Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754145AbaAULD6 (ORCPT ); Tue, 21 Jan 2014 06:03:58 -0500 Received: from smtp1.it.da.ut.ee ([193.40.5.66]:51212 "EHLO smtp1.it.da.ut.ee" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754021AbaAULDx (ORCPT ); Tue, 21 Jan 2014 06:03:53 -0500 X-Greylist: delayed 1764 seconds by postgrey-1.27 at vger.kernel.org; Tue, 21 Jan 2014 06:03:52 EST Date: Tue, 21 Jan 2014 12:34:24 +0200 (EET) From: Meelis Roos To: Linux Kernel list Subject: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88 Message-ID: User-Agent: Alpine 1.00 (SOC 882 2007-12-20) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org My HP DL585 G1 gets a the following BUG on module load with 3.13. Have not noticed it with any earlier kernel, including 3.13-rc8. BUG: unable to handle kernel paging request at 00000000b4343e88 This is somewhat reproducible - on second boot, it was ordered differently with respect to other boot messages. Second dmesg is also below. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0 (mroos@dl585) (gcc version 4.7.2 (Debian 4.7.2-5) ) #45 SMP Tue Jan 21 11:57:29 EET 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfff67ff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfff6800-0x00000000bfffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000fdc00000-0x00000000fdc00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fdc10000-0x00000000fdc10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fdc20000-0x00000000fdc20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fdc30000-0x00000000fdc30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ffffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: HP ProLiant DL585 G1, BIOS A01 02/14/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x3fffff max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FFC0000000 write-back [ 0.000000] 1 base 0000000000 mask FF80000000 write-back [ 0.000000] 2 base 0100000000 mask FF00000000 write-back [ 0.000000] 3 base 0200000000 mask FE00000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfff6 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02106000, 0x02106fff] PGTABLE [ 0.000000] BRK [0x02107000, 0x02107fff] PGTABLE [ 0.000000] BRK [0x02108000, 0x02108fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3ffc00000-0x3ffdfffff] [ 0.000000] [mem 0x3ffc00000-0x3ffdfffff] page 2M [ 0.000000] BRK [0x02109000, 0x02109fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3fc000000-0x3ffbfffff] [ 0.000000] [mem 0x3fc000000-0x3ffbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x380000000-0x3fbffffff] [ 0.000000] [mem 0x380000000-0x3fbffffff] page 2M [ 0.000000] BRK [0x0210a000, 0x0210afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfff5fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbfff5fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x37fffffff] [ 0.000000] [mem 0x100000000-0x37fffffff] page 2M [ 0.000000] BRK [0x0210b000, 0x0210bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3ffe00000-0x3ffffefff] [ 0.000000] [mem 0x3ffe00000-0x3ffffefff] page 4k [ 0.000000] ACPI: RSDP 00000000000f4f20 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000bfff6c00 000044 (v01 HP A01 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: FACP 00000000bfff6c80 0000F4 (v03 HP A01 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131115/tbfadt-653) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1bControlBlock: 32, using default 16 (20131115/tbfadt-653) [ 0.000000] ACPI: DSDT 00000000bfff6d80 0051D5 (v01 HP DSDT 00000001 MSFT 02000001) [ 0.000000] ACPI: FACS 00000000bfff68c0 000040 [ 0.000000] ACPI: APIC 00000000bfff6900 0000D0 (v01 HP 00000083 00000002 00000000) [ 0.000000] ACPI: SPCR 00000000bfff6a00 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: SRAT 00000000bfff6a80 000150 (v01 HP A01 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 1 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 0x01 -> Node 1 [ 0.000000] SRAT: PXM 3 -> APIC 0x02 -> Node 2 [ 0.000000] SRAT: PXM 4 -> APIC 0x03 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xffffffff] [ 0.000000] SRAT: Node 1 PXM 2 [mem 0x100000000-0x1ffffffff] [ 0.000000] SRAT: Node 2 PXM 3 [mem 0x200000000-0x2ffffffff] [ 0.000000] SRAT: Node 3 PXM 4 [mem 0x300000000-0x3ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xffffffff] [ 0.000000] NODE_DATA [mem 0xbfff3000-0xbfff5fff] [ 0.000000] Initmem setup node 1 [mem 0x100000000-0x1ffffffff] [ 0.000000] NODE_DATA [mem 0x1ffffd000-0x1ffffffff] [ 0.000000] Initmem setup node 2 [mem 0x200000000-0x2ffffffff] [ 0.000000] NODE_DATA [mem 0x2ffffd000-0x2ffffffff] [ 0.000000] Initmem setup node 3 [mem 0x300000000-0x3ffffefff] [ 0.000000] NODE_DATA [mem 0x3ffffc000-0x3ffffefff] [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bce00000-ffff8800bfdfffff] on node 0 [ 0.000000] [ffffea0004000000-ffffea0007ffffff] PMD -> [ffff8801fbe00000-ffff8801ffdfffff] on node 1 [ 0.000000] [ffffea0008000000-ffffea000bffffff] PMD -> [ffff8802fbe00000-ffff8802ffdfffff] on node 2 [ 0.000000] [ffffea000c000000-ffffea000fffffff] PMD -> [ffff8803fb400000-ffff8803ff3fffff] on node 3 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x3ffffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbfff5fff] [ 0.000000] node 1: [mem 0x100000000-0x1ffffffff] [ 0.000000] node 2: [mem 0x200000000-0x2ffffffff] [ 0.000000] node 3: [mem 0x300000000-0x3ffffefff] [ 0.000000] On node 0 totalpages: 786324 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12224 pages used for memmap [ 0.000000] DMA32 zone: 782326 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 2 totalpages: 1048576 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 3 totalpages: 1048575 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048575 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec10000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec20000, GSI 28-31 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32]) [ 0.000000] IOAPIC[3]: apic_id 7, version 17, address 0xfdc00000, GSI 32-35 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36]) [ 0.000000] IOAPIC[4]: apic_id 8, version 17, address 0xfdc10000, GSI 36-39 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfdc20000] gsi_base[40]) [ 0.000000] IOAPIC[5]: apic_id 9, version 17, address 0xfdc20000, GSI 40-43 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfdc30000] gsi_base[44]) [ 0.000000] IOAPIC[6]: apic_id 10, version 17, address 0xfdc30000, GSI 44-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfff6000-0xbfff6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfff7000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfdbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc00000-0xfdc00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc01000-0xfdc0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc10000-0xfdc10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc11000-0xfdc1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc20000-0xfdc20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc21000-0xfdc2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc30000-0xfdc30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc31000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfdbfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:4 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bcc00000 s76032 r8192 d22272 u1048576 [ 0.000000] pcpu-alloc: s76032 r8192 d22272 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 4 [1] 1 5 [2] 2 6 [3] 3 7 [ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 3870590 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ fc3e000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 15332028K/15728204K available (6233K kernel code, 2939K rwdata, 1276K rodata, 872K init, 3348K bss, 396176K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:4352 nr_irqs:1152 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 62914560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2197.041 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.012227] Calibrating delay loop (skipped), value calculated using timer frequency.. 