Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030502AbaDJMYA (ORCPT ); Thu, 10 Apr 2014 08:24:00 -0400 Received: from mail-yh0-f43.google.com ([209.85.213.43]:38459 "EHLO mail-yh0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030279AbaDJMX5 (ORCPT ); Thu, 10 Apr 2014 08:23:57 -0400 MIME-Version: 1.0 In-Reply-To: <20140410122146.GY6518@sirena.org.uk> References: <1397132030-2440-1-git-send-email-harinik@xilinx.com> <20140410122146.GY6518@sirena.org.uk> Date: Thu, 10 Apr 2014 17:53:56 +0530 Message-ID: Subject: Re: [PATCH v3 1/2] SPI: Add driver for Cadence SPI controller From: Harini Katakam To: Mark Brown Cc: Grant Likely , Rob Herring , Pawel Moll , Mark Rutland , "ijc+devicetree@hellion.org.uk" , Kumar Gala , linux-spi@vger.kernel.org, "linux-kernel@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-doc@vger.kernel.org" , michals@xilinx.com Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Mark, On Thu, Apr 10, 2014 at 5:51 PM, Mark Brown wrote: > On Thu, Apr 10, 2014 at 05:43:49PM +0530, Harini Katakam wrote: > >> Firstly, the timeout value obtained from this is a too low. >> This timeout is typically used for an error conditions such as >> hardware hang etc. and using a value >1*HZ would be better. >> This driver used to use similar timeout and as I understand, other >> drivers also use similar values. > > Send patches... Ok thanks, I will. Regards, Harini -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/