From: John W Fort <johnf@whitsunday.net.au>
To: linux-kernel@vger.kernel.org
Subject: Patch-2.5.45-ac1  inia100 compile and run problems
Date: Tue, 05 Nov 2002 15:16:20 +1000
Message-ID: <etkesucpk7plmukbdvmsa4gbs2f4rng1oa@4ax.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 8BIT
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1534
Lines: 37

Attn: Alan Cox

Thank you for your work on the inia100 SCSI card, it not so much an orphan, but a street
kid that everyone thinks they can molest.

Trivial bits from 2.5.45-ac1 compile:
drivers/scsi/inia100.h:78: warning: `inia100_detect' declared `static' but never defined
drivers/scsi/inia100.h:79: warning: `inia100_release' declared `static' but never defined
drivers/scsi/inia100.h:80: warning: `inia100_queue' declared `static' but never defined
drivers/scsi/inia100.h:81: warning: `inia100_abort' declared `static' but never defined
drivers/scsi/inia100.h:82: warning: `inia100_device_reset' declared `static' but never defined
drivers/scsi/inia100.h:83: warning: `inia100_bus_reset' declared `static' but never defined

I was working on the last three of those but the rug was pulled from under me by someone
with a grander vision.

Anyhow, I ran two parallel Bonnies on both spindles on the same host/bus and got this:

Incorrect number of segments after building list
counted 17, received 16
req nr_sec 256, cur_nr_sec 8
end request: I/O error, dev 08:10 sector 6685776

and then hangs the bus.
Would it be because there is no 'eh_host_reset_handler'?

The first run both drives reported similar I/O errors.
Works fine with 'patch-2.5.45' from Linus.
How can I help?

cu  johnf

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/