Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751359AbaDMFK7 (ORCPT ); Sun, 13 Apr 2014 01:10:59 -0400 Received: from mail-pb0-f44.google.com ([209.85.160.44]:40311 "EHLO mail-pb0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750792AbaDMFKy (ORCPT ); Sun, 13 Apr 2014 01:10:54 -0400 Date: Sat, 12 Apr 2014 22:10:50 -0700 From: Dmitry Torokhov To: Gabriel FERNANDEZ Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Rob Landley , Russell King , Grant Likely , devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org, kernel@stlinux.com, Lee Jones , Gabriel Fernandez , Giuseppe Condorelli Subject: Re: [PATCH v4 1/7] drivers: input: keyboard: st-keyscan: add keyscan driver Message-ID: <20140413051050.GA7267@core.coreip.homeip.net> References: <1397228856-9218-1-git-send-email-gabriel.fernandez@linaro.org> <1397228856-9218-2-git-send-email-gabriel.fernandez@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1397228856-9218-2-git-send-email-gabriel.fernandez@linaro.org> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Gabriel, On Fri, Apr 11, 2014 at 05:07:30PM +0200, Gabriel FERNANDEZ wrote: > This patch adds ST Keyscan driver to use the keypad hw a subset > of ST boards provide. Specific board setup will be put in the > given dt. > > Signed-off-by: Gabriel Fernandez > Signed-off-by: Giuseppe Condorelli > --- > .../devicetree/bindings/input/st-keyscan.txt | 60 +++++ > drivers/input/keyboard/Kconfig | 12 + > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/st-keyscan.c | 260 +++++++++++++++++++++ > 4 files changed, 333 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/st-keyscan.txt > create mode 100644 drivers/input/keyboard/st-keyscan.c > > diff --git a/Documentation/devicetree/bindings/input/st-keyscan.txt b/Documentation/devicetree/bindings/input/st-keyscan.txt > new file mode 100644 > index 0000000..51eb428 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/st-keyscan.txt > @@ -0,0 +1,60 @@ > +* ST Keyscan controller Device Tree bindings > + > +The ST keyscan controller Device Tree binding is based on the > +matrix-keymap. > + > +Required properties: > +- compatible: "st,sti-keyscan" > + > +- reg: Register base address and size of st-keyscan controller. > + > +- interrupts: Interrupt number for the st-keyscan controller. > + > +- clocks: Must contain one entry, for the module clock. > + See ../clocks/clock-bindings.txt for details. > + > +- pinctrl: Should specify pin control groups used for this controller. > + See ../pinctrl/pinctrl-bindings.txt for details. > + > +- linux,keymap: The keymap for keys as described in the binding document > + devicetree/bindings/input/matrix-keymap.txt. > + > +- keypad,num-rows: Number of row lines connected to the keypad controller. > + > +- keypad,num-columns: Number of column lines connected to the keypad > + controller. > + > +Optional property: > +- st,debounce_us: Debouncing interval time in microseconds > + > +Example: > + > +keyscan: keyscan@fe4b0000 { > + compatible = "st,sti-keyscan"; > + reg = <0xfe4b0000 0x2000>; > + interrupts = ; > + clocks = <&CLK_SYSIN>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_keyscan>; > + > + keypad,num-rows = <4>; > + keypad,num-columns = <4>; > + st,debounce_us = <5000>; > + > + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) > + MATRIX_KEY(0x00, 0x01, KEY_F9) > + MATRIX_KEY(0x00, 0x02, KEY_F5) > + MATRIX_KEY(0x00, 0x03, KEY_F1) > + MATRIX_KEY(0x01, 0x00, KEY_F14) > + MATRIX_KEY(0x01, 0x01, KEY_F10) > + MATRIX_KEY(0x01, 0x02, KEY_F6) > + MATRIX_KEY(0x01, 0x03, KEY_F2) > + MATRIX_KEY(0x02, 0x00, KEY_F15) > + MATRIX_KEY(0x02, 0x01, KEY_F11) > + MATRIX_KEY(0x02, 0x02, KEY_F7) > + MATRIX_KEY(0x02, 