4394.08 BogoMIPS (lpj=8788164) [ 0.012655] pid_max: default: 32768 minimum: 301 [ 0.015382] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032886] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.041065] Mount-cache hash table entries: 256 [ 0.041702] Initializing cgroup subsys memory [ 0.041931] Initializing cgroup subsys devices [ 0.042138] Initializing cgroup subsys freezer [ 0.042346] Initializing cgroup subsys net_cls [ 0.042549] Initializing cgroup subsys blkio [ 0.042755] Initializing cgroup subsys perf_event [ 0.042965] Initializing cgroup subsys hugetlb [ 0.043212] tseg: 0000000000 [ 0.043227] mce: CPU supports 5 MCE banks [ 0.043455] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.043455] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.043455] tlb_flushall_shift: 4 [ 0.044068] Freeing SMP alternatives memory: 20K (ffffffff81dba000 - ffffffff81dbf000) [ 0.044404] ACPI: Core revision 20131115 [ 0.048403] ACPI: All ACPI Tables successfully acquired [ 0.049673] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.089566] smpboot: CPU0: AMD Opteron (tm) Processor 848 (fam: 0f, model: 05, stepping: 08) [ 0.092000] Performance Events: AMD PMU driver. [ 0.092000] ... version: 0 [ 0.092000] ... bit width: 48 [ 0.092000] ... generic registers: 4 [ 0.092000] ... value mask: 0000ffffffffffff [ 0.092000] ... max period: 00007fffffffffff [ 0.092000] ... fixed-purpose events: 0 [ 0.092000] ... event mask: 000000000000000f [ 0.092000] x86: Booting SMP configuration: [ 0.101933] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.092000] .... node #1, CPUs: #1 [ 0.180576] .... node #2, CPUs: #2 [ 0.268542] .... node #3, CPUs: #3 [ 0.356220] x86: Booted up 4 nodes, 4 CPUs [ 0.356539] smpboot: Total of 4 processors activated (17577.77 BogoMIPS) [ 0.358680] devtmpfs: initialized [ 0.358680] gcov: version magic: 0x3430372a [ 0.360280] NET: Registered protocol family 16 [ 0.360584] cpuidle: using governor ladder [ 0.360752] cpuidle: using governor menu [ 0.360925] node 0 link 0: io port [1000, 5fff] [ 0.360929] node 1 link 0: io port [6000, ffff] [ 0.360931] TOM: 00000000c0000000 aka 3072M [ 0.361100] node 0 link 0: mmio [f5f00000, f7ffffff] [ 0.361105] node 0 link 0: mmio [f5e00000, f5efffff] [ 0.361108] node 0 link 0: mmio [a0000, bffff] [ 0.361111] node 0 link 0: mmio [fe000000, ffffffff] [ 0.361113] node 1 link 0: mmio [f8000000, fdffffff] [ 0.361116] TOM2: 0000000400000000 aka 16384M [ 0.361289] bus: [bus 00-03] on node 0 link 0 [ 0.361291] bus: 00 [io 0x0000-0x5fff] [ 0.361293] bus: 00 [mem 0xc0000000-0xf7ffffff] [ 0.361295] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.361297] bus: 00 [mem 0xfe000000-0xffffffff] [ 0.361299] bus: 00 [mem 0x400000000-0xfcffffffff] [ 0.361301] bus: [bus 04-08] on node 1 link 0 [ 0.361302] bus: 04 [io 0x6000-0xffff] [ 0.361304] bus: 04 [mem 0xf8000000-0xfdffffff] [ 0.361321] ACPI: bus type PCI registered [ 0.361547] PCI: Using configuration type 1 for base access [ 0.361922] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.362098] mtrr: probably your BIOS does not setup all CPUs. [ 0.362272] mtrr: corrected configuration. [ 0.363094] bio: create slab at 0 [ 0.363094] ACPI: Added _OSI(Module Device) [ 0.364016] ACPI: Added _OSI(Processor Device) [ 0.364186] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.364355] ACPI: Added _OSI(Processor Aggregator Device) [ 0.369476] ACPI: Interpreter enabled [ 0.369653] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.370053] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.370451] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580) [ 0.370859] ACPI: (supports S0 S4 S5) [ 0.371025] ACPI: Using IOAPIC for interrupt routing [ 0.371240] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.379134] ACPI: PCI Root Bridge [CFG0] (domain 0000 [bus 00-03]) [ 0.379326] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.379507] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.381434] acpi PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored) [ 0.381438] acpi PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored) [ 0.381441] acpi PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored) [ 0.381444] acpi PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored) [ 0.381446] acpi PNP0A03:00: host bridge window [io 0x1000-0x5fff] (ignored) [ 0.381450] acpi PNP0A03:00: host bridge window [mem 0xf5f00000-0xf7ffffff] (ignored) [ 0.381453] acpi PNP0A03:00: host bridge window [mem 0xf5e00000-0xf5efffff] (ignored) [ 0.381456] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.381460] PCI: root bus 00: hardware-probed resources [ 0.381471] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.381830] PCI host bridge to bus 0000:00 [ 0.382001] pci_bus 0000:00: root bus resource [bus 00-03] [ 0.382175] pci_bus 0000:00: root bus resource [io 0x0000-0x5fff] [ 0.382352] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff] [ 0.382532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.382712] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xffffffff] [ 0.382892] pci_bus 0000:00: root bus resource [mem 0x400000000-0xfcffffffff] [ 0.383098] pci 0000:00:03.0: [1022:7460] type 01 class 0x060400 [ 0.383261] pci 0000:00:04.0: [1022:7468] type 00 class 0x060100 [ 0.383386] pci 0000:00:04.1: [1022:7469] type 00 class 0x01018a [ 0.383423] pci 0000:00:04.1: reg 0x20: [io 0x2000-0x200f] [ 0.383504] pci 0000:00:04.3: [1022:746b] type 00 class 0x068000 [ 0.383638] pci 0000:00:07.0: [1022:7450] type 01 class 0x060400 [ 0.383748] pci 0000:00:07.1: [1022:7451] type 00 class 0x080010 [ 0.383852] pci 0000:00:08.0: [1022:7450] type 01 class 0x060400 [ 0.383959] pci 0000:00:08.1: [1022:7451] type 00 class 0x080010 [ 0.384098] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.384186] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.384257] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.384329] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.384406] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 [ 0.384496] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 [ 0.384570] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 [ 0.384637] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 [ 0.384723] pci 0000:00:1a.0: [1022:1100] type 00 class 0x060000 [ 0.384810] pci 0000:00:1a.1: [1022:1101] type 00 class 0x060000 [ 0.384885] pci 0000:00:1a.2: [1022:1102] type 00 class 0x060000 [ 0.384959] pci 0000:00:1a.3: [1022:1103] type 00 class 0x060000 [ 0.385031] pci 0000:00:1b.0: [1022:1100] type 00 class 0x060000 [ 0.385117] pci 0000:00:1b.1: [1022:1101] type 00 class 0x060000 [ 0.385188] pci 0000:00:1b.2: [1022:1102] type 00 class 0x060000 [ 0.385263] pci 0000:00:1b.3: [1022:1103] type 00 class 0x060000 [ 0.385404] pci 0000:01:00.0: [1022:7464] type 00 class 0x0c0310 [ 0.385421] pci 0000:01:00.0: reg 0x10: [mem 0xf7ef0000-0xf7ef0fff] [ 0.385534] pci 0000:01:00.1: [1022:7464] type 00 class 0x0c0310 [ 0.385550] pci 0000:01:00.1: reg 0x10: [mem 0xf7ee0000-0xf7ee0fff] [ 0.385679] pci 0000:01:02.0: [0e11:b203] type 00 class 0x088000 [ 0.385700] pci 0000:01:02.0: reg 0x10: [io 0x4800-0x48ff] [ 0.385712] pci 0000:01:02.0: reg 0x14: [mem 0xf7eb0000-0xf7eb01ff] [ 0.385855] pci 0000:01:02.2: [0e11:b204] type 00 class 0x088000 [ 0.385878] pci 0000:01:02.2: reg 0x10: [io 0x4000-0x40ff] [ 0.385891] pci 0000:01:02.2: reg 0x14: [mem 0xf7ea0000-0xf7ea07ff] [ 0.385904] pci 0000:01:02.2: reg 0x18: [mem 0xf7e90000-0xf7e91fff] [ 0.385917] pci 0000:01:02.2: reg 0x1c: [mem 0xf7e00000-0xf7e7ffff] [ 0.385951] pci 0000:01:02.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.385988] pci 0000:01:02.2: PME# supported from D0 D3hot D3cold [ 0.386073] pci 0000:01:03.0: [1002:4752] type 00 class 0x030000 [ 0.386093] pci 0000:01:03.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.386106] pci 0000:01:03.0: reg 0x14: [io 0x4400-0x44ff] [ 0.386118] pci 0000:01:03.0: reg 0x18: [mem 0xf5ff0000-0xf5ff0fff] [ 0.386159] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.386194] pci 0000:01:03.0: supports D1 D2 [ 0.386288] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.386464] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 0.386469] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff] [ 0.386538] pci 0000:02:04.0: [0e11:b178] type 00 class 0x010400 [ 0.386558] pci 0000:02:04.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit] [ 0.386566] pci 0000:02:04.0: reg 0x18: [io 0x5000-0x50ff] [ 0.386577] pci 0000:02:04.0: reg 0x1c: [mem 0xf5ef0000-0xf5ef3fff 64bit pref] [ 0.386590] pci 0000:02:04.0: reg 0x30: [mem 0x00000000-0x00003fff pref] [ 0.386620] pci 0000:02:04.0: supports D1 [ 0.386695] pci 0000:02:06.0: [14e4:1648] type 00 class 0x020000 [ 0.386711] pci 0000:02:06.0: reg 0x10: [mem 0xf7fb0000-0xf7fbffff 64bit] [ 0.386768] pci 0000:02:06.0: PME# supported from D3hot D3cold [ 0.386837] pci 0000:02:06.1: [14e4:1648] type 00 class 0x020000 [ 0.386853] pci 0000:02:06.1: reg 0x10: [mem 0xf7fa0000-0xf7faffff 64bit] [ 0.386910] pci 0000:02:06.1: PME# supported from D3hot D3cold [ 0.386997] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.387173] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.387177] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.387182] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref] [ 0.387348] pci 0000:00:08.0: PCI bridge to [bus 03] [ 0.388612] ACPI: PCI Root Bridge [CFG1] (domain 0000 [bus 04-08]) [ 0.388793] acpi PNP0A03:01: _OSC: OS supports [Segments MSI] [ 0.388972] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.390613] acpi PNP0A03:01: host bridge window [io 0x6000-0xffff] (ignored) [ 0.390616] PCI: root bus 04: hardware-probed resources [ 0.390621] acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.390962] PCI host bridge to bus 0000:04 [ 0.391131] pci_bus 0000:04: root bus resource [bus 04-08] [ 0.391305] pci_bus 0000:04: root bus resource [io 0x6000-0xffff] [ 0.391482] pci_bus 0000:04: root bus resource [mem 0xf8000000-0xfdffffff] [ 0.391681] pci 0000:04:09.0: [1022:7450] type 01 class 0x060400 [ 0.391794] pci 0000:04:09.1: [1022:7451] type 00 class 0x080010 [ 0.391899] pci 0000:04:0a.0: [1022:7450] type 01 class 