sset); > + return; > + } > + > + BT_DBG("pm constraints remains: %s", sset); > +} > + > +static int hci_h4p_reset(struct hci_h4p_info *info) > +{ > + int err; > + > + err = hci_h4p_reset_uart(info); > + if (err < 0) { > + dev_err(info->dev, "Uart reset failed\n"); > + return err; > + } > + hci_h4p_init_uart(info); > + hci_h4p_set_rts(info, 0); > + > + gpio_set_value(info->reset_gpio, 0); > + gpio_set_value(info->bt_wakeup_gpio, 1); > + msleep(10); > + > + if (gpio_get_value(info->host_wakeup_gpio) == 1) { > + dev_err(info->dev, "host_wakeup_gpio not low\n"); > + return -EPROTO; > + } > + > + init_completion(&info->test_completion); > + gpio_set_value(info->reset_gpio, 1); > + > + if (!wait_for_completion_interruptible_timeout(&info->test_completion, > + msecs_to_jiffies(100))) { > + dev_err(info->dev, "wakeup test timed out\n"); > + complete_all(&info->test_completion); > + return -EPROTO; > + } > + > + err = hci_h4p_wait_for_cts(info, 1, 100); > + if (err < 0) { > + dev_err(info->dev, "No cts from bt chip\n"); > + return err; > + } > + > + hci_h4p_set_rts(info, 1); > + > + return 0; > +} > + > +/* hci callback functions */ > +static int hci_h4p_hci_flush(struct hci_dev *hdev) > +{ > + struct hci_h4p_info *info = hci_get_drvdata(hdev); > + skb_queue_purge(&info->txq); > + > + return 0; > +} > + > +static int hci_h4p_bt_wakeup_test(struct hci_h4p_info *info) > +{ > + /* > + * Test Sequence: > + * Host de-asserts the BT_WAKE_UP line. > + * Host polls the UART_CTS line, waiting for it to be de-asserted. > + * Host asserts the BT_WAKE_UP line. > + * Host polls the UART_CTS line, waiting for it to be asserted. > + * Host de-asserts the BT_WAKE_UP line (allow the Bluetooth device to > + * sleep). > + * Host polls the UART_CTS line, waiting for it to be de-asserted. > + */ > + int err; > + int ret = -ECOMM; > + > + if (!info) > + return -EINVAL; > + > + /* Disable wakeup interrupts */ > + disable_irq(gpio_to_irq(info->host_wakeup_gpio)); > + > + gpio_set_value(info->bt_wakeup_gpio, 0); > + err = hci_h4p_wait_for_cts(info, 0, 100); > + if (err) { > + dev_warn(info->dev, "bt_wakeup_test: fail: " > + "CTS low timed out: %d\n", err); > + goto out; > + } > + > + gpio_set_value(info->bt_wakeup_gpio, 1); > + err = hci_h4p_wait_for_cts(info, 1, 100); > + if (err) { > + dev_warn(info->dev, "bt_wakeup_test: fail: " > + "CTS high timed out: %d\n", err); > + goto out; > + } > + > + gpio_set_value(info->bt_wakeup_gpio, 0); > + err = hci_h4p_wait_for_cts(info, 0, 100); > + if (err) { > + dev_warn(info->dev, "bt_wakeup_test: fail: " > + "CTS re-low timed out: %d\n", err); > + goto out; > + } > + > + ret = 0; > + > +out: > + > + /* Re-enable wakeup interrupts */ > + enable_irq(gpio_to_irq(info->host_wakeup_gpio)); > + > + return ret; > +} > + > +static int hci_h4p_hci_open(struct hci_dev *hdev) > +{ > + struct hci_h4p_info *info; > + int err, retries = 0; > + struct sk_buff_head fw_queue; > + unsigned long flags; > + > + info = hci_get_drvdata(hdev); > + > + if (test_bit(HCI_RUNNING, &hdev->flags)) > + return 0; > + > + /* TI1271 has HW bug and boot up might fail. Retry up to three times */ > +again: > + > + info->rx_enabled = 1; > + info->rx_state = WAIT_FOR_PKT_TYPE; > + info->rx_count = 0; > + info->garbage_bytes = 0; > + info->rx_skb = NULL; > + info->pm_enabled = 0; > + init_completion(&info->fw_completion); > + hci_h4p_set_clk(info, &info->tx_clocks_en, 1); > + hci_h4p_set_clk(info, &info->rx_clocks_en, 1); > + skb_queue_head_init(&fw_queue); > + > + err = hci_h4p_reset(info); > + if (err < 0) > + goto err_clean; > + > + hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_CTS | UART_EFR_RTS); > + info->autorts = 1; > + > + err = hci_h4p_send_negotiation(info); > + > + err = hci_h4p_read_fw(info, &fw_queue); > + if (err < 0) { > + dev_err(info->dev, "Cannot read firmware\n"); > + goto err_clean; > + } > + > + err = hci_h4p_send_fw(info, &fw_queue); > + if (err < 0) { > + dev_err(info->dev, "Sending firmware failed.\n"); > + goto err_clean; > + } > + > + info->pm_enabled = 1; > + > + err = hci_h4p_bt_wakeup_test(info); > + if (err < 0) { > + dev_err(info->dev, "BT wakeup test failed.