0x03, KEY_F3) > + MATRIX_KEY(0x03, 0x00, KEY_F16) > + MATRIX_KEY(0x03, 0x01, KEY_F12) > + MATRIX_KEY(0x03, 0x02, KEY_F8) > + MATRIX_KEY(0x03, 0x03, KEY_F4) >; > + }; > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index 76842d7..40a377c 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -524,6 +524,18 @@ config KEYBOARD_STOWAWAY > To compile this driver as a module, choose M here: the > module will be called stowaway. > > +config KEYBOARD_ST_KEYSCAN > + tristate "STMicroelectronics keyscan support" > + depends on ARCH_STI > + select INPUT_EVDEV Why are you selecting evdev? Its presence is not essential for the driver. > + select INPUT_MATRIXKMAP > + help > + Say Y here if you want to use a keypad attached to the keyscan block > + on some STMicroelectronics SoC devices. > + > + To compile this driver as a module, choose M here: the > + module will be called st-keyscan. > + > config KEYBOARD_SUNKBD > tristate "Sun Type 4 and Type 5 keyboard" > select SERIO > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index 11cff7b..7504ae1 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -51,6 +51,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o > obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o > obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o > obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o > +obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o > obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o > obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o > obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o > diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c > new file mode 100644 > index 0000000..7ed3b3e > --- /dev/null > +++ b/drivers/input/keyboard/st-keyscan.c > @@ -0,0 +1,260 @@ > +/* > + * STMicroelectronics Key Scanning driver > + * > + * Copyright (c) 2014 STMicroelectonics Ltd. > + * Author: Stuart Menefy > + * > + * Based on sh_keysc.c, copyright 2008 Magnus Damm > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define ST_KEYSCAN_MAXKEYS 16 > + > +#define KEYSCAN_CONFIG_OFF 0x0 > +#define KEYSCAN_CONFIG_ENABLE 0x1 > +#define KEYSCAN_DEBOUNCE_TIME_OFF 0x4 > +#define KEYSCAN_MATRIX_STATE_OFF 0x8 > +#define KEYSCAN_MATRIX_DIM_OFF 0xc > +#define KEYSCAN_MATRIX_DIM_X_SHIFT 0x0 > +#define KEYSCAN_MATRIX_DIM_Y_SHIFT 0x2 > + > +struct st_keyscan { > + void __iomem *base; > + int irq; > + struct clk *clk; > + struct input_dev *input_dev; > + unsigned int last_state; > + unsigned int n_rows; > + unsigned int n_cols; > + unsigned int debounce_us; > +}; > + > +static irqreturn_t keyscan_isr(int irq, void *dev_id) > +{ > + struct platform_device *pdev = dev_id; > + struct st_keyscan *keypad = platform_get_drvdata(pdev); This is not safe, you are assigning platform data at the very end of probe; input device may get opened before probe is completed and IRS may come early causing OOPS. > + unsigned short *keycode = keypad->input_dev->keycode; > + int state; > + int change; > + > + state = readl(keypad->base + KEYSCAN_MATRIX_STATE_OFF) & 0xffff; > + change = keypad->last_state ^ state; > + > + while (change) { > + int scancode = __ffs(change); > + int down = state & BIT(scancode); > + > + input_report_key(keypad->input_dev, keycode[scancode], down); > + > + change ^= BIT(scancode); > + }; > + input_sync(keypad->input_dev); > + > + keypad->last_state = state; > + > + return IRQ_HANDLED; > +} > + > +static int keyscan_start(struct st_keyscan *keypad) > +{ > + clk_enable(keypad->clk); Should handle clk_enable() failures. > + > + writel(keypad->debounce_us * (clk_get_rate(keypad->clk) / 1000000), > + keypad->base + KEYSCAN_DEBOUNCE_TIME_OFF); > + > + writel(((keypad->n_cols - 