Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752833AbaBPPeU (ORCPT ); Sun, 16 Feb 2014 10:34:20 -0500 Received: from mail-qc0-f182.google.com ([209.85.216.182]:59499 "EHLO mail-qc0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752508AbaBPPeR (ORCPT ); Sun, 16 Feb 2014 10:34:17 -0500 From: Srikanth Thokala To: bhelgaas@google.com, michal.simek@xilinx.com, grant.likely@linaro.org, robh+dt@kernel.org Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Srikanth Thokala Subject: [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver Date: Sun, 16 Feb 2014 21:03:49 +0530 Message-Id: <1392564830-5868-1-git-send-email-sthokal@xilinx.com> X-Mailer: git-send-email 1.7.9.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This is the driver for Xilinx AXI PCIe Host Bridge Soft IP Signed-off-by: Srikanth Thokala --- - Rebased on v3.14.0-rc2 --- .../devicetree/bindings/pci/xilinx-pcie.txt | 43 + drivers/pci/host/Kconfig | 7 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-xilinx.c | 985 ++++++++++++++++++++ 4 files changed, 1036 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt create mode 100644 drivers/pci/host/pci-xilinx.c diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt new file mode 100644 index 0000000..66a2487 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt @@ -0,0 +1,43 @@ +* Xilinx AXI PCIe Root Port Bridge DT description + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- compatible: Should contain "xlnx,axi-pcie-1.00.a" +- reg: Should contain AXI PCIe registers location and length +- interrupts: Should contain AXI PCIe interrupt +- ranges: ranges for the PCI memory regions + Please refer to the standard PCI bus binding document for a more + detailed explanation +- xlnx,axibar-num: Number of memory regions configured in the hardware, + maximum being three which is configurable in the hardware. +- xlnx,include-rc: Root Port (=1) or End Point (=0) +- xlnx,pciebar2axibar-0: Translation address from PCIe to AXI + Only one PCIe BAR is applicable in Root port mode, it can be + either 32/64-bit. If it is 64-bit BAR, lower 32 bits are present + in 'xlnx,pciebar2axibar-0' and Upper 32 bits in 'xlnx,pciebar2 + axibar-1'. And if it is 32-bit BAR, only 'xlnx,pciebar2axibar-0' + is valid + +Optional properties +- xlnx,pciebar-as: PCIe BAR aperture size is 32 (=0) or 64-bit (=1). +- xlnx,pciebar2axibar-1: Translation address from PCIe to AXI, contains + upper 32 bits if PCIe BAR size is 64-bit. When xlnx,pciebar-as + is set, this is a required property and should contain a valid + value (other than FF's) + +Example: +++++++++ + + pci_express: axi-pcie@50000000 { + #address-cells = <3>; + #size-cells = <2>; + compatible = "xlnx,axi-pcie-1.00.a"; + reg = < 0x50000000 0x10000000 >; + interrupts = < 0 52 4 >; + ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; + xlnx,axibar-num = <0x1>; + xlnx,include-rc; + xlnx,pciebar2axibar-0 = <0x0>; + xlnx,pciebar2axibar-1 = <0xffffffff>; + }; diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 47d46c6..8771824 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -33,4 +33,11 @@ config PCI_RCAR_GEN2 There are 3 internal PCI controllers available with a single built-in EHCI/OHCI host controller present on each one. +config PCI_XILINX + bool "Xilinx AXI PCIe host bridge support" + depends on ARCH_ZYNQ + help + Say 'Y' here if you want kernel to support the Xilinx AXI PCIe + Host Bridge driver. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 13fb333..4e9c843 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o +obj-$(CONFIG_PCI_XILINX) += pci-xilinx.o diff --git a/drivers/pci/host/pci-xilinx.c b/drivers/pci/host/pci-xilinx.c new file mode 100644 index 0000000..3ba5f45 --- /dev/null +++ b/drivers/pci/host/pci-xilinx.c @@ -0,0 +1,985 @@ +/* + * PCIe host controller driver for Xilinx AXI PCIe Bridge + * + * Copyright (c) 2012 - 2014 Xilinx, Inc. + * + * Based on the Tegra PCIe driver + * + * Bits taken from Synopsys Designware Host controller driver + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register definitions */ +#define XILINX_PCIE_REG_VSECC 0x00000128 +#define XILINX_PCIE_REG_VSECH 0x0000012c +#define XILINX_PCIE_REG_BIR 0x00000130 +#define XILINX_PCIE_REG_BSCR 0x00000134 +#define XILINX_PCIE_REG_IDR 0x00000138 +#define XILINX_PCIE_REG_IMR 0x0000013c +#define XILINX_PCIE_REG_BLR 0x00000140 +#define XILINX_PCIE_REG_PSCR 0x00000144 +#define XILINX_PCIE_REG_RPSC 0x00000148 +#define XILINX_PCIE_REG_MSIBASE1 0x0000014c +#define XILINX_PCIE_REG_MSIBASE2 0x00000150 +#define XILINX_PCIE_REG_RPEFR 0x00000154 +#define XILINX_PCIE_REG_RPIFR1 0x00000158 +#define XILINX_PCIE_REG_RPIFR2 0x0000015c +#define XILINX_PCIE_REG_VSECC2 0x00000200 +#define XILINX_PCIE_REG_VSECH2 0x00000204 + +/* Interrupt registers definitions */ +#define XILINX_PCIE_INTR_LINK_DOWN BIT(0) +#define XILINX_PCIE_INTR_ECRC_ERR BIT(1) +#define XILINX_PCIE_INTR_STR_ERR BIT(2) +#define XILINX_PCIE_INTR_HOT_RESET BIT(3) +#define XILINX_PCIE_INTR_CFG_COMPL GENMASK(7, 5) +#define XILINX_PCIE_INTR_CFG_TIMEOUT BIT(8) +#define XILINX_PCIE_INTR_CORRECTABLE BIT(9) +#define XILINX_PCIE_INTR_NONFATAL BIT(10) +#define XILINX_PCIE_INTR_FATAL BIT(11) +#define XILINX_PCIE_INTR_INTX BIT(16) +#define XILINX_PCIE_INTR_MSI BIT(17) +#define XILINX_PCIE_INTR_SLV_UNSUPP BIT(20) +#define XILINX_PCIE_INTR_SLV_UNEXP BIT(21) +#define XILINX_PCIE_INTR_SLV_COMPL BIT(22) +#define XILINX_PCIE_INTR_SLV_ERRP BIT(23) +#define XILINX_PCIE_INTR_SLV_CMPABT BIT(24) +#define XILINX_PCIE_INTR_SLV_ILLBUR BIT(25) +#define XILINX_PCIE_INTR_MST_DECERR BIT(26) +#define XILINX_PCIE_INTR_MST_SLVERR BIT(27) +#define XILINX_PCIE_INTR_MST_ERRP BIT(28) +#define XILINX_PCIE_IMR_ALL_MASK 0x1FF30FED +#define XILINX_PCIE_IDR_ALL_MASK 0xFFFFFFFF + +/* Root Port Error FIFO Read Register definitions */ +#define XILINX_PCIE_RPEFR_ERR_VALID BIT(18) +#define XILINX_PCIE_RPEFR_REQ_ID GENMASK(15, 0) +#define XILINX_PCIE_RPEFR_ALL_MASK 0xFFFFFFFF + +/* Root Port Interrupt FIFO Read Register 1 definitions */ +#define XILINX_PCIE_RPIFR1_INTR_VALID BIT(31) +#define XILINX_PCIE_RPIFR1_MSI_INTR BIT(30) +#define XILINX_PCIE_RPIFR1_INTR_ASSRT BIT(29) +#define XILINX_PCIE_RPIFR1_MSI_ADR_MASK GENMASK(26, 16) +#define XILINX_PCIE_RPIFR1_ALL_MASK 0xFFFFFFFF +#define XILINX_PCIE_RPIFR1_MSI_ADR_SHIFT 16 + +/* Bridge Info Register definitions */ +#define XILINX_PCIE_BIR_ECAM_SZ_MASK BIT(16) +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT 16 + +/* Root Port Interrupt FIFO Read Register 2 definitions */ +#define XILINX_PCIE_RPIFR2_MSG_DATA GENMASK(15, 0) + +/* Root Port Status/control Register definitions */ +#define XILINX_PCIE_REG_RPSC_BEN BIT(0) + +/* Phy Status/Control Register definitions */ +#define XILINX_PCIE_REG_PSCR_LNKUP BIT(11) + +/* ECAM definitions */ +#define ECAM_BUS_NUM_SHIFT 20 +#define ECAM_DEV_NUM_SHIFT 12 + +/* PCI Configuration space Bus Number Register definitions */ +#define PCI_SECONDARY_BUS_NUM_SHIFT 8 +#define PCI_SUBORDINATE_BUS_NUM_SHIFT 16 +#define PCI_LATENCY_TIMER_MASK GENMASK(31, 24) + +/* Number of MSI IRQs */ +#define XILINX_NUM_MSI_IRQS 128 + +/* Number of Memory Resources */ +#define XILINX_MAX_NUM_RESOURCES 3 + +/** + * struct xilinx_pcie_port - PCIe port information + * @reg_base: IO Mapped Register Base + * @phys_reg_base: Physical Register Base + * @reg_size: Register space + * @irq: Interrupt number + * @transn_addr_0: Translation address 0 + * @transn_addr_1: Translation address 1 + * @msg_addr: MSI message address + * @root_busno: Root Bus number + * @mem_resno: Number of memory resources + * @link_up: Link status flag + * @aperture_width: Aperture width + * @node: Device tree node + * @dev: Device pointer + * @irq_domain: IRQ domain pointer + * @mem: Memory Resources + */ +struct xilinx_pcie_port { + void __iomem *reg_base; + u32 phys_reg_base; + u32 reg_size; + u32 irq; + u32 transn_addr_0; + u32 transn_addr_1; + unsigned long msg_addr; + u8 root_busno; + u8 mem_resno; + bool link_up; + bool aperture_width; + struct device_node *node; + struct device *dev; + struct irq_domain *irq_domain; + struct resource mem[XILINX_MAX_NUM_RESOURCES]; +}; + +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS); + +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg) +{ + return readl(port->reg_base + reg); +} + +static inline void pcie_write(struct xilinx_pcie_port *port, + u32 val, u32 reg) +{ + writel(val, port->reg_base + reg); +} + +static inline bool xilinx_pcie_is_link_up(struct xilinx_pcie_port *port) +{ + return (pcie_read(port, XILINX_PCIE_REG_PSCR) & + XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0; +} + +/** + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts + * @port: PCIe port information + */ +static inline void +xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port) +{ + u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR); + + if (val & XILINX_PCIE_RPEFR_ERR_VALID) { + dev_dbg(port->dev, "Requester ID %d\n", + val & XILINX_PCIE_RPEFR_REQ_ID); + pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK, + XILINX_PCIE_REG_RPEFR); + } +} + +/** + * xilinx_pcie_verify_config - Verify configuration + * @port: PCIe port information + * @bus: Bus structure of current bus + * @devfn: device/function + * + * Return: 0 on success and PCIBIOS_DEVICE_NOT_FOUND on error + */ +static int xilinx_pcie_verify_config(struct xilinx_pcie_port *port, + struct pci_bus *bus, + unsigned int devfn) +{ + /* Check if link is up when trying to access downstream ports */ + if (bus->number != port->root_busno) + if (!xilinx_pcie_is_link_up(port)) + return 0; + + /* Only one device down on each root port */ + if (bus->number == port->root_busno && devfn > 0) + return 0; + + /* + * Do not read more than one device on the bus directly attached + * to RC. + */ + if (bus->primary == port->root_busno && devfn > 0) + return 0; + + return 1; +} + +/** + * xilinx_pcie_get_config_base - Get configuration base + * @port: PCIe port information + * @bus: Bus structure of current bus + * @devfn: Device/function + * @where: Offset from base + * + * Return: Base address of the configuration space needed to be + * accessed. + */ +static void __iomem *xilinx_pcie_get_config_base(struct xilinx_pcie_port *port, + struct pci_bus *bus, + unsigned int devfn, + int where) +{ + int relbus; + + relbus = (bus->number << ECAM_BUS_NUM_SHIFT) | + (devfn << ECAM_DEV_NUM_SHIFT); + + return port->reg_base + relbus + where; +} + +/** + * xilinx_pcie_read_config - Read configuration space + * @bus: Bus structure of current bus + * @devfn: Device/function + * @where: Offset from base + * @size: Byte/word/dword + * @val: Value to be read + * + * Return: PCIBIOS_SUCCESSFUL on success + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER + * on failure. + */ +static int xilinx_pcie_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, + int size, + u32 *val) +{ + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + void __iomem *addr; + + if (!port) { + BUG(); + return -EINVAL; + } + + if (!xilinx_pcie_verify_config(port, bus, devfn)) { + *val = 0xFFFFFFFF; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + addr = xilinx_pcie_get_config_base(port, bus, devfn, where); + if (!addr) + return PCIBIOS_BAD_REGISTER_NUMBER; + + switch (size) { + case 1: + *val = readb(addr); + break; + case 2: + *val = readw(addr); + break; + default: + *val = readl(addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +/** + * xilinx_pcie_write_config - Write configuration space + * @bus: Bus structure of current bus + * @devfn: Device/function + * @where: Offset from base + * @size: Byte/word/dword + * @val: Value to be written to device + * + * Return: PCIBIOS_SUCCESSFUL on success, + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER + * on failure. + */ +static int xilinx_pcie_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, + int size, + u32 val) +{ + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + void __iomem *addr; + + if (!port) { + BUG(); + return -EINVAL; + } + + if (!xilinx_pcie_verify_config(port, bus, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = xilinx_pcie_get_config_base(port, bus, devfn, where); + if (!addr) + return PCIBIOS_BAD_REGISTER_NUMBER; + + switch (size) { + case 1: + writeb(val, addr); + break; + case 2: + writew(val, addr); + break; + default: + writel(val, addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* PCIe operations */ +static struct pci_ops xilinx_pcie_ops = { + .read = xilinx_pcie_read_config, + .write = xilinx_pcie_write_config, +}; + +/* MSI functions */ + +/** + * xilinx_pcie_destroy_msi - Free MSI number + * @irq: IRQ to be freed + */ +static void xilinx_pcie_destroy_msi(unsigned int irq) +{ + struct irq_desc *desc; + struct msi_desc *msi; + struct xilinx_pcie_port *port; + + desc = irq_to_desc(irq); + msi = irq_desc_get_msi_desc(desc); + port = sys_to_pcie(msi->dev->bus->sysdata); + if (!port) { + BUG(); + return; + } + + if (!test_bit(irq, msi_irq_in_use)) + dev_err(port->dev, "Trying to free unused MSI#%d\n", irq); + else + clear_bit(irq, msi_irq_in_use); +} + +/** + * xilinx_pcie_assign_msi - Allocate MSI number + * @port: PCIe port structure + * + * Return: A valid IRQ on success and error value on failure. + */ +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) +{ + int pos; + + pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); + if (pos < XILINX_NUM_MSI_IRQS) + set_bit(pos, msi_irq_in_use); + else + return -ENOSPC; + + return irq_find_mapping(port->irq_domain, pos); +} + +/** + * xilinx_msi_teardown_irq - Destroy the MSI + * @chip: MSI Chip descriptor + * @irq: MSI IRQ to destroy + */ +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq) +{ + xilinx_pcie_destroy_msi(irq); +} + +/** + * xilinx_pcie_msi_setup_irq - Setup MSI request + * @chip: MSI chip