\n"); > + goto err_clean; > + } > + > + spin_lock_irqsave(&info->lock, flags); > + info->rx_enabled = gpio_get_value(info->host_wakeup_gpio); > + hci_h4p_set_clk(info, &info->rx_clocks_en, info->rx_enabled); > + spin_unlock_irqrestore(&info->lock, flags); > + > + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); > + > + kfree_skb(info->alive_cmd_skb); > + info->alive_cmd_skb = NULL; > + set_bit(HCI_RUNNING, &hdev->flags); > + > + BT_DBG("hci up and running"); > + return 0; > + > +err_clean: > + hci_h4p_hci_flush(hdev); > + hci_h4p_reset_uart(info); > + del_timer_sync(&info->lazy_release); > + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); > + hci_h4p_set_clk(info, &info->rx_clocks_en, 0); > + gpio_set_value(info->reset_gpio, 0); > + gpio_set_value(info->bt_wakeup_gpio, 0); > + skb_queue_purge(&fw_queue); > + kfree_skb(info->alive_cmd_skb); > + info->alive_cmd_skb = NULL; > + kfree_skb(info->rx_skb); > + info->rx_skb = NULL; > + > + if (retries++ < 3) { > + dev_err(info->dev, "FW loading try %d fail. Retry.\n", retries); > + goto again; > + } > + > + return err; > +} > + > +static int hci_h4p_hci_close(struct hci_dev *hdev) > +{ > + struct hci_h4p_info *info = hci_get_drvdata(hdev); > + > + if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) > + return 0; > + > + hci_h4p_hci_flush(hdev); > + hci_h4p_set_clk(info, &info->tx_clocks_en, 1); > + hci_h4p_set_clk(info, &info->rx_clocks_en, 1); > + hci_h4p_reset_uart(info); > + del_timer_sync(&info->lazy_release); > + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); > + hci_h4p_set_clk(info, &info->rx_clocks_en, 0); > + gpio_set_value(info->reset_gpio, 0); > + gpio_set_value(info->bt_wakeup_gpio, 0); > + kfree_skb(info->rx_skb); > + > + return 0; > +} > + > +static int hci_h4p_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) > +{ > + struct hci_h4p_info *info; > + int err = 0; > + > + BT_DBG("dev %p, skb %p", hdev, skb); > + > + info = hci_get_drvdata(hdev); > + > + if (!test_bit(HCI_RUNNING, &hdev->flags)) { > + dev_warn(info->dev, "Frame for non-running device\n"); > + return -EIO; > + } > + > + switch (bt_cb(skb)->pkt_type) { > + case HCI_COMMAND_PKT: > + hdev->stat.cmd_tx++; > + break; > + case HCI_ACLDATA_PKT: > + hdev->stat.acl_tx++; > + break; > + case HCI_SCODATA_PKT: > + hdev->stat.sco_tx++; > + break; > + } > + > + /* Push frame type to skb */ > + *skb_push(skb, 1) = (bt_cb(skb)->pkt_type); > + /* We should allways send word aligned data to h4+ devices */ > + if (skb->len % 2) { > + err = skb_pad(skb, 1); > + if (!err) > + *skb_put(skb, 1) = 0x00; > + } > + if (err) > + return err; > + > + skb_queue_tail(&info->txq, skb); > + hci_h4p_enable_tx(info); > + > + return 0; > +} > + > +static ssize_t hci_h4p_store_bdaddr(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct hci_h4p_info *info = dev_get_drvdata(dev); > + unsigned int bdaddr[6]; > + int ret, i; > + > + ret = sscanf(buf, "%2x:%2x:%2x:%2x:%2x:%2x\n", > + &bdaddr[0], &bdaddr[1], &bdaddr[2], > + &bdaddr[3], &bdaddr[4], &bdaddr[5]); > + > + if (ret != 6) > + return -EINVAL; > + > + for (i = 0; i < 6; i++) { > + if (bdaddr[i] > 0xff) > + return -EINVAL; > + info->bd_addr[i] = bdaddr[i] & 0xff; > + } > + > + return count; > +} > + > +static ssize_t hci_h4p_show_bdaddr(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct hci_h4p_info *info = dev_get_drvdata(dev); > + > + return sprintf(buf, "%pMR\n", info->bd_addr); > +} > + > +static DEVICE_ATTR(bdaddr, S_IRUGO | S_IWUSR, hci_h4p_show_bdaddr, > + hci_h4p_store_bdaddr); > + > +static int hci_h4p_sysfs_create_files(struct device *dev) > +{ > + return device_create_file(dev, &dev_attr_bdaddr); > +} > + > +static void hci_h4p_sysfs_remove_files(struct device *dev) > +{ > + device_remove_file(dev, &dev_attr_bdaddr); > +} > + > +static int hci_h4p_register_hdev(struct hci_h4p_info *info) > +{ > + struct hci_dev *hdev; > + > + /* Initialize and register HCI device */ > + > + hdev = hci_alloc_dev(); > + if (!hdev) { > + dev_err(info->dev, "Can't allocate memory for device\n"); > + return -ENOMEM; > + } > + info->hdev = hdev; > + > + hdev->bus = HCI_UART; > + hci_set_drvdata(hdev, info); > + > + hdev->open = hci_h4p_hci_open; > + hdev->close = hci_h4p_hci_close; > + hdev->flush = hci_h4p_hci_flush; > + hdev->send = hci_h4p_hci_send_frame; > + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); > + > + SET_HCIDEV_DEV(hdev, info->dev); > + > + if (hci_h4p_sysfs_create_files(info->dev) < 0) { > + dev_err(info->dev, "failed to create sysfs files\n"); > + goto free; > + } > + > + if (hci_register_dev(hdev) >= 0) > + return 0; > + > + dev_err(info->dev, "hci_register failed %s.