Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751699AbaB0UHp (ORCPT ); Thu, 27 Feb 2014 15:07:45 -0500 Received: from quartz.orcorp.ca ([184.70.90.242]:33882 "EHLO quartz.orcorp.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750952AbaB0UHn (ORCPT ); Thu, 27 Feb 2014 15:07:43 -0500 Date: Thu, 27 Feb 2014 13:07:29 -0700 From: Jason Gunthorpe To: Arnd Bergmann Cc: linux-arm-kernel@lists.infradead.org, Liviu Dudau , linux-pci , Bjorn Helgaas , Catalin Marinas , Will Deacon , linaro-kernel , "devicetree@vger.kernel.org" , LKML Subject: Re: [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources. Message-ID: <20140227200729.GB7773@obsidianresearch.com> References: <1393506402-11474-1-git-send-email-Liviu.Dudau@arm.com> <20140227191259.GA31753@bart.dudau.co.uk> <20140227193627.GA7773@obsidianresearch.com> <5379319.g8IPYmY2Zo@wuerfel> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5379319.g8IPYmY2Zo@wuerfel> User-Agent: Mutt/1.5.21 (2010-09-15) X-Broken-Reverse-DNS: no host name found for IP address 10.0.0.161 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Feb 27, 2014 at 08:48:08PM +0100, Arnd Bergmann wrote: > > It also looks correct for architectures that use the CPU MMIO address > > as the IO address directly (where IO_SPACE_LIMIT would be 4G) > > Are you aware of any that still do? I thought we had stopped doing > that. I thought ia64 used to, but it has been a long time since I've touched one... > > Architectures that use the virtual IO window technique will always > > require a custom pci_address_to_pio implementation. > > Hmm, at the moment we only call it from of_address_to_resource(), > which in turn does not get called on PCI devices, and does not > call pci_address_to_pio for 'simple' platform devices. The only > case I can think of where it actually matters is when we have > ISA devices in DT that use an I/O port address in the reg property, > and that case hopefully won't happen on ARM32 or ARM64. Sure, I ment, after Liviu's patch it will become required since he is cleverly using it to figure out what the io mapping the bridge driver setup before calling the helper. > > I think the legacy reasons for having all those layers of translation > > are probably not applicable to ARM64, and it is much simpler without > > the extra translation step.... > > > > Arnd, what do you think? > > Either I don't like it or I misunderstand you ;-) > > Most PCI drivers normally don't call ioport_map or pci_iomap, so > we can't just do it there. If you are thinking of calling ioport_map Okay, that was one of the 'legacy reasons'. Certainly lots of drivers do call pci_iomap, but if you think legacy drivers that don't are important to ARM64 then it makes sense to use the virtual IO window. > for every PCI device that has an I/O BAR and storing the virtual > address in the pci_dev resource, I don't see what that gains us Mainly we get to drop the fancy dynamic allocation stuff for the fixed virtual window, and it gives the option to have a 1:1 relationship between CPU addresses and PCI BARs. > in terms of complexity, and it will also break /dev/port. Yes, /dev/port needs updating, it would need to iomap (arguably it probably should be doing that already anyhow), and the hardwired limit of 65536 needs to be replaced with the arch's IO limit, but those do not seem to be fundemental problems with the UAPI?? Jason -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/