Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757387AbaDVQXa (ORCPT ); Tue, 22 Apr 2014 12:23:30 -0400 Received: from mga02.intel.com ([134.134.136.20]:57458 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757171AbaDVQX1 (ORCPT ); Tue, 22 Apr 2014 12:23:27 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.97,904,1389772800"; d="asc'?scan'208";a="525508606" Message-ID: <1398183760.21147.85.camel@intelbox> Subject: Re: [Intel-gfx] [Bug 3.15-rc2] [bisected] intel framebuffer broken From: Imre Deak Reply-To: imre.deak@intel.com To: Jani Nikula Cc: Knut Petersen , intel-gfx , Jesse Barnes , linux-kernel , Daniel Vetter Date: Tue, 22 Apr 2014 19:22:40 +0300 In-Reply-To: <871twpbdth.fsf@intel.com> References: <53554B59.8080107@t-online.de> <87tx9lh95w.fsf@intel.com> <535675CC.1020402@t-online.de> <871twpbdth.fsf@intel.com> Organization: Intel Content-Type: multipart/signed; micalg="pgp-sha1"; protocol="application/pgp-signature"; boundary="=-yExGmFwI3mdTEDmwRk8A" X-Mailer: Evolution 3.8.4-0ubuntu1 Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org --=-yExGmFwI3mdTEDmwRk8A Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable On Tue, 2014-04-22 at 18:10 +0300, Jani Nikula wrote: > Knut, thanks for a quick bisect. >=20 > Imre, please have a look at the sdvo WARN related to sysfs links in the > dmesg. It's probably the same WARN fixed by: http://patchwork.freedesktop.org/patch/24126/ --Imre >=20 > Daniel, you have any ideas about the bios fbdev stuff while Jesse's > traveling? >=20 > BR, > Jani. >=20 >=20 >=20 > On Tue, 22 Apr 2014, Knut Petersen wrote: > > On 22.04.2014 13:54, Jani Nikula wrote: > >> On Mon, 21 Apr 2014, Knut Petersen wrote: > >>> Booting kernel 3.15-rc2 on an AOpen i915GMm-hfs, I see the framebuffe= r broken. > >>> Only about the upper left quarter of the monitor is used for displayi= ng the boot messages, > >>> these (and the cursor) are replicated at the right of that area. > >> Is this before or after i915.ko is loaded? > > No .ko, it's compiled directly into the kernel. > > > > First bad commit is d978ef14456a38034f6c0e94a794129501f89200 > > (drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS = fbcon v12) > > > > Probably there needs to be a v13 ;-) > > > > cu, > > Knut > > > > > >> > >>> Approximately the lower half of the monitor stays black. The output o= f the xserver > >>> is not affected. > >> Most likely the fastest way to root cause is to bisect, please do. To > >> keep track of all the bugs we have, please file a bug on DRM/Intel at > >> [1] and while at it attach dmesg with drm.debug=3D0xe from the boot. > >> > >> BR, > >> Jani. > >> > >> > >> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=3DDRI > >> > >> > > > > [ 0.000000] Initializing cgroup subsys cpu > > [ 0.000000] Linux version 3.13.0-main-01064-gd978ef1 (knut@golem) (g= cc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #= 131 PREEMPT Tue Apr 22 15:32:59 CEST 2014 > > [ 0.000000] Disabled fast string operations > > [ 0.000000] e820: BIOS-provided physical RAM map: > > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] u= sable > > [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] r= eserved > > [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] r= eserved > > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7effff] u= sable > > [ 0.000000] BIOS-e820: [mem 0x000000007f7f0000-0x000000007f7f2fff] A= CPI NVS > > [ 0.000000] BIOS-e820: [mem 0x000000007f7f3000-0x000000007f7fffff] A= CPI data > > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] r= eserved > > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] r= eserved > > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] r= eserved > > [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] r= eserved > > [ 0.000000] NX (Execute Disable) protection: active > > [ 0.000000] SMBIOS 2.3 present. > > [ 0.000000] DMI: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005 > > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable =3D=3D> = reserved > > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > > [ 0.000000] e820: last_pfn =3D 0x7f7f0 max_arch_pfn =3D 0x1000000 > > [ 0.000000] MTRR default type: uncachable > > [ 0.000000] MTRR fixed ranges enabled: > > [ 0.000000] 00000-9FFFF write-back > > [ 0.000000] A0000-F7FFF uncachable > > [ 0.000000] F8000-FBFFF write-through > > [ 0.000000] FC000-FFFFF uncachable > > [ 0.000000] MTRR variable ranges enabled: > > [ 0.000000] 0 base 000000000 mask F80000000 write-back > > [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable > > [ 0.000000] 2 disabled > > [ 0.000000] 3 disabled > > [ 0.000000] 4 disabled > > [ 0.000000] 5 disabled > > [ 0.000000] 6 disabled > > [ 0.000000] 7 disabled > > [ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff] > > [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 > > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > > [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff] > > [ 0.000000] [mem 0x37600000-0x377fffff] page 2M > > [ 0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff] > > [ 0.000000] [mem 0x34000000-0x375fffff] page 2M > > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] > > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k > > [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M > > [ 0.000000] init_memory_mapping: [mem 0x37800000-0x37bfdfff] > > [ 0.000000] [mem 0x37800000-0x379fffff] page 2M > > [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k > > [ 0.000000] BRK [0x00de1000, 0x00de1fff] PGTABLE > > [ 0.000000] RAMDISK: [mem 0x379fb000-0x37feffff] > > [ 0.000000] Allocated new RAMDISK: [mem 0x37406000-0x379fa331] > > [ 0.000000] Move RAMDISK from [mem 0x379fb000-0x37fef331] to [mem 0x= 37406000-0x379fa331] > > [ 0.000000] ACPI: RSDP 000f9320 000014 (v00 AOpen ) > > [ 0.000000] ACPI: RSDT 7f7f3040 000038 (v01 AOpen AWRDACPI 42302E31= AWRD 00000000) > > [ 0.000000] ACPI: FACP 7f7f30c0 000074 (v01 AOpen AWRDACPI 42302E31= AWRD 00000000) > > [ 0.000000] ACPI: DSDT 7f7f3180 0042E3 (v01 AOPEN AWRDACPI 00001000= MSFT 0100000E) > > [ 0.000000] ACPI: FACS 7f7f0000 000040 > > [ 0.000000] ACPI: MCFG 7f7f7580 00003C (v01 AOpen AWRDACPI 42302E31= AWRD 00000000) > > [ 0.000000] ACPI: APIC 7f7f74c0 00005A (v01 AOpen AWRDACPI 42302E31= AWRD 00000000) > > [ 0.000000] ACPI: SSDT 7f7f7600 000222 (v01 PmRef Cpu0Ist 00003000= INTL 20040311) > > [ 0.000000] ACPI: SSDT 7f7f7a00 0000E0 (v01 PmRef CpuPm 00003000= INTL 20040311) > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > [ 0.000000] 1147MB HIGHMEM available. > > [ 0.000000] 891MB LOWMEM available. > > [ 0.000000] mapped low ram: 0 - 37bfe000 > > [ 0.000000] low ram: 0 - 37bfe000 > > [ 0.000000] BRK [0x00de2000, 0x00de2fff] PGTABLE > > [ 0.000000] Zone ranges: > > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > > [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] > > [ 0.000000] HighMem [mem 0x37bfe000-0x7f7effff] > > [ 0.000000] Movable zone start for each node > > [ 0.000000] Early memory node ranges > > [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] > > [ 0.000000] node 0: [mem 0x00100000-0x7f7effff] > > [ 0.000000] On node 0 totalpages: 522125 > > [ 0.000000] free_area_init_node: node 0, pgdat c07ee748, node_mem_ma= p f6416020 > > [ 0.000000] DMA zone: 32 pages used for memmap > > [ 0.000000] DMA zone: 0 pages reserved > > [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 > > [ 0.000000] Normal zone: 1752 pages used for memmap > > [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 > > [ 0.000000] HighMem zone: 2296 pages used for memmap > > [ 0.000000] HighMem zone: 293874 pages, LIFO batch:31 > > [ 0.000000] Using APIC driver default > > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GS= I 0-23 > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high lev= el) > > [ 0.000000] ACPI: IRQ0 used by override. > > [ 0.000000] ACPI: IRQ2 used by override. > > [ 0.000000] ACPI: IRQ9 used by override. > > [ 0.000000] Using ACPI (MADT) for SMP configuration information > > [ 0.000000] nr_irqs_gsi: 40 > > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff= ] > > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff= ] > > [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff= ] > > [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devi= ces > > [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=3D1*32768 > > [ 0.000000] pcpu-alloc: [0] 0=20 > > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. = Total pages: 520341 > > [ 0.000000] Kernel command line: root=3D/dev/disk/by-id/ata-KINGSTON= _SKC100S3120G_50026B722C05CA1A-part1 netconsole=3D6665@192.168.22.15= /eth0,6666@192.168.22.31/00:01:80:62:cf:b1 sky2.legacy_pme=3D1 acpi_= enforce_resources=3Dlax drm.debug=3D0xe 3 resume=3D/dev/sda3 i915.fastboot= =3D1 pci=3Duse_crs > > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 52428= 8 bytes) > > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 = bytes) > > [ 0.000000] Initializing CPU#0 > > [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f7f0) > > [ 0.000000] Memory: 2051848K/2088500K available (4486K kernel code, = 392K rwdata, 2252K rodata, 500K init, 5504K bss, 36652K reserved, 1175496K = highmem) > > [ 0.000000] virtual kernel memory layout: > > fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB) > > pkmap : 0xffc00000 - 0xffe00000 (2048 kB) > > vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) > > lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) > > .init : 0xc07f9000 - 0xc0876000 ( 500 kB) > > .data : 0xc0561c7f - 0xc07f8100 (2649 kB) > > .text : 0xc0100000 - 0xc0561c7f (4487 kB) > > [ 0.000000] Checking if this processor honours the WP bit even in su= pervisor mode...Ok. > > [ 0.000000] Preemptible hierarchical RCU implementation. > > [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 > > [ 0.000000] CPU 0 irqstacks, hard=3Df6008000 soft=3Df600a000 > > [ 0.000000] Console: colour VGA+ 80x25 > > [ 0.000000] console [tty0] enabled > > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, I= nc., Ingo Molnar > > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 > > [ 0.000000] ... MAX_LOCK_DEPTH: 48 > > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 > > [ 0.000000] ... CLASSHASH_SIZE: 4096 > > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 > > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 > > [ 0.000000] ... CHAINHASH_SIZE: 16384 > > [ 0.000000] memory used by lock dependency info: 3567 kB > > [ 0.000000] per task-struct memory footprint: 1152 bytes > > [ 0.000000] tsc: Fast TSC calibration using PIT > > [ 0.000000] tsc: Detected 1862.782 MHz processor > > [ 0.008002] Calibrating delay loop (skipped), value calculated using= timer frequency.. 