\n", hdev->name); > + hci_h4p_sysfs_remove_files(info->dev); > +free: > + hci_free_dev(info->hdev); > + return -ENODEV; > +} > + > +static int hci_h4p_probe(struct platform_device *pdev) > +{ > + struct hci_h4p_platform_data *bt_plat_data; > + struct hci_h4p_info *info; > + int err; > + > + dev_info(&pdev->dev, "Registering HCI H4P device\n"); > + info = devm_kzalloc(&pdev->dev, sizeof(struct hci_h4p_info), GFP_KERNEL); > + if (!info) > + return -ENOMEM; > + > + info->dev = &pdev->dev; > + info->tx_enabled = 1; > + info->rx_enabled = 1; > + spin_lock_init(&info->lock); > + spin_lock_init(&info->clocks_lock); > + skb_queue_head_init(&info->txq); > + > + if (pdev->dev.platform_data == NULL) { > + dev_err(&pdev->dev, "Could not get Bluetooth config data\n"); > + return -ENODATA; > + } > + > + bt_plat_data = pdev->dev.platform_data; > + info->chip_type = bt_plat_data->chip_type; > + info->bt_wakeup_gpio = bt_plat_data->bt_wakeup_gpio; > + info->host_wakeup_gpio = bt_plat_data->host_wakeup_gpio; > + info->reset_gpio = bt_plat_data->reset_gpio; > + info->reset_gpio_shared = bt_plat_data->reset_gpio_shared; > + info->bt_sysclk = bt_plat_data->bt_sysclk; > + > + BT_DBG("RESET gpio: %d", info->reset_gpio); > + BT_DBG("BTWU gpio: %d", info->bt_wakeup_gpio); > + BT_DBG("HOSTWU gpio: %d", info->host_wakeup_gpio); > + BT_DBG("sysclk: %d", info->bt_sysclk); > + > + init_completion(&info->test_completion); > + complete_all(&info->test_completion); > + > + if (!info->reset_gpio_shared) { > + err = devm_gpio_request_one(&pdev->dev, info->reset_gpio, > + GPIOF_OUT_INIT_LOW, "bt_reset"); > + if (err < 0) { > + dev_err(&pdev->dev, "Cannot get GPIO line %d\n", > + info->reset_gpio); > + return err; > + } > + } > + > + err = devm_gpio_request_one(&pdev->dev, info->bt_wakeup_gpio, > + GPIOF_OUT_INIT_LOW, "bt_wakeup"); > + > + if (err < 0) { > + dev_err(info->dev, "Cannot get GPIO line 0x%d", > + info->bt_wakeup_gpio); > + return err; > + } > + > + err = devm_gpio_request_one(&pdev->dev, info->host_wakeup_gpio, > + GPIOF_DIR_IN, "host_wakeup"); > + if (err < 0) { > + dev_err(info->dev, "Cannot get GPIO line %d", > + info->host_wakeup_gpio); > + return err; > + } > + > + info->irq = bt_plat_data->uart_irq; > + info->uart_base = devm_ioremap(&pdev->dev, bt_plat_data->uart_base, SZ_2K); > + info->uart_iclk = devm_clk_get(&pdev->dev, bt_plat_data->uart_iclk); > + info->uart_fclk = devm_clk_get(&pdev->dev, bt_plat_data->uart_fclk); > + > + err = devm_request_irq(&pdev->dev, info->irq, hci_h4p_interrupt, IRQF_DISABLED, > + "hci_h4p", info); > + if (err < 0) { > + dev_err(info->dev, "hci_h4p: unable to get IRQ %d\n", info->irq); > + return err; > + } > + > + err = devm_request_irq(&pdev->dev, gpio_to_irq(info->host_wakeup_gpio), > + hci_h4p_wakeup_interrupt, IRQF_TRIGGER_FALLING | > + IRQF_TRIGGER_RISING | IRQF_DISABLED, > + "hci_h4p_wkup", info); > + if (err < 0) { > + dev_err(info->dev, "hci_h4p: unable to get wakeup IRQ %d\n", > + gpio_to_irq(info->host_wakeup_gpio)); > + return err; > + } > + > + err = irq_set_irq_wake(gpio_to_irq(info->host_wakeup_gpio), 1); > + if (err < 0) { > + dev_err(info->dev, "hci_h4p: unable to set wakeup for IRQ %d\n", > + gpio_to_irq(info->host_wakeup_gpio)); > + return err; > + } > + > + init_timer_deferrable(&info->lazy_release); > + info->lazy_release.function = hci_h4p_lazy_clock_release; > + info->lazy_release.data = (unsigned long)info; > + hci_h4p_set_clk(info, &info->tx_clocks_en, 1); > + err = hci_h4p_reset_uart(info); > + if (err < 0) > + return err; > + gpio_set_value(info->reset_gpio, 0); > + hci_h4p_set_clk(info, &info->tx_clocks_en, 0); > + > + platform_set_drvdata(pdev, info); > + > + if (hci_h4p_register_hdev(info) < 0) { > + dev_err(info->dev, "failed to register hci_h4p hci device\n"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int