1) << KEYSCAN_MATRIX_DIM_X_SHIFT) | > + ((keypad->n_rows - 1) << KEYSCAN_MATRIX_DIM_Y_SHIFT), > + keypad->base + KEYSCAN_MATRIX_DIM_OFF); > + > + writel(KEYSCAN_CONFIG_ENABLE, keypad->base + KEYSCAN_CONFIG_OFF); > + > + return 0; > +} > + > +static void keyscan_stop(struct st_keyscan *keypad) > +{ > + writel(0, keypad->base + KEYSCAN_CONFIG_OFF); > + > + clk_disable(keypad->clk); > +} > + > +static int keyscan_open(struct input_dev *dev) > +{ > + struct st_keyscan *keypad = input_get_drvdata(dev); > + > + return keyscan_start(keypad); > +} > + > +static void keyscan_close(struct input_dev *dev) > +{ > + struct st_keyscan *keypad = input_get_drvdata(dev); > + > + keyscan_stop(keypad); > +} > + > +static int keypad_matrix_key_parse_dt(struct st_keyscan *keypad_data) > +{ > + struct device *dev = keypad_data->input_dev->dev.parent; > + struct device_node *np = dev->of_node; > + int error; > + > + error = matrix_keypad_parse_of_params(dev, &keypad_data->n_rows, > + &keypad_data->n_cols); > + if (error) { > + dev_err(dev, "failed to parse keypad params\n"); > + return error; > + } > + > + of_property_read_u32(np, "st,debounce-us", &keypad_data->debounce_us); > + > + dev_info(dev, "n_rows=%d n_col=%d debounce=%d\n", > + keypad_data->n_rows, > + keypad_data->n_cols, > + keypad_data->debounce_us); > + > + return 0; > +} > + > +static int __init keyscan_probe(struct platform_device *pdev) keyscan_probe() should not be marked __init as it may be needed again if one were to unbind and rebind the driver to the device through sysfs. > +{ > + struct st_keyscan *keypad_data; > + struct input_dev *input_dev; > + struct resource *res; > + int error; > + > + if (!pdev->dev.of_node) { > + dev_err(&pdev->dev, "no keymap defined\n"); > + return -EINVAL; > + } > + > + keypad_data = devm_kzalloc(&pdev->dev, > + sizeof(*keypad_data), GFP_KERNEL); > + if (!keypad_data) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + keypad_data->base = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(keypad_data->base)) > + return PTR_ERR(keypad_data->base); > + > + keypad_data->irq = platform_get_irq(pdev, 0); > + if (keypad_data->irq < 0) { > + dev_err(&pdev->dev, "no IRQ specified\n"); > + return -EINVAL; > + } > + > + error = devm_request_irq(&pdev->dev, keypad_data->irq, keyscan_isr, 0, > + pdev->name, pdev); > + if (error) { > + dev_err(&pdev->dev, "failed to request IRQ\n"); > + return error; > + } > + > + input_dev = devm_input_allocate_device(&pdev->dev); > + > + if (!input_dev) { > + dev_err(&pdev->dev, "failed to allocate the input device\n"); > + return -ENOMEM; > + } > + > + keypad_data->clk = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(keypad_data->clk)) { > + dev_err(&pdev->dev, "cannot get clock"); > + return PTR_ERR(keypad_data->clk); > + } > + > + keypad_data->input_dev = input_dev; > + > + input_dev->name = pdev->name; > + input_dev->phys = "keyscan-keys/input0"; > + input_dev->dev.parent = &pdev->dev; > + input_dev->open = keyscan_open; > + input_dev->close = keyscan_close; > + > + input_dev->id.bustype = BUS_HOST; > + > + error = keypad_matrix_key_parse_dt(keypad_data); > + if (error) > + return error; > + > + error = matrix_keypad_build_keymap(NULL, NULL, > + keypad_data->n_rows, keypad_data->n_cols, > + NULL, input_dev); > + if (error) { > + dev_err(&pdev->dev, "failed to build keymap\n"); > + return error; > + } > + > + input_set_drvdata(input_dev, keypad_data); > + > + error = input_register_device(input_dev); > + if (error) { > + dev_err(&pdev->dev, "failed to register input device\n"); > + return error; > + } > + > + platform_set_drvdata(pdev, keypad_data); > + > + device_set_wakeup_capable(&pdev->dev, 1); > + > + return 