3725.56 BogoMIPS (lpj=3D7451128) > > [ 0.008276] pid_max: default: 32768 minimum: 301 > > [ 0.008476] Security Framework initialized > > [ 0.008623] AppArmor: AppArmor initialized > > [ 0.008774] Mount-cache hash table entries: 512 > > [ 0.010338] Disabled fast string operations > > [ 0.010480] mce: CPU supports 5 MCE banks > > [ 0.010621] CPU0: Thermal monitoring enabled (TM1) > > [ 0.010774] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 > > Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8 > > tlb_flushall_shift: 6 > > [ 0.011132] CPU: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, m= odel: 0d, stepping: 08) > > [ 0.011488] ACPI: Core revision 20131115 > > [ 0.020622] ACPI: All ACPI Tables successfully acquired > > [ 0.024017] ftrace: allocating 22743 entries in 45 pages > > [ 0.036596] Performance Events: p6 PMU driver. > > [ 0.036777] ... version: 0 > > [ 0.036909] ... bit width: 32 > > [ 0.037041] ... generic registers: 2 > > [ 0.037173] ... value mask: 00000000ffffffff > > [ 0.037310] ... max period: 000000007fffffff > > [ 0.037446] ... fixed-purpose events: 0 > > [ 0.037578] ... event mask: 0000000000000003 > > [ 0.040928] Enabling APIC mode: Flat. Using 1 I/O APICs > > [ 0.041531] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin= 2=3D-1 > > [ 0.044149] NMI watchdog: enabled on all CPUs, permanently consumes = one hw-PMU counter. > > [ 0.084000] devtmpfs: initialized > > [ 0.084000] PM: Registering ACPI NVS region [mem 0x7f7f0000-0x7f7f2f= ff] (12288 bytes) > > [ 0.084000] NET: Registered protocol family 16 > > [ 0.084000] cpuidle: using governor ladder > > [ 0.084006] cpuidle: using governor menu > > [ 0.084310] ACPI: bus type PCI registered > > [ 0.084660] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe000= 0000-0xefffffff] (base 0xe0000000) > > [ 0.084907] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in= E820 > > [ 0.085047] PCI: Using MMCONFIG for extended config space > > [ 0.085183] PCI: Using configuration type 1 for base access > > [ 0.090388] bio: create slab at 0 > > [ 0.090801] ACPI: Added _OSI(Module Device) > > [ 0.090936] ACPI: Added _OSI(Processor Device) > > [ 0.091072] ACPI: Added _OSI(3.0 _SCP Extensions) > > [ 0.091206] ACPI: Added _OSI(Processor Aggregator Device) > > [ 0.108176] ACPI: Interpreter enabled > > [ 0.108321] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep Sta= te [\_S1_] (20131115/hwxface-580) > > [ 0.108617] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep Sta= te [\_S2_] (20131115/hwxface-580) > > [ 0.108971] ACPI: (supports S0 S3 S4 S5) > > [ 0.109104] ACPI: Using IOAPIC for interrupt routing > > [ 0.109311] PCI: Using host bridge windows from ACPI; if necessary, = use "pci=3Dnocrs" and report a bug > > [ 0.129899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > > [ 0.130047] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM = ClockPM Segments MSI] > > [ 0.130402] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling A= SPM > > [ 0.131088] PCI host bridge to bus 0000:00 > > [ 0.131224] pci_bus 0000:00: root bus resource [bus 00-ff] > > [ 0.131364] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > > [ 0.131503] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > > [ 0.131644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000= bffff] > > [ 0.131786] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000= dffff] > > [ 0.131927] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfeb= fffff] > > [ 0.132104] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000 > > [ 0.132605] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000 > > [ 0.132626] pci 0000:00:02.0: reg 0x10: [mem 0xd5300000-0xd537ffff] > > [ 0.132638] pci 0000:00:02.0: reg 0x14: [io 0xe400-0xe407] > > [ 0.132652] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff p= ref] > > [ 0.132665] pci 0000:00:02.0: reg 0x1c: [mem 0xd5400000-0xd543ffff] > > [ 0.132984] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000 > > [ 0.133002] pci 0000:00:02.1: reg 0x10: [mem 0xd5380000-0xd53fffff] > > [ 0.133397] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300 > > [ 0.133424] pci 0000:00:1b.0: reg 0x10: [mem 0xd5440000-0xd5443fff 6= 4bit] > > [ 0.133538] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > > [ 0.133967] pci 0000:00:1b.0: System wakeup disabled by ACPI > > [ 0.134209] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400 > > [ 0.134318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > > [ 0.134539] pci 0000:00:1c.0: System wakeup disabled by ACPI > > [ 0.134778] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400 > > [ 0.134900] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > > [ 0.135121] pci 0000:00:1c.1: System wakeup disabled by ACPI > > [ 0.135360] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400 > > [ 0.135477] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > > [ 0.135700] pci 0000:00:1c.2: System wakeup disabled by ACPI > > [ 0.136029] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400 > > [ 0.136146] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > > [ 0.136368] pci 0000:00:1c.3: System wakeup disabled by ACPI > > [ 0.136613] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300 > > [ 0.136677] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f] > > [ 0.136916] pci 0000:00:1d.0: System wakeup disabled by ACPI > > [ 0.137154] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300 > > [ 0.137218] pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f] > > [ 0.137457] pci 0000:00:1d.1: System wakeup disabled by ACPI > > [ 0.137695] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300 > > [ 0.137759] pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f] > > [ 0.137998] pci 0000:00:1d.2: System wakeup disabled by ACPI > > [ 0.138235] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300 > > [ 0.138299] pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f] > > [ 0.138538] pci 0000:00:1d.3: System wakeup disabled by ACPI > > [ 0.138788] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320 > > [ 0.138815] pci 0000:00:1d.7: reg 0x10: [mem 0xd5444000-0xd54443ff] > > [ 0.138930] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > > [ 0.139141] pci 0000:00:1d.7: System wakeup disabled by ACPI > > [ 0.139383] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 > > [ 0.139668] pci 0000:00:1e.0: System wakeup disabled by ACPI > > [ 0.139908] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100 > > [ 0.140046] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 > > [ 0.140058] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by = ICH6 ACPI/GPIO/TCO > > [ 0.140306] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by = ICH6 GPIO > > [ 0.140452] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02= ff > > [ 0.140593] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-16= 4f > > [ 0.141015] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180 > > [ 0.141039] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] > > [ 0.141054] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] > > [ 0.141068] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] > > [ 0.141082] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] > > [ 0.141097] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f] > > [ 0.141158] pci 0000:00:1f.2: PME# supported from D3hot > > [ 0.141459] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500 > > [ 0.141533] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] > > [ 0.141952] pci 0000:00:1c.0: PCI bridge to [bus 01] > > [ 0.142095] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000f= ffff] > > [ 0.142105] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000f= ffff 64bit pref] > > [ 0.142248] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000 > > [ 0.142283] pci 0000:02:00.0: reg 0x10: [mem 0xd5220000-0xd5223fff 6= 4bit] > > [ 0.142302] pci 0000:02:00.0: reg 0x18: [io 0xa000-0xa0ff] > > [ 0.142363] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff p= ref] > > [ 0.142461] pci 0000:02:00.0: supports D1 D2 > > [ 0.142465] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3c= old > > [ 0.142583] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.= You can enable it with 'pcie_aspm=3Dforce' > > [ 0.144137] pci 0000:00:1c.1: PCI bridge to [bus 02] > > [ 0.144277] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] > > [ 0.144285] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52f= ffff] > > [ 0.144437] pci 0000:03:00.0: [11ab:4362] type 00 class 0x020000 > > [ 0.144471] pci 0000:03:00.0: reg 0x10: [mem 0xd5020000-0xd5023fff 6= 4bit] > > [ 0.144490] pci 0000:03:00.0: reg 0x18: [io 0xb000-0xb0ff] > > [ 0.144551] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff p= ref] > > [ 0.144649] pci 0000:03:00.0: supports D1 D2 > > [ 0.144653] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3c= old > > [ 0.144771] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.= You can enable it with 'pcie_aspm=3Dforce' > > [ 0.145029] pci 0000:00:1c.2: PCI bridge to [bus 03] > > [ 0.145169] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff] > > [ 0.145177] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50f= ffff] > > [ 0.145322] pci 0000:04:00.0: [1095:3132] type 00 class 0x010400 > > [ 0.145361] pci 0000:04:00.0: reg 0x10: [mem 0xd5184000-0xd518407f 6= 4bit] > > [ 0.145391] pci 0000:04:00.0: reg 0x18: [mem 0xd5180000-0xd5183fff 6= 4bit] > > [ 0.145411] pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc07f] > > [ 0.145448] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff p= ref] > > [ 0.145541] pci 0000:04:00.0: supports D1 D2 > > [ 0.145644] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.= You can enable it with 'pcie_aspm=3Dforce' > > [ 0.145908] pci 0000:00:1c.3: PCI bridge to [bus 04] > > [ 0.146048] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] > > [ 0.146055] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51f= ffff] > > [ 0.146169] pci 0000:05:04.0: [1397:2bd0] type 00 class 0x028000 > > [ 0.148008] pci 0000:05:04.0: reg 0x10: [io 0xd000-0xd007] > > [ 0.148025] pci 0000:05:04.0: reg 0x14: [mem 0xd4000000-0xd40000ff] > > [ 0.148128] pci 0000:05:04.0: supports D1 D2 > > [ 0.148132] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot > > [ 0.148262] pci 0000:05:05.0: [14f1:8800] type 00 class 0x040000 > > [ 0.148293] pci 0000:05:05.0: reg 0x10: [mem 0xd0000000-0xd0ffffff] > > [ 0.148525] pci 0000:05:05.1: [14f1:8801] type 00 class 0x048000 > > [ 0.148552] pci 0000:05:05.1: reg 0x10: [mem 0xd1000000-0xd1ffffff] > > [ 0.148767] pci 0000:05:05.2: [14f1:8802] type 00 class 0x048000 > > [ 0.148794] pci 0000:05:05.2: reg 0x10: [mem 0xd2000000-0xd2ffffff] > > [ 0.149010] pci 0000:05:05.4: [14f1:8804] type 00 class 0x048000 > > [ 0.149037] pci 0000:05:05.4: reg 0x10: [mem 0xd3000000-0xd3ffffff] > > [ 0.149294] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive de= code) > > [ 0.149435] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] > > [ 0.149443] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ff= ffff] > > [ 0.149454] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (s= ubtractive decode) > > [ 0.149459] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (s= ubtractive decode) > > [ 0.149464] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000b= ffff] (subtractive decode) > > [ 0.149469] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000d= ffff] (subtractive decode) > > [ 0.149474] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xfebf= ffff] (subtractive decode) > > [ 0.149538] pci_bus 0000:00: on NUMA node 0 > > [ 0.151829] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 1= 2 14 15) > > [ 0.152467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *1= 2 14 15) > > [ 0.153101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 1= 2 14 15) > > [ 0.153737] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 1= 2 14 15) > > [ 0.154371] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12= 14 15) *0, disabled. > > [ 0.155152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12= 14 15) *0, disabled. > > [ 0.155931] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12= 14 15) *0, disabled. > > [ 0.156704] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 1= 2 14 15) > > [ 0.157899] ACPI: \_SB_.PCI0: notify handler is installed > > [ 0.158068] Found 1 acpi root devices > > [ 0.158733] vgaarb: device added: PCI:0000:00:02.0,decodes=3Dio+mem,= owns=3Dio+mem,locks=3Dnone > > [ 0.158992] vgaarb: loaded > > [ 0.159123] vgaarb: bridge control possible 0000:00:02.0 > > [ 0.159465] SCSI subsystem initialized > > [ 0.159727] libata version 3.00 loaded. > > [ 0.159747] ACPI: bus type USB registered > > [ 0.159934] usbcore: registered new interface driver usbfs > > [ 0.160032] usbcore: registered new interface driver hub > > [ 0.160222] usbcore: registered new device driver usb > > [ 0.160430] PCI: Using ACPI for IRQ routing > > [ 0.168904] PCI: pci_cache_line_size set to 64 bytes > > [ 0.169011] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] > > [ 0.169026] e820: reserve RAM buffer [mem 0x7f7f0000-0x7fffffff] > > [ 0.170027] hpet clockevent registered > > [ 0.170034] HPET: 3 timers in total, 0 timers will be used for per-c= pu timer > > [ 0.170177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > > [ 0.170403] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > > [ 0.172268] Switched to clocksource hpet > > [ 0.192062] AppArmor: AppArmor Filesystem Enabled > > [ 0.192292] pnp: PnP ACPI init > > [ 0.192494] ACPI: bus type PNP registered > > [ 0.193133] system 00:00: [io 0x0b78-0x0b7b] has been reserved > > [ 0.193278] system 00:00: [io 0x0f78-0x0f7b] has been reserved > > [ 0.193419] system 00:00: [io 0x0a78-0x0a7b] has been reserved > > [ 0.193558] system 00:00: [io 0x0e78-0x0e7b] has been reserved > > [ 0.193700] system 00:00: [io 0x0bbc-0x0bbf] has been reserved > > [ 0.193839] system 00:00: [io 0x0fbc-0x0fbf] has been reserved > > [ 0.193980] system 00:00: [io 0x04d0-0x04d1] has been reserved > > [ 0.194119] system 00:00: [io 0x0290-0x0297] has been reserved > > [ 0.194259] system 00:00: [io 0x0880-0x088f] has been reserved > > [ 0.194541] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (ac= tive) > > [ 0.194582] pnp 00:01: [dma 4] > > [ 0.194650] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (activ= e) > > [ 0.194761] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (activ= e) > > [ 0.194847] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (activ= e) > > [ 0.194945] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (activ= e) > > [ 0.195660] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (activ= e) > > [ 0.196252] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (activ= e) > > [ 0.197211] pnp 00:07: [dma 3] > > [ 0.197323] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (activ= e) > > [ 0.197510] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030= b (active) > > [ 0.197712] system 00:09: [io 0x4000-0x40bf] could not be reserved > > [ 0.197859] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (ac= tive) > > [ 0.197981] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (activ= e) > > [ 0.198771] system 00:0b: [mem 0xe0000000-0xefffffff] has been reser= ved > > [ 0.198918] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (ac= tive) > > [ 0.199426] system 00:0c: [mem 0x000d7800-0x000d7fff] has been reser= ved > > [ 0.199571] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be r= eserved > > [ 0.199714] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be r= eserved > > [ 0.199858] system 00:0c: [mem 0x000fc000-0x000fffff] could not be r= eserved > > [ 0.200001] system 00:0c: [mem 0x7f7f0000-0x7f7fffff] could not be r= eserved > > [ 0.200155] system 00:0c: [mem 0x00000000-0x0009ffff] could not be r= eserved > > [ 0.200298] system 00:0c: [mem 0x00100000-0x7f7effff] could not be r= eserved > > [ 0.200441] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be r= eserved > > [ 0.200583] system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reser= ved > > [ 0.200727] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reser= ved > > [ 0.200868] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reser= ved > > [ 0.201012] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reser= ved > > [ 0.201153] system 00:0c: [mem 0xfff00000-0xffffffff] has been reser= ved > > [ 0.201296] system 00:0c: [mem 0x000e0000-0x000effff] has been reser= ved > > [ 0.201441] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (ac= tive) > > [ 0.201467] pnp: PnP ACPI: found 13 devices > > [ 0.201601] ACPI: bus type PNP unregistered > > [ 0.241904] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [= bus 01] add_size 1000 > > [ 0.241914] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fff= ff 64bit pref] to [bus 01] add_size 200000 > > [ 0.241920] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fff= ff] to [bus 01] add_size 200000 > > [ 0.241935] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fff= ff pref] to [bus 02] add_size 200000 > > [ 0.241950] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fff= ff pref] to [bus 03] add_size 200000 > > [ 0.241965] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x001fff= ff pref] to [bus 04] add_size 200000 > > [ 0.241988] pci 0000:00:1c.0: res[8]=3D[mem 0x00100000-0x000fffff] g= et_res_add_size add_size 200000 > > [ 0.241993] pci 0000:00:1c.0: res[9]=3D[mem 0x00100000-0x000fffff 64= bit pref] get_res_add_size add_size 200000 > > [ 0.241999] pci 0000:00:1c.1: res[9]=3D[mem 0x00100000-0x001fffff pr= ef] get_res_add_size add_size 200000 > > [ 0.242004] pci 0000:00:1c.2: res[9]=3D[mem 0x00100000-0x001fffff pr= ef] get_res_add_size add_size 200000 > > [ 0.242009] pci 0000:00:1c.3: res[9]=3D[mem 0x00100000-0x001fffff pr= ef] get_res_add_size add_size 200000 > > [ 0.242014] pci 0000:00:1c.0: res[7]=3D[io 0x1000-0x0fff] get_res_a= dd_size add_size 1000 > > [ 0.242024] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801f= ffff] > > [ 0.242171] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803f= ffff 64bit pref] > > [ 0.242417] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x806f= ffff pref] > > [ 0.242660] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80700000-0x809f= ffff pref] > > [ 0.242903] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80a00000-0x80cf= ffff pref] > > [ 0.243148] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] > > [ 0.243290] pci 0000:00:1c.0: PCI bridge to [bus 01] > > [ 0.243429] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > > [ 0.243572] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801f= ffff] > > [ 0.243717] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803f= ffff 64bit pref] > > [ 0.243967] pci 0000:02:00.0: BAR 6: assigned [mem 0x80400000-0x8041= ffff pref] > > [ 0.244216] pci 0000:00:1c.1: PCI bridge to [bus 02] > > [ 0.244355] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] > > [ 0.244497] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52f= ffff] > > [ 0.244642] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x806f= ffff pref] > > [ 0.244889] pci 0000:03:00.0: BAR 6: assigned [mem 0x80700000-0x8071= ffff pref] > > [ 0.245128] pci 0000:00:1c.2: PCI bridge to [bus 03] > > [ 0.245265] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff] > > [ 0.245411] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50f= ffff] > > [ 0.245555] pci 0000:00:1c.2: bridge window [mem 0x80700000-0x809f= ffff pref] > > [ 0.245802] pci 0000:04:00.0: BAR 6: assigned [mem 0x80a00000-0x80a7= ffff pref] > > [ 0.246044] pci 0000:00:1c.3: PCI bridge to [bus 04] > > [ 0.246181] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] > > [ 0.246324] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51f= ffff] > > [ 0.246467] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80cf= ffff pref] > > [ 0.246716] pci 0000:00:1e.0: PCI bridge to [bus 05] > > [ 0.246853] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] > > [ 0.246998] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ff= ffff] > > [ 0.247147] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > > [ 0.247152] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > > [ 0.247156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > > [ 0.247161] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] > > [ 0.247165] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xfebfffff] > > [ 0.247170] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] > > [ 0.247174] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff] > > [ 0.247179] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 6= 4bit pref] > > [ 0.247184] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] > > [ 0.247188] pci_bus 0000:02: resource 1 [mem 0xd5200000-0xd52fffff] > > [ 0.247192] pci_bus 0000:02: resource 2 [mem 0x80400000-0x806fffff p= ref] > > [ 0.247197] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] > > [ 0.247202] pci_bus 0000:03: resource 1 [mem 0xd5000000-0xd50fffff] > > [ 0.247206] pci_bus 0000:03: resource 2 [mem 0x80700000-0x809fffff p= ref] > > [ 0.247211] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] > > [ 0.247215] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd51fffff] > > [ 0.247219] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80cfffff p= ref] > > [ 0.247224] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] > > [ 0.247228] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd4ffffff] > > [ 0.247233] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] > > [ 0.247237] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] > > [ 0.247242] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] > > [ 0.247246] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] > > [ 0.247250] pci_bus 0000:05: resource 8 [mem 0x7f800000-0xfebfffff] > > [ 0.247326] NET: Registered protocol family 2 > > [ 0.248104] TCP established hash table entries: 8192 (order: 3, 3276= 8 bytes) > > [ 0.248323] TCP bind hash table entries: 8192 (order: 6, 294912 byte= s) > > [ 0.249510] TCP: Hash tables configured (established 8192 bind 8192) > > [ 0.249731] TCP: reno registered > > [ 0.249867] UDP hash table entries: 512 (order: 3, 40960 bytes) > > [ 0.250144] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) > > [ 0.250721] NET: Registered protocol family 1 > > [ 0.250882] pci 0000:00:02.0: Boot video device > > [ 1.852022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) = 01010001 > > [ 1.852465] PCI: CLS 32 bytes, default 64 > > [ 1.852853] Unpacking initramfs... > > [ 2.103109] Freeing initrd memory: 6100K (f7406000 - f79fb000) > > [ 2.103891] microcode: CPU0 sig=3D0x6d8, pf=3D0x20, revision=3D0x20 > > [ 2.104297] microcode: Microcode Update Driver: v2.00 , Peter Oruba > > [ 2.105286] audit: initializing netlink socket (disabled) > > [ 2.105504] type=3D2000 audit(1398174179.104:1): initialized > > [ 2.145984] bounce pool size: 64 pages > > [ 2.146121] HugeTLB registered 2 MB page size, pre-allocated 0 pages > > [ 2.146615] VFS: Disk quotas dquot_6.5.2 > > [ 2.146765] Dquot-cache hash table entries: 1024 (order 0, 4096 byte= s) > > [ 2.147322] squashfs: version 4.0 (2009/01/31) Phillip Lougher > > [ 2.147796] fuse init (API version 7.22) > > [ 2.148062] msgmni has been set to 1723 > > [ 2.161978] Block layer SCSI generic (bsg) driver version 0.4 loaded= (major 252) > > [ 2.162254] io scheduler noop registered > > [ 2.162388] io scheduler deadline registered > > [ 2.162527] io scheduler cfq registered (default) > > [ 2.163007] pcieport 0000:00:1c.0: enabling device (0100 -> 0103) > > [ 2.163645] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X > > [ 2.164295] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X > > [ 2.164727] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X > > [ 2.165139] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X > > [ 2.165603] intel_idle: does not run on family 6 model 13 > > [ 2.165824] input: Power Button as /devices/LNXSYSTM:00/device:00/PN= P0C0C:00/input/input0 > > [ 2.166146] ACPI: Power Button [PWRB] > > [ 2.166436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/= input/input1 > > [ 2.166682] ACPI: Power Button [PWRF] > > [ 2.167069] ACPI: Fan [FAN] (on) > > [ 2.167381] ACPI: AOpen i915GMm-HFS detected: disabling all active t= hermal trip points > > [ 2.167622] ACPI: AOpen i915GMm-HFS detected: disabling all passive = thermal trip points > > [ 2.167861] ACPI: AOpen i915GMm-HFS detected: enabling thermal zone = polling > > [ 2.169578] thermal LNXTHERM:00: registered as thermal_zone0 > > [ 2.169717] ACPI: Thermal Zone [THRM] (61 C) > > [ 2.169971] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled > > [ 2.190965] 00:05: ttyS0 at I/O 0x3f8 (irq =3D 4, base_baud =3D 1152= 00) is a 16550A > > [ 