hci_h4p_remove(struct platform_device *pdev) > +{ > + struct hci_h4p_info *info; > + > + info = platform_get_drvdata(pdev); > + > + hci_h4p_sysfs_remove_files(info->dev); > + hci_h4p_hci_close(info->hdev); > + hci_unregister_dev(info->hdev); > + hci_free_dev(info->hdev); > + > + return 0; > +} > + > +static struct platform_driver hci_h4p_driver = { > + .probe = hci_h4p_probe, > + .remove = hci_h4p_remove, > + .driver = { > + .name = "hci_h4p", > + }, > +}; > + > +module_platform_driver(hci_h4p_driver); > + > +MODULE_ALIAS("platform:hci_h4p"); > +MODULE_DESCRIPTION("Bluetooth h4 driver with nokia extensions"); > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Ville Tervo"); > +MODULE_FIRMWARE(FW_NAME_TI1271_PRELE); > +MODULE_FIRMWARE(FW_NAME_TI1271_LE); > +MODULE_FIRMWARE(FW_NAME_TI1271); > +MODULE_FIRMWARE(FW_NAME_BCM2048); > +MODULE_FIRMWARE(FW_NAME_CSR); > diff --git a/drivers/bluetooth/nokia_fw-bcm.c b/drivers/bluetooth/nokia_fw-bcm.c > new file mode 100644 > index 0000000..e8912bf > --- /dev/null > +++ b/drivers/bluetooth/nokia_fw-bcm.c > @@ -0,0 +1,147 @@ > +/* > + * This file is part of Nokia H4P bluetooth driver > + * > + * Copyright (C) 2005-2008 Nokia Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#include > +#include > +#include > + > +#include "hci_h4p.h" > + > +static int hci_h4p_bcm_set_bdaddr(struct hci_h4p_info *info, struct sk_buff *skb) > +{ > + int i; > + static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf}; > + int not_valid; > + > + not_valid = 1; > + for (i = 0; i < 6; i++) { > + if (info->bd_addr[i] != 0x00) { > + not_valid = 0; > + break; > + } > + } > + > + if (not_valid) { > + dev_info(info->dev, "Valid bluetooth address not found, setting some random\n"); > + /* When address is not valid, use some random but Nokia MAC */ > + memcpy(info->bd_addr, nokia_oui, 3); > + get_random_bytes(info->bd_addr + 3, 3); > + } > + > + for (i = 0; i < 6; i++) > + skb->data[9 - i] = info->bd_addr[i]; > + > + return 0; > +} > + > +void hci_h4p_bcm_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb) > +{ > + struct sk_buff *fw_skb; > + int err; > + unsigned long flags; > + > + if (skb->data[5] != 0x00) { > + dev_err(info->dev, "Firmware sending command failed 0x%.2x\n", > + skb->data[5]); > + info->fw_error = -EPROTO; > + } > + > + kfree_skb(skb); > + > + fw_skb = skb_dequeue(info->fw_q); > + if (fw_skb == NULL || info->fw_error) { > + complete(&info->fw_completion); > + return; > + } > + > + if (fw_skb->data[1] == 0x01 && fw_skb->data[2] == 0xfc && fw_skb->len >= 10) { > + BT_DBG("Setting bluetooth address"); > + err = hci_h4p_bcm_set_bdaddr(info, fw_skb); > + if (err < 0) { > + kfree_skb(fw_skb); > + info->fw_error = err; > + complete(&info->fw_completion); > + return; > + } > + } > + > + skb_queue_tail(&info->txq, fw_skb); > + spin_lock_irqsave(&info->lock, flags); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + spin_unlock_irqrestore(&info->lock, flags); > +} > + > + > +int hci_h4p_bcm_send_fw(struct hci_h4p_info *info, > + struct sk_buff_head *fw_queue) > +{ > + struct sk_buff *skb; > + unsigned long flags, time; > + > + info->fw_error = 0; > + > + BT_DBG("Sending firmware"); > + > + time = jiffies; > + > + info->fw_q = fw_queue; > + skb = skb_dequeue(fw_queue); > + if (!skb) > + return -ENODATA; > + > + BT_DBG("Sending commands"); > + > + /* > + * Disable smart-idle as UART TX interrupts > + * are not wake-up capable > + */ > + hci_h4p_smart_idle(info, 0); > + > + /* Check if this is bd_address packet */ > + init_completion(&info->fw_completion); > + skb_queue_tail(&info->txq, skb); > + spin_lock_irqsave(&info->lock, flags); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + spin_unlock_irqrestore(&info->lock, flags); > + > + if (!wait_for_completion_timeout(&info->fw_completion, > + msecs_to_jiffies(2000))) { > + dev_err(info->dev, "No reply to fw command\n"); > + return -ETIMEDOUT; > + } > + > + if (info->fw_error) { > + dev_err(info->dev, "FW error\n"); > + return -EPROTO; > + } > + > + BT_DBG("Firmware sent in %d msecs", > + jiffies_to_msecs(jiffies-time)); > + > + hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS); > + hci_h4p_set_rts(info, 0); > + hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE); > + hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS); > + > + return 0; > +} > diff --git a/drivers/bluetooth/nokia_fw-csr.c b/drivers/bluetooth/nokia_fw-csr.c > new file mode 100644 > index 0000000..e39c4a3 > --- /dev/null > +++ b/drivers/bluetooth/nokia_fw-csr.c > @@ -0,0 +1,150 @@ > +/* > + * This file is part of Nokia H4P bluetooth driver > + * > + * Copyright (C) 2005-2008 Nokia Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#include > +#include > +#include > + > +#include "hci_h4p.h" > + > +void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb) > +{ > + /* Check if this is fw packet */ > + if (skb->data[0] != 0xff) { > + hci_recv_frame(info->hdev, skb); > + return; > + } > + > + if (skb->data[11] || skb->data[12]) { > + dev_err(info->dev, "Firmware sending command failed\n"); > + info->fw_error = -EPROTO; > + } > + > + kfree_skb(skb); > + complete(&info->fw_completion); > +} > + > +int hci_h4p_bc4_send_fw(struct hci_h4p_info *info, > + struct sk_buff_head *fw_queue) > +{ > + static const u8 nokia_oui[3] = {0x00, 0x19, 0x4F}; > + struct sk_buff *skb; > + unsigned int offset; > + int retries, count, i, not_valid; > + unsigned long flags; > + > + info->fw_error = 0; > + > + BT_DBG("Sending firmware"); > + skb = skb_dequeue(fw_queue); > + > + if (!skb) > + return -ENOMSG; > + > + /* Check if this is bd_address packet */ > + if (skb->data[15] == 0x01 && skb->data[16] == 0x00) { > + offset = 21; > + skb->data[offset + 1] = 0x00; > + skb->data[offset + 5] = 0x00; > + > + not_valid = 1; > + for (i = 0; i < 6; i++) { > + if (info->bd_addr[i] != 0x00) { > + not_valid = 0; > + break; > + } > + } > + > + if (not_valid) { > + dev_info(info->dev, "Valid bluetooth address not found," > + " setting some random\n"); > + /* When address is not valid, use some random */ > + memcpy(info->bd_addr, nokia_oui, 3); > + get_random_bytes(info->bd_addr + 3, 3); > + } > + > + skb->data[offset + 7] = info->bd_addr[0]; > + skb->data[offset + 6] = info->bd_addr[1]; > + skb->data[offset + 4] = info->bd_addr[2]; > + skb->data[offset + 0] = info->bd_addr[3]; > + skb->data[offset + 3] = info->bd_addr[4]; > + skb->data[offset + 2] = info->bd_addr[5]; > + } > + > + for (count = 1; ; count++) { > + BT_DBG("Sending firmware command %d", count); > + init_completion(&info->fw_completion); > + skb_queue_tail(&info->txq, skb); > + spin_lock_irqsave(&info->lock, flags); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + spin_unlock_irqrestore(&info->lock, flags); > + > + skb = skb_dequeue(fw_queue); > + if (!skb) > + break; > + > + if (!wait_for_completion_timeout(&info->fw_completion, > + msecs_to_jiffies(1000))) { > + dev_err(info->dev, "No reply to fw command\n"); > + return -ETIMEDOUT; > + } > + > + if (info->fw_error) { > + dev_err(info->dev, "FW error\n"); > + return -EPROTO; > + } > + }; > + > + /* Wait for chip warm reset */ > + retries = 100; > + while ((!skb_queue_empty(&info->txq) || > + !(hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT)) && > + retries--) { > + msleep(10); > + } > + if (!retries) { > + dev_err(info->dev, "Transmitter not empty\n"); > + return -ETIMEDOUT; > + } > + > + hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE); > + > + if (hci_h4p_wait_for_cts(info, 1, 100)) { > + dev_err(info->dev, "cts didn't deassert after final speed\n"); > + return -ETIMEDOUT; > + } > + > + retries = 100; > + do { > + init_completion(&info->init_completion); > + hci_h4p_send_alive_packet(info); > + retries--; > + } while (!wait_for_completion_timeout(&info->init_completion, 100) && > + retries > 0); > + > + if (!retries) { > + dev_err(info->dev, "No alive reply after speed change\n"); > + return -ETIMEDOUT; > + } > + > + return 0; > +} > diff --git a/drivers/bluetooth/nokia_fw-ti1273.c b/drivers/bluetooth/nokia_fw-ti1273.c > new file mode 100644 > index 0000000..f5500f7 > --- /dev/null > +++ b/drivers/bluetooth/nokia_fw-ti1273.c > @@ -0,0 +1,110 @@ > +/* > + * This file is part of Nokia H4P bluetooth driver > + * > + * Copyright (C) 2009 Nokia Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#include > +#include > +#include > + > +#include "hci_h4p.h" > + > +static struct sk_buff_head *fw_q; > + > +void hci_h4p_ti1273_parse_fw_event(struct hci_h4p_info *info, > + struct sk_buff *skb) > +{ > + struct sk_buff *fw_skb; > + unsigned long flags; > + > + if (skb->data[5] != 0x00) { > + dev_err(info->dev, "Firmware sending command failed 0x%.2x\n", > + skb->data[5]); > + info->fw_error = -EPROTO; > + } > + > + kfree_skb(skb); > + > + fw_skb = skb_dequeue(fw_q); > + if (fw_skb == NULL || info->fw_error) { > + complete(&info->fw_completion); > + return; > + } > + > + skb_queue_tail(&info->txq, fw_skb); > + spin_lock_irqsave(&info->lock, flags); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + spin_unlock_irqrestore(&info->lock, flags); > +} > + > + > +int hci_h4p_ti1273_send_fw(struct hci_h4p_info *info, > + struct sk_buff_head *fw_queue) > +{ > + struct sk_buff *skb; > + unsigned long flags, time; > + > + info->fw_error = 0; > + > + BT_DBG("Sending firmware"); > + > + time = jiffies; > + > + fw_q = fw_queue; > + skb = skb_dequeue(fw_queue); > + if (!skb) > + return -ENODATA; > + > + BT_DBG("Sending commands"); > + /* Check if this is bd_address packet */ > + init_completion(&info->fw_completion); > + hci_h4p_smart_idle(info, 0); > + skb_queue_tail(&info->txq, skb); > + spin_lock_irqsave(&info->lock, flags); > + hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | > + UART_IER_THRI); > + spin_unlock_irqrestore(&info->lock, flags); > + > + if (!wait_for_completion_timeout(&info->fw_completion, > + msecs_to_jiffies(2000))) { > + dev_err(info->dev, "No reply to fw command\n"); > + return -ETIMEDOUT; > + } > + > + if (info->fw_error) { > + dev_err(info->dev, "FW error\n"); > + return -EPROTO; > + } > + > + BT_DBG("Firmware sent in %d msecs", > + jiffies_to_msecs(jiffies-time)); > + > + hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS); > + hci_h4p_set_rts(info, 0); > + hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE); > + if (hci_h4p_wait_for_cts(info, 1, 100)) { > + dev_err(info->dev, > + "cts didn't go down after final speed change\n"); > + return -ETIMEDOUT; > + } > + hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS); > + > + return 0; > +} > diff --git a/drivers/bluetooth/nokia_fw.c b/drivers/bluetooth/nokia_fw.c > new file mode 100644 > index 0000000..cfea61c > --- /dev/null > +++ b/drivers/bluetooth/nokia_fw.c > @@ -0,0 +1,195 @@ > +/* > + * This file is part of hci_h4p bluetooth driver > + * > + * Copyright (C) 2005, 2006 Nokia Corporation. > + * > + * Contact: Ville Tervo > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#include > +#include > +#include > + > +#include > + > +#include "hci_h4p.h" > + > +static int fw_pos; > + > +/* Firmware handling */ > +static int hci_h4p_open_firmware(struct hci_h4p_info *info, > + const struct firmware **fw_entry) > +{ > + int err; > + > + fw_pos = 0; > + BT_DBG("Opening firmware man_id 0x%.2x ver_id 0x%.2x", > + info->man_id, info->ver_id); > + switch (info->man_id) { > + case H4P_ID_TI1271: > + switch (info->ver_id) { > + case 0xe1: > + err = request_firmware(fw_entry, FW_NAME_TI1271_PRELE, > + info->dev); > + break; > + case 0xd1: > + case 0xf1: > + err = request_firmware(fw_entry, FW_NAME_TI1271_LE, > + info->dev); > + break; > + default: > + err = request_firmware(fw_entry, FW_NAME_TI1271, > + info->dev); > + } > + break; > + case H4P_ID_CSR: > + err = request_firmware(fw_entry, FW_NAME_CSR, info->dev); > + break; > + case H4P_ID_BCM2048: > + err = request_firmware(fw_entry, FW_NAME_BCM2048, info->dev); > + break; > + default: > + dev_err(info->dev, "Invalid chip type\n"); > + *fw_entry = NULL; > + err = -EINVAL; > + } > + > + return err; > +} > + > +static void hci_h4p_close_firmware(const struct firmware *fw_entry) > +{ > + release_firmware(fw_entry); > +} > + > +/* Read fw. Return length of the command. If no more commands in > + * fw 0 is returned. In error case return value is negative. > + */ > +static int hci_h4p_read_fw_cmd(struct hci_h4p_info *info, struct sk_buff **skb, > + const struct firmware *fw_entry, gfp_t how) > +{ > + unsigned int cmd_len; > + > + if (fw_pos >= fw_entry->size) > + return 0; > + > + if (fw_pos + 2 > fw_entry->size) { > + dev_err(info->dev, "Corrupted firmware image 1\n"); > + return -EMSGSIZE; > + } > + > + cmd_len = fw_entry->data[fw_pos++]; > + cmd_len += fw_entry->data[fw_pos++] << 8; > + if (cmd_len == 0) > + return 0; > + > + if (fw_pos + cmd_len > fw_entry->size) { > + dev_err(info->dev, "Corrupted firmware image 2\n"); > + return -EMSGSIZE; > + } > + > + *skb = bt_skb_alloc(cmd_len, how); > + if (!