Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755439AbaDNRm5 (ORCPT ); Mon, 14 Apr 2014 13:42:57 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:54016 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754621AbaDNRmy (ORCPT ); Mon, 14 Apr 2014 13:42:54 -0400 From: Ivan Khoronzhuk To: , , , , , , , , CC: , , , , , , , , , , Subject: [PATCH v2 1/5] Power: reset: keystone-reset: introduce keystone reset driver Date: Mon, 14 Apr 2014 20:41:19 +0300 Message-ID: <1397497283-16391-2-git-send-email-ivan.khoronzhuk@ti.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1397497283-16391-1-git-send-email-ivan.khoronzhuk@ti.com> References: <1397497283-16391-1-git-send-email-ivan.khoronzhuk@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The keystone SoC can be rebooted in several ways. By external reset pin, by soft and by watchdogs. To allow keystone SoC reset if watchdog is triggered we have to enable it in reset mux configuration register regarding of watchdog configuration. Also we need to set soft/hard reset we are going to use. So add keystone reset driver to handle all this stuff. Signed-off-by: Ivan Khoronzhuk --- drivers/power/reset/Kconfig | 7 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/keystone-reset.c | 171 +++++++++++++++++++++++++++++++++++ 3 files changed, 179 insertions(+) create mode 100644 drivers/power/reset/keystone-reset.c diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index fa0e4e0..4d2d3d8 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -57,3 +57,10 @@ config POWER_RESET_XGENE depends on POWER_RESET help Reboot support for the APM SoC X-Gene Eval boards. + +config POWER_RESET_KEYSTONE + bool "Keystone reset driver" + depends on ARCH_KEYSTONE + help + Reboot support for the KEYSTONE SoCs. + diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index a5b4a77..802a420 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o +obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o diff --git a/drivers/power/reset/keystone-reset.c b/drivers/power/reset/keystone-reset.c new file mode 100644 index 0000000..70fee79 --- /dev/null +++ b/drivers/power/reset/keystone-reset.c @@ -0,0 +1,171 @@ +/* + * TI keystone reboot driver + * + * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/ + * + * Author: Ivan Khoronzhuk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#define RSCTRL_KEY_MASK 0xffff0000 +#define RSCTRL_KEY 0x5a69 +#define RSCTRL_RESET BIT(16) + +#define RSCFG_RSTYPE_SOFT 0x300f +#define RSCFG_RSTYPE_HARD 0x0 + +#define RSTYPE_RG 0x0 +#define RSCTRL_RG 0x4 +#define RSCFG_RG 0x8 +#define RSISO_RG 0xc + +#define RSMUX_OMODE_MASK 0xe +#define RSMUX_OMODE_RESET_SOC 0xa +#define RSMUX_OMODE_RESET_OFF 0x0 +#define RSMUX_LOCK_MASK 0x1 +#define RSMUX_LOCK_SET 0x1 + +#define WDT_MUX_NUMBER 0x4 + +static void __iomem *rspll_base; + +/** + * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG + * To be able to access to RSCTRL, RSCFG registers + * we has to write a key before + */ +static void rsctrl_enable_rspll_write(void) +{ + void __iomem *rstctrl_rg; + u32 val; + + rstctrl_rg = rspll_base + RSCTRL_RG; + val = readl(rstctrl_rg); + val &= RSCTRL_KEY_MASK; + val |= RSCTRL_KEY; + writel(val, rstctrl_rg); +} + +static void rsctrl_restart(enum reboot_mode mode, const char *cmd) +{ + u32 val; + void __iomem *rstctrl; + + /* enable write access to RSTCTRL */ + rsctrl_enable_rspll_write(); + + /* reset the SOC */ + rstctrl = rspll_base + RSCTRL_RG; + val = readl(rstctrl); + val &= ~RSCTRL_RESET; + writel(val, rstctrl); +} + +static struct of_device_id rsctrl_of_match[] = { + {.compatible = "ti,keystone-reset", }, + {}, +}; + +static int rsctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + void __iomem *rsmux_base; + void __iomem *rg; + struct resource *res; + u32 val; + int ret; + int i; + + if (!np) + return -ENODEV; + + i = of_property_match_string(np, "reg-names", "pllregs"); + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + rspll_base = devm_ioremap_resource(dev, res); + if (IS_ERR(rspll_base)) + return PTR_ERR(rspll_base); + + i = of_property_match_string(np, "reg-names", "muxregs"); + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + rsmux_base = devm_ioremap_resource(dev, res); + if (IS_ERR(rsmux_base)) + return PTR_ERR(rsmux_base); + + /* set soft/hard reset */ + val = of_property_read_bool(np, "ti,soft-reset"); + val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD; + + rsctrl_enable_rspll_write(); + writel(val, rspll_base + RSCFG_RG); + + arm_pm_restart = rsctrl_restart; + + /* disable reset isolation for all module clocks */ + writel(0, rspll_base + RSISO_RG); + + /* enable reset for watchdogs from list */ + for (i = 0; i < WDT_MUX_NUMBER; i++) { + ret = of_property_read_u32_index(np, "ti,wdt_list", i, &val); + if (ret == -EOVERFLOW && !i) { + dev_err(dev, "ti,wdt_list property has to contain at" + "least one entry\n"); + return -EINVAL; + } else if (ret) { + break; + } + + if (val >= WDT_MUX_NUMBER) { + dev_err(dev, "ti,wdt_list property can contain" + "only numbers < 4\n"); + return -EINVAL; + } + + rg = rsmux_base + val*4; + + val = readl(rg); + val &= ~RSMUX_OMODE_MASK; + val |= RSMUX_OMODE_RESET_SOC | RSMUX_LOCK_SET; + writel(val, rg); + } + + /* disable reset for watchdogs from not list */ + for (i = 0; i < WDT_MUX_NUMBER; i++) { + rg = rsmux_base + i*4; + + val = readl(rg); + if (!(val & RSMUX_LOCK_MASK)) { + val &= ~RSMUX_OMODE_MASK; + val |= RSMUX_OMODE_RESET_OFF | RSMUX_LOCK_SET; + writel(val, rg); + } + } + + devm_iounmap(dev, rsmux_base); + return 0; +} + +static struct platform_driver rsctrl_driver = { + .probe = rsctrl_probe, + .driver = { + .owner = THIS_MODULE, + .name = KBUILD_MODNAME, + .of_match_table = rsctrl_of_match, + }, +}; +module_platform_driver(rsctrl_driver); + +MODULE_AUTHOR("Ivan Khoronzhuk "); +MODULE_DESCRIPTION("Texas Instruments keystone reset driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" KBUILD_MODNAME); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/