0x060400 [ 0.392014] pci 0000:04:0a.1: [1022:7451] type 00 class 0x080010 [ 0.392127] pci 0000:04:0b.0: [1022:7450] type 01 class 0x060400 [ 0.392227] pci 0000:04:0b.1: [1022:7451] type 00 class 0x080010 [ 0.392315] pci 0000:04:0c.0: [1022:7450] type 01 class 0x060400 [ 0.392409] pci 0000:04:0c.1: [1022:7451] type 00 class 0x080010 [ 0.392633] pci 0000:04:09.0: PCI bridge to [bus 05] [ 0.392931] pci 0000:04:0a.0: PCI bridge to [bus 06] [ 0.393259] pci 0000:04:0b.0: PCI bridge to [bus 07] [ 0.393578] pci 0000:04:0c.0: PCI bridge to [bus 08] [ 0.393996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *7 10 11) [ 0.394642] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 *10 11) [ 0.395284] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 *11) [ 0.395926] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11) [ 0.396645] ACPI: \_SB_.CFG0: notify handler is installed [ 0.396671] ACPI: \_SB_.CFG1: notify handler is installed [ 0.396703] Found 2 acpi root devices [ 0.396870] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none [ 0.396870] vgaarb: loaded [ 0.396870] vgaarb: bridge control possible 0000:01:03.0 [ 0.396870] SCSI subsystem initialized [ 0.397002] PCI: Using ACPI for IRQ routing [ 0.397172] PCI: pci_cache_line_size set to 64 bytes [ 0.397260] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.397265] e820: reserve RAM buffer [mem 0xbfff6800-0xbfffffff] [ 0.397267] e820: reserve RAM buffer [mem 0x3fffff000-0x3ffffffff] [ 0.397563] Switched to clocksource refined-jiffies [ 0.397563] pnp: PnP ACPI init [ 0.397563] ACPI: bus type PNP registered [ 0.397563] system 00:00: [io 0x0230-0x0233] has been reserved [ 0.397563] system 00:00: [io 0x0260-0x0267] has been reserved [ 0.400014] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.400197] system 00:00: [io 0x0800-0x081f] has been reserved [ 0.400377] system 00:00: [io 0x0900-0x0903] has been reserved [ 0.400559] system 00:00: [io 0x0904-0x0907] has been reserved [ 0.400740] system 00:00: [io 0x0908-0x090b] has been reserved [ 0.400921] system 00:00: [io 0x090c-0x092e] has been reserved [ 0.401103] system 00:00: [io 0x092f] has been reserved [ 0.401281] system 00:00: [io 0x0930-0x09ff] has been reserved [ 0.401462] system 00:00: [io 0x0c80-0x0c87] has been reserved [ 0.401644] system 00:00: [io 0x0cf9] could not be reserved [ 0.401824] system 00:00: [io 0x02f8-0x02ff] has been reserved [ 0.402012] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.402034] pnp 00:01: [dma 7] [ 0.402070] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.402106] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.402179] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.402225] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.402264] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.402536] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.402733] pnp 00:07: [dma 2] [ 0.402784] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.403034] pnp: PnP ACPI: found 8 devices [ 0.403207] ACPI: bus type PNP unregistered [ 0.410262] Switched to clocksource acpi_pm [ 0.410262] pci 0000:00:03.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref] [ 0.410262] pci 0000:01:03.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] [ 0.410262] pci 0000:01:02.2: BAR 6: assigned [mem 0xc0020000-0xc002ffff pref] [ 0.410262] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.410262] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 0.410262] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff] [ 0.410262] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xc00fffff pref] [ 0.410262] pci 0000:02:04.0: BAR 6: assigned [mem 0xf5e00000-0xf5e03fff pref] [ 0.410385] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.410564] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.410746] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.410933] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref] [ 0.411218] pci 0000:00:08.0: PCI bridge to [bus 03] [ 0.411402] pci_bus 0000:00: resource 4 [io 0x0000-0x5fff] [ 0.411406] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xf7ffffff] [ 0.411409] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.411412] pci_bus 0000:00: resource 7 [mem 0xfe000000-0xffffffff] [ 0.411415] pci_bus 0000:00: resource 8 [mem 0x400000000-0xfcffffffff] [ 0.411418] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.411421] pci_bus 0000:01: resource 1 [mem 0xf5f00000-0xf7efffff] [ 0.411424] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc00fffff pref] [ 0.411427] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.411430] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.411433] pci_bus 0000:02: resource 2 [mem 0xf5e00000-0xf5efffff 64bit pref] [ 0.411464] pci 0000:04:09.0: PCI bridge to [bus 05] [ 0.411649] pci 0000:04:0a.0: PCI bridge to [bus 06] [ 0.411833] pci 0000:04:0b.0: PCI bridge to [bus 07] [ 0.412032] pci 0000:04:0c.0: PCI bridge to [bus 08] [ 0.412215] pci_bus 0000:04: resource 4 [io 0x6000-0xffff] [ 0.412218] pci_bus 0000:04: resource 5 [mem 0xf8000000-0xfdffffff] [ 0.412380] NET: Registered protocol family 2 [ 0.413090] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.414480] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.415517] TCP: Hash tables configured (established 131072 bind 65536) [ 0.415825] TCP: reno registered [ 0.416137] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.416605] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.417201] NET: Registered protocol family 1 [ 0.417418] pci 0000:00:04.3: boot interrupts on device [1022:746b] already disabled [ 0.417706] pci 0000:00:07.0: MSI quirk detected; subordinate MSI disabled [ 0.417892] pci 0000:00:07.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.418082] pci 0000:00:08.0: MSI quirk detected; subordinate MSI disabled [ 0.418268] pci 0000:00:08.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.560094] pci 0000:01:03.0: Boot video device [ 0.560111] pci 0000:04:09.0: MSI quirk detected; subordinate MSI disabled [ 0.560304] pci 0000:04:09.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.560535] pci 0000:04:0a.0: MSI quirk detected; subordinate MSI disabled [ 0.560760] pci 0000:04:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.560993] pci 0000:04:0b.0: MSI quirk detected; subordinate MSI disabled [ 0.561218] pci 0000:04:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.561451] pci 0000:04:0c.0: MSI quirk detected; subordinate MSI disabled [ 0.561668] pci 0000:04:0c.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.561896] PCI: CLS 64 bytes, default 64 [ 0.564784] PCI-DMA: Disabling AGP. [ 0.565374] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.565552] PCI-DMA: using GART IOMMU. [ 0.565727] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.575606] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.593214] gcov: could not create file [ 0.659644] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.664181] msgmni has been set to 30074 [ 0.664751] cryptomgr_test (65) used greatest stack depth: 7224 bytes left [ 0.664991] cryptomgr_test (66) used greatest stack depth: 6840 bytes left [ 0.665329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.665624] io scheduler noop registered [ 0.665791] io scheduler deadline registered [ 0.666017] io scheduler cfq registered (default) [ 0.666305] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.666614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.666895] ACPI: Power Button [PWRF] [ 0.667116] ACPI: processor limited to max C-state 1 [ 0.667510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.688224] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.730243] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.731109] Linux agpgart interface v0.103 [ 0.731298] HP CISS Driver (v 3.6.26) [ 0.731839] cciss 0000:02:04.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date. [ 0.872416] cciss 0000:02:04.0: cciss0: <0xb178> at PCI 0000:02:04.0 IRQ 18 using DAC [ 0.877382] cciss/c0d0: p1 p2 < p5 > [ 0.878191] scsi0 : cciss [ 0.878585] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.880785] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.880994] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.881387] mousedev: PS/2 mouse device common for all mice [ 0.881739] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.882205] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.882524] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram [ 0.882997] TCP: cubic registered [ 0.883414] NET: Registered protocol family 10 [ 0.883936] NET: Registered protocol family 17 [ 0.884175] Key type dns_resolver registered [ 0.884741] registered taskstats version 1 [ 0.887179] rtc_cmos rtc_cmos: setting system clock to 2014-01-21 10:31:39 UTC (1390300299) [ 0.933094] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.941431] EXT4-fs (cciss!c0d0p1): couldn't mount as ext3 due to feature incompatibilities [ 0.942217] EXT4-fs (cciss!c0d0p1): couldn't mount as ext2 due to feature incompatibilities [ 0.953652] EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts: (null) [ 0.954025] VFS: Mounted root (ext4 filesystem) readonly on device 104:1. [ 0.969624] devtmpfs: mounted [ 0.971649] Freeing unused kernel memory: 872K (ffffffff81ce0000 - ffffffff81dba000) [ 0.971936] Write protecting the kernel read-only data: 10240k [ 0.979810] Freeing unused kernel memory: 1912K (ffff880001622000 - ffff880001800000) [ 0.983189] Freeing unused kernel memory: 772K (ffff88000193f000 - ffff880001a00000) [ 1.408114] modprobe (80) used greatest stack depth: 4616 bytes left [ 2.155425] udevd[198]: starting version 175 [ 2.416089] shpchp 0000:00:07.