Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752976AbaBJLzs (ORCPT ); Mon, 10 Feb 2014 06:55:48 -0500 Received: from v094114.home.net.pl ([79.96.170.134]:50948 "HELO v094114.home.net.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1752672AbaBJLzn (ORCPT ); Mon, 10 Feb 2014 06:55:43 -0500 From: "Rafael J. Wysocki" To: Peter Wu Cc: Bastien Traverse , linux-kernel@vger.kernel.org, francis.moro@gmail.com, linux-pm@vger.kernel.org, Mika Westerberg Subject: Re: 3.12: ethernet controller missing after resuming from suspend to RAM Date: Mon, 10 Feb 2014 13:10:19 +0100 Message-ID: <1747020.MhBDqPO9oJ@vostro.rjw.lan> User-Agent: KMail/4.11.4 (Linux/3.13.0+; KDE/4.11.4; x86_64; ; ) In-Reply-To: <5195003.Lv4YMFRT0Y@al> References: <52F2CC7B.80406@gmail.com> <1521445.Je1ql4ndX7@vostro.rjw.lan> <5195003.Lv4YMFRT0Y@al> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="utf-8" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Monday, February 10, 2014 02:15:22 AM Peter Wu wrote: > On Monday 10 February 2014 01:52:14 Rafael J. Wysocki wrote: > > > Could the following commit have something to do with it? > > > > > > > > > > > > commit 4ebe34503baa0644c9352bcd76d4cf573bffe206 > > > Author: Rafael J. Wysocki > > > Date: Tue Jul 16 22:10:35 2013 +0200 > > > > > > > > > ACPI / hotplug / PCI: Check for new devices on enabled slots > > > > This one, or another one in that series. I rather suspect > > > > ab1225901da2 Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious > > notifies" > > > > from Mika, but it really doesn't matter. > > > > Can you please check the patch below (it is on top of 3.14-rc1, but I think > > it'll still apply to 3.13) and report back? > > I applied the following patch: > > --- drivers/pci/hotplug/acpiphp_glue.c.orig 2014-02-10 01:46:59.678124018 +0100 > +++ drivers/pci/hotplug/acpiphp_glue.c 2014-02-10 01:48:59.634124004 +0100 > @@ -552,10 +552,10 @@ > struct pci_dev *dev; > struct pci_bus *bus = slot->bus; > struct acpiphp_func *func; > - int max, pass; > + int nr_found, max, pass, bridges_scanned = 0; > LIST_HEAD(add_list); > > - acpiphp_rescan_slot(slot); > + nr_found = acpiphp_rescan_slot(slot); > max = acpiphp_max_busnr(bus); > for (pass = 0; pass < 2; pass++) { > list_for_each_entry(dev, &bus->devices, bus_list) { > @@ -571,9 +571,16 @@ > __pci_bus_size_bridges(dev->subordinate, > &add_list); > } > + bridges_scanned++; > } > } > } > + /* Nothing more to do here if there are no new devices on this bus. */ > + if (!nr_found && !bridges_scanned && (slot->flags & SLOT_ENABLED)) { > + pr_debug("No more new devices on this bus.\n"); > + return; > + } > + > __pci_bus_assign_resources(bus, &add_list, NULL); > > acpiphp_sanitize_bus(bus); > > Unfortunately, the adapter still vanishes. dmesg is below this message. > > Peter > > [ 44.558995] CPU3 is up > [ 44.561438] ACPI: Waking up from system sleep state S3 > [ 45.254084] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI > [ 45.280727] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI > [ 45.307403] xhci_hcd 0000:02:00.0: System wakeup disabled by ACPI > [ 45.361012] PM: noirq resume of devices complete after 133.354 msecs > [ 45.361292] PM: early resume of devices complete after 0.233 msecs > [ 45.361680] iwlwifi 0000:05:00.0: RF_KILL bit toggled to enable radio. > [ 45.361731] pcieport 0000:00:1c.1: System wakeup disabled by ACPI > [ 45.470912] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X > [ 45.700502] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 45.700533] ata5: SATA link down (SStatus 0 SControl 300) > [ 45.701385] ata1.00: configured for UDMA/133 > [ 45.701503] sd 0:0:0:0: [sda] Starting disk > [ 45.707139] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 45.872011] ata2.00: configured for UDMA/100 > [ 46.791141] PM: resume of devices complete after 1430.658 msecs > [ 46.791560] PM: Finishing wakeup. > [ 