pointer + * @pdev: PCIe device pointer + * @desc: MSI descriptor pointer + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip, + struct pci_dev *pdev, + struct msi_desc *desc) +{ + struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata); + int irq; + struct msi_msg msg; + + if (!port) { + BUG(); + return -EINVAL; + } + + irq = xilinx_pcie_assign_msi(port); + if (irq < 0) + return irq; + + irq_set_msi_desc(irq, desc); + + msg.address_hi = 0; + msg.address_lo = virt_to_phys((void *)port->msg_addr); + msg.data = irq; + + write_msi_msg(irq, &msg); + + return 0; +} + +/* MSI Chip Descriptor */ +static struct msi_chip xilinx_pcie_msi_chip = { + .setup_irq = xilinx_pcie_msi_setup_irq, + .teardown_irq = xilinx_msi_teardown_irq, +}; + +/* HW Interrupt Chip Descriptor */ +static struct irq_chip xilinx_msi_irq_chip = { + .name = "Xilinx PCIe MSI", + .irq_enable = unmask_msi_irq, + .irq_disable = mask_msi_irq, + .irq_mask = mask_msi_irq, + .irq_unmask = unmask_msi_irq, +}; + +/** + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid + * @domain: IRQ domain + * @irq: Virtual IRQ number + * @hwirq: HW interrupt number + * + * Return: Always returns 0. + */ +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + set_irq_flags(irq, IRQF_VALID); + + return 0; +} + +/* IRQ Domain operations */ +static const struct irq_domain_ops msi_domain_ops = { + .map = xilinx_pcie_msi_map, +}; + +/** + * xilinx_pcie_enable_msi - Enable MSI support + * @port: PCIe port information + */ +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port) +{ + port->msg_addr = __get_free_pages(GFP_KERNEL, 0); + + pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1); + pcie_write(port, virt_to_phys((void *)port->msg_addr), + XILINX_PCIE_REG_MSIBASE2); +} + +/* PCIe HW Functions */ + +/** + * xilinx_pcie_setup - Setup memory resources + * @nr: Bus number + * @sys: Per controller structure + * + * Return: '1' on success and '0' on failure + */ +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct xilinx_pcie_port *port = sys_to_pcie(sys); + int i; + + if (!port) + return 0; + + for (i = 0; i < port->mem_resno; i++) + pci_add_resource_offset(&sys->resources, &port->mem[i], + sys->mem_offset); + + return 1; +} + +/** + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus + * @bus: PCIe bus + */ +static void xilinx_pcie_add_bus(struct pci_bus *bus) +{ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + + if (!port) + return; + + xilinx_pcie_msi_chip.dev = port->dev; + bus->msi = &xilinx_pcie_msi_chip; + } +} + +/** + * xilinx_pcie_scan_bus - Scan PCIe bus for devices + * @nr: Bus number + * @sys: Per controller structure + * + * Return: Valid Bus pointer on success and NULL on failure + */ +static struct pci_bus __init *xilinx_pcie_scan_bus(int nr, + struct pci_sys_data *sys) +{ + struct xilinx_pcie_port *port = sys_to_pcie(sys); + struct pci_bus *bus; + + if (port) { + port->root_busno = sys->busnr; + bus = pci_scan_root_bus(NULL, sys->busnr, &xilinx_pcie_ops, + sys, &sys->resources); + } else { + bus = NULL; + BUG(); + } + + return bus; +} + +/** + * xilinx_pcie_map_irq - Get the interrupt of this port + * @dev: PCIe device + * @slot: Bridge slot + * @pin: Interrupt pin + * + * Return: Interrupt number on success and error value on failure + */ +static int xilinx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct xilinx_pcie_port *port = sys_to_pcie(dev->bus->sysdata); + + if (!port) + return -EINVAL; + + return