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.416394] shpchp 0000:00:07.0: Cannot reserve MMIO region [ 2.416689] shpchp 0000:00:08.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.416987] shpchp 0000:00:08.0: Cannot reserve MMIO region [ 2.417342] shpchp 0000:04:09.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.417690] shpchp 0000:04:09.0: Cannot reserve MMIO region [ 2.417972] shpchp 0000:04:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.418265] shpchp 0000:04:0a.0: Cannot reserve MMIO region [ 2.418470] shpchp 0000:04:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.418761] shpchp 0000:04:0b.0: Cannot reserve MMIO region [ 2.418959] shpchp 0000:04:0c.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.419253] shpchp 0000:04:0c.0: Cannot reserve MMIO region [ 2.419515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.425824] ioapic: probe of 0000:00:07.1 failed with error -22 [ 2.427377] ioapic: probe of 0000:00:08.1 failed with error -22 [ 2.427607] ioapic: probe of 0000:04:09.1 failed with error -22 [ 2.427809] ioapic: probe of 0000:04:0a.1 failed with error -22 [ 2.428098] ioapic: probe of 0000:04:0b.1 failed with error -22 [ 2.428300] ioapic: probe of 0000:04:0c.1 failed with error -22 [ 2.449575] libata version 3.00 loaded. [ 2.453281] AMD768 RNG detected [ 2.454634] pata_amd 0000:00:04.1: version 0.4.1 [ 2.470241] scsi1 : pata_amd [ 2.484421] scsi2 : pata_amd [ 2.484862] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14 [ 2.485093] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15 [ 2.504619] hpwdt 0000:01:02.0: This server does not have an iLO2+ ASIC. [ 2.523020] pps_core: LinuxPPS API ver. 1 registered [ 2.523242] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.548143] ACPI: bus type USB registered [ 2.548486] usbcore: registered new interface driver usbfs [ 2.548730] usbcore: registered new interface driver hub [ 2.555879] usbcore: registered new device driver usb [ 2.567628] PTP clock support registered [ 2.594803] tg3.c:v3.134 (Sep 16, 2013) [ 2.606767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.617386] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 2.634146] BUG: unable to handle kernel paging request at 00000000b4343e88 [ 2.634499] IP: [] wake_up_process+0xb/0x50 [ 2.634766] PGD 0 [ 2.635009] Oops: 0000 [#1] SMP [ 2.635210] Floppy drive(s): fd0 is 1.44M [ 2.635718] Modules linked in: floppy(+) edac_core(+) pcspkr k8temp(+) ehci_hcd tg3(+) ptp usbcore pps_core libphy hpwdt hpilo usb_common i2c_amd756 i2c_core pata_amd amd_rng libata ioapic evdev shpchp [ 2.636037] CPU: 2 PID: 368 Comm: modprobe Not tainted 3.13.0 #45 [ 2.636037] Hardware name: HP ProLiant DL585 G1, BIOS A01 02/14/2007 [ 2.636037] task: ffff8803f981c400 ti: ffff8803f98be000 task.ti: ffff8803f98be000 [ 2.636037] RIP: 0010:[] [] wake_up_process+0xb/0x50 [ 2.636037] RSP: 0018:ffff8803f98bfd78 EFLAGS: 00010206 [ 2.636037] RAX: ffffffff81ba70c0 RBX: 00000000b4343e88 RCX: 00000000000010cd [ 2.636037] RDX: ffffffff81ac40a8 RSI: 00000000000149a0 RDI: 00000000b4343e88 [ 2.636037] RBP: ffffffffa0231958 R08: 00000000000149a0 R09: ffff8802fbc149a0 [ 2.636037] R10: ffffea0007e73980 R11: ffff8800b8803b00 R12: ffffffffa0231940 [ 2.636037] R13: ffff8803f98bfe78 R14: 0000000000000000 R15: 0000000000000000 [ 2.636037] FS: 00007f375b73a700(0000) GS:ffff8802fbc00000(0000) knlGS:0000000000000000 [ 2.636037] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2.636037] CR2: 00000000b4343e88 CR3: 00000000bc337000 CR4: 00000000000007e0 [ 2.636037] Stack: [ 2.636037] ffffffff81ac40a0 ffffffff81607663 ffffffffa0230400 ffffffff8160772b [ 2.636037] 0000000000000000 ffffffff81110ac5 0000000000000004 ffffffff810f7b2b [ 2.636037] ffffffff810f4000 0000000000000000 0000000000000000 ffffffff00000003 [ 2.636037] Call Trace: [ 2.636037] [] ? __mutex_unlock_slowpath+0x53/0x80 [ 2.636037] [] ? mutex_unlock+0x2b/0x40 [ 2.636037] [] ? __gcov_init+0x65/0xb0 [ 2.636037] [] ? load_module+0x223b/0x2710 [ 2.636037] [] ? get_modinfo.isra.35+0x110/0x110 [ 2.636037] [] ? page_fault+0x22/0x30 [ 2.636037] [] ? SyS_init_module+0xee/0x140 [ 2.636037] [] ? tracesys+0xd4/0xd9 [ 2.649431] tg3 0000:02:06.0 eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e3 [ 2.649435] tg3 0000:02:06.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.649438] tg3 0000:02:06.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0] [ 2.649441] tg3 0000:02:06.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 2.636037] Code: 48 83 ec 08 31 d2 48 ff 05 13 58 da 00 e8 ae fb ff ff 48 ff 05 0f 58 da 00 48 83 c4 08 c3 66 90 48 ff 05 a9 54 da 00 53 48 89 fb <48> 8b 07 a8 0c 75 18 48 89 df 31 d2 be 03 00 00 00 e8 7f fb ff [ 2.651880] FDC 0 is a National Semiconductor PC87306 [ 2.650994] RIP [] wake_up_process+0xb/0x50 [ 2.650994] RSP [ 2.650994] CR2: 00000000b4343e88 [ 2.653524] ---[ end trace 1c83e7195a307878 ]--- [ 2.705936] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.707494] ohci-pci: OHCI PCI platform driver [ 2.708957] tg3 0000:02:06.1 eth1: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e2 [ 2.709270] tg3 0000:02:06.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.709581] tg3 0000:02:06.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.709858] tg3 0000:02:06.1 eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 2.710323] ohci-pci 0000:01:00.0: OHCI PCI host controller [ 2.710525] ohci-pci 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 2.710884] ohci-pci 0000:01:00.0: irq 19, io mem 0xf7ef0000 [ 2.764430] ata1.00: ATAPI: COMPAQ CD-ROM SN-124, N104, max PIO4 [ 2.766281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.766512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.766858] usb usb1: Product: OHCI PCI host controller [ 2.767073] usb usb1: Manufacturer: Linux 3.13.0 ohci_hcd [ 2.767293] usb usb1: SerialNumber: 0000:01:00.0 [ 2.767948] hub 1-0:1.0: USB hub found [ 2.768245] hub 1-0:1.0: 3 ports detected [ 2.769201] ohci-pci 0000:01:00.1: OHCI PCI host controller [ 2.769398] ohci-pci 0000:01:00.1: new USB bus registered, assigned bus number 2 [ 2.769723] ohci-pci 0000:01:00.1: irq 19, io mem 0xf7ee0000 [ 2.774138] ata1.00: configured for PIO4 [ 2.777134] scsi 1:0:0:0: CD-ROM COMPAQ CD-ROM SN-124 N104 PQ: 0 ANSI: 5 [ 2.778189] ata2: port disabled--ignoring [ 2.826315] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.826519] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.826812] usb usb2: Product: OHCI PCI host controller [ 2.826989] usb usb2: Manufacturer: Linux 3.13.0 ohci_hcd [ 2.827187] usb usb2: SerialNumber: 0000:01:00.1 [ 2.827811] hub 2-0:1.0: USB hub found [ 2.829783] hub 2-0:1.0: 3 ports detected [ 2.848876] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 2.849088] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.849653] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.904261] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 3.114130] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 3.270271] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4 [ 63.829832] random: nonblocking pool is initialized [ 64.340712] Adding 2927612k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2927612k [ 64.366248] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: (null) [ 64.507995] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: errors=remount-ro [ 64.715372] loop: module loaded [ 66.167305] ip (1882) used greatest stack depth: 4264 bytes left [ 66.692131] RPC: Registered named UNIX socket transport module. [ 66.692442] RPC: Registered udp transport module. [ 66.692620] RPC: Registered tcp transport module. [ 66.692796] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 66.725621] FS-Cache: Loaded [ 66.768870] FS-Cache: Netfs 'nfs' registered for caching [ 66.830715] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 66.889416] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 68.357541] powernow-k8: Power state transitions not supported [ 68.357762] powernow-k8: Power state transitions not supported [ 68.357984] powernow-k8: Power state transitions not supported [ 68.358210] powernow-k8: Power state transitions not supported [ 68.560384] tg3 0000:02:06.0 eth0: Link is up at 100 Mbps, full duplex [ 68.560579] tg3 0000:02:06.0 eth0: Flow control is on for TX and on for RX [ 68.560864] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready =================================================================== [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0 (mroos@dl585) (gcc version 4.7.2 (Debian 4.7.2-5) ) #45 SMP Tue Jan 21 11:57:29 EET 