2.212060] 00:06: ttyS1 at I/O 0x2f8 (irq =3D 3, base_baud =3D 1152= 00) is a 16550A > > [ 2.216353] lp: driver loaded but no devices found > > [ 2.216724] Non-volatile memory driver v1.3 > > [ 2.216855] Linux agpgart interface v0.103 > > [ 2.217101] agpgart-intel 0000:00:00.0: Intel 915GM Chipset > > [ 2.217336] agpgart-intel 0000:00:00.0: detected gtt size: 262144K t= otal, 262144K mappable > > [ 2.218068] agpgart-intel 0000:00:00.0: detected 8192K stolen memory > > [ 2.218520] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc00= 00000 > > [ 2.218758] [drm] Initialized drm 1.1.0 20060810 > > [ 2.221333] [drm:i915_dump_device_info], i915 device info: gen=3D3, = pciid=3D0x2592 flags=3Dis_mobile,has_fbc,cursor_needs_physical,has_overlay,= overlay_needs_physical,supports_tv, > > [ 2.221459] [drm:intel_detect_pch], No PCH found? > > [ 2.221465] [drm] Memory usable by graphics device =3D 256M > > [ 2.221601] [drm:i915_gem_gtt_init], GMADR size =3D 256M > > [ 2.221604] [drm:i915_gem_gtt_init], GTT stolen size =3D 8M > > [ 2.222858] [drm:intel_opregion_setup], graphic opregion physical ad= dr: 0x0 > > [ 2.222864] [drm:intel_opregion_setup], ACPI OpRegion not supported! > > [ 2.222931] [drm] Supports vblank timestamp caching Rev 2 (21.10.201= 3). > > [ 2.223076] [drm] Driver supports precise vblank timestamp query. > > [ 2.223216] [drm:init_vbt_defaults], Set default to SSC at 100000 kH= z > > [ 2.223653] [drm:parse_general_features], BDB_GENERAL_FEATURES int_t= v_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 96000 display_cl= ock_mode 0 fdi_rx_polarity_inverted 0 > > [ 2.223659] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 > > [ 2.223692] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT= tables: > > [ 2.223698] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768= " 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa > > [ 2.223720] [drm:parse_lfp_panel_data], VBT initial LVDS value 40000= 300 > > [ 2.223733] [drm:parse_lfp_backlight], VBT backlight PWM modulation = frequency 200 Hz, active low, min brightness 0, level 0 > > [ 2.223755] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BI= OS VBT tables: > > [ 2.223761] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768= " 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa > > [ 2.223767] [drm:parse_sdvo_device_mapping], the SDVO device with sl= ave addr 70 is found on SDVOB port > > [ 2.223773] [drm:parse_sdvo_device_mapping], SDVO device: dvo=3D1, a= ddr=3D70, wiring=3D1, ddc_pin=3D29, i2c_pin=3D5 > > [ 2.223777] [drm:parse_sdvo_device_mapping], the SDVO device with sl= ave addr 72 is found on SDVOC port > > [ 2.223782] [drm:parse_sdvo_device_mapping], SDVO device: dvo=3D2, a= ddr=3D72, wiring=3D0, ddc_pin=3D29, i2c_pin=3D5 > > [ 2.223833] [drm:parse_mipi], No MIPI BDB found > > [ 2.223922] [drm:i915_gem_init_stolen], found 8388608 bytes of stole= n memory at 7f800000 > > [ 2.223985] [drm:intel_display_power_get], enabling always-on > > [ 2.224405] [drm:intel_modeset_init], 2 display pipes available. > > [ 2.224508] [drm:intel_crtc_init], swapping pipes & planes for FBC > > [ 2.224512] [drm:intel_modeset_init], pipe A sprite A init failed: -= 19 > > [ 2.224524] [drm:intel_crtc_init], swapping pipes & planes for FBC > > [ 2.224528] [drm:intel_modeset_init], pipe B sprite B init failed: -= 19 > > [ 2.224540] vgaarb: device changed decodes: PCI:0000:00:02.0,olddeco= des=3Dio+mem,decodes=3Dio+mem:owns=3Dio+mem > > [ 2.225123] [drm] Skipping LVDS initialization for AOpen i915GMm-HFS > > [ 2.228383] [drm:intel_setup_outputs], probing SDVOB > > [ 2.228388] [drm:intel_gmbus_force_bit], enabling bit-banging on i91= 5 gmbus dpb. force bit now 1 > > [ 2.301204] [drm:intel_sdvo_debug_write], SDVOB: W: 02 = (SDVO_CMD_GET_DEVICE_CAPS) > > [ 2.313354] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 3= C 06 01 01 01 01 00 > > [ 2.313362] [drm:intel_sdvo_get_capabilities], SDVO capabilities: > > vendor_id: 2 > > device_id: 60 > > device_rev_id: 6 > > sdvo_version_major: 1 > > sdvo_version_minor: 1 > > sdvo_inputs_mask: 1 > > smooth_scaling: 0 > > sharp_scaling: 0 > > up_scaling: 0 > > down_scaling: 0 > > stall_support: 0 > > output_flags: 1 > > [ 2.313376] [drm:intel_sdvo_dvi_init], initialising DVI device 0 > > [ 2.313383] [drm:intel_sdvo_debug_write], SDVOB: W: 0C = (SDVO_CMD_GET_HOT_PLUG_SUPPORT) > > [ 2.318730] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.318736] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 = (SDVO_CMD_SET_ACTIVE_HOT_PLUG) > > [ 2.322303] [drm:intel_sdvo_debug_write], SDVOB: W: 9D = (SDVO_CMD_GET_SUPP_ENCODE) > > [ 2.325385] [drm:intel_sdvo_read_response], SDVOB: R: ... failed > > [ 2.325475] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 = (SDVO_CMD_SET_TARGET_INPUT) > > [ 2.329359] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 2.329365] [drm:intel_sdvo_debug_write], SDVOB: W: 1D = (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE) > > [ 2.336975] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 0= 9 20 4E > > [ 2.336980] [drm:intel_sdvo_init], SDVOB device VID/DID: 02:3C.06, c= lock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N > > [ 2.336985] [drm:intel_setup_outputs], probing SDVOC > > [ 2.336992] [drm:intel_gmbus_force_bit], enabling bit-banging on i91= 5 gmbus dpb. force bit now 2 > > [ 2.409700] [drm:intel_sdvo_debug_write], SDVOC: W: 02 = (SDVO_CMD_GET_DEVICE_CAPS) > > [ 2.421845] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 C= 2 01 01 01 3D 3E 00 > > [ 2.421852] [drm:intel_sdvo_get_capabilities], SDVO capabilities: > > vendor_id: 2 > > device_id: 194 > > device_rev_id: 1 > > sdvo_version_major: 1 > > sdvo_version_minor: 1 > > sdvo_inputs_mask: 1 > > smooth_scaling: 1 > > sharp_scaling: 1 > > up_scaling: 1 > > down_scaling: 1 > > stall_support: 0 > > output_flags: 62 > > [ 2.421866] [drm:intel_sdvo_tv_init], initialising TV type 8 > > [ 2.421959] [drm:intel_sdvo_debug_write], SDVOC: W: 11 08 00 = (SDVO_CMD_SET_TARGET_OUTPUT) > > [ 2.426662] [drm:intel_sdvo_read_response], SDVOC: R: (Success) > > [ 2.426668] [drm:intel_sdvo_debug_write], SDVOC: W: 27 = (SDVO_CMD_GET_SUPPORTED_TV_FORMATS) > > [ 2.436547] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF F= F FF FF FF 1F > > [ 2.436581] [drm:intel_sdvo_debug_write], SDVOC: W: 84 = (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS) > > [ 2.441931] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FA D= F > > [ 2.441937] [drm:intel_sdvo_debug_write], SDVOC: W: 61 = (SDVO_CMD_GET_MAX_OVERSCAN_H) > > [ 2.449558] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 0= 0 20 00 > > [ 2.449564] [drm:intel_sdvo_debug_write], SDVOC: W: 62 = (SDVO_CMD_GET_OVERSCAN_H) > > [ 2.454913] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 0= 0 > > [ 2.454921] [drm:intel_sdvo_create_enhance_property_tv], h_overscan:= max 47, default 32, current 32 > > [ 2.454927] [drm:intel_sdvo_debug_write], SDVOC: W: 64 = (SDVO_CMD_GET_MAX_OVERSCAN_V) > > [ 2.462549] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 0= 0 20 00 > > [ 2.462554] [drm:intel_sdvo_debug_write], SDVOC: W: 65 = (SDVO_CMD_GET_OVERSCAN_V) > > [ 2.467902] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 0= 0 > > [ 2.467909] [drm:intel_sdvo_create_enhance_property_tv], v_overscan:= max 47, default 32, current 32 > > [ 2.467915] [drm:intel_sdvo_debug_write], SDVOC: W: 67 = (SDVO_CMD_GET_MAX_HPOS) > > [ 2.475537] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 0= 3 00 02 > > [ 2.475543] [drm:intel_sdvo_debug_write], SDVOC: W: 68 = (SDVO_CMD_GET_HPOS) > > [ 2.480891] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 0= 2 > > [ 2.480897] [drm:intel_sdvo_create_enhance_property_tv], hpos: max 1= 023, default 512, current 512 > > [ 2.480902] [drm:intel_sdvo_debug_write], SDVOC: W: 6A = (SDVO_CMD_GET_MAX_VPOS) > > [ 2.488523] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 0= 3 00 02 > > [ 2.488529] [drm:intel_sdvo_debug_write], SDVOC: W: 6B = (SDVO_CMD_GET_VPOS) > > [ 2.493875] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 0= 2 > > [ 2.493881] [drm:intel_sdvo_create_enhance_property_tv], vpos: max 1= 023, default 512, current 512 > > [ 2.493886] [drm:intel_sdvo_debug_write], SDVOC: W: 55 = (SDVO_CMD_GET_MAX_SATURATION) > > [ 2.501502] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 0= 0 45 00 > > [ 2.501508] [drm:intel_sdvo_debug_write], SDVOC: W: 56 = (SDVO_CMD_GET_SATURATION) > > [ 2.506857] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 0= 0 > > [ 2.506863] [drm:intel_sdvo_create_enhance_property_tv], saturation:= max 127, default 69, current 69 > > [ 2.506869] [drm:intel_sdvo_debug_write], SDVOC: W: 5E = (SDVO_CMD_GET_MAX_CONTRAST) > > [ 2.514491] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 0= 0 40 00 > > [ 2.514497] [drm:intel_sdvo_debug_write], SDVOC: W: 5F = (SDVO_CMD_GET_CONTRAST) > > [ 2.519846] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 0= 0 > > [ 2.519852] [drm:intel_sdvo_create_enhance_property_tv], contrast: m= ax 127, default 64, current 64 > > [ 2.519857] [drm:intel_sdvo_debug_write], SDVOC: W: 58 = (SDVO_CMD_GET_MAX_HUE) > > [ 2.527473] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 0= 0 40 00 > > [ 2.527479] [drm:intel_sdvo_debug_write], SDVOC: W: 59 = (SDVO_CMD_GET_HUE) > > [ 2.532832] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 0= 0 > > [ 2.532838] [drm:intel_sdvo_create_enhance_property_tv], hue: max 12= 7, default 64, current 64 > > [ 2.532844] [drm:intel_sdvo_debug_write], SDVOC: W: 6D = (SDVO_CMD_GET_MAX_SHARPNESS) > > [ 2.540467] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 0= 0 04 00 > > [ 2.540473] [drm:intel_sdvo_debug_write], SDVOC: W: 6E = (SDVO_CMD_GET_SHARPNESS) > > [ 2.545819] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 0= 0 > > [ 2.545825] [drm:intel_sdvo_create_enhance_property_tv], sharpness: = max 7, default 4, current 4 > > [ 2.545830] [drm:intel_sdvo_debug_write], SDVOC: W: 5B = (SDVO_CMD_GET_MAX_BRIGHTNESS) > > [ 2.553446] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 0= 0 80 00 > > [ 2.553451] [drm:intel_sdvo_debug_write], SDVOC: W: 5C = (SDVO_CMD_GET_BRIGHTNESS) > > [ 2.558797] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 0= 0 > > [ 2.558804] [drm:intel_sdvo_create_enhance_property_tv], brightness:= max 255, default 128, current 128 > > [ 2.558809] [drm:intel_sdvo_debug_write], SDVOC: W: 7B = (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE) > > [ 2.566432] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 0= 0 07 00 > > [ 2.566438] [drm:intel_sdvo_debug_write], SDVOC: W: 50 = (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE) > > [ 2.571783] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 0= 0 > > [ 2.571789] [drm:intel_sdvo_create_enhance_property_tv], flicker_fil= ter_adaptive: max 7, default 7, current 7 > > [ 2.571795] [drm:intel_sdvo_debug_write], SDVOC: W: 74 = (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER) > > [ 2.579413] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 0= 0 01 00 > > [ 2.579418] [drm:intel_sdvo_debug_write], SDVOC: W: 75 = (SDVO_CMD_GET_TV_CHROMA_FILTER) > > [ 2.584769] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 0= 0 > > [ 2.584775] [drm:intel_sdvo_create_enhance_property_tv], tv_chroma_f= ilter: max 3, default 1, current 1 > > [ 2.584781] [drm:intel_sdvo_debug_write], SDVOC: W: 77 = (SDVO_CMD_GET_MAX_TV_LUMA_FILTER) > > [ 2.592397] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 0= 0 00 00 > > [ 2.592402] [drm:intel_sdvo_debug_write], SDVOC: W: 78 = (SDVO_CMD_GET_TV_LUMA_FILTER) > > [ 2.597751] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 0= 0 > > [ 2.597757] [drm:intel_sdvo_create_enhance_property_tv], tv_luma_fil= ter: max 2, default 0, current 0 > > [ 2.597763] [drm:intel_sdvo_debug_write], SDVOC: W: 70 = (SDVO_CMD_GET_DOT_CRAWL) > > [ 