port->irq; +} + +/** + * xilinx_pcie_intr_handler - Interrupt Service Handler + * @irq: IRQ number + * @data: PCIe port information + * + * Return: IRQ_HANDLED on success and IRQ_NONE on failure + */ +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) +{ + struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data; + u32 val, mask, status, msi_data; + + /* Read interrupt decode and mask registers */ + val = pcie_read(port, XILINX_PCIE_REG_IDR); + mask = pcie_read(port, XILINX_PCIE_REG_IMR); + + status = val & mask; + if (!status) + return IRQ_NONE; + + if (status & XILINX_PCIE_INTR_LINK_DOWN) + dev_warn(port->dev, "Link Down\n"); + + if (status & XILINX_PCIE_INTR_ECRC_ERR) + dev_warn(port->dev, "ECRC failed\n"); + + if (status & XILINX_PCIE_INTR_STR_ERR) + dev_warn(port->dev, "Streaming error\n"); + + if (status & XILINX_PCIE_INTR_HOT_RESET) + dev_info(port->dev, "Hot reset\n"); + + if (status & XILINX_PCIE_INTR_CFG_TIMEOUT) + dev_warn(port->dev, "ECAM access timeout\n"); + + if (status & XILINX_PCIE_INTR_CORRECTABLE) { + dev_warn(port->dev, "Correctable error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_NONFATAL) { + dev_warn(port->dev, "Non fatal error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_FATAL) { + dev_warn(port->dev, "Fatal error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_INTX) { + /* INTx interrupt received */ + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); + + /* Check whether interrupt valid */ + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); + return IRQ_HANDLED; + } + + /* Check MSI or INTX */ + if (!(val & XILINX_PCIE_RPIFR1_MSI_INTR)) { + if (val & XILINX_PCIE_RPIFR1_INTR_ASSRT) + dev_dbg(port->dev, "INTx assert\n"); + else + dev_dbg(port->dev, "INTx deassert\n"); + } + + /* Clear interrupt FIFO register 1 */ + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, + XILINX_PCIE_REG_RPIFR1); + } + + if (status & XILINX_PCIE_INTR_MSI) { + /* MSI Interrupt */ + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); + + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); + return IRQ_HANDLED; + } + + if (val & XILINX_PCIE_RPIFR1_MSI_INTR) { + msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) & + XILINX_PCIE_RPIFR2_MSG_DATA; + + /* Clear interrupt FIFO register 1 */ + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, + XILINX_PCIE_REG_RPIFR1); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + /* Handle MSI Interrupt */ + generic_handle_irq(msi_data); + } + } + } + + if (status & XILINX_PCIE_INTR_SLV_UNSUPP) + dev_warn(port->dev, "Slave unsupported request\n"); + + if (status & XILINX_PCIE_INTR_SLV_UNEXP) + dev_warn(port->dev, "Slave unexpected completion\n"); + + if (status & XILINX_PCIE_INTR_SLV_COMPL) + dev_warn(port->dev, "Slave completion timeout\n"); + + if (status & XILINX_PCIE_INTR_SLV_ERRP) + dev_warn(port->dev, "Slave Error Poison\n"); + + if (status & XILINX_PCIE_INTR_SLV_CMPABT) + dev_warn(port->dev, "Slave Completer Abort\n"); + + if (status & XILINX_PCIE_INTR_SLV_ILLBUR) + dev_warn(port->dev, "Slave Illegal Burst\n"); + + if (status & XILINX_PCIE_INTR_MST_DECERR) + dev_warn(port->dev, "Master decode error\n"); + + if (status & XILINX_PCIE_INTR_MST_SLVERR) + dev_warn(port->dev, "Master slave error\n"); + + if (status & XILINX_PCIE_INTR_MST_ERRP) + dev_warn(port->dev, "Master error poison\n"); + + /* Clear the Interrupt Decode register */ + pcie_write(port, status, XILINX_PCIE_REG_IDR); + + return