Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753487AbaAQTUL (ORCPT ); Fri, 17 Jan 2014 14:20:11 -0500 Received: from mail-ig0-f179.google.com ([209.85.213.179]:52045 "EHLO mail-ig0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753412AbaAQTT7 (ORCPT ); Fri, 17 Jan 2014 14:19:59 -0500 From: Marc Carino To: Christian Daudt , Arnd Bergmann Cc: Florian Fainelli , Matt Porter , Russell King , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Marc Carino Subject: [PATCH v4 3/8] ARM: brcmstb: add debug UART for earlyprintk support Date: Fri, 17 Jan 2014 11:19:22 -0800 Message-Id: <1389986367-4010-4-git-send-email-marc.ceeeee@gmail.com> X-Mailer: git-send-email 1.8.4.4 In-Reply-To: <1389986367-4010-1-git-send-email-marc.ceeeee@gmail.com> References: <1389986367-4010-1-git-send-email-marc.ceeeee@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add the UART definitions needed to support earlyprintk on brcmstb machines. Signed-off-by: Marc Carino Acked-by: Florian Fainelli --- arch/arm/Kconfig.debug | 16 +++++++++++++++- 1 files changed, 15 insertions(+), 1 deletions(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5765abf..266c699 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -94,6 +94,17 @@ choice depends on ARCH_BCM2835 select DEBUG_UART_PL01X + config DEBUG_BRCMSTB_UART + bool "Use BRCMSTB UART for low-level debug" + depends on ARCH_BRCMSTB + select DEBUG_UART_8250 + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + If you have a Broadcom STB chip and would like early print + messages to appear over the UART, select this option. + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -988,6 +999,7 @@ config DEBUG_UART_PHYS default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 + default 0xf0406b00 if DEBUG_BRCMSTB_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 @@ -1029,6 +1041,7 @@ config DEBUG_UART_VIRT default 0xf0009000 if DEBUG_CNS3XXX default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 + default 0xfc406b00 if DEBUG_BRCMSTB_UART default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 @@ -1091,7 +1104,8 @@ config DEBUG_UART_8250_WORD default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 + DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \ + DEBUG_BRCMSTB_UART config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/