46.791565] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP03 > [ 46.791568] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP03 > [ 46.791642] acpiphp_glue: No more new devices on this bus. > [ 46.791571] Restarting tasks ... done. > [ 46.793204] video LNXVIDEO:00: Restoring backlight state > [ 46.793211] video LNXVIDEO:01: Restoring backlight state > [ 47.246425] ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported > [ 47.251540] jme 0000:04:00.5: irq 50 for MSI/MSI-X > [ 47.276949] jme 0000:04:00.5 eth0: Link is down I'm wondering why these two messages are printed here. > [ 47.276974] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 47.278423] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S > [ 47.285758] iwlwifi 0000:05:00.0: Radio type=0x1-0x3-0x1 > [ 47.393492] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP01 > [ 47.393495] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP01 > [ 47.393517] acpiphp_glue: No more new devices on this bus. > [ 47.393525] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP02 > [ 47.393527] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP02 Anyway, the message you've added to the patch is not printed for this bridge, so the condition is not satified for its bus. We need to find out why it isn't satisfied and what exactly happens to the devices that appear to go away. Please apply the appended patch instead of the previous one and check the output. Thanks, Rafael --- drivers/pci/hotplug/acpiphp_glue.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) Index: linux-pm/drivers/pci/hotplug/acpiphp_glue.c =================================================================== --- linux-pm.orig/drivers/pci/hotplug/acpiphp_glue.c +++ linux-pm/drivers/pci/hotplug/acpiphp_glue.c @@ -555,10 +555,10 @@ static void __ref enable_slot(struct acp struct pci_dev *dev; struct pci_bus *bus = slot->bus; struct acpiphp_func *func; - int max, pass; + int nr_found, max, pass, bridges_scanned = 0; LIST_HEAD(add_list); - acpiphp_rescan_slot(slot); + nr_found = acpiphp_rescan_slot(slot); max = acpiphp_max_busnr(bus); for (pass = 0; pass < 2; pass++) { list_for_each_entry(dev, &bus->devices, bus_list) { @@ -574,19 +574,29 @@ static void __ref enable_slot(struct acp __pci_bus_size_bridges(dev->subordinate, &add_list); } + bridges_scanned++; } } } - __pci_bus_assign_resources(bus, &add_list, NULL); + /* Nothing more to do here if there are no new devices on this bus. */ + if (!nr_found && !bridges_scanned && (slot->flags & SLOT_ENABLED)) { + dev_info(&bus->dev, "No more new devices\n"); + return; + } + if (bridges_scanned) { + dev_info(&bus->dev, "Assigning resources\n"); + __pci_bus_assign_resources(bus, &add_list, NULL); + } + if (nr_found) { + acpiphp_sanitize_bus(bus); + acpiphp_set_hpp_values(bus); + acpiphp_set_acpi_region(slot); - acpiphp_sanitize_bus(bus); - acpiphp_set_hpp_values(bus); - acpiphp_set_acpi_region(slot); - - list_for_each_entry(dev, &bus->devices, bus_list) { - /* Assume that newly added devices are powered on already. */ - if (!dev->is_added) - dev->current_state = PCI_D0; + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Assume that newly added devices are powered on already. */ + if (!dev->is_added) + dev->current_state = PCI_D0; + } } pci_bus_add_devices(bus); @@ -734,6 +744,8 @@ static void trim_stale_devices(struct pc alive = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &v, 0); } if (!alive) { + dev_info(&dev->dev, "Removing in %s\n", __func__); + pci_stop_and_remove_bus_device(dev); if (handle) acpiphp_bus_trim(handle); @@ -812,6 +824,9 @@ static void acpiphp_sanitize_bus(struct res->end) { /* Could not assign a required resources * for this device, remove it */ + + dev_info(&dev->dev, "Removing in %s\n", __func__); + pci_stop_and_remove_bus_device(dev); break; } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/