Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1754650AbaBMMna (ORCPT <rfc822;w@1wt.eu>);
	Thu, 13 Feb 2014 07:43:30 -0500
Received: from mail-wi0-f174.google.com ([209.85.212.174]:37352 "EHLO
	mail-wi0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1753910AbaBMMn3 (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Thu, 13 Feb 2014 07:43:29 -0500
Date: Thu, 13 Feb 2014 12:43:20 +0000
From: Lee Jones <lee.jones@linaro.org>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Sangbeom Kim <sbkim73@samsung.com>, Samuel Ortiz <sameo@linux.intel.com>,
        linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
        Kyungmin Park <kyungmin.park@samsung.com>,
        Marek Szyprowski <m.szyprowski@samsung.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>, Mark Brown <broonie@kernel.org>,
        Liam Girdwood <lgirdwood@gmail.com>
Subject: Re: [PATCH v2 11/14] regulator: s2mps11: Add opmode for S2MPS14
 regulators
Message-ID: <20140213124320.GB3403@lee--X1>
References: <1392282847-25444-1-git-send-email-k.kozlowski@samsung.com>
 <1392282847-25444-12-git-send-email-k.kozlowski@samsung.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <1392282847-25444-12-git-send-email-k.kozlowski@samsung.com>
User-Agent: Mutt/1.5.21 (2010-09-15)
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

> S2MPS11/S2MPS14 regulators support different modes of operation:
>  - Always off;
>  - On/Off controlled by pin/GPIO (PWREN/LDOEN/EMMCEN);
>  - Always on;
> This is very similar to S5M8767 regulator driver which also supports
> opmodes (although S5M8767 have also low-power mode).
> 
> This patch adds parsing the operation mode from DTS by reading a
> "op_mode" property from regulator child node.
> 
> The op_mode is then used for enabling the S2MPS14 regulators.
> On S2MPS11 the DTS "op_mode" property is parsed but not used for
> enabling, as this was not tested.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> ---
>  drivers/regulator/s2mps11.c         |   97 ++++++++++++++++++++++++++++++++++-
>  include/linux/mfd/samsung/s2mps14.h |   19 +++++++
>  2 files changed, 115 insertions(+), 1 deletion(-)

<snip>

> +++ b/include/linux/mfd/samsung/s2mps14.h
> @@ -149,4 +149,23 @@ enum s2mps14_regulators {
>  #define S2MPS14_LDO_N_VOLTAGES		(S2MPS14_LDO_VSEL_MASK + 1)
>  #define S2MPS14_BUCK_N_VOLTAGES		(S2MPS14_BUCK_VSEL_MASK + 1)
>  
> +#define S2MPS14_ENCTRL_SHIFT		6
> +#define S2MPS14_ENCTRL_MASK		(0x3 << S2MPS14_ENCTRL_SHIFT)
> +
> +/*
> + * Values of regulator operation modes match device tree bindings.
> + */
> +enum s2mps14_regulator_opmode {
> +	S2MPS14_REGULATOR_OPMODE_OFF		= 0,
> +	S2MPS14_REGULATOR_OPMODE_ON		= 1,
> +	/*
> +	 * Reserved for compatibility with S5M8767 where this
> +	 * is a low power mode.
> +	 */
> +	S2MPS14_REGULATOR_OPMODE_RESERVED	= 2,
> +	S2MPS14_REGULATOR_OPMODE_SUSPEND	= 3,

You don't need to number these like this. If you want to force the
numbering to start at '0' initialise the top value, then the rest
should be sequential.

> +	S2MPS14_REGULATOR_OPMODE_MAX,
> +};
> +
>  #endif /*  __LINUX_MFD_S2MPS14_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/