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfff67ff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfff6800-0x00000000bfffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000fdc00000-0x00000000fdc00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fdc10000-0x00000000fdc10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fdc20000-0x00000000fdc20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fdc30000-0x00000000fdc30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ffffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: HP ProLiant DL585 G1, BIOS A01 02/14/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x3fffff max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FFC0000000 write-back [ 0.000000] 1 base 0000000000 mask FF80000000 write-back [ 0.000000] 2 base 0100000000 mask FF00000000 write-back [ 0.000000] 3 base 0200000000 mask FE00000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfff6 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02106000, 0x02106fff] PGTABLE [ 0.000000] BRK [0x02107000, 0x02107fff] PGTABLE [ 0.000000] BRK [0x02108000, 0x02108fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3ffc00000-0x3ffdfffff] [ 0.000000] [mem 0x3ffc00000-0x3ffdfffff] page 2M [ 0.000000] BRK [0x02109000, 0x02109fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3fc000000-0x3ffbfffff] [ 0.000000] [mem 0x3fc000000-0x3ffbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x380000000-0x3fbffffff] [ 0.000000] [mem 0x380000000-0x3fbffffff] page 2M [ 0.000000] BRK [0x0210a000, 0x0210afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfff5fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbfff5fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x37fffffff] [ 0.000000] [mem 0x100000000-0x37fffffff] page 2M [ 0.000000] BRK [0x0210b000, 0x0210bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3ffe00000-0x3ffffefff] [ 0.000000] [mem 0x3ffe00000-0x3ffffefff] page 4k [ 0.000000] ACPI: RSDP 00000000000f4f20 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000bfff6c00 000044 (v01 HP A01 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: FACP 00000000bfff6c80 0000F4 (v03 HP A01 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131115/tbfadt-653) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1bControlBlock: 32, using default 16 (20131115/tbfadt-653) [ 0.000000] ACPI: DSDT 00000000bfff6d80 0051D5 (v01 HP DSDT 00000001 MSFT 02000001) [ 0.000000] ACPI: FACS 00000000bfff68c0 000040 [ 0.000000] ACPI: APIC 00000000bfff6900 0000D0 (v01 HP 00000083 00000002 00000000) [ 0.000000] ACPI: SPCR 00000000bfff6a00 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: SRAT 00000000bfff6a80 000150 (v01 HP A01 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 1 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 0x01 -> Node 1 [ 0.000000] SRAT: PXM 3 -> APIC 0x02 -> Node 2 [ 0.000000] SRAT: PXM 4 -> APIC 0x03 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xffffffff] [ 0.000000] SRAT: Node 1 PXM 2 [mem 0x100000000-0x1ffffffff] [ 0.000000] SRAT: Node 2 PXM 3 [mem 0x200000000-0x2ffffffff] [ 0.000000] SRAT: Node 3 PXM 4 [mem 0x300000000-0x3ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xffffffff] [ 0.000000] NODE_DATA [mem 0xbfff3000-0xbfff5fff] [ 0.000000] Initmem setup node 1 [mem 0x100000000-0x1ffffffff] [ 0.000000] NODE_DATA [mem 0x1ffffd000-0x1ffffffff] [ 0.000000] Initmem setup node 2 [mem 0x200000000-0x2ffffffff] [ 0.000000] NODE_DATA [mem 0x2ffffd000-0x2ffffffff] [ 0.000000] Initmem setup node 3 [mem 0x300000000-0x3ffffefff] [ 0.000000] NODE_DATA [mem 0x3ffffc000-0x3ffffefff] [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bce00000-ffff8800bfdfffff] on node 0 [ 0.000000] [ffffea0004000000-ffffea0007ffffff] PMD -> [ffff8801fbe00000-ffff8801ffdfffff] on node 1 [ 0.000000] [ffffea0008000000-ffffea000bffffff] PMD -> [ffff8802fbe00000-ffff8802ffdfffff] on node 2 [ 0.000000] [ffffea000c000000-ffffea000fffffff] PMD -> [ffff8803fb400000-ffff8803ff3fffff] on node 3 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x3ffffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbfff5fff] [ 0.000000] node 1: [mem 0x100000000-0x1ffffffff] [ 0.000000] node 2: [mem 0x200000000-0x2ffffffff] [ 0.000000] node 3: [mem 0x300000000-0x3ffffefff] [ 0.000000] On node 0 totalpages: 786324 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12224 pages used for memmap [ 0.000000] DMA32 zone: 782326 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 2 totalpages: 1048576 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 3 totalpages: 1048575 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048575 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec10000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec20000, GSI 28-31 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32]) [ 0.000000] IOAPIC[3]: apic_id 7, version 17, address 0xfdc00000, GSI 32-35 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36]) [ 0.000000] IOAPIC[4]: apic_id 8, version 17, address 0xfdc10000, GSI 36-39 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfdc20000] gsi_base[40]) [ 0.000000] IOAPIC[5]: apic_id 9, version 17, address 0xfdc20000, GSI 40-43 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfdc30000] gsi_base[44]) [ 0.000000] IOAPIC[6]: apic_id 10, version 17, address 0xfdc30000, GSI 44-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfff6000-0xbfff6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfff7000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfdbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc00000-0xfdc00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc01000-0xfdc0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc10000-0xfdc10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc11000-0xfdc1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc20000-0xfdc20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc21000-0xfdc2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc30000-0xfdc30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdc31000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfdbfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:4 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bcc00000 s76032 r8192 d22272 u1048576 [ 0.000000] pcpu-alloc: s76032 r8192 d22272 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 4 [1] 1 5 [2] 2 6 [3] 3 7 [ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 3870590 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 15332028K/15728204K available (6233K kernel code, 2939K rwdata, 1276K rodata, 872K init, 3348K bss, 396176K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:4352 nr_irqs:1152 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 62914560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2197.164 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.012231] Calibrating delay loop (skipped), value calculated using timer frequency.. 4394.32 BogoMIPS (lpj=8788656) [ 0.012648] pid_max: default: 32768 minimum: 301 [ 0.015311] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032957] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.041188] Mount-cache hash table entries: 256 [ 0.041829] Initializing cgroup subsys memory [ 0.042069] Initializing cgroup subsys devices [ 0.042280] Initializing cgroup subsys freezer [ 0.042491] Initializing cgroup subsys net_cls [ 0.042692] Initializing cgroup subsys blkio [ 0.042897] Initializing cgroup subsys perf_event [ 0.043107] Initializing cgroup subsys hugetlb [ 0.043352] tseg: 0000000000 [ 0.043367] mce: CPU supports 5 MCE banks [ 0.043592] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.043592] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.043592] tlb_flushall_shift: 4 [ 0.044110] Freeing SMP alternatives memory: 20K (ffffffff81dba000 - ffffffff81dbf000) [ 0.044460] ACPI: Core revision 20131115 [ 0.048571] ACPI: All ACPI Tables successfully acquired [ 0.049828] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.089731] smpboot: CPU0: AMD Opteron (tm) Processor 848 (fam: 0f, model: 05, stepping: 08) [ 0.092000] Performance Events: AMD PMU driver. [ 0.092000] ... version: 0 [ 0.092000] ... bit width: 48 [ 0.092000] ... generic registers: 4 [ 0.092000] ... value mask: 0000ffffffffffff [ 0.092000] ... max period: 00007fffffffffff [ 0.092000] ... fixed-purpose events: 0 [ 0.092000] ... event mask: 000000000000000f [ 0.092000] x86: Booting SMP configuration: [ 0.101942] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.092000] .... node #1, CPUs: #1 [ 0.180565] .... node #2, CPUs: #2 [ 0.268498] .... node #3, CPUs: #3 [ 0.356178] x86: Booted up 4 nodes, 4 CPUs [ 0.356498] smpboot: Total of 4 processors activated (17578.03 BogoMIPS) [ 0.358634] devtmpfs: initialized [ 0.358634] gcov: version magic: 0x3430372a [ 0.360275] NET: Registered protocol family 16 [ 0.360588] cpuidle: using governor ladder [ 0.360757] cpuidle: using governor menu [ 0.360931] node 0 link 0: io port [1000, 5fff] [ 0.360935] node 1 link 0: io port [6000, ffff] [ 0.360938] TOM: 00000000c0000000 aka 3072M [ 0.361108] node 0 link 0: mmio [f5f00000, f7ffffff] [ 0.361113] node 0 link 0: mmio [f5e00000, f5efffff] [ 