Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 4 Feb 2001 18:59:49 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 4 Feb 2001 18:59:39 -0500 Received: from cp38760-a.roose1.nb.nl.home.com ([212.204.135.104]:60944 "EHLO obelix.fvdpol.home.nl") by vger.kernel.org with ESMTP id ; Sun, 4 Feb 2001 18:59:25 -0500 Date: Mon, 5 Feb 2001 00:59:18 +0100 From: Frank van de Pol To: linux-kernel@vger.kernel.org Subject: IDE CD writer fails on 2.4.x Message-ID: <20010205005918.A10412@idefix.fvdpol.home.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i X-Operating-System: Linux 2.4.2-pre1 i686 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Though I was successfull using my cdwriter under the pre series and win98 it fails using 2.4.x (i tested it with 2.4.0 and 2.4.2-pre1). cd writer software in use: Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J?rg Schilling caps according to hdparm: /dev/hdd: Model=PHILIPS CDD3610 CD-R/RW, FwRev=V:003.01, SerialNo=4VO22985121772100210 Config={ Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=3900kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:208,w/IORDY:127}, tDMA={min:127,rec:127} PIO modes: pio0 pio1 pio2 pio3 DMA modes: sdma0 sdma1 sdma2 mdma0 *mdma1 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: E-IDE Model: CD-ROM 36X/AKU Rev: U21I Type: CD-ROM ANSI SCSI revision: 02 Vendor: PHILIPS Model: CDD3610 CD-R/RW Rev: 3.01 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Detected scsi CD-ROM sr1 at scsi1, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 0x/36x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray VFS: Disk change detected on device sr(11,1) attempt to access beyond end of device 0b:01: rw=0, want=34, limit=2 isofs_read_super: bread failed, dev=0b:01, iso_blknum=16, block=16 Uniform CD-ROM driver unloaded hdb: timeout waiting for DMA ide_dmaproc: chipset supported ide_dma_timeout func only: 14 hdb: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } scsi : aborting command due to timeout : pid 0, scsi1, channel 0, id 1, lun 0 Write (10) 00 00 00 04 5c 00 00 1f 00 hdd: timeout waiting for DMA ide_dmaproc: chipset supported ide_dma_timeout func only: 14 hdd: irq timeout: status=0xd0 { Busy } hdd: DMA disabled hdd: ATAPI reset complete hdd: irq timeout: status=0xd0 { Busy } hdd: ATAPI reset complete hdd: irq timeout: status=0xd0 { Busy } hdd: status timeout: status=0xd0 { Busy } hdd: drive not ready for command hdd: ATAPI reset complete scsi1 : channel 0 target 1 lun 0 request sense failed, performing reset. SCSI bus is being reset for host 1 channel 0. /proc/ide/ide1/hdd/settings: name value min max mode ---- ----- --- --- ---- bios_cyl 0 0 1023 rw bios_head 0 0 255 rw bios_sect 0 0 63 rw current_speed 33 0 69 rw ide_scsi 0 0 1 rw init_speed 33 0 69 rw io_32bit 0 0 3 rw keepsettings 0 0 1 rw log 0 0 1 rw nice1 1 0 1 rw number 3 0 3 rw pio_mode write-only 0 255 w slow 0 0 1 rw transform 1 0 3 rw unmaskirq 0 0 1 rw using_dma 0 0 1 rw -- +---- --- -- - - - - |Frank van de Pol -o) | FvdPol@home.nl /\\ | _\_v |Linux - Why use Windows, since there is a door? - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/