Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751546AbaDUDKw (ORCPT ); Sun, 20 Apr 2014 23:10:52 -0400 Received: from eusmtp01.atmel.com ([212.144.249.243]:16571 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751321AbaDUDKu convert rfc822-to-8bit (ORCPT ); Sun, 20 Apr 2014 23:10:50 -0400 From: "Yang, Wenyou" To: "Ferre, Nicolas" CC: "broonie@kernel.org" , "lgirdwood@gmail.com" , "grant.likely@linaro.org" , "rob.herring@calxeda.com" , "plagnioj@jcrosoft.com" , "linux-kernel@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-doc@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" Subject: RE: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator device node Thread-Topic: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator device node Thread-Index: AQHPAFED13SJa3qoN0CmTQcMzO1p4JsYEskAgAQKFKA= Date: Mon, 21 Apr 2014 03:08:34 +0000 Message-ID: References: <1387852421-18033-1-git-send-email-wenyou.yang@atmel.com> <1387852570-18159-1-git-send-email-wenyou.yang@atmel.com> <5351985C.4090308@atmel.com> In-Reply-To: <5351985C.4090308@atmel.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.168.5.13] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Nicolas, > -----Original Message----- > From: Ferre, Nicolas > Sent: Saturday, April 19, 2014 5:26 AM > To: Yang, Wenyou > Cc: broonie@kernel.org; lgirdwood@gmail.com; grant.likely@linaro.org; > rob.herring@calxeda.com; plagnioj@jcrosoft.com; linux- > kernel@vger.kernel.org; devicetree@vger.kernel.org; linux- > doc@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator > device node > > On 24/12/2013 03:36, Wenyou Yang : > > Reviwed-by: Mark Brown > > Signed-off-by: Wenyou Yang > > Wenyou, > > While collecting patches for our next at91-3.16-dt branch I noticed > this patch that should go on top of the SAMA5D3 CMP board. > > I would prefer to create another .dtsi file for CMP board and not mix > with the current cpu module usual board that does not contain this > regulator. But well we can do something even more simpler and move this > PMIC example to the newer SAMA5D3 Xplained board. > > So, will it be possible for you to re-send a new patch targeted to > SAMA5D3 Xplained? OK, I will re-send a new patch. > > Thanks, bye. > > > > --- > > arch/arm/boot/dts/sama5d3xcm.dtsi | 46 > +++++++++++++++++++++++++++++++++++++ > > 1 file changed, 46 insertions(+) > > > > diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi > > b/arch/arm/boot/dts/sama5d3xcm.dtsi > > index 726a0f3..3d4e5c2 100644 > > --- a/arch/arm/boot/dts/sama5d3xcm.dtsi > > +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi > > @@ -38,6 +38,52 @@ > > macb0: ethernet@f0028000 { > > phy-mode = "rgmii"; > > }; > > + > > + i2c1: i2c@f0018000 { > > + pmic: act8865@5b { > > + compatible = "active-semi,act8865"; > > + reg = <0x5b>; > > + status = "disabled"; > > + > > + regulators { > > + vcc_1v8_reg: DCDC_REG1 { > > + regulator-name = "VCC_1V8"; > > + regulator-min-microvolt = > <1800000>; > > + regulator-max-microvolt = > <1800000>; > > + regulator-always-on; > > + }; > > + > > + vcc_1v2_reg: DCDC_REG2 { > > + regulator-name = "VCC_1V2"; > > + regulator-min-microvolt = > <1100000>; > > + regulator-max-microvolt = > <1300000>; > > + regulator-suspend-mem- > microvolt = <1150000>; > > + regulator-suspend-standby- > microvolt = <1150000>; > > + regulator-always-on; > > + }; > > + > > + vcc_3v3_reg: DCDC_REG3 { > > + regulator-name = "VCC_3V3"; > > + regulator-min-microvolt = > <3300000>; > > + regulator-max-microvolt = > <3300000>; > > + regulator-always-on; > > + }; > > + > > + vddana_reg: LDO_REG1 { > > + regulator-name = "VDDANA"; > > + regulator-min-microvolt = > <3300000>; > > + regulator-max-microvolt = > <3300000>; > > + regulator-always-on; > > + }; > > + > > + vddfuse_reg: LDO_REG2 { > > + regulator-name = "FUSE_2V5"; > > + regulator-min-microvolt = > <2500000>; > > + regulator-max-microvolt = > <2500000>; > > + }; > > + }; > > + }; > > + }; > > }; > > > > nand0: nand@60000000 { > > > > > -- > Nicolas Ferre Best Regards, Wenyou Yang -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/