0.361116] node 0 link 0: mmio [a0000, bffff] [ 0.361119] node 0 link 0: mmio [fe000000, ffffffff] [ 0.361121] node 1 link 0: mmio [f8000000, fdffffff] [ 0.361124] TOM2: 0000000400000000 aka 16384M [ 0.361296] bus: [bus 00-03] on node 0 link 0 [ 0.361298] bus: 00 [io 0x0000-0x5fff] [ 0.361300] bus: 00 [mem 0xc0000000-0xf7ffffff] [ 0.361302] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.361304] bus: 00 [mem 0xfe000000-0xffffffff] [ 0.361306] bus: 00 [mem 0x400000000-0xfcffffffff] [ 0.361308] bus: [bus 04-08] on node 1 link 0 [ 0.361309] bus: 04 [io 0x6000-0xffff] [ 0.361311] bus: 04 [mem 0xf8000000-0xfdffffff] [ 0.361328] ACPI: bus type PCI registered [ 0.361554] PCI: Using configuration type 1 for base access [ 0.361934] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.362110] mtrr: probably your BIOS does not setup all CPUs. [ 0.362284] mtrr: corrected configuration. [ 0.363135] bio: create slab at 0 [ 0.363135] ACPI: Added _OSI(Module Device) [ 0.364011] ACPI: Added _OSI(Processor Device) [ 0.364181] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.364351] ACPI: Added _OSI(Processor Aggregator Device) [ 0.369593] ACPI: Interpreter enabled [ 0.369770] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.370171] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.370569] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580) [ 0.370977] ACPI: (supports S0 S4 S5) [ 0.371142] ACPI: Using IOAPIC for interrupt routing [ 0.371362] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.379391] ACPI: PCI Root Bridge [CFG0] (domain 0000 [bus 00-03]) [ 0.379579] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.379760] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.381558] acpi PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored) [ 0.381561] acpi PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored) [ 0.381564] acpi PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored) [ 0.381567] acpi PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored) [ 0.381570] acpi PNP0A03:00: host bridge window [io 0x1000-0x5fff] (ignored) [ 0.381573] acpi PNP0A03:00: host bridge window [mem 0xf5f00000-0xf7ffffff] (ignored) [ 0.381576] acpi PNP0A03:00: host bridge window [mem 0xf5e00000-0xf5efffff] (ignored) [ 0.381579] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.381583] PCI: root bus 00: hardware-probed resources [ 0.381594] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.381955] PCI host bridge to bus 0000:00 [ 0.382127] pci_bus 0000:00: root bus resource [bus 00-03] [ 0.382302] pci_bus 0000:00: root bus resource [io 0x0000-0x5fff] [ 0.382481] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff] [ 0.382661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.382841] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xffffffff] [ 0.383022] pci_bus 0000:00: root bus resource [mem 0x400000000-0xfcffffffff] [ 0.383227] pci 0000:00:03.0: [1022:7460] type 01 class 0x060400 [ 0.383391] pci 0000:00:04.0: [1022:7468] type 00 class 0x060100 [ 0.383517] pci 0000:00:04.1: [1022:7469] type 00 class 0x01018a [ 0.383555] pci 0000:00:04.1: reg 0x20: [io 0x2000-0x200f] [ 0.383635] pci 0000:00:04.3: [1022:746b] type 00 class 0x068000 [ 0.383773] pci 0000:00:07.0: [1022:7450] type 01 class 0x060400 [ 0.383882] pci 0000:00:07.1: [1022:7451] type 00 class 0x080010 [ 0.383989] pci 0000:00:08.0: [1022:7450] type 01 class 0x060400 [ 0.384112] pci 0000:00:08.1: [1022:7451] type 00 class 0x080010 [ 0.384235] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.384331] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.384402] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.384474] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.384551] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 [ 0.384642] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 [ 0.384715] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 [ 0.384785] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 [ 0.384871] pci 0000:00:1a.0: [1022:1100] type 00 class 0x060000 [ 0.384963] pci 0000:00:1a.1: [1022:1101] type 00 class 0x060000 [ 0.385038] pci 0000:00:1a.2: [1022:1102] type 00 class 0x060000 [ 0.385113] pci 0000:00:1a.3: [1022:1103] type 00 class 0x060000 [ 0.385189] pci 0000:00:1b.0: [1022:1100] type 00 class 0x060000 [ 0.385278] pci 0000:00:1b.1: [1022:1101] type 00 class 0x060000 [ 0.385354] pci 0000:00:1b.2: [1022:1102] type 00 class 0x060000 [ 0.385428] pci 0000:00:1b.3: [1022:1103] type 00 class 0x060000 [ 0.385574] pci 0000:01:00.0: [1022:7464] type 00 class 0x0c0310 [ 0.385590] pci 0000:01:00.0: reg 0x10: [mem 0xf7ef0000-0xf7ef0fff] [ 0.385707] pci 0000:01:00.1: [1022:7464] type 00 class 0x0c0310 [ 0.385724] pci 0000:01:00.1: reg 0x10: [mem 0xf7ee0000-0xf7ee0fff] [ 0.385852] pci 0000:01:02.0: [0e11:b203] type 00 class 0x088000 [ 0.385873] pci 0000:01:02.0: reg 0x10: [io 0x4800-0x48ff] [ 0.385885] pci 0000:01:02.0: reg 0x14: [mem 0xf7eb0000-0xf7eb01ff] [ 0.386029] pci 0000:01:02.2: [0e11:b204] type 00 class 0x088000 [ 0.386052] pci 0000:01:02.2: reg 0x10: [io 0x4000-0x40ff] [ 0.386065] pci 0000:01:02.2: reg 0x14: [mem 0xf7ea0000-0xf7ea07ff] [ 0.386078] pci 0000:01:02.2: reg 0x18: [mem 0xf7e90000-0xf7e91fff] [ 0.386091] pci 0000:01:02.2: reg 0x1c: [mem 0xf7e00000-0xf7e7ffff] [ 0.386125] pci 0000:01:02.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.386162] pci 0000:01:02.2: PME# supported from D0 D3hot D3cold [ 0.386251] pci 0000:01:03.0: [1002:4752] type 00 class 0x030000 [ 0.386271] pci 0000:01:03.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.386284] pci 0000:01:03.0: reg 0x14: [io 0x4400-0x44ff] [ 0.386296] pci 0000:01:03.0: reg 0x18: [mem 0xf5ff0000-0xf5ff0fff] [ 0.386338] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.386372] pci 0000:01:03.0: supports D1 D2 [ 0.386466] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.386642] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 0.386647] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff] [ 0.386716] pci 0000:02:04.0: [0e11:b178] type 00 class 0x010400 [ 0.386736] pci 0000:02:04.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit] [ 0.386743] pci 0000:02:04.0: reg 0x18: [io 0x5000-0x50ff] [ 0.386754] pci 0000:02:04.0: reg 0x1c: [mem 0xf5ef0000-0xf5ef3fff 64bit pref] [ 0.386767] pci 0000:02:04.0: reg 0x30: [mem 0x00000000-0x00003fff pref] [ 0.386798] pci 0000:02:04.0: supports D1 [ 0.386870] pci 0000:02:06.0: [14e4:1648] type 00 class 0x020000 [ 0.386886] pci 0000:02:06.0: reg 0x10: [mem 0xf7fb0000-0xf7fbffff 64bit] [ 0.386944] pci 0000:02:06.0: PME# supported from D3hot D3cold [ 0.387015] pci 0000:02:06.1: [14e4:1648] type 00 class 0x020000 [ 0.387030] pci 0000:02:06.1: reg 0x10: [mem 0xf7fa0000-0xf7faffff 64bit] [ 0.387088] pci 0000:02:06.1: PME# supported from D3hot D3cold [ 0.387173] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.387348] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.387352] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.387357] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref] [ 0.387526] pci 0000:00:08.0: PCI bridge to [bus 03] [ 0.388748] ACPI: PCI Root Bridge [CFG1] (domain 0000 [bus 04-08]) [ 0.388929] acpi PNP0A03:01: _OSC: OS supports [Segments MSI] [ 0.389108] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.390650] acpi PNP0A03:01: host bridge window [io 0x6000-0xffff] (ignored) [ 0.390654] PCI: root bus 04: hardware-probed resources [ 0.390659] acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.391001] PCI host bridge to bus 0000:04 [ 0.391172] pci_bus 0000:04: root bus resource [bus 04-08] [ 0.391347] pci_bus 0000:04: root bus resource [io 0x6000-0xffff] [ 0.391525] pci_bus 0000:04: root bus resource [mem 0xf8000000-0xfdffffff] [ 0.391724] pci 0000:04:09.0: [1022:7450] type 01 class 0x060400 [ 0.391844] pci 0000:04:09.1: [1022:7451] type 00 class 0x080010 [ 0.391951] pci 0000:04:0a.0: [1022:7450] type 01 class 0x060400 [ 0.392075] pci 0000:04:0a.1: [1022:7451] type 00 class 0x080010 [ 0.392184] pci 0000:04:0b.0: [1022:7450] type 01 class 0x060400 [ 0.392287] pci 0000:04:0b.1: [1022:7451] type 00 class 0x080010 [ 0.392380] pci 0000:04:0c.0: [1022:7450] type 01 class 0x060400 [ 0.392476] pci 0000:04:0c.1: [1022:7451] type 00 class 0x080010 [ 0.392707] pci 0000:04:09.0: PCI bridge to [bus 05] [ 0.393008] pci 0000:04:0a.0: PCI bridge to [bus 06] [ 0.393347] pci 0000:04:0b.0: PCI bridge to [bus 07] [ 0.393678] pci 0000:04:0c.0: PCI bridge to [bus 08] [ 0.394104] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *7 10 11) [ 0.394753] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 *10 11) [ 0.395398] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 *11) [ 0.396061] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11) [ 0.396781] ACPI: \_SB_.CFG0: notify handler is installed [ 0.396809] ACPI: \_SB_.CFG1: notify handler is installed [ 0.396843] Found 2 acpi root devices [ 0.397011] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none [ 0.397011] vgaarb: loaded [ 0.397011] vgaarb: bridge control possible 0000:01:03.0 [ 0.397011] SCSI subsystem initialized [ 0.397011] PCI: Using ACPI for IRQ routing [ 0.397180] PCI: pci_cache_line_size set to 64 bytes [ 0.397263] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.397267] e820: reserve RAM buffer [mem 0xbfff6800-0xbfffffff] [ 0.397270] e820: reserve RAM buffer [mem 0x3fffff000-0x3ffffffff] [ 0.397568] Switched to clocksource refined-jiffies [ 0.397568] pnp: PnP ACPI init [ 0.397568] ACPI: bus type PNP registered [ 0.397568] system 00:00: [io 0x0230-0x0233] has been reserved [ 0.400016] system 00:00: [io 0x0260-0x0267] has been reserved [ 0.400197] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.400380] system 00:00: [io 0x0800-0x081f] has been reserved [ 0.400561] system 00:00: [io 0x0900-0x0903] has been reserved [ 0.400743] system 00:00: [io 0x0904-0x0907] has been reserved [ 0.400924] system 00:00: [io 0x0908-0x090b] has been reserved [ 0.401105] system 00:00: [io 0x090c-0x092e] has been reserved [ 0.401287] system 00:00: [io 0x092f] has been reserved [ 0.401465] system 00:00: [io 0x0930-0x09ff] has been reserved [ 0.401646] system 00:00: [io 0x0c80-0x0c87] has been reserved [ 0.401829] system 00:00: [io 0x0cf9] could not be reserved [ 0.402010] system 00:00: [io 0x02f8-0x02ff] has been reserved [ 0.402196] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.402220] pnp 00:01: [dma 7] [ 0.402256] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.402293] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.402367] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.402416] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.402457] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.402738] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.402942] pnp 00:07: [dma 2] [ 0.402991] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.403243] pnp: PnP ACPI: found 8 devices [ 0.403417] ACPI: bus type PNP unregistered [ 0.410520] Switched to clocksource acpi_pm [ 0.410520] pci 0000:00:03.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref] [ 0.410520] pci 0000:01:03.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] [ 0.410520] pci 0000:01:02.2: BAR 6: assigned [mem 0xc0020000-0xc002ffff pref] [ 0.410520] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.410520] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 0.410520] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff] [ 0.410520] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xc00fffff pref] [ 0.410520] pci 0000:02:04.0: BAR 6: assigned [mem 0xf5e00000-0xf5e03fff pref] [ 0.410520] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.410569] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.410751] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.410937] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref] [ 0.411221] pci 0000:00:08.0: PCI bridge to [bus 03] [ 0.411405] pci_bus 0000:00: resource 4 [io 0x0000-0x5fff] [ 0.411408] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xf7ffffff] [ 0.411411] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.411414] pci_bus 0000:00: resource 7 [mem 0xfe000000-0xffffffff] [ 0.411417] pci_bus 0000:00: resource 8 [mem 0x400000000-0xfcffffffff] [ 0.411421] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.411424] pci_bus 0000:01: resource 1 [mem 0xf5f00000-0xf7efffff] [ 0.411427] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc00fffff pref] [ 0.411430] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.411433] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.411436] pci_bus 0000:02: resource 2 [mem 0xf5e00000-0xf5efffff 64bit pref] [ 0.411467] pci 0000:04:09.0: PCI bridge to [bus 05] [ 0.411652] pci 0000:04:0a.0: PCI bridge to [bus 06] [ 0.411835] pci 0000:04:0b.0: PCI bridge to [bus 07] [ 0.412032] pci 0000:04:0c.0: PCI bridge to [bus 08] [ 0.412216] pci_bus 0000:04: resource 4 [io 0x6000-0xffff] [ 0.412220] pci_bus 0000:04: resource 5 [mem 0xf8000000-0xfdffffff] [ 0.412380] NET: Registered protocol family 2 [ 0.413110] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.414497] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.415512] TCP: Hash tables configured (established 131072 bind 65536) [ 0.415838] TCP: reno registered [ 0.416150] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.416624] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.417223] NET: Registered protocol family 1 [ 0.417442] pci 0000:00:04.3: boot interrupts on device [1022:746b] already disabled [ 0.417728] pci 0000:00:07.0: MSI quirk detected; subordinate MSI disabled [ 0.417915] pci 0000:00:07.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.418105] pci 0000:00:08.0: MSI quirk detected; subordinate MSI disabled [ 0.418289] pci 0000:00:08.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.560095] pci 0000:01:03.0: Boot video device [ 0.560112] pci 0000:04:09.0: MSI quirk detected; subordinate MSI disabled [ 0.560300] pci 0000:04:09.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.560492] pci 0000:04:0a.0: MSI quirk detected; subordinate MSI disabled [ 0.560676] pci 0000:04:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.560867] pci 0000:04:0b.0: MSI quirk detected; subordinate MSI disabled [ 0.561052] pci 0000:04:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.561243] pci 0000:04:0c.0: MSI quirk detected; subordinate MSI disabled [ 0.561428] pci 0000:04:0c.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.561616] PCI: CLS 64 bytes, default 64 [ 0.564484] PCI-DMA: Disabling AGP. [ 0.564940] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.565119] PCI-DMA: using GART IOMMU. [ 0.565296] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.574274] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.591848] gcov: could not create file [ 0.658982] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.663476] msgmni has been set to 30074 [ 0.664056] cryptomgr_test (65) used greatest stack depth: 7224 bytes left [ 0.664348] cryptomgr_test (66) used greatest stack depth: 6824 bytes left [ 0.664687] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.665046] io scheduler noop registered [ 0.665244] io scheduler deadline registered [ 0.665512] io scheduler cfq registered (default) [ 0.665833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.666188] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.666526] ACPI: Power Button [PWRF] [ 0.666786] ACPI: processor limited to max C-state 1 [ 0.667228] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.688025] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.730748] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.731611] Linux agpgart interface v0.103 [ 0.731801] HP CISS Driver (v 3.6.26) [ 0.732407] cciss 0000:02:04.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date. [ 0.852930] cciss 0000:02:04.0: cciss0: <0xb178> at PCI 0000:02:04.0 IRQ 18 using DAC [ 0.857656] cciss/c0d0: p1 p2 < p5 > [ 0.858450] scsi0 : cciss [ 0.858840] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.861580] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.861800] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.862190] mousedev: PS/2 mouse device common for all mice [ 0.862509] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.862955] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.863277] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram [ 0.863739] TCP: cubic registered [ 0.864217] NET: Registered protocol family 10 [ 0.864734] NET: Registered protocol family 17 [ 0.864924] Key type dns_resolver registered [ 0.865492] registered taskstats version 1 [ 0.867897] rtc_cmos rtc_cmos: setting system clock to 2014-01-21 10:38:13 UTC (1390300693) [ 0.913701] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.922173] EXT4-fs (cciss!c0d0p1): couldn't mount as ext3 due to feature incompatibilities [ 0.922965] EXT4-fs (cciss!c0d0p1): couldn't mount as ext2 due to feature incompatibilities [ 0.935319] EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts: (null) [ 0.935627] VFS: Mounted root (ext4 filesystem) readonly on device 104:1. [ 0.951380] devtmpfs: mounted [ 0.953292] Freeing unused kernel memory: 872K (ffffffff81ce0000 - ffffffff81dba000) [ 0.953579] Write protecting the kernel read-only data: 10240k [ 0.961249] Freeing unused kernel memory: 1912K (ffff880001622000 - ffff880001800000) [ 0.964585] Freeing unused kernel memory: 772K (ffff88000193f000 - ffff880001a00000) [ 1.368522] modprobe (80) used greatest stack depth: 4616 bytes left [ 2.127804] udevd[198]: starting version 175 [ 2.406772] AMD768 RNG detected [ 2.418385] BUG: unable to handle kernel paging request at 00000000b4343e88 [ 2.418723] IP: [] wake_up_process+0xb/0x50 [ 2.418981] PGD 0 [ 2.419197] ioapic: probe of 0000:00:07.1 failed with error -22 [ 2.419315] ioapic: probe of 0000:00:08.1 failed with error -22 [ 2.419583] Oops: 0000 [#1] SMP [ 2.419879] Modules linked in: ioapic(+) i2c_core(+) amd_rng evdev [ 2.420351] CPU: 1 PID: 281 Comm: modprobe Not tainted 3.13.0 #45 [ 2.420351] Hardware name: HP ProLiant DL585 G1, BIOS A01 02/14/2007 [ 2.420351] task: ffff8800bc403300 ti: ffff8800b31d2000 task.ti: ffff8800b31d2000 [ 2.420351] RIP: 0010:[] [] wake_up_process+0xb/0x50 [ 2.420351] RSP: 0018:ffff8800b31d3d78 EFLAGS: 00010202 [ 