2.603112] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 0= 0 > > [ 2.603118] [drm:intel_sdvo_create_enhance_property_tv], dot crawl: = current 0 > > [ 2.603121] [drm:intel_sdvo_tv_init], initialising TV type 4 > > [ 2.603235] ------------[ cut here ]------------ > > [ 2.603371] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_= dup+0x68/0x7a() > > [ 2.603605] sysfs: cannot create duplicate filename '/devices/pci000= 0:00/0000:00:02.0/i2c-7/i2c-7' > > [ 2.603841] Modules linked in: > > [ 2.603992] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-main-0106= 4-gd978ef1 #131 > > [ 2.604232] Hardware name: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005 > > [ 2.604367] 00000000 f6079c64 f6079c3c c055593e f6079c54 c012a6a9 c= 022bc73 f6366000 > > [ 2.604781] f6366000 f6367200 f6079c6c c012a6eb 00000009 f6079c64 c= 06f0720 f6079c80 > > [ 2.605194] f6079c90 c022bc73 c06f06d0 000001e6 c06f0720 f6366000 f= 6367200 f6371c00 > > [ 2.605606] Call Trace: > > [ 2.605736] [] dump_stack+0x16/0x18 > > [ 2.605871] [] warn_slowpath_common+0x5f/0x76 > > [ 2.606005] [] ? sysfs_warn_dup+0x68/0x7a > > [ 2.606139] [] warn_slowpath_fmt+0x2b/0x2f > > [ 2.606273] [] sysfs_warn_dup+0x68/0x7a > > [ 2.606407] [] sysfs_add_one+0x25/0x2c > > [ 2.606541] [] sysfs_do_create_link_sd.isra.2+0xc4/0x136 > > [ 2.606678] [] sysfs_create_link+0x24/0x2e > > [ 2.606814] [] intel_sdvo_connector_init+0x82/0xa2 > > [ 2.606950] [] intel_sdvo_tv_init+0x81/0x1cf > > [ 2.607086] [] intel_sdvo_init+0x2ef/0x658 > > [ 2.607221] [] ? drm_ut_debug_printk+0x41/0x55 > > [ 2.607358] [] intel_modeset_init+0xabd/0xdae > > [ 2.607494] [] ? preempt_count_sub+0xa8/0xb5 > > [ 2.607630] [] ? _raw_spin_unlock_irqrestore+0x44/0x56 > > [ 2.607768] [] ? i915_irq_postinstall+0xee/0xf8 > > [ 2.607903] [] ? drm_irq_install+0x155/0x1b5 > > [ 2.608046] [] ? i965_irq_handler+0x480/0x480 > > [ 2.608181] [] i915_driver_load+0xa53/0xcc3 > > [ 2.608318] [] drm_dev_register+0xb8/0x11b > > [ 2.608452] [] drm_get_pci_dev+0xec/0x18a > > [ 2.608587] [] i915_pci_probe+0x3e/0x47 > > [ 2.608722] [] pci_device_probe+0x5c/0xa4 > > [ 2.608857] [] driver_probe_device+0x83/0x17a > > [ 2.608991] [] __driver_attach+0x53/0x6f > > [ 2.609127] [] bus_for_each_dev+0x58/0x67 > > [ 2.609261] [] driver_attach+0x19/0x1b > > [ 2.609394] [] ? __device_attach+0x31/0x31 > > [ 2.609528] [] bus_add_driver+0xd4/0x18b > > [ 2.609661] [] driver_register+0x74/0xa9 > > [ 2.609795] [] __pci_register_driver+0x4a/0x4d > > [ 2.609932] [] ? ftrace_define_fields_drm_vblank_event_de= livered+0x65/0x65 > > [ 2.610168] [] drm_pci_init+0x56/0xc9 > > [ 2.610302] [] ? ftrace_define_fields_drm_vblank_event_de= livered+0x65/0x65 > > [ 2.610538] [] i915_init+0x62/0x64 > > [ 2.610670] [] do_one_initcall+0x7c/0x105 > > [ 2.610805] [] ? do_early_param+0x3d/0x73 > > [ 2.610940] [] ? parse_args+0x16c/0x203 > > [ 2.611074] [] kernel_init_freeable+0xdb/0x158 > > [ 2.611210] [] kernel_init+0xd/0xdf > > [ 2.611344] [] ret_from_kernel_thread+0x1b/0x28 > > [ 2.611479] [] ? rest_init+0xa5/0xa5 > > [ 2.611666] ---[ end trace cd346fb3f5b5c52d ]--- > > [ 2.613964] [drm:intel_sdvo_init], SDVO output failed to setup on SD= VOC > > [ 2.614565] [drm:intel_gmbus_force_bit], disabling bit-banging on i9= 15 gmbus dpb. force bit now 1 > > [ 2.614731] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state = readout: enabled > > [ 2.614737] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state = readout: disabled > > [ 2.614743] [drm:intel_modeset_readout_hw_state], [ENCODER:6:DAC-6] = hw state readout: disabled, pipe A > > [ 2.614750] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.620297] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.620304] [drm:intel_sdvo_debug_write], SDVOB: W: 12 = (SDVO_CMD_GET_INPUT_TIMINGS_PART1) > > [ 2.632814] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0= B D0 B4 20 90 31 10 > > [ 2.632820] [drm:intel_sdvo_debug_write], SDVOB: W: 13 = (SDVO_CMD_GET_INPUT_TIMINGS_PART2) > > [ 2.645339] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6= C C2 00 1C 00 00 00 > > [ 2.645346] [drm:intel_sdvo_debug_write], SDVOB: W: 20 = (SDVO_CMD_GET_CLOCK_RATE_MULT) > > [ 2.649684] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08 > > [ 2.649688] [drm:intel_modeset_readout_hw_state], [ENCODER:7:TMDS-7]= hw state readout: enabled, pipe A > > [ 2.649694] [drm:intel_modeset_readout_hw_state], [ENCODER:10:TV-10]= hw state readout: disabled, pipe A > > [ 2.649700] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:VGA-1= ] hw state readout: disabled > > [ 2.649706] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.655201] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.655205] [drm:intel_modeset_readout_hw_state], [CONNECTOR:8:DVI-D= -1] hw state readout: enabled > > [ 2.655210] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:SVIDE= O-1] hw state readout: disabled > > [ 2.655213] [drm:intel_modeset_setup_hw_state], [CRTC:3] found activ= e mode:=20 > > [ 2.655219] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 2832= 0 720 765 873 900 400 412 414 449 0x0 0x6 > > [ 2.655227] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] c= onfig for pipe A > > [ 2.655230] [drm:intel_dump_pipe_config], cpu_transcoder: A > > [ 2.655234] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 > > [ 2.655239] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch= _m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > > [ 2.655243] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: = 0, link_m: 0, link_n: 0, tu: 0 > > [ 2.655247] [drm:intel_dump_pipe_config], requested mode: > > [ 2.655252] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 72= 0 0 0 0 400 0 0 0 0x0 0x0 > > [ 2.655255] [drm:intel_dump_pipe_config], adjusted mode: > > [ 2.655260] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 = 0 0 0 0 0 0 0 0x0 0x6 > > [ 2.655266] [drm:intel_dump_crtc_timings], crtc timings: 28320 720 7= 65 873 900 400 412 414 449, type: 0x0 flags: 0x6 > > [ 2.655269] [drm:intel_dump_pipe_config], port clock: 113280 > > [ 2.655273] [drm:intel_dump_pipe_config], pipe src size: 720x400 > > [ 2.655277] [drm:intel_dump_pipe_config], gmch pfit: control: 0x0000= 0000, ratios: 0x00000000, lvds border: 0x00000000 > > [ 2.655281] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,= size: 0x00000000, disabled > > [ 2.655284] [drm:intel_dump_pipe_config], ips: 0 > > [ 2.655288] [drm:intel_dump_pipe_config], double wide: 0 > > [ 2.655293] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] c= onfig for pipe B > > [ 2.655297] [drm:intel_dump_pipe_config], cpu_transcoder: B > > [ 2.655300] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 > > [ 2.655305] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch= _m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > > [ 2.655309] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: = 0, link_m: 0, link_n: 0, tu: 0 > > [ 2.655313] [drm:intel_dump_pipe_config], requested mode: > > [ 2.655318] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 = 0 0 0 0 0 0 0 0x0 0x0 > > [ 2.655321] [drm:intel_dump_pipe_config], adjusted mode: > > [ 2.655326] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 = 0 0 0 0 0 0 0 0x0 0x0 > > [ 2.655331] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0= 0 0 0, type: 0x0 flags: 0x0 > > [ 2.655335] [drm:intel_dump_pipe_config], port clock: 0 > > [ 2.655338] [drm:intel_dump_pipe_config], pipe src size: 0x0 > > [ 2.655342] [drm:intel_dump_pipe_config], gmch pfit: control: 0x0000= 0000, ratios: 0x00000000, lvds border: 0x00000000 > > [ 2.655346] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,= size: 0x00000000, disabled > > [ 2.655349] [drm:intel_dump_pipe_config], ips: 0 > > [ 2.655353] [drm:intel_dump_pipe_config], double wide: 0 > > [ 2.655361] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.660867] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.660871] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1] > > [ 2.660877] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.666381] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.666386] [drm:check_encoder_state], [ENCODER:6:DAC-6] > > [ 2.666392] [drm:check_encoder_state], [ENCODER:7:TMDS-7] > > [ 2.666398] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.671900] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.671904] [drm:check_encoder_state], [ENCODER:10:TV-10] > > [ 2.671909] [drm:check_crtc_state], [CRTC:3] > > [ 2.671925] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.677425] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.677431] [drm:intel_sdvo_debug_write], SDVOB: W: 12 = (SDVO_CMD_GET_INPUT_TIMINGS_PART1) > > [ 2.689935] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0= B D0 B4 20 90 31 10 > > [ 2.689941] [drm:intel_sdvo_debug_write], SDVOB: W: 13 = (SDVO_CMD_GET_INPUT_TIMINGS_PART2) > > [ 2.702442] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6= C C2 00 1C 00 00 00 > > [ 2.702449] [drm:intel_sdvo_debug_write], SDVOB: W: 20 = (SDVO_CMD_GET_CLOCK_RATE_MULT) > > [ 2.706782] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08 > > [ 2.706787] [drm:check_crtc_state], [CRTC:4] > > [ 2.706799] [drm:i9xx_get_plane_config], pipe/plane 0/1 with fb: siz= e=3D720x400@32, offset=3D0, pitch 3200, size 0x139000 > > [ 2.706804] [drm:i915_gem_object_create_stolen_for_preallocated], cr= eating preallocated stolen object: stolen_offset=3D0, gtt_offset=3D0, size= =3D139000 > > [ 2.706879] [drm:i915_pages_create_for_stolen], offset=3D0x0, size= =3D1282048 > > [ 2.706966] [drm:intel_alloc_plane_obj], plane fb obj f6373e40 > > [ 2.706972] [drm:i915_gem_setup_global_gtt], reserving preallocated = space: 0 + 139000 > > [ 2.706976] [drm:i915_gem_setup_global_gtt], clearing unused GTT spa= ce: [139000, ffff000] > > [ 2.709450] [drm:i915_gem_object_create_stolen], creating stolen obj= ect: size=3D20000 > > [ 2.709471] [drm:i915_pages_create_for_stolen], offset=3D0x139000, s= ize=3D131072 > > [ 2.709884] [drm] initialized overlay support > > [ 2.710017] [drm:intel_fbdev_init_bios], found possible fb from plan= e A > > [ 2.710020] [drm:intel_fbdev_init_bios], pipe B not active or no fb,= skipping > > [ 2.710024] [drm:intel_fbdev_init_bios], checking plane A for BIOS f= b > > [ 2.710028] [drm:intel_fbdev_init_bios], pipe A area: 288000 > > [ 2.710031] [drm:intel_fbdev_init_bios], total size 1152000 (bpp 4) > > [ 2.710035] [drm:intel_fbdev_init_bios], fb big enough for plane A (= 1282048 >=3D 1152000) > > [ 2.710039] [drm:intel_fbdev_init_bios], pipe B not active, skipping > > [ 2.710044] [drm:intel_fbdev_init_bios], using BIOS fb for initial c= onsole > > [ 2.710054] [drm:drm_helper_probe_single_connector_modes], [CONNECTO= R:5:VGA-1] > > [ 2.710059] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=3D1 > > [ 2.712024] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0= 050 r(1) > > [ 2.712028] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent = adapter i915 gmbus vga > > [ 2.712032] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, re= try using GPIO bit-banging > > [ 2.712036] [drm:intel_gmbus_force_bit], enabling bit-banging on i91= 5 gmbus vga. force bit now 1 > > [ 2.712368] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent = adapter i915 gmbus vga > > [ 2.712372] [drm:intel_gmbus_force_bit], disabling bit-banging on i9= 15 gmbus vga. force bit now 0 > > [ 2.712375] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x5= 0 [no valid EDID found] > > [ 2.712380] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [= ENCODER:6:DAC-6] > > [ 2.712402] [drm:intel_get_load_detect_pipe], creating tmp fb for lo= ad-detection > > [ 2.712499] [drm:intel_modeset_affected_pipes], set mode pipe masks:= modeset: 2, prepare: 2, disable: 0 > > [ 2.712505] [drm:connected_sink_compute_bpp], [CONNECTOR:5:VGA-1] ch= ecking for sink bpp constrains > > [ 2.712533] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp= : 24, dithering: 0 > > [ 2.712537] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config f= or pipe B > > [ 2.712541] [drm:intel_dump_pipe_config], cpu_transcoder: B > > [ 2.712544] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 > > [ 2.712549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch= _m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > > [ 2.712553] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: = 0, link_m: 0, link_n: 0, tu: 0 > > [ 2.712557] [drm:intel_dump_pipe_config], requested mode: > > [ 2.712562] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480"= 0 31500 640 664 704 832 480 489 491 520 0x10 0xa > > [ 2.712566] [drm:intel_dump_pipe_config], adjusted mode: > > [ 2.712571] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480"= 0 31500 640 664 704 832 480 489 491 520 0x10 0xa > > [ 2.712577] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 6= 64 704 832 480 489 491 520, type: 0x10 flags: 0xa > > [ 2.712580] [drm:intel_dump_pipe_config], port clock: 31500 > > [ 2.712584] [drm:intel_dump_pipe_config], pipe src size: 640x480 > > [ 2.712588] [drm:intel_dump_pipe_config], gmch pfit: control: 0x0000= 0000, ratios: 0x00000000, lvds border: 0x00000000 > > [ 2.712592] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,= size: 0x00000000, disabled > > [ 2.712595] [drm:intel_dump_pipe_config], ips: 0 > > [ 2.712599] [drm:intel_dump_pipe_config], double wide: 0 > > [ 2.714954] [drm:i9xx_update_plane], Writing base 00160000 00000000 = 0 0 2560 > > [ 2.714960] [drm:intel_update_fbc], disabled per chip default > > [ 2.714967] [drm:intel_crtc_mode_set], [ENCODER:6:DAC-6] set [MODE:0= :640x480] > > [ 2.715720] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28 > > [ 2.715725] [drm:intel_calculate_wm], FIFO entries required for mode= : 10 > > [ 2.715728] [drm:intel_calculate_wm], FIFO watermark level: 16 > > [ 2.715733] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31 > > [ 2.715736] [drm:intel_calculate_wm], FIFO entries required for mode= : 9 > > [ 2.715739] [drm:intel_calculate_wm], FIFO watermark level: 20 > > [ 2.715743] [drm:i9xx_update_wm], FIFO watermarks - A: 16, B: 20 > > [ 2.715748] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 16, B= : 20, C: 2, SR 1 > > [ 2.715752] [drm:i9xx_update_wm], memory self refresh disabled > > [ 2.736020] [drm:intel_update_fbc], more than one pipe active, disab= ling compression > > [ 2.736030] [drm:intel_connector_check_state], [CONNECTOR:5:VGA-1] > > [ 2.736037] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.741571] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.741575] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1] > > [ 2.741582] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.747093] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.747098] [drm:check_encoder_state], [ENCODER:6:DAC-6] > > [ 2.747104] [drm:check_encoder_state], [ENCODER:7:TMDS-7] > > [ 2.747110] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.752626] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.752630] [drm:check_encoder_state], [ENCODER:10:TV-10] > > [ 2.752635] [drm:check_crtc_state], [CRTC:3] > > [ 2.752652] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.758158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.758164] [drm:intel_sdvo_debug_write], SDVOB: W: 12 = (SDVO_CMD_GET_INPUT_TIMINGS_PART1) > > [ 2.770686] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0= B D0 B4 20 90 31 10 > > [ 2.770692] [drm:intel_sdvo_debug_write], SDVOB: W: 13 = (SDVO_CMD_GET_INPUT_TIMINGS_PART2) > > [ 2.783214] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6= C C2 00 1C 00 00 00 > > [ 2.783220] [drm:intel_sdvo_debug_write], SDVOB: W: 20 = (SDVO_CMD_GET_CLOCK_RATE_MULT) > > [ 2.787557] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08 > > [ 2.787561] [drm:check_crtc_state], [CRTC:4] > > [ 2.804021] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0= 050 r(1) > > [ 2.804025] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent = adapter i915 gmbus vga > > [ 2.804029] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, re= try using GPIO bit-banging > > [ 2.804033] [drm:intel_gmbus_force_bit], enabling bit-banging on i91= 5 gmbus vga. force bit now 1 > > [ 2.804374] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent = adapter i915 gmbus vga > > [ 2.804378] [drm:intel_gmbus_force_bit], disabling bit-banging on i9= 15 gmbus vga. force bit now 0 > > [ 2.804382] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x5= 0 [no valid EDID found] > > [ 2.804385] [drm:intel_crt_load_detect], starting load-detect on CRT > > [ 2.812019] [drm:intel_release_load_detect_pipe], [CONNECTOR:5:VGA-1= ], [ENCODER:6:DAC-6] > > [ 2.812024] [drm:intel_modeset_affected_pipes], set mode pipe masks:= modeset: 0, prepare: 0, disable: 2 > > [ 2.844985] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28 > > [ 2.844990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31 > > [ 2.844993] [drm:intel_calculate_wm], FIFO entries required for mode= : 9 > > [ 2.844997] [drm:intel_calculate_wm], FIFO watermark level: 20 > > [ 2.845000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20 > > [ 2.845004] [drm:i9xx_update_wm], self-refresh entries: 45 > > [ 2.845009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B= : 20, C: 2, SR 50 > > [ 2.845014] [drm:i9xx_update_wm], memory self refresh enabled > > [ 2.845017] [drm:intel_update_fbc], disabled per chip default > > [ 2.845031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.850537] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.850541] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1] > > [ 2.850548] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.856056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.856061] [drm:check_encoder_state], [ENCODER:6:DAC-6] > > [ 2.856066] [drm:check_encoder_state], [ENCODER:7:TMDS-7] > > [ 2.856073] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.861589] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.861593] [drm:check_encoder_state], [ENCODER:10:TV-10] > > [ 2.861597] [drm:check_crtc_state], [CRTC:3] > > [ 2.861613] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 2.867118] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.867124] [drm:intel_sdvo_debug_write], SDVOB: W: 12 = (SDVO_CMD_GET_INPUT_TIMINGS_PART1) > > [ 2.879645] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0= B D0 B4 20 90 31 10 > > [ 2.879650] [drm:intel_sdvo_debug_write], SDVOB: W: 13 = (SDVO_CMD_GET_INPUT_TIMINGS_PART2) > > [ 2.892173] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6= C C2 00 1C 00 00 00 > > [ 2.892179] [drm:intel_sdvo_debug_write], SDVOB: W: 20 = (SDVO_CMD_GET_CLOCK_RATE_MULT) > > [ 2.896517] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08 > > [ 2.896521] [drm:check_crtc_state], [CRTC:4] > > [ 2.896657] [drm:drm_helper_probe_single_connector_modes], [CONNECTO= R:5:VGA-1] disconnected > > [ 2.896662] [drm:drm_helper_probe_single_connector_modes], [CONNECTO= R:8:DVI-D-1] > > [ 2.896666] [drm:intel_sdvo_detect], [CONNECTOR:8:DVI-D-1] > > [ 2.896672] [drm:intel_sdvo_debug_write], SDVOB: W: 0B = (SDVO_CMD_GET_ATTACHED_DISPLAYS) > > [ 2.902454] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 2.902458] [drm:intel_sdvo_detect], SDVO response 1 0 [1] > > [ 2.902465] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 = (SDVO_CMD_SET_CONTROL_BUS_SWITCH) > > [ 2.906363] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 = (SDVO_CMD_SET_CONTROL_BUS_SWITCH) > > [ 2.943050] [drm:intel_sdvo_get_ddc_modes], [CONNECTOR:8:DVI-D-1] > > [ 2.943057] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 = (SDVO_CMD_SET_CONTROL_BUS_SWITCH) > > [ 2.946942] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 = (SDVO_CMD_SET_CONTROL_BUS_SWITCH) > > [ 2.983605] [drm:intel_sdvo_connector_matches_edid], connector_is_di= gital? 1, monitor_is_digital? 1 > > [ 2.983626] [drm:drm_helper_probe_single_connector_modes], [CONNECTO= R:8:DVI-D-1] probed modes : > > [ 2.983633] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x10= 24" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 > > [ 2.983639] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x76= 8" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa > > [ 2.983645] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600= " 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 > > [ 2.983651] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480= " 60 25200 640 656 752 800 480 490 492 525 0x40 0xa > > [ 2.983657] [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400= " 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 > > [ 2.983661] [drm:drm_helper_probe_single_connector_modes], [CONNECTO= R:9:SVIDEO-1] > > [ 2.983665] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=3D1 > > [ 2.983670] [drm:intel_get_load_detect_pipe], [CONNECTOR:9:SVIDEO-1]= , [ENCODER:10:TV-10] > > [ 2.983674] [drm:intel_get_load_detect_pipe], creating tmp fb for lo= ad-detection > > [ 2.983693] [drm:intel_modeset_affected_pipes], set mode pipe masks:= modeset: 2, prepare: 2, disable: 0 > > [ 2.983699] [drm:connected_sink_compute_bpp], [CONNECTOR:9:SVIDEO-1]= checking for sink bpp constrains > > [ 2.983703] [drm:intel_tv_compute_config], forcing bpc to 8 for TV > > [ 2.983709] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp= : 24, dithering: 0 > > [ 2.983713] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config f= or pipe B > > [ 2.983716] [drm:intel_dump_pipe_config], cpu_transcoder: B > > [ 2.983720] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 > > [ 2.983724] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch= _m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > > [ 2.983729] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: = 0, link_m: 0, link_n: 0, tu: 0 > > [ 2.983732] [drm:intel_dump_pipe_config], requested mode: > > [ 2.983738] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480= i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 > > [ 2.983741] [drm:intel_dump_pipe_config], adjusted mode: > > [ 2.983747] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480= i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 > > [ 2.983752] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280= 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0 > > [ 2.983756] [drm:intel_dump_pipe_config], port clock: 108000 > > [ 2.983760] [drm:intel_dump_pipe_config], pipe src size: 1280x1024 > > [ 2.983764] [drm:intel_dump_pipe_config], gmch pfit: control: 0x0000= 0000, ratios: 0x00000000, lvds border: 0x00000000 > > [ 2.983768] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,= size: 0x00000000, disabled > > [ 2.983771] [drm:intel_dump_pipe_config], ips: 0 > > [ 2.983774] [drm:intel_dump_pipe_config], double wide: 0 > > [ 2.993290] [drm:i9xx_update_plane], Writing base 00160000 00000000 = 0 0 5120 > > [ 2.993305] [drm:intel_crtc_mode_set], [ENCODER:10:TV-10] set [MODE:= 0:NTSC 480i] > > [ 2.999122] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28 > > [ 2.999126] [drm:intel_calculate_wm], FIFO entries required for mode= : 34 > > [ 2.999130] [drm:intel_calculate_wm], FIFO watermark level: -8 > > [ 2.999134] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31 > > [ 2.999138] [drm:intel_calculate_wm], FIFO entries required for mode= : 9 > > [ 2.999141] [drm:intel_calculate_wm], FIFO watermark level: 20 > > [ 2.999145] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 20 > > [ 2.999150] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B:= 20, C: 2, SR 1 > > [ 2.999154] [drm:i9xx_update_wm], memory self refresh disabled > > [ 3.020020] [drm:intel_update_fbc], more than one pipe active, disab= ling compression > > [ 