IRQ_HANDLED; +} + +/** + * xilinx_pcie_init_port - Initialize hardware + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_init_port(struct xilinx_pcie_port *port) +{ + int err; + u32 val, last, first = 0; + + port->reg_base = devm_ioremap(port->dev, port->phys_reg_base, + port->reg_size); + if (!port->reg_base) + return -ENOMEM; + + /* make sure it is root port before touching header */ + pcie_write(port, PCI_COMMAND_MASTER, PCI_COMMAND); + + /* Check if PCIe link is up? */ + port->link_up = xilinx_pcie_is_link_up(port); + if (!port->link_up) + dev_info(port->dev, "PCIe Link is DOWN\n"); + else + dev_info(port->dev, "PCIe Link is UP\n"); + + /* Disable all interrupts*/ + pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK, + XILINX_PCIE_REG_IMR); + + /* Clear pending interrupts */ + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) & + XILINX_PCIE_IMR_ALL_MASK, + XILINX_PCIE_REG_IDR); + + /* Enable all interrupts*/ + pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, + XILINX_PCIE_REG_IMR); + + /* Enable the 'Bridge enable' bit */ + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) | + XILINX_PCIE_REG_RPSC_BEN, XILINX_PCIE_REG_RPSC); + + /* Register Interrupt Handler */ + err = request_irq(port->irq, xilinx_pcie_intr_handler, + IRQF_SHARED, "xilinx-pcie", port); + if (err) { + dev_err(port->dev, + "Could not allocate interrupt %d\n", port->irq); + return err; + } + + /* Get last bus number */ + val = pcie_read(port, XILINX_PCIE_REG_BIR); + last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >> + XILINX_PCIE_BIR_ECAM_SZ_SHIFT; + + /* Write primary, secondary and subordinate bus numbers */ + val = pcie_read(port, PCI_PRIMARY_BUS) & PCI_LATENCY_TIMER_MASK; + val |= first; + val |= (first + 1) << PCI_SECONDARY_BUS_NUM_SHIFT; + val |= last << PCI_SUBORDINATE_BUS_NUM_SHIFT; + pcie_write(port, val, PCI_PRIMARY_BUS); + + /* Setup RC BARs */ + pcie_write(port, port->transn_addr_0, PCI_BASE_ADDRESS_0); + if (port->aperture_width) + pcie_write(port, port->transn_addr_1, PCI_BASE_ADDRESS_1); + + return 0; +} + +/** + * xilinx_pcie_parse_dt - Parse Device tree + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct device_node *node = port->dev->of_node; + struct resource *io, res; + struct of_pci_range_parser parser; + struct of_pci_range range; + int err, i = 0; + + /* Check if it is configured for Root Port */ + if (!of_property_read_bool(node, "xlnx,include-rc")) { + dev_err(port->dev, "Not configured for Root Port\n"); + return -EINVAL; + } + + /* Request and map I/O memory */ + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->phys_reg_base = io->start; + port->reg_size = resource_size(io); + + /* Map the IRQ */ + port->irq = irq_of_parse_and_map(node, 0); + if (!port->irq) { + dev_err(port->dev, "Unable to get IRQ\n"); + return -EINVAL; + } + + /* Is the aperture width 32/64? */ + port->aperture_width = of_property_read_bool(node, "xlnx,pciebar-as"); + + /* Get address translation parameters */ + err = of_property_read_u32(node, "xlnx,pciebar2axibar-0", + &port->transn_addr_0); + if (err) { + dev_err(port->dev, "No translation address 0 found\n"); + return err; + } + + if (port->aperture_width) { + err = of_property_read_u32(node, "xlnx,pciebar2axibar-1", + &port->transn_addr_1); + if (err) { + dev_err(port->dev, "No translation address 1 found\n"); + return err; + } + } + + /* Get memory resources */ + err = of_property_read_u8(node, "xlnx,axibar-num", &port->mem_resno); + if (err) { + dev_err(port->dev, "No Memory resources found\n"); + return err; + } + + if (of_pci_range_parser_init(&parser, node)) { + dev_err(port->dev, "missing \"ranges\" property\n"); + return -EINVAL; + } + + for_each_of_pci_range(&parser, &range) { + if (i >= port->mem_resno) { + dev_err(port->dev, "Maximum memory resources exceeded\n"); + return -EINVAL; + } + + of_pci_range_to_resource(&range, node, &res); + + switch (res.flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_MEM: + if (res.flags & IORESOURCE_PREFETCH) + port->mem[i].name = "PREFETCH"; + else + port->mem[i].name = "MEM"; + + memcpy(&port->mem[i], &res, sizeof(res)); + i++; + /* Fallthrough */ + default: + break; + } + } + + return 0; +} + +/** + * xilinx_pcie_probe - Probe function + * @pdev: Platform device pointer + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_probe(struct platform_device *pdev) +{ + struct xilinx_pcie_port *port; + struct hw_pci hw; + int err; + + port = devm_kzalloc(&pdev->dev, sizeof(struct xilinx_pcie_port *), + GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->dev = &pdev->dev; + + /* Parse the device tree */ + err = xilinx_pcie_parse_dt(port); + if (err) { + dev_err(port->dev, "Parsing DT failed\n"); + return err; + } + + /* Initialize the hardware */ + err = xilinx_pcie_init_port(port); + if (err) { + dev_err(port->dev, "HW Initalization failed\n"); + return err; + } + + /* Setup MSI */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + int i; + + port->irq_domain = irq_domain_add_linear(port->dev->of_node, + XILINX_NUM_MSI_IRQS, &msi_domain_ops, + &xilinx_pcie_msi_chip); + if (!port->irq_domain) { + dev_err(port->dev, "Failed to get an IRQ domain\n"); + return -ENXIO; + } + + for (i = 0; i < XILINX_NUM_MSI_IRQS; i++) + irq_create_mapping(port->irq_domain, i); + + xilinx_pcie_enable_msi(port); + } + + memset(&hw, 0, sizeof(hw)); + + hw.nr_controllers = 1; + hw.private_data = (void **)&port; + hw.setup = xilinx_pcie_setup; + hw.map_irq = xilinx_pcie_map_irq; + hw.add_bus = xilinx_pcie_add_bus; + hw.scan = xilinx_pcie_scan_bus; + hw.ops = &xilinx_pcie_ops; + + /* Register the device */ + pci_common_init_dev(port->dev, &hw); + + platform_set_drvdata(pdev, port); + + return 0; +} + +/** + * xilinx_pcie_remove - Remove function + * @pdev: Platform device pointer + * + * Return: '0' always + */ +static int xilinx_pcie_remove(struct platform_device *pdev) +{ + struct xilinx_pcie_port *port = platform_get_drvdata(pdev); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + int i; + u32 irq; + + free_pages(port->msg_addr, 0); + + for (i = 0; i < XILINX_NUM_MSI_IRQS; i++) { + irq = irq_find_mapping(port->irq_domain, i); + if (irq > 0) + irq_dispose_mapping(irq); + } + + irq_domain_remove(port->irq_domain); + } + + if (port->irq > 0) + free_irq(port->irq, port); + + return 0; +} + +static struct of_device_id xilinx_pcie_of_match[] = { + { .compatible = "xlnx,axi-pcie-1.00.a" ,}, + {} +}; + +static struct platform_driver xilinx_pcie_driver = { + .driver = { + .name = "xilinx-pcie", + .owner = THIS_MODULE, + .of_match_table = xilinx_pcie_of_match, + .suppress_bind_attrs = true, + }, + .probe = xilinx_pcie_probe, + .remove = xilinx_pcie_remove, +}; +module_platform_driver(xilinx_pcie_driver); + +MODULE_AUTHOR("Xilinx Inc"); +MODULE_DESCRIPTION("Xilinx AXI PCIe driver"); +MODULE_LICENSE("GPLv2"); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/