2.420351] RAX: ffffffff81ba70c0 RBX: 00000000b4343e88 RCX: 0000000000000c89 [ 2.420351] RDX: ffffffff81ac40a8 RSI: 00000000000149a0 RDI: 00000000b4343e88 [ 2.420351] RBP: ffffffffa000b038 R08: 00000000000149a0 R09: ffff8801fbc149a0 [ 2.420351] R10: ffffea0007e76480 R11: ffff8800b8803b00 R12: ffffffffa000b020 [ 2.420351] R13: ffff8800b31d3e78 R14: 0000000000000000 R15: 0000000000000000 [ 2.420351] FS: 00007f24c6b1b700(0000) GS:ffff8801fbc00000(0000) knlGS:0000000000000000 [ 2.420351] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2.422955] CR2: 00000000b4343e88 CR3: 00000001f9dad000 CR4: 00000000000007e0 [ 2.422955] Stack: [ 2.422955] ffffffff81ac40a0 ffffffff81607663 ffffffffa0009260 ffffffff8160772b [ 2.422955] 0000000000000000 ffffffff81110ac5 0000000000000000 ffffffff810f7b2b [ 2.422955] ffffffff810f4000 0000000000000000 0000000000000000 ffffffff00000003 [ 2.422955] Call Trace: [ 2.422955] [] ? __mutex_unlock_slowpath+0x53/0x80 [ 2.422955] [] ? mutex_unlock+0x2b/0x40 [ 2.422955] [] ? __gcov_init+0x65/0xb0 [ 2.422955] [] ? load_module+0x223b/0x2710 [ 2.422955] [] ? get_modinfo.isra.35+0x110/0x110 [ 2.422955] [] ? page_fault+0x22/0x30 [ 2.422955] [] ? SyS_init_module+0xee/0x140 [ 2.422955] [] ? tracesys+0xd4/0xd9 [ 2.422955] Code: 48 83 ec 08 31 d2 48 ff 05 13 58 da 00 e8 ae fb ff ff 48 ff 05 0f 58 da 00 48 83 c4 08 c3 66 90 48 ff 05 a9 54 da 00 53 48 89 fb <48> 8b 07 a8 0c 75 18 48 89 df 31 d2 be 03 00 00 00 e8 7f fb ff [ 2.429521] RIP [] wake_up_process+0xb/0x50 [ 2.429521] RSP [ 2.429521] CR2: 00000000b4343e88 [ 2.431890] ---[ end trace 0a363fc577f200bc ]--- [ 2.437265] ioapic: probe of 0000:04:09.1 failed with error -22 [ 2.437635] ioapic: probe of 0000:04:0a.1 failed with error -22 [ 2.437878] ioapic: probe of 0000:04:0b.1 failed with error -22 [ 2.438076] ioapic: probe of 0000:04:0c.1 failed with error -22 [ 2.457220] libata version 3.00 loaded. [ 2.468706] pata_amd 0000:00:04.1: version 0.4.1 [ 2.472980] scsi1 : pata_amd [ 2.475770] scsi2 : pata_amd [ 2.476105] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14 [ 2.476290] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15 [ 2.479315] shpchp 0000:00:07.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.479620] shpchp 0000:00:07.0: Cannot reserve MMIO region [ 2.479837] shpchp 0000:00:08.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.480206] shpchp 0000:00:08.0: Cannot reserve MMIO region [ 2.480682] shpchp 0000:04:09.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.481030] shpchp 0000:04:09.0: Cannot reserve MMIO region [ 2.481336] shpchp 0000:04:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.481632] shpchp 0000:04:0a.0: Cannot reserve MMIO region [ 2.481839] shpchp 0000:04:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.482133] shpchp 0000:04:0b.0: Cannot reserve MMIO region [ 2.482334] shpchp 0000:04:0c.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 2.482622] shpchp 0000:04:0c.0: Cannot reserve MMIO region [ 2.482878] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.514443] Floppy drive(s): fd0 is 1.44M [ 2.553238] hpwdt 0000:01:02.0: This server does not have an iLO2+ ASIC. [ 2.557128] FDC 0 is a National Semiconductor PC87306 [ 2.571647] pps_core: LinuxPPS API ver. 1 registered [ 2.571855] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.579664] PTP clock support registered [ 2.582727] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 2.606762] tg3.c:v3.134 (Sep 16, 2013) [ 2.628580] EDAC MC: Ver: 3.0.0 [ 2.663683] tg3 0000:02:06.0 eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e3 [ 2.663978] tg3 0000:02:06.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.664288] tg3 0000:02:06.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0] [ 2.664566] tg3 0000:02:06.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 2.691072] ACPI: bus type USB registered [ 2.691494] usbcore: registered new interface driver usbfs [ 2.691765] usbcore: registered new interface driver hub [ 2.692281] usbcore: registered new device driver usb [ 2.714797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.720380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.724330] tg3 0000:02:06.1 eth1: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e2 [ 2.724632] tg3 0000:02:06.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.724918] tg3 0000:02:06.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.725197] tg3 0000:02:06.1 eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 2.752381] ata1.00: ATAPI: COMPAQ CD-ROM SN-124, N104, max PIO4 [ 2.768267] ata1.00: configured for PIO4 [ 2.769278] scsi 1:0:0:0: CD-ROM COMPAQ CD-ROM SN-124 N104 PQ: 0 ANSI: 5 [ 2.770300] ata2: port disabled--ignoring [ 2.793159] ohci-pci: OHCI PCI platform driver [ 2.793616] ohci-pci 0000:01:00.0: OHCI PCI host controller [ 2.793810] ohci-pci 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 2.794149] ohci-pci 0000:01:00.0: irq 19, io mem 0xf7ef0000 [ 2.799683] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 2.799885] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.800383] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.810962] MCE: In-kernel MCE decoding enabled. [ 2.849243] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 2.850833] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.851058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.851338] usb usb1: Product: OHCI PCI host controller [ 2.851515] usb usb1: Manufacturer: Linux 3.13.0 ohci_hcd [ 2.851693] usb usb1: SerialNumber: 0000:01:00.0 [ 2.854488] hub 1-0:1.0: USB hub found [ 2.854748] hub 1-0:1.0: 3 ports detected [ 2.855773] ohci-pci 0000:01:00.1: OHCI PCI host controller [ 2.855976] ohci-pci 0000:01:00.1: new USB bus registered, assigned bus number 2 [ 2.856385] ohci-pci 0000:01:00.1: irq 19, io mem 0xf7ee0000 [ 2.856446] AMD64 EDAC driver v3.4.0 [ 2.858498] EDAC amd64: DRAM ECC enabled. [ 2.858676] EDAC amd64: K8 revE or earlier detected (node 0). [ 2.859122] EDAC amd64: CS6: Registered Double data rate SDRAM [ 2.859308] EDAC amd64: CS7: Registered Double data rate SDRAM [ 2.859725] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) [ 2.860220] EDAC amd64: DRAM ECC enabled. [ 2.860445] EDAC amd64: K8 revE or earlier detected (node 1). [ 2.860738] EDAC amd64: CS6: Registered Double data rate SDRAM [ 2.860930] EDAC amd64: CS7: Registered Double data rate SDRAM [ 2.861457] EDAC MC1: Giving out device to module amd64_edac controller K8: DEV 0000:00:19.2 (INTERRUPT) [ 2.861874] EDAC amd64: DRAM ECC enabled. [ 2.862102] EDAC amd64: K8 revE or earlier detected (node 2). [ 2.862430] EDAC amd64: CS6: Registered Double data rate SDRAM [ 2.862625] EDAC amd64: CS7: Registered Double data rate SDRAM [ 2.863354] EDAC MC2: Giving out device to module amd64_edac controller K8: DEV 0000:00:1a.2 (INTERRUPT) [ 2.865352] EDAC amd64: DRAM ECC enabled. [ 2.865566] EDAC amd64: K8 revE or earlier detected (node 3). [ 2.865879] EDAC amd64: CS6: Registered Double data rate SDRAM [ 2.866081] EDAC amd64: CS7: Registered Double data rate SDRAM [ 2.866595] EDAC MC3: Giving out device to module amd64_edac controller K8: DEV 0000:00:1b.2 (INTERRUPT) [ 2.868712] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) [ 2.914360] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.914593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.914890] usb usb2: Product: OHCI PCI host controller [ 2.915102] usb usb2: Manufacturer: Linux 3.13.0 ohci_hcd [ 2.915291] usb usb2: SerialNumber: 0000:01:00.1 [ 2.915858] hub 2-0:1.0: USB hub found [ 2.916158] hub 2-0:1.0: 3 ports detected [ 2.917434] modprobe (351) used greatest stack depth: 4424 bytes left [ 3.106874] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 3.263036] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4 [ 3.684663] random: nonblocking pool is initialized [ 3.810175] Adding 2927612k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2927612k [ 3.837569] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: (null) [ 3.973001] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: errors=remount-ro [ 4.167126] loop: module loaded [ 5.620763] ip (1514) used greatest stack depth: 4264 bytes left [ 6.106409] RPC: Registered named UNIX socket transport module. [ 6.106690] RPC: Registered udp transport module. [ 6.106873] RPC: Registered tcp transport module. [ 6.107049] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.127667] FS-Cache: Loaded [ 6.170867] FS-Cache: Netfs 'nfs' registered for caching [ 6.236861] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.548432] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.839665] powernow-k8: Power state transitions not supported [ 7.839877] powernow-k8: Power state transitions not supported [ 7.840108] powernow-k8: Power state transitions not supported [ 7.840348] powernow-k8: Power state transitions not supported [ 8.130772] tg3 0000:02:06.0 eth0: Link is up at 100 Mbps, full duplex [ 8.130966] tg3 0000:02:06.0 eth0: Flow control is on for TX and on for RX [ 8.131198] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready -- Meelis Roos (mroos@linux.ee) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/