3.020035] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.025549] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.025554] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1] > > [ 3.025560] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.031068] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.031073] [drm:intel_connector_check_state], [CONNECTOR:9:SVIDEO-1= ] > > [ 3.031078] [drm:check_encoder_state], [ENCODER:6:DAC-6] > > [ 3.031084] [drm:check_encoder_state], [ENCODER:7:TMDS-7] > > [ 3.031090] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.036595] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.036599] [drm:check_encoder_state], [ENCODER:10:TV-10] > > [ 3.036603] [drm:check_crtc_state], [CRTC:3] > > [ 3.036621] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.042131] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.042137] [drm:intel_sdvo_debug_write], SDVOB: W: 12 = (SDVO_CMD_GET_INPUT_TIMINGS_PART1) > > [ 3.054659] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0= B D0 B4 20 90 31 10 > > [ 3.054665] [drm:intel_sdvo_debug_write], SDVOB: W: 13 = (SDVO_CMD_GET_INPUT_TIMINGS_PART2) > > [ 3.067186] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6= C C2 00 1C 00 00 00 > > [ 3.067192] [drm:intel_sdvo_debug_write], SDVOB: W: 20 = (SDVO_CMD_GET_CLOCK_RATE_MULT) > > [ 3.071529] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08 > > [ 3.071535] [drm:check_crtc_state], [CRTC:4] > > [ 3.100115] tsc: Refined TSC clocksource calibration: 1862.713 MHz > > [ 3.108021] [drm:intel_tv_detect_type], TV detected: 400c0c07, 7f000= 0aa > > [ 3.108025] [drm:intel_tv_detect_type], Unrecognised TV connection > > [ 3.140020] [drm:intel_release_load_detect_pipe], [CONNECTOR:9:SVIDE= O-1], [ENCODER:10:TV-10] > > [ 3.140026] [drm:intel_modeset_affected_pipes], set mode pipe masks:= modeset: 0, prepare: 0, disable: 2 > > [ 3.184984] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28 > > [ 3.184989] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31 > > [ 3.184993] [drm:intel_calculate_wm], FIFO entries required for mode= : 9 > > [ 3.184996] [drm:intel_calculate_wm], FIFO watermark level: 20 > > [ 3.185000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20 > > [ 3.185004] [drm:i9xx_update_wm], self-refresh entries: 45 > > [ 3.185009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B= : 20, C: 2, SR 50 > > [ 3.185013] [drm:i9xx_update_wm], memory self refresh enabled > > [ 3.185017] [drm:intel_update_fbc], disabled per chip default > > [ 3.185031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.190539] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.190544] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1] > > [ 3.190550] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.196056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.196061] [drm:check_encoder_state], [ENCODER:6:DAC-6] > > [ 3.196066] [drm:check_encoder_state], [ENCODER:7:TMDS-7] > > [ 3.196072] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.201576] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.201580] [drm:check_encoder_state], [ENCODER:10:TV-10] > > [ 3.201584] [drm:check_crtc_state], [CRTC:3] > > [ 3.201600] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.207107] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.207113] [drm:intel_sdvo_debug_write], SDVOB: W: 12 = (SDVO_CMD_GET_INPUT_TIMINGS_PART1) > > [ 3.219632] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0= B D0 B4 20 90 31 10 > > [ 3.219638] [drm:intel_sdvo_debug_write], SDVOB: W: 13 = (SDVO_CMD_GET_INPUT_TIMINGS_PART2) > > [ 3.232158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6= C C2 00 1C 00 00 00 > > [ 3.232165] [drm:intel_sdvo_debug_write], SDVOB: W: 20 = (SDVO_CMD_GET_CLOCK_RATE_MULT) > > [ 3.236510] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08 > > [ 3.236515] [drm:check_crtc_state], [CRTC:4] > > [ 3.236626] [drm:drm_helper_probe_single_connector_modes], [CONNECTO= R:9:SVIDEO-1] disconnected > > [ 3.236631] [drm:drm_setup_crtcs],=20 > > [ 3.236635] [drm:drm_enable_connectors], connector 5 enabled? no > > [ 3.236639] [drm:drm_enable_connectors], connector 8 enabled? yes > > [ 3.236643] [drm:drm_enable_connectors], connector 9 enabled? no > > [ 3.236647] [drm:intel_fb_initial_config], connector 5 not enabled, = skipping > > [ 3.236651] [drm:intel_fb_initial_config], looking for cmdline mode = on connector 8 > > [ 3.236655] [drm:intel_fb_initial_config], looking for preferred mod= e on connector 8 > > [ 3.236659] [drm:intel_fb_initial_config], connector DVI-D-1 on crtc= 3: 1280x1024 > > [ 3.236663] [drm:intel_fb_initial_config], connector 9 not enabled, = skipping > > [ 3.236667] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crt= c 3 > > [ 3.236676] [drm:intelfb_create], re-using BIOS fb > > [ 3.236892] [drm:intelfb_create], allocated 720x400 fb: 0x00000000, = bo f6373e40 > > [ 3.237675] fbcon: inteldrmfb (fb0) is primary device > > [ 3.241496] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connector= s=3D1 (x y) (0 0) > > [ 3.241501] [drm:intel_set_config_compute_mode_changes], modes are d= ifferent, full mode set > > [ 3.241506] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 2832= 0 720 765 873 900 400 412 414 449 0x0 0x6 > > [ 3.241510] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x10= 24" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 > > [ 3.241512] [drm:intel_set_config_compute_mode_changes], computed ch= anges for [CRTC:3], mode_changed=3D1, fb_changed=3D0 > > [ 3.241515] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI= -D-1] to [CRTC:3] > > [ 3.241519] [drm:intel_modeset_affected_pipes], set mode pipe masks:= modeset: 1, prepare: 1, disable: 0 > > [ 3.241523] [drm:connected_sink_compute_bpp], [CONNECTOR:8:DVI-D-1] = checking for sink bpp constrains > > [ 3.241526] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SD= VO > > [ 3.241540] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp= : 24, dithering: 0 > > [ 3.241542] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config f= or pipe A > > [ 3.241544] [drm:intel_dump_pipe_config], cpu_transcoder: A > > [ 3.241546] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 > > [ 3.241549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch= _m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > > [ 3.241551] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: = 0, link_m: 0, link_n: 0, tu: 0 > > [ 3.241553] [drm:intel_dump_pipe_config], requested mode: > > [ 3.241557] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x102= 4" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 > > [ 3.241559] [drm:intel_dump_pipe_config], adjusted mode: > > [ 3.241562] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x102= 4" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 > > [ 3.241566] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280= 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 > > [ 3.241568] [drm:intel_dump_pipe_config], port clock: 108000 > > [ 3.241570] [drm:intel_dump_pipe_config], pipe src size: 1280x1024 > > [ 3.241572] [drm:intel_dump_pipe_config], gmch pfit: control: 0x0000= 0000, ratios: 0x00000000, lvds border: 0x00000000 > > [ 3.241575] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,= size: 0x00000000, disabled > > [ 3.241576] [drm:intel_dump_pipe_config], ips: 0 > > [ 3.241578] [drm:intel_dump_pipe_config], double wide: 0 > > [ 3.241583] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 = (SDVO_CMD_SET_ACTIVE_OUTPUTS) > > [ 3.246688] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.260987] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28 > > [ 3.260990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31 > > [ 3.260992] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29 > > [ 3.260995] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B= : 29, C: 2, SR 1 > > [ 3.260998] [drm:i9xx_update_wm], memory self refresh disabled > > [ 3.260999] [drm:intel_update_fbc], no output, disabling > > [ 3.261240] [drm:i9xx_update_plane], Writing base 00000000 00000000 = 0 0 3200 > > [ 3.261248] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:= 0:1280x1024] > > [ 3.261253] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 = (SDVO_CMD_SET_IN_OUT_MAP) > > [ 3.268071] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.268075] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 = (SDVO_CMD_SET_TARGET_OUTPUT) > > [ 3.273147] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.273153] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 5= 1 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) > > [ 3.283457] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.283462] [drm:intel_sdvo_debug_write], SDVOB: W: 17 30 70 13 00 1= E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2) > > [ 3.293770] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.293775] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 = (SDVO_CMD_SET_TARGET_INPUT) > > [ 3.297977] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.297982] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 = (SDVO_CMD_SET_ENCODE) > > [ 3.302181] [drm:intel_sdvo_read_response], SDVOB: R: ... failed > > [ 3.302187] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 5= 1 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) > > [ 3.312503] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.312508] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1= E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) > > [ 3.322809] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.322814] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 = (SDVO_CMD_SET_CLOCK_RATE_MULT) > > [ 3.327010] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.327784] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28 > > [ 3.327787] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31 > > [ 3.327789] [drm:intel_calculate_wm], FIFO entries required for mode= : 34 > > [ 3.327791] [drm:intel_calculate_wm], FIFO watermark level: -5 > > [ 3.327793] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1 > > [ 3.327795] [drm:i9xx_update_wm], self-refresh entries: 80 > > [ 3.327798] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B= : 1, C: 2, SR 15 > > [ 3.327802] [drm:i9xx_update_wm], memory self refresh enabled > > [ 3.348019] [drm:intel_update_fbc], disabled per chip default > > [ 3.380022] [drm:intel_sdvo_debug_write], SDVOB: W: 03 = (SDVO_CMD_GET_TRAINED_INPUTS) > > [ 3.384583] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 > > [ 3.384587] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 = (SDVO_CMD_SET_ACTIVE_OUTPUTS) > > [ 3.389658] [drm:intel_sdvo_read_response], SDVOB: R: (Success) > > [ 3.389666] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.395449] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.395451] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1] > > [ 3.395456] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.401241] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.401245] [drm:check_encoder_state], [ENCODER:6:DAC-6] > > [ 3.401249] [drm:check_encoder_state], [ENCODER:7:TMDS-7] > > [ 3.401254] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.407033] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.407036] [drm:check_encoder_state], [ENCODER:10:TV-10] > > [ 3.407038] [drm:check_crtc_state], [CRTC:3] > > [ 3.407056] [drm:intel_sdvo_debug_write], SDVOB: W: 04 = (SDVO_CMD_GET_ACTIVE_OUTPUTS) > > [ 3.412852] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 0= 0 > > [ 3.412857] [drm:intel_sdvo_debug_write], SDVOB: W: 12 = (SDVO_CMD_GET_INPUT_TIMINGS_PART1) > > [ 3.426023] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 2= A 00 98 51 00 2A 40 > > [ 3.426028] [drm:intel_sdvo_debug_write], SDVOB: W: 13 = (SDVO_CMD_GET_INPUT_TIMINGS_PART2) > > [ 3.439507] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 