0; > +} > + > +static int keyscan_suspend(struct device *dev) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct st_keyscan *keypad = platform_get_drvdata(pdev); > + > + if (device_may_wakeup(dev)) > + enable_irq_wake(keypad->irq); > + else > + keyscan_stop(keypad); > + > + return 0; > +} > + > +static int keyscan_resume(struct device *dev) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct st_keyscan *keypad = platform_get_drvdata(pdev); > + > + if (device_may_wakeup(dev)) > + disable_irq_wake(keypad->irq); > + else > + keyscan_start(keypad); If devoice has not been opened you should not try to stop it otherwise clk counter will be imbalanced. > + > + return 0; > +} > + > +static SIMPLE_DEV_PM_OPS(keyscan_dev_pm_ops, keyscan_suspend, keyscan_resume); > + > +static const struct of_device_id keyscan_of_match[] = { > + { .compatible = "st,sti-keyscan" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, keyscan_of_match); > + > +struct platform_driver keyscan_device_driver = { > + .probe = keyscan_probe, > + .driver = { > + .name = "st-keyscan", > + .pm = &keyscan_dev_pm_ops, > + .of_match_table = of_match_ptr(keyscan_of_match), > + } > +}; > + > +module_platform_driver(keyscan_device_driver); > + > +MODULE_AUTHOR("Stuart Menefy "); > +MODULE_DESCRIPTION("STMicroelectronics keyscan device driver"); > +MODULE_LICENSE("GPL"); > -- > 1.9.1 > Does the version of the patch below still work for you? Thanks. -- Dmitry Input: add st-keyscan driver From: Gabriel FERNANDEZ This patch adds ST Keyscan driver to use the keypad hw a subset of ST boards provide. Specific board setup will be put in the given dt. Signed-off-by: Gabriel Fernandez Signed-off-by: Giuseppe Condorelli Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/st-keyscan.txt | 60 ++++ drivers/input/keyboard/Kconfig | 11 + drivers/input/keyboard/Makefile | 1 drivers/input/keyboard/st-keyscan.c | 274 ++++++++++++++++++++ 4 files changed, 346 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/st-keyscan.txt create mode 100644 drivers/input/keyboard/st-keyscan.c diff --git a/Documentation/devicetree/bindings/input/st-keyscan.txt b/Documentation/devicetree/bindings/input/st-keyscan.txt new file mode 100644 index 0000000..51eb428 --- /dev/null +++ b/Documentation/devicetree/bindings/input/st-keyscan.txt @@ -0,0 +1,60 @@ +* ST Keyscan controller Device Tree bindings + +The ST keyscan controller Device Tree binding is based on the +matrix-keymap. + +Required properties: +- compatible: "st,sti-keyscan" + +- reg: Register base address and size of st-keyscan controller. + +- interrupts: Interrupt number for the st-keyscan controller. + +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +- pinctrl: Should specify pin control groups used for this controller. + See ../pinctrl/pinctrl-bindings.txt for details. + +- linux,keymap: The keymap for keys as described in the binding document + devicetree/bindings/input/matrix-keymap.txt. + +- keypad,num-rows: Number of row lines connected to the keypad controller. + +- keypad,num-columns: Number of column lines connected to the keypad + controller. + +Optional property: +- st,debounce_us: Debouncing interval time in microseconds + +Example: + +keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + reg = <0xfe4b0000 0x2000>; + interrupts = ; + clocks = <&CLK_SYSIN>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + + keypad,num-rows = <4>; + keypad,num-columns = <4>; + st,debounce_us = <5000>; + + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) + MATRIX_KEY(0x00, 0x01, KEY_F9) + MATRIX_KEY(0x00, 0x02, KEY_F5) + MATRIX_KEY(0x00, 0x03, KEY_F1) + MATRIX_KEY(0x01, 0x00, KEY_F14) + MATRIX_KEY(0x01, 0x01, KEY_F10) + MATRIX_KEY(0x01, 