Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755697AbaDNQpU (ORCPT ); Mon, 14 Apr 2014 12:45:20 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:46070 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755489AbaDNQZz (ORCPT ); Mon, 14 Apr 2014 12:25:55 -0400 From: Nishanth Menon To: Tony Lindgren , Santosh Shilimkar , Sricharan R CC: Sekhar Nori , Rajendra Nayak , Nishanth Menon , Peter Ujfalusi , , , , Subject: [PATCH 15/15] bus: omap_l3_noc: Add AM4372 interconnect error data Date: Mon, 14 Apr 2014 11:25:26 -0500 Message-ID: <1397492726-17203-17-git-send-email-nm@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1397492726-17203-1-git-send-email-nm@ti.com> References: <1397492726-17203-1-git-send-email-nm@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Afzal Mohammed Add AM4372 information to handle L3 error. AM4372 has two clk domains 100f and 200s. Provide flagmux and data associated with it. NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware team, L3 timeout error cannot be cleared the normal way (by setting bit 31 in STDERRLOG_MAIN), instead it may be required to do system reset. L3 error handler can't help in such scenarios. Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as done for undocumented bits. Signed-off-by: Dave Gerlach Signed-off-by: Afzal Mohammed Signed-off-by: Sekhar Nori Signed-off-by: Nishanth Menon --- .../devicetree/bindings/arm/omap/l3-noc.txt | 1 + drivers/bus/omap_l3_noc.c | 1 + drivers/bus/omap_l3_noc.h | 85 ++++++++++++++++++++ 3 files changed, 87 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt index 45d0fc2..974624e 100644 --- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt @@ -7,6 +7,7 @@ Required properties: - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family Should be "ti,omap4-l3-noc" for OMAP4 family Should be "ti,dra7-l3-noc" for DRA7 family + Should be "ti,am4372-l3-noc" for AM43 family - reg: Contains L3 register address range for each noc domain. - ti,hwmods: "l3_main_1", ... One hwmod for each noc domain. diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 9b32e53..9853e1d 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -177,6 +177,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) static const struct of_device_id l3_noc_match[] = { {.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data}, {.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data}, + {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data}, {}, }; MODULE_DEVICE_TABLE(of, l3_noc_match); diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h index 365a33c..91814e0 100644 --- a/drivers/bus/omap_l3_noc.h +++ b/drivers/bus/omap_l3_noc.h @@ -339,4 +339,89 @@ static const struct omap_l3 dra_l3_data = { .num_masters = ARRAY_SIZE(dra_l3_masters), }; +/* AM4372 data */ +static struct l3_target_data am4372_l3_target_data_200f[] = { + {0xf00, "EMIF",}, + {0x1200, "DES",}, + {0x400, "OCMCRAM",}, + {0x700, "TPTC0",}, + {0x800, "TPTC1",}, + {0x900, "TPTC2"}, + {0xb00, "TPCC",}, + {0xd00, "DEBUGSS",}, + {0xdead, L3_TARGET_NOT_SUPPORTED,}, + {0x200, "SHA",}, + {0xc00, "SGX530",}, + {0x500, "AES0",}, + {0xa00, "L4_FAST",}, + {0x300, "MPUSS_L2_RAM",}, + {0x100, "ICSS",}, +}; + +static struct l3_flagmux_data am4372_l3_flagmux_200f = { + .offset = 0x1000, + .l3_targ = am4372_l3_target_data_200f, + .num_targ_data = ARRAY_SIZE(am4372_l3_target_data_200f), +}; + +static struct l3_target_data am4372_l3_target_data_100s[] = { + {0x100, "L4_PER_0",}, + {0x200, "L4_PER_1",}, + {0x300, "L4_PER_2",}, + {0x400, "L4_PER_3",}, + {0x800, "McASP0",}, + {0x900, "McASP1",}, + {0xC00, "MMCHS2",}, + {0x700, "GPMC",}, + {0xD00, "L4_FW",}, + {0xdead, L3_TARGET_NOT_SUPPORTED,}, + {0x500, "ADCTSC",}, + {0xE00, "L4_WKUP",}, + {0xA00, "MAG_CARD",}, +}; + +static struct l3_flagmux_data am4372_l3_flagmux_100s = { + .offset = 0x600, + .l3_targ = am4372_l3_target_data_100s, + .num_targ_data = ARRAY_SIZE(am4372_l3_target_data_100s), +}; + +static struct l3_masters_data am4372_l3_masters[] = { + { 0x0, "M1 (128-bit)"}, + { 0x0, "M2 (64-bit)"}, + { 0x4, "DAP"}, + { 0x5, "P1500"}, + { 0xC, "ICSS0"}, + { 0xD, "ICSS1"}, + { 0x18, "TPTC0 Read"}, + { 0x19, "TPTC0 Write"}, + { 0x1A, "TPTC1 Read"}, + { 0x1B, "TPTC1 Write"}, + { 0x1C, "TPTC2 Read"}, + { 0x1D, "TPTC2 Write"}, + { 0x20, "SGX530"}, + { 0x25, "DSS"}, + { 0x28, "Crypto DMA RD"}, + { 0x29, "Crypto DMA WR"}, + { 0x2C, "VPFE0"}, + { 0x2D, "VPFE1"}, + { 0x30, "GEMAC"}, + { 0x34, "USB0 RD"}, + { 0x35, "USB0 WR"}, + { 0x36, "USB1 RD"}, + { 0x37, "USB1 WR"}, +}; + +static struct l3_flagmux_data *am4372_l3_flagmux[] = { + &am4372_l3_flagmux_200f, + &am4372_l3_flagmux_100s, +}; + +static const struct omap_l3 am4372_l3_data = { + .l3_flagmux = am4372_l3_flagmux, + .num_modules = ARRAY_SIZE(am4372_l3_flagmux), + .l3_masters = am4372_l3_masters, + .num_masters = ARRAY_SIZE(am4372_l3_masters), +}; + #endif /* __OMAP_L3_NOC_H */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/