7= 0 13 00 1E 00 00 00 > > [ 3.439512] [drm:intel_sdvo_debug_write], SDVOB: W: 20 = (SDVO_CMD_GET_CLOCK_RATE_MULT) > > [ 3.444085] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 > > [ 3.444087] [drm:check_crtc_state], [CRTC:4] > > [ 3.444093] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] > > [ 3.444098] [drm:intel_set_config_compute_mode_changes], computed ch= anges for [CRTC:4], mode_changed=3D0, fb_changed=3D0 > > [ 3.444101] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI= -D-1] to [CRTC:3] > > [ 3.444129] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connector= s=3D1 (x y) (0 0) > > [ 3.444134] [drm:intel_set_config_compute_mode_changes], computed ch= anges for [CRTC:3], mode_changed=3D0, fb_changed=3D0 > > [ 3.444136] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI= -D-1] to [CRTC:3] > > [ 3.446774] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connector= s=3D1 (x y) (0 0) > > [ 3.446779] [drm:intel_set_config_compute_mode_changes], computed ch= anges for [CRTC:3], mode_changed=3D0, fb_changed=3D0 > > [ 3.446782] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI= -D-1] to [CRTC:3] > > [ 3.449753] Console: switching to colour frame buffer device 90x25 > > [ 3.449760] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connector= s=3D1 (x y) (0 0) > > [ 3.449765] [drm:intel_set_config_compute_mode_changes], computed ch= anges for [CRTC:3], mode_changed=3D0, fb_changed=3D0 > > [ 3.449768] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI= -D-1] to [CRTC:3] > > [ 3.455199] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > > [ 3.456384] i915 0000:00:02.0: registered panic notifier > > [ 3.457613] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 o= n minor 0 > > [ 3.459287] parport_pc 00:07: reported by Plug and Play ACPI > > [ 3.460641] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP= ,TRISTATE,COMPAT,ECP,DMA] > > [ 3.560558] lp0: using parport0 (interrupt-driven). > > [ 3.564759] loop: module loaded > > [ 3.566136] ACPI Warning: 0x00004028-0x0000402f SystemIO conflicts w= ith Region \PM2S 1 (20131115/utaddress-251) > > [ 3.568770] ACPI: This conflict may cause random problems and system= instability > > [ 3.570118] ACPI: If an ACPI driver is available for this device, yo= u should use it instead of the native driver > > [ 3.572842] ACPI Warning: 0x000040b0-0x000040bf SystemIO conflicts w= ith Region \GPO2 1 (20131115/utaddress-251) > > [ 3.575761] ACPI: This conflict may cause random problems and system= instability > > [ 3.577297] ACPI: If an ACPI driver is available for this device, yo= u should use it instead of the native driver > > [ 3.580449] ACPI Warning: 0x00004080-0x000040af SystemIO conflicts w= ith Region \GPO_ 1 (20131115/utaddress-251) > > [ 3.583752] ACPI: This conflict may cause random problems and system= instability > > [ 3.585482] ACPI: If an ACPI driver is available for this device, yo= u should use it instead of the native driver > > [ 3.589035] Uniform Multi-Platform E-IDE driver > > [ 3.590849] ide-gd driver 1.18 > > [ 3.592566] ide-cd driver 5.00 > > [ 3.594437] sata_sil24 0000:04:00.0: version 1.1 > > [ 3.595856] scsi0 : sata_sil24 > > [ 3.597881] scsi1 : sata_sil24 > > [ 3.599576] ata1: SATA max UDMA/100 host m128@0xd5184000 port 0xd518= 0000 irq 19 > > [ 3.601314] ata2: SATA max UDMA/100 host m128@0xd5184000 port 0xd518= 2000 irq 19 > > [ 3.603328] ata_piix 0000:00:1f.2: version 2.13 > > [ 3.603623] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] > > [ 3.606198] scsi2 : ata_piix > > [ 3.607871] scsi3 : ata_piix > > [ 3.609448] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000= irq 14 > > [ 3.610913] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008= irq 15 > > [ 3.612450] sky2: driver version 1.30 > > [ 3.614005] sky2 0000:02:00.0: Yukon-2 EC chip revision 1 > > [ 3.615426] sky2 0000:02:00.0: irq 44 for MSI/MSI-X > > [ 3.615990] sky2 0000:02:00.0 eth0: addr 00:01:80:62:25:4b > > [ 3.617863] sky2 0000:03:00.0: Yukon-2 EC chip revision 1 > > [ 3.619183] sky2 0000:03:00.0: irq 45 for MSI/MSI-X > > [ 3.619513] sky2 0000:03:00.0 eth1: addr 00:01:80:62:25:4c > > [ 3.620830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driv= er > > [ 3.622055] ehci-pci: EHCI PCI platform driver > > [ 3.623683] ehci-pci 0000:00:1d.7: EHCI Host Controller > > [ 3.625075] ehci-pci 0000:00:1d.7: new USB bus registered, assigned = bus number 1 > > [ 3.630227] ehci-pci 0000:00:1d.7: cache line size of 32 is not supp= orted > > [ 3.630292] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd5444000 > > [ 3.640021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > > [ 3.641536] usb usb1: New USB device found, idVendor=3D1d6b, idProdu= ct=3D0002 > > [ 3.642578] usb usb1: New USB device strings: Mfr=3D3, Product=3D2, = SerialNumber=3D1 > > [ 3.643620] usb usb1: Product: EHCI Host Controller > > [ 3.644663] usb usb1: Manufacturer: Linux 3.13.0-main-01064-gd978ef1= ehci_hcd > > [ 3.645769] usb usb1: SerialNumber: 0000:00:1d.7 > > [ 3.647888] hub 1-0:1.0: USB hub found > > [ 3.649147] hub 1-0:1.0: 8 ports detected > > [ 3.651481] uhci_hcd: USB Universal Host Controller Interface driver > > [ 3.653001] uhci_hcd 0000:00:1d.0: UHCI Host Controller > > [ 3.654178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned = bus number 2 > > [ 3.655367] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000 > > [ 3.656724] usb usb2: New USB device found, idVendor=3D1d6b, idProdu= ct=3D0001 > > [ 3.657917] usb usb2: New USB device strings: Mfr=3D3, Product=3D2, = SerialNumber=3D1 > > [ 3.659136] usb usb2: Product: UHCI Host Controller > > [ 3.660335] usb usb2: Manufacturer: Linux 3.13.0-main-01064-gd978ef1= uhci_hcd > > [ 3.661564] usb usb2: SerialNumber: 0000:00:1d.0 > > [ 3.663098] hub 2-0:1.0: USB hub found > > [ 3.664378] hub 2-0:1.0: 2 ports detected > > [ 3.666229] uhci_hcd 0000:00:1d.1: UHCI Host Controller > > [ 3.667440] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned = bus number 3 > > [ 3.668729] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 > > [ 3.670060] usb usb3: New USB device found, idVendor=3D1d6b, idProdu= ct=3D0001 > > [ 3.671288] usb usb3: New USB device strings: Mfr=3D3, Product=3D2, = SerialNumber=3D1 > > [ 3.672540] usb usb3: Product: UHCI Host Controller > > [ 3.673782] usb usb3: Manufacturer: Linux 3.13.0-main-01064-gd978ef1= uhci_hcd > > [ 3.675044] usb usb3: SerialNumber: 0000:00:1d.1 > > [ 3.676608] hub 3-0:1.0: USB hub found > > [ 3.677842] hub 3-0:1.0: 2 ports detected > > [ 3.679658] uhci_hcd 0000:00:1d.2: UHCI Host Controller > > [ 3.680864] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned = bus number 4 > > [ 3.682124] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 > > [ 3.683491] usb usb4: New USB device found, idVendor=3D1d6b, idProdu= ct=3D0001 > > [ 3.684736] usb usb4: New USB device strings: Mfr=3D3, Product=3D2, = SerialNumber=3D1 > > [ 3.685978] usb usb4: Product: UHCI Host Controller > > [ 3.687201] usb usb4: Manufacturer: Linux 3.13.0-main-01064-gd978ef1= uhci_hcd > > [ 3.688460] usb usb4: SerialNumber: 0000:00:1d.2 > > [ 3.689990] hub 4-0:1.0: USB hub found > > [ 3.691218] hub 4-0:1.0: 2 ports detected > > [ 3.693001] uhci_hcd 0000:00:1d.3: UHCI Host Controller > > [ 3.694192] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned = bus number 5 > > [ 3.695424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 > > [ 3.696739] usb usb5: New USB device found, idVendor=3D1d6b, idProdu= ct=3D0001 > > [ 3.697965] usb usb5: New USB device strings: Mfr=3D3, Product=3D2, = SerialNumber=3D1 > > [ 3.699207] usb usb5: Product: UHCI Host Controller > > [ 3.700441] usb usb5: Manufacturer: Linux 3.13.0-main-01064-gd978ef1= uhci_hcd > > [ 3.701705] usb usb5: SerialNumber: 0000:00:1d.3 > > [ 3.703233] hub 5-0:1.0: USB hub found > > [ 3.704490] hub 5-0:1.0: 2 ports detected > > [ 3.706034] usbcore: registered new interface driver usblp > > [ 3.707276] usbcore: registered new interface driver usb-storage > > [ 3.708533] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 = irq 1 > > [ 3.709709] i8042: PNP: PS/2 appears to have AUX port disabled, if t= his is incorrect please boot with i8042.nopnp > > [ 3.713047] serio: i8042 KBD port at 0x60,0x64 irq 1 > > [ 3.714994] mousedev: PS/2 mouse device common for all mice > > [ 3.717248] input: PC Speaker as /devices/platform/pcspkr/input/inpu= t3 > > [ 3.718730] rtc_cmos 00:02: RTC can wake from S4 > > [ 3.720549] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > > [ 3.721854] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram,= hpet irqs > > [ 3.723487] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt > > [ 3.724891] w83627hf: w83627hf: Found W83627THF chip at 0x290 > > [ 3.726201] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts w= ith Region \SEN1 1 (20131115/utaddress-251) > > [ 3.729640] ACPI: This conflict may cause random problems and system= instability > > [ 3.731040] ACPI: If an ACPI driver is available for this device, yo= u should use it instead of the native driver > > [ 3.734295] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 > > [ 3.735750] iTCO_wdt: Found a ICH6-M TCO device (Version=3D2, TCOBAS= E=3D0x4060) > > [ 3.737604] iTCO_wdt: initialized. heartbeat=3D30 sec (nowayout=3D0) > > [ 3.739060] device-mapper: uevent: version 1.0.3 > > [ 3.740715] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initiali= sed: dm-devel@redhat.com > > [ 3.743911] input: AT Translated Set 2 keyboard as /devices/platform= /i8042/serio0/input/input2 > > [ 3.747832] hidraw: raw HID events driver (C) Jiri Kosina > > [ 3.750358] usbcore: registered new interface driver usbhid > > [ 3.751951] usbhid: USB HID core driver > > [ 3.753692] TCP: cubic registered > > [ 3.755210] Initializing XFRM netlink socket > > [ 3.757156] Using IPI Shortcut mode > > [ 3.758914] registered taskstats version 1 > > [ 3.760845] AppArmor: AppArmor sha1 policy hashing enabled > > [ 3.763285] rtc_cmos 00:02: setting system clock to 2014-04-22 13:43= :01 UTC (1398174181) > > [ 3.767393] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found > > [ 3.769169] PM: Checking hibernation image partition /dev/sda3 > > [ 3.776285] tsc: Marking TSC unstable due to cpufreq changes > > [ 3.780763] ata4.00: ATAPI: AOpen DVRW2412PRO, 1.64, max UDMA/33 > > [ 3.800255] ata4.00: configured for UDMA/33 > > [ 3.804440] ata3.00: ATA-8: Hitachi HUA722010CLA330, JP4OA3EA, max U= DMA/133 > > [ 3.807721] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth = 0/32) > > [ 3.811214] ata3.01: ATA-7: HDT722525DLA380, V44OA91A, max UDMA/133 > > [ 3.814472] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0= /32) > > [ 3.832368] ata3.00: configured for UDMA/133 > > [ 3.849099] ata3.01: configured for UDMA/133 > > [ 3.960127] usb 1-2: new high-speed USB device number 2 using ehci-p= ci > > [ 4.103316] usb 1-2: New USB device found, idVendor=3D04b8, idProduc= t=3D011b > > [ 4.106371] usb 1-2: New USB device strings: Mfr=3D1, Product=3D2, S= erialNumber=3D0 > > [ 4.109373] usb 1-2: Product: EPSON Scanner > > [ 4.111499] usb 1-2: Manufacturer: EPSON > > [ 4.224106] usb 1-3: new high-speed USB device number 3 using ehci-p= ci > > [ 4.356693] usb 1-3: New USB device found, idVendor=3D1a40, idProduc= t=3D0101 > > [ 4.359538] usb 1-3: New USB device strings: Mfr=3D0, Product=3D1, S= erialNumber=3D0 > > [ 4.362453] usb 1-3: Product: USB 2.0 Hub > > [ 4.366019] hub 1-3:1.0: USB hub found > > [ 4.369046] hub 1-3:1.0: 4 ports detected > > [ 4.868063] usb 5-2: new full-speed USB device number 2 using uhci_h= cd > > [ 5.055696] usb 5-2: New USB device found, idVendor=3D046d, idProduc= t=3Dc52b > > [ 5.058754] usb 5-2: New USB device strings: Mfr=3D1, Product=3D2, S= erialNumber=3D0 > > [ 5.061636] usb 5-2: Product: USB Receiver > > [ 5.064371] usb 5-2: Manufacturer: Logitