Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752681AbaBCOfy (ORCPT ); Mon, 3 Feb 2014 09:35:54 -0500 Received: from eu1sys200aog119.obsmtp.com ([207.126.144.147]:58445 "EHLO eu1sys200aog119.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752333AbaBCOft (ORCPT ); Mon, 3 Feb 2014 09:35:49 -0500 From: To: Cc: Philipp Zabel , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Rob Landley , Russell King , Srinivas Kandagatla , Stuart Menefy , Grant Likely , , , , , Arnd Bergmann , , Olof Johansson Subject: [PATCH v2 2/6] drivers: reset: Reset controller driver for STiH415 Date: Mon, 3 Feb 2014 14:28:33 +0000 Message-ID: <1391437713-12013-1-git-send-email-srinivas.kandagatla@st.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1391437665-11913-1-git-send-email-srinivas.kandagatla@st.com> References: <1391437665-11913-1-git-send-email-srinivas.kandagatla@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.65.51.147] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Stephen Gallimore This patch adds a reset controller platform driver for the STiH415 SoC. This initial version provides a compatible driver for the "st,stih415-powerdown" device, which registers a system configuration register based reset controller that controls the powerdown state of hardware such as the on-chip USB host controllers. Signed-off-by: Stephen Gallimore --- .../devicetree/bindings/reset/st,sti-powerdown.txt | 47 ++++++++++++ arch/arm/boot/dts/stih415.dtsi | 6 ++ drivers/reset/sti/Kconfig | 4 + drivers/reset/sti/Makefile | 3 + drivers/reset/sti/reset-stih415.c | 77 ++++++++++++++++++++ .../dt-bindings/reset-controller/stih415-resets.h | 19 +++++ 6 files changed, 156 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/st,sti-powerdown.txt create mode 100644 drivers/reset/sti/reset-stih415.c create mode 100644 include/dt-bindings/reset-controller/stih415-resets.h diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt new file mode 100644 index 0000000..5ab26b7 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt @@ -0,0 +1,47 @@ +STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller +============================================================================= + +This binding describes a reset controller device that is used to enable and +disable on-chip peripheral controllers such as USB and SATA, using +"powerdown" control bits found in the STi family SoC system configuration +registers. These have been grouped together into a single reset controller +device for convenience. + +The actual action taken when powerdown is asserted is hardware dependent. +However, when asserted it may not be possible to access the hardware's +registers and after an assert/deassert sequence the hardware's previous state +may no longer be valid. + +Please refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "st,-powerdown" + ex: "st,stih415-powerdown", "st,stih416-powerdown" +- #reset-cells: 1, see below + +example: + + powerdown: powerdown-controller { + #reset-cells = <1>; + compatible = "st,stih415-powerdown"; + }; + + +Specifying powerdown control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the powerdown device node and an +index specifying which channel to use, as described in reset.txt + +example: + + usb1: usb@fe200000 { + resets = <&powerdown STIH41X_USB1_POWERDOWN>; + }; + +Macro definitions for the supported reset channels can be found in: + +include/dt-bindings/reset-controller/stih415-resets.h +include/dt-bindings/reset-controller/stih416-resets.h diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d9c7dd1..19e29f4 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -10,6 +10,7 @@ #include "stih415-clock.dtsi" #include "stih415-pinctrl.dtsi" #include +#include / { L2: cache-controller { @@ -28,6 +29,11 @@ ranges; compatible = "simple-bus"; + powerdown: powerdown-controller { + #reset-cells = <1>; + compatible = "st,stih415-powerdown"; + }; + syscfg_sbc: sbc-syscfg@fe600000{ compatible = "st,stih415-sbc-syscfg", "syscon"; reg = <0xfe600000 0xb4>; diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig index ba13796..ef6654a 100644 --- a/drivers/reset/sti/Kconfig +++ b/drivers/reset/sti/Kconfig @@ -4,4 +4,8 @@ config STI_RESET_SYSCFG bool select RESET_CONTROLLER +config STIH415_RESET + bool + select STI_RESET_SYSCFG + endif diff --git a/drivers/reset/sti/Makefile b/drivers/reset/sti/Makefile index c4a51d9..fce4433 100644 --- a/drivers/reset/sti/Makefile +++ b/drivers/reset/sti/Makefile @@ -1 +1,4 @@ obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o + +# SoC specific reset devices +obj-$(CONFIG_STIH415_RESET) += reset-stih415.o diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c new file mode 100644 index 0000000..56c2146 --- /dev/null +++ b/drivers/reset/sti/reset-stih415.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited + * Author: Stephen Gallimore + * Author: Srinivas Kandagatla + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include + +#include + +#include "reset-syscfg.h" + +/* + * STiH415 Peripheral powerdown definitions. + */ +static const char stih415_front[] = "st,stih415-front-syscfg"; +static const char stih415_rear[] = "st,stih415-rear-syscfg"; +static const char stih415_sbc[] = "st,stih415-sbc-syscfg"; +static const char stih415_lpm[] = "st,stih415-lpm-syscfg"; + +#define STIH415_PDN_FRONT(_bit) \ + _SYSCFG_RST_CH(stih415_front, SYSCFG_114, _bit, SYSSTAT_187, _bit) + +#define STIH415_PDN_REAR(_cntl, _stat) \ + _SYSCFG_RST_CH(stih415_rear, SYSCFG_336, _cntl, SYSSTAT_384, _stat) + +#define SYSCFG_114 0x38 /* Powerdown request EMI/NAND/Keyscan */ +#define SYSSTAT_187 0x15c /* Powerdown status EMI/NAND/Keyscan */ + +#define SYSCFG_336 0x90 /* Powerdown request USB/SATA/PCIe */ +#define SYSSTAT_384 0x150 /* Powerdown status USB/SATA/PCIe */ + +static const struct syscfg_reset_channel_data stih415_powerdowns[] = { + [STIH415_EMISS_POWERDOWN] = STIH415_PDN_FRONT(0), + [STIH415_NAND_POWERDOWN] = STIH415_PDN_FRONT(1), + [STIH415_KEYSCAN_POWERDOWN] = STIH415_PDN_FRONT(2), + [STIH415_USB0_POWERDOWN] = STIH415_PDN_REAR(0, 0), + [STIH415_USB1_POWERDOWN] = STIH415_PDN_REAR(1, 1), + [STIH415_USB2_POWERDOWN] = STIH415_PDN_REAR(2, 2), + [STIH415_SATA0_POWERDOWN] = STIH415_PDN_REAR(3, 3), + [STIH415_SATA1_POWERDOWN] = STIH415_PDN_REAR(4, 4), + [STIH415_PCIE_POWERDOWN] = STIH415_PDN_REAR(5, 8), +}; + +static struct syscfg_reset_controller_data stih415_powerdown_controller = { + .wait_for_ack = true, + .nr_channels = ARRAY_SIZE(stih415_powerdowns), + .channels = stih415_powerdowns, +}; + +static struct of_device_id stih415_reset_match[] = { + { .compatible = "st,stih415-powerdown", + .data = &stih415_powerdown_controller, }, + {}, +}; + +static struct platform_driver stih415_reset_driver = { + .probe = syscfg_reset_probe, + .driver = { + .name = "reset-stih415", + .owner = THIS_MODULE, + .of_match_table = stih415_reset_match, + }, +}; + +static int __init stih415_reset_init(void) +{ + return platform_driver_register(&stih415_reset_driver); +} +arch_initcall(stih415_reset_init); diff --git a/include/dt-bindings/reset-controller/stih415-resets.h b/include/dt-bindings/reset-controller/stih415-resets.h new file mode 100644 index 0000000..2d54e68 --- /dev/null +++ b/include/dt-bindings/reset-controller/stih415-resets.h @@ -0,0 +1,19 @@ +/* + * This header provides constants for the reset controller + * based peripheral powerdown requests on the STMicroelectronics + * STiH415 SoC. + */ +#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH415 +#define _DT_BINDINGS_RESET_CONTROLLER_STIH415 + +#define STIH415_EMISS_POWERDOWN 0 +#define STIH415_NAND_POWERDOWN 1 +#define STIH415_KEYSCAN_POWERDOWN 2 +#define STIH415_USB0_POWERDOWN 3 +#define STIH415_USB1_POWERDOWN 4 +#define STIH415_USB2_POWERDOWN 5 +#define STIH415_SATA0_POWERDOWN 6 +#define STIH415_SATA1_POWERDOWN 7 +#define STIH415_PCIE_POWERDOWN 8 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/