Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752107AbaA2LQM (ORCPT ); Wed, 29 Jan 2014 06:16:12 -0500 Received: from top.free-electrons.com ([176.31.233.9]:59633 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750970AbaA2LPI (ORCPT ); Wed, 29 Jan 2014 06:15:08 -0500 From: Maxime Ripard To: Mark Brown , Mike Turquette , Emilio Lopez Cc: linux-sunxi@googlegroups.com, linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, kevin.z.m.zh@gmail.com, sunny@allwinnertech.com, shuge@allwinnertech.com, zhuzhenhua@allwinnertech.com, Maxime Ripard Subject: [PATCH v2 1/5] clk: sunxi: Add support for PLL6 on the A31 Date: Wed, 29 Jan 2014 12:10:46 +0100 Message-Id: <1390993850-9054-2-git-send-email-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 1.8.4.2 In-Reply-To: <1390993850-9054-1-git-send-email-maxime.ripard@free-electrons.com> References: <1390993850-9054-1-git-send-email-maxime.ripard@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The A31 has a slightly different PLL6 clock. Add support for this new clock in our driver. Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + drivers/clk/sunxi/clk-sunxi.c | 45 +++++++++++++++++++++++ 2 files changed, 46 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index c2cb762..954845c 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -11,6 +11,7 @@ Required properties: "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 "allwinner,sun4i-pll5-clk" - for the PLL5 clock "allwinner,sun4i-pll6-clk" - for the PLL6 clock + "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31 "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock "allwinner,sun4i-axi-clk" - for the AXI clock "allwinner,sun4i-axi-gates-clk" - for the AXI gates diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 659e4ea..990ad5d 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -249,7 +249,38 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, *n = DIV_ROUND_UP(div, (*k+1)); } +/** + * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6 + * PLL6 rate is calculated as follows + * rate = parent_rate * n * (k + 1) / 2 + * parent_rate is always 24Mhz + */ + +static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* + * We always have 24MHz / 2, so we can just say that our + * parent clock is 12MHz. + */ + parent_rate = parent_rate / 2; + + /* Normalize value to a parent_rate multiple (24M / 2) */ + div = *freq / parent_rate; + *freq = parent_rate * div; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *k = div / 32; + if (*k > 3) + *k = 3; + *n = DIV_ROUND_UP(div, (*k+1)); +} /** * sun4i_get_apb1_factors() - calculates m, p factors for APB1 @@ -416,6 +447,13 @@ static struct clk_factors_config sun4i_pll5_config = { .kwidth = 2, }; +static struct clk_factors_config sun6i_a31_pll6_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, +}; + static struct clk_factors_config sun4i_apb1_config = { .mshift = 0, .mwidth = 5, @@ -457,6 +495,12 @@ static const struct factors_data sun4i_pll5_data __initconst = { .getter = sun4i_get_pll5_factors, }; +static const struct factors_data sun6i_a31_pll6_data __initconst = { + .enable = 31, + .table = &sun6i_a31_pll6_config, + .getter = sun6i_a31_get_pll6_factors, +}; + static const struct factors_data sun4i_apb1_data __initconst = { .table = &sun4i_apb1_config, .getter = sun4i_get_apb1_factors, @@ -972,6 +1016,7 @@ free_clkdata: static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, + {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, -- 1.8.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/