*skb) { > + dev_err(info->dev, "Cannot reserve memory for buffer\n"); > + return -ENOMEM; > + } > + memcpy(skb_put(*skb, cmd_len), &fw_entry->data[fw_pos], cmd_len); > + > + fw_pos += cmd_len; > + > + return (*skb)->len; > +} > + > +int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue) > +{ > + const struct firmware *fw_entry = NULL; > + struct sk_buff *skb = NULL; > + int err; > + > + err = hci_h4p_open_firmware(info, &fw_entry); > + if (err < 0 || !fw_entry) > + goto err_clean; > + > + while ((err = hci_h4p_read_fw_cmd(info, &skb, fw_entry, GFP_KERNEL))) { > + if (err < 0 || !skb) > + goto err_clean; > + > + skb_queue_tail(fw_queue, skb); > + } > + > + /* Chip detection code does neg and alive stuff > + * discard two first skbs */ > + skb = skb_dequeue(fw_queue); > + if (!skb) { > + err = -EMSGSIZE; > + goto err_clean; > + } > + kfree_skb(skb); > + skb = skb_dequeue(fw_queue); > + if (!skb) { > + err = -EMSGSIZE; > + goto err_clean; > + } > + kfree_skb(skb); > + > +err_clean: > + hci_h4p_close_firmware(fw_entry); > + return err; > +} > + > +int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue) > +{ > + int err; > + > + switch (info->man_id) { > + case H4P_ID_CSR: > + err = hci_h4p_bc4_send_fw(info, fw_queue); > + break; > + case H4P_ID_TI1271: > + err = hci_h4p_ti1273_send_fw(info, fw_queue); > + break; > + case H4P_ID_BCM2048: > + err = hci_h4p_bcm_send_fw(info, fw_queue); > + break; > + default: > + dev_err(info->dev, "Don't know how to send firmware\n"); > + err = -EINVAL; > + } > + > + return err; > +} > + > +void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb) > +{ > + switch (info->man_id) { > + case H4P_ID_CSR: > + hci_h4p_bc4_parse_fw_event(info, skb); > + break; > + case H4P_ID_TI1271: > + hci_h4p_ti1273_parse_fw_event(info, skb); > + break; > + case H4P_ID_BCM2048: > + hci_h4p_bcm_parse_fw_event(info, skb); > + break; > + default: > + dev_err(info->dev, "Don't know how to parse fw event\n"); > + info->fw_error = -EINVAL; > + } > + > + return; > +} > diff --git a/drivers/bluetooth/nokia_uart.c b/drivers/bluetooth/nokia_uart.c > new file mode 100644 > index 0000000..0fb57de > --- /dev/null > +++ b/drivers/bluetooth/nokia_uart.c > @@ -0,0 +1,199 @@ > +/* > + * This file is part of Nokia H4P bluetooth driver > + * > + * Copyright (C) 2005, 2006 Nokia Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#include > +#include > +#include > + > +#include > + > +#include "hci_h4p.h" > + > +inline void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val) > +{ > + __raw_writeb(val, info->uart_base + (offset << 2)); > +} > + > +inline u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset) > +{ > + return __raw_readb(info->uart_base + (offset << 2)); > +} > + > +void hci_h4p_set_rts(struct hci_h4p_info *info, int active) > +{ > + u8 b; > + > + b = hci_h4p_inb(info, UART_MCR); > + if (active) > + b |= UART_MCR_RTS; > + else > + b &= ~UART_MCR_RTS; > + hci_h4p_outb(info, UART_MCR, b); > +} > + > +int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active, > + int timeout_ms) > +{ > + unsigned long timeout; > + int state; > + > + timeout = jiffies + msecs_to_jiffies(timeout_ms); > + for (;;) { > + state = hci_h4p_inb(info, UART_MSR) & UART_MSR_CTS; > + if (active) { > + if (state) > + return 0; > + } else { > + if (!state) > + return 0; > + } > + if (time_after(jiffies, timeout)) > + return -ETIMEDOUT; > + msleep(1); > + } > +} > + > +void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which) > +{ > + u8 lcr, b; > + > + lcr = hci_h4p_inb(info, UART_LCR); > + hci_h4p_outb(info, UART_LCR, 0xbf); > + b = hci_h4p_inb(info, UART_EFR); > + if (on) > + b |= which; > + else > + b &= ~which; > + hci_h4p_outb(info, UART_EFR, b); > + hci_h4p_outb(info, UART_LCR, lcr); > +} > + > +void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which) > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&info->lock, flags); > + __hci_h4p_set_auto_ctsrts(info, on, which); > + spin_unlock_irqrestore(&info->lock, flags); > +} > + > +void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed) > +{ > + unsigned int divisor; > + u8 lcr, mdr1; > + > + BT_DBG("Setting speed %lu", speed); > + > + if (speed >= 460800) { > + divisor = UART_CLOCK / 13 / speed; > + mdr1 = 3; > + } else { > + divisor = UART_CLOCK / 16 / speed; > + mdr1 = 0; > + } > + > + /* Make sure UART mode is disabled */ > + hci_h4p_outb(info, UART_OMAP_MDR1, 7); > + > + lcr = hci_h4p_inb(info, UART_LCR); > + hci_h4p_outb(info, UART_LCR, UART_LCR_DLAB); /* Set DLAB */ > + hci_h4p_outb(info, UART_DLL, divisor & 0xff); /* Set speed */ > + hci_h4p_outb(info, UART_DLM, divisor >> 8); > + hci_h4p_outb(info, UART_LCR, lcr); > + > + /* Make sure UART mode is enabled */ > + hci_h4p_outb(info, UART_OMAP_MDR1, mdr1); > +} > + > +int hci_h4p_reset_uart(struct hci_h4p_info *info) > +{ > + int count = 0; > + > + /* Reset the UART */ > + hci_h4p_outb(info, UART_OMAP_SYSC, UART_SYSC_OMAP_RESET); > + while (!(hci_h4p_inb(info, UART_OMAP_SYSS) & UART_SYSS_RESETDONE)) { > + if (count++ > 100) { > + dev_err(info->dev, "hci_h4p: UART reset timeout\n"); > + return -ENODEV; > + } > + udelay(1); > + } > + > + return 0; > +} > + > +void hci_h4p_store_regs(struct hci_h4p_info *info) > +{ > + u16 lcr = 0; > + > + lcr = hci_h4p_inb(info, UART_LCR); > + hci_h4p_outb(info, UART_LCR, 0xBF); > + info->dll = hci_h4p_inb(info, UART_DLL); > + info->dlh = hci_h4p_inb(info, UART_DLM); > + info->efr = hci_h4p_inb(info, UART_EFR); > + hci_h4p_outb(info, UART_LCR, lcr); > + info->mdr1 = hci_h4p_inb(info, UART_OMAP_MDR1); > + info->ier = hci_h4p_inb(info, UART_IER); > +} > + > +void hci_h4p_restore_regs(struct hci_h4p_info *info) > +{ > + u16 lcr = 0; > + > + hci_h4p_init_uart(info); > + > + hci_h4p_outb(info, UART_OMAP_MDR1, 7); > + lcr = hci_h4p_inb(info, UART_LCR); > + hci_h4p_outb(info, UART_LCR, 0xBF); > + hci_h4p_outb(info, UART_DLL, info->dll); /* Set speed */ > + hci_h4p_outb(info, UART_DLM, info->dlh); > + hci_h4p_outb(info, UART_EFR, info->efr); > + hci_h4p_outb(info, UART_LCR, lcr); > + hci_h4p_outb(info, UART_OMAP_MDR1, info->mdr1); > + hci_h4p_outb(info, UART_IER, info->ier); > +} > + > +void hci_h4p_init_uart(struct hci_h4p_info *info) > +{ > + u8 mcr, efr; > + > + /* Enable and setup FIFO */ > + hci_h4p_outb(info, UART_OMAP_MDR1, 0x00); > + > + hci_h4p_outb(info, UART_LCR, 0xbf); > + efr = hci_h4p_inb(info, UART_EFR); > + hci_h4p_outb(info, UART_EFR, UART_EFR_ECB); > + hci_h4p_outb(info, UART_LCR, UART_LCR_DLAB); > + mcr = hci_h4p_inb(info, UART_MCR); > + hci_h4p_outb(info, UART_MCR, UART_MCR_TCRTLR); > + hci_h4p_outb(info, UART_FCR, UART_FCR_ENABLE_FIFO | > + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | > + (3 << 6) | (0 << 4)); > + hci_h4p_outb(info, UART_LCR, 0xbf); > + hci_h4p_outb(info, UART_TI752_TLR, 0xed); > + hci_h4p_outb(info, UART_TI752_TCR, 0xef); > + hci_h4p_outb(info, UART_EFR, efr); > + hci_h4p_outb(info, UART_LCR, UART_LCR_DLAB); > + hci_h4p_outb(info, UART_MCR, 0x00); > + hci_h4p_outb(info, UART_LCR, UART_LCR_WLEN8); > + hci_h4p_outb(info, UART_IER, UART_IER_RDI); > + hci_h4p_outb(info, UART_OMAP_SYSC, (1 << 0) | (1 << 2) | (2 << 3)); > +} > diff --git a/include/linux/platform_data/hci-h4p.h b/include/linux/platform_data/hci-h4p.h > new file mode 100644 > index 0000000..30d169d > --- /dev/null > +++ b/include/linux/platform_data/hci-h4p.h > @@ -0,0 +1,38 @@ > +/* > + * This file is part of Nokia H4P bluetooth driver > + * > + * Copyright (C) 2010 Nokia Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > + > +/** > + * struct hci_h4p_platform data - hci_h4p Platform data structure > + */ > +struct hci_h4p_platform_data { > + int chip_type; > + int bt_sysclk; > + unsigned int bt_wakeup_gpio; > + unsigned int host_wakeup_gpio; > + unsigned int reset_gpio; > + int reset_gpio_shared; > + unsigned int uart_irq; > + phys_addr_t uart_base; > + const char *uart_iclk; > + const char *uart_fclk; > + void (*set_pm_limits)(struct device *dev, bool set); > +}; > -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/