Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 3 Nov 2002 06:53:06 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 3 Nov 2002 06:53:06 -0500 Received: from mailout03.sul.t-online.com ([194.25.134.81]:21388 "EHLO mailout03.sul.t-online.com") by vger.kernel.org with ESMTP id ; Sun, 3 Nov 2002 06:53:04 -0500 Message-Id: <4.3.2.7.2.20021103124403.00b4c860@mail.dns-host.com> X-Mailer: QUALCOMM Windows Eudora Version 4.3.2 Date: Sun, 03 Nov 2002 12:59:44 +0100 To: linux-kernel@vger.kernel.org From: Margit Schubert-While Subject: U160 on Adaptec 39160 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3736 Lines: 88 Hi, Anybody know why I'm not getting 160MB transfers ? Kernel is Suse 2.4.19 MB is Intel D845PESVL + 2.4 P4 + 512MB DDR333 ram. Adaptec card is in 3rd PCI slot. AGP ATI 7500 vga 2 x U160 disks on channel B with special U160 cable and actively terminated. DVD + DAT on SE channel A. Nothing on U160 channel A. Snips under from log and /proc Thanks Margit Schubert-While /var/log/boot.msg --- snip --- <6>SCSI subsystem driver Revision: 1.00 <6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <4> <4> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs <4> <6>scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <4> <4> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs <4> <4> Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: HP Model: C1537A Rev: L812 <4> Type: Sequential-Access ANSI SCSI revision: 02 <4> Vendor: FUJITSU Model: MAN3184MP Rev: 0108 <4> Type: Direct-Access ANSI SCSI revision: 03 <4> Vendor: FUJITSU Model: MAN3184MP Rev: 0108 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>scsi1:A:0:0: Tagged Queuing enabled. Depth 32 <4>scsi1:A:1:0: Tagged Queuing enabled. Depth 32 <6>st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16 <4>Attached scsi tape st0 at scsi0, channel 0, id 5, lun 0 <4>sd: allocated major 8 <7>sd: find_free_slot ...<7>sd: ... found 08:00 <4>Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 <7>sd: find_free_slot ...<7>sd: ... found 08:10 <4>Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 <4>(scsi1:A:0): 80.000MB/s transfers (40.000MHz, offset 127, 16bit) <4>SCSI device sda: 35885448 512-byte hdwr sectors (18373 MB) <6>Partition check: <6> sda: sda1 sda2 <4>(scsi1:A:1): 80.000MB/s transfers (40.000MHz, offset 127, 16bit) <4>SCSI device sdb: 35885448 512-byte hdwr sectors (18373 MB) --- end snip --- /proc/scsi/aic7xxx/1 -- snip --- Adaptec AIC7xxx driver version: 6.2.8 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Serial EEPROM: 0x433a 0x433a 0x433a 0x433a 0x433a 0x433a 0x433a 0xc33a 0x433a 0x433a 0x433a 0x433a 0xc33a 0xc33a 0xc33a 0xc33a 0x0074 0x605d 0x2807 0x0010 0x0300 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0250 0x41cf Channel A Target 0 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Goal: 80.000MB/s transfers (40.000MHz, offset 127, 16bit) Curr: 80.000MB/s transfers (40.000MHz, offset 127, 16bit) Channel A Target 0 Lun 0 Settings Commands Queued 4554 Commands Active 0 Command Openings 32 Max Tagged Openings 32 Device Queue Frozen Count 0 Channel A Target 1 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Goal: 80.000MB/s transfers (40.000MHz, offset 127, 16bit) Curr: 80.000MB/s transfers (40.000MHz, offset 127, 16bit) Channel A Target 1 Lun 0 Settings Commands Queued 56 Commands Active 0 Command Openings 32 Max Tagged Openings 32 Device Queue Frozen Count 0 --- end snip --- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/