0x02, KEY_F6) + MATRIX_KEY(0x01, 0x03, KEY_F2) + MATRIX_KEY(0x02, 0x00, KEY_F15) + MATRIX_KEY(0x02, 0x01, KEY_F11) + MATRIX_KEY(0x02, 0x02, KEY_F7) + MATRIX_KEY(0x02, 0x03, KEY_F3) + MATRIX_KEY(0x03, 0x00, KEY_F16) + MATRIX_KEY(0x03, 0x01, KEY_F12) + MATRIX_KEY(0x03, 0x02, KEY_F8) + MATRIX_KEY(0x03, 0x03, KEY_F4) >; + }; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 76842d7..948a303 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -524,6 +524,17 @@ config KEYBOARD_STOWAWAY To compile this driver as a module, choose M here: the module will be called stowaway. +config KEYBOARD_ST_KEYSCAN + tristate "STMicroelectronics keyscan support" + depends on ARCH_STI || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a keypad attached to the keyscan block + on some STMicroelectronics SoC devices. + + To compile this driver as a module, choose M here: the + module will be called st-keyscan. + config KEYBOARD_SUNKBD tristate "Sun Type 4 and Type 5 keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 11cff7b..7504ae1 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c new file mode 100644 index 0000000..758b487 --- /dev/null +++ b/drivers/input/keyboard/st-keyscan.c @@ -0,0 +1,274 @@ +/* + * STMicroelectronics Key Scanning driver + * + * Copyright (c) 2014 STMicroelectonics Ltd. + * Author: Stuart Menefy + * + * Based on sh_keysc.c, copyright 2008 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#define ST_KEYSCAN_MAXKEYS 16 + +#define KEYSCAN_CONFIG_OFF 0x0 +#define KEYSCAN_CONFIG_ENABLE 0x1 +#define KEYSCAN_DEBOUNCE_TIME_OFF 0x4 +#define KEYSCAN_MATRIX_STATE_OFF 0x8 +#define KEYSCAN_MATRIX_DIM_OFF 0xc +#define KEYSCAN_MATRIX_DIM_X_SHIFT 0x0 +#define KEYSCAN_MATRIX_DIM_Y_SHIFT 0x2 + +struct st_keyscan { + void __iomem *base; + int irq; + struct clk *clk; + struct input_dev *input_dev; + unsigned long last_state; + unsigned int n_rows; + unsigned int n_cols; + unsigned int debounce_us; +}; + +static irqreturn_t keyscan_isr(int irq, void *dev_id) +{ + struct st_keyscan *keypad = dev_id; + unsigned short *keycode = keypad->input_dev->keycode; + unsigned long state, change; + int bit_nr; + + state = readl(keypad->base + KEYSCAN_MATRIX_STATE_OFF) & 0xffff; + change = keypad->last_state ^ state; + keypad->last_state = state; + + for_each_set_bit(bit_nr, &change, BITS_PER_LONG) + input_report_key(keypad->input_dev, + keycode[bit_nr], state & BIT(bit_nr)); + + input_sync(keypad->input_dev); + + return IRQ_HANDLED; +} + +static int keyscan_start(struct st_keyscan *keypad) +{ + int error; + + error = clk_enable(keypad->clk); + if (error) + return error; + + writel(keypad->debounce_us * (clk_get_rate(keypad->clk) / 1000000), + keypad->base + KEYSCAN_DEBOUNCE_TIME_OFF); + + writel(((keypad->n_cols - 1) << KEYSCAN_MATRIX_DIM_X_SHIFT) | + ((keypad->n_rows - 1) << KEYSCAN_MATRIX_DIM_Y_SHIFT), + keypad->base + KEYSCAN_MATRIX_DIM_OFF); + + writel(KEYSCAN_CONFIG_ENABLE, keypad->base + KEYSCAN_CONFIG_OFF); + + return 0; +} + +static void keyscan_stop(struct st_keyscan *keypad) +{ + writel(0, keypad->base + KEYSCAN_CONFIG_OFF); + + clk_disable(keypad->clk); +} + +static int keyscan_open(struct input_dev *dev) +{ + struct st_keyscan *keypad = input_get_drvdata(dev); + + return keyscan_start(keypad); +} + +static void keyscan_close(struct input_dev *dev) +{ + struct st_keyscan *keypad = input_get_drvdata(dev); + + keyscan_stop(keypad); +} + +static int keypad_matrix_key_parse_dt(struct st_keyscan *keypad_data) +{ + struct device *dev = keypad_data->input_dev->dev.parent; + struct device_node *np = dev->of_node; + int error; + + error = matrix_keypad_parse_of_params(dev, &keypad_data->n_rows, + &keypad_data->n_cols); + if (error) { + dev_err(dev, "failed to parse keypad params\n"); + return error; + } + + of_property_read_u32(np, "st,debounce-us", &keypad_data->debounce_us); + + dev_dbg(dev, "n_rows=%d n_col=%d debounce=%d\n", + keypad_data->n_rows, keypad_data->n_cols, + keypad_data->debounce_us); + + return 0; +} + +static int keyscan_probe(struct platform_device *pdev) +{ + struct st_keyscan *keypad_data; + struct input_dev *input_dev; + struct resource *res; + int error; + + if (!pdev->dev.of_node) { + dev_err(&pdev->dev, "no DT data present\n"); + return -EINVAL; + } + + keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data), + GFP_KERNEL); + if (!keypad_data) + return -ENOMEM; + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate the input device\n"); + return -ENOMEM; + } + + input_dev->name = pdev->name; + input_dev->phys = "keyscan-keys/input0"; + input_dev->dev.parent = &pdev->dev; + input_dev->open = keyscan_open; + input_dev->close = keyscan_close; + + input_dev->id.bustype = BUS_HOST; + + error = keypad_matrix_key_parse_dt(keypad_data); + if (error) + return error; + + error = matrix_keypad_build_keymap(NULL, NULL, + keypad_data->n_rows, + keypad_data->n_cols, + NULL, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + return error; + } + + input_set_drvdata(input_dev, keypad_data); + + keypad_data->input_dev = input_dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + keypad_data->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(keypad_data->base)) + return PTR_ERR(keypad_data->base); + + keypad_data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad_data->clk)) { + dev_err(&pdev->dev, "cannot get clock\n"); + return PTR_ERR(keypad_data->clk); + } + + error = clk_enable(keypad_data->clk); + if (error) { + dev_err(&pdev->dev, "failed to enable clock\n"); + return error; + } + + keyscan_stop(keypad_data); + + keypad_data->irq = platform_get_irq(pdev, 0); + if (keypad_data->irq < 0) { + dev_err(&pdev->dev, "no IRQ specified\n"); + return -EINVAL; + } + + error = devm_request_irq(&pdev->dev, keypad_data->irq, keyscan_isr, 0, + pdev->name, keypad_data); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + platform_set_drvdata(pdev, keypad_data); + + device_set_wakeup_capable(&pdev->dev, 1); + + return 0; +} + +static int keyscan_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct st_keyscan *keypad = platform_get_drvdata(pdev); + struct input_dev *input = keypad->input_dev; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(dev)) + enable_irq_wake(keypad->irq); + else if (input->users) + keyscan_stop(keypad); + + mutex_unlock(&input->mutex); + return 0; +} + +static int keyscan_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct st_keyscan *keypad = platform_get_drvdata(pdev); + struct input_dev *input = keypad->input_dev; + int retval = 0; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(dev)) + disable_irq_wake(keypad->irq); + else if (input->users) + retval = keyscan_start(keypad); + + mutex_unlock(&input->mutex); + return retval; +} + +static SIMPLE_DEV_PM_OPS(keyscan_dev_pm_ops, keyscan_suspend, keyscan_resume); + +static const struct of_device_id keyscan_of_match[] = { + { .compatible = "st,sti-keyscan" }, + { }, +}; +MODULE_DEVICE_TABLE(of, keyscan_of_match); + +static struct platform_driver keyscan_device_driver = { + .probe = keyscan_probe, + .driver = { + .name = "st-keyscan", + .pm = &keyscan_dev_pm_ops, + .of_match_table = of_match_ptr(keyscan_of_match), + } +}; + +module_platform_driver(keyscan_device_driver); + +MODULE_AUTHOR("Stuart Menefy "); +MODULE_DESCRIPTION("STMicroelectronics keyscan device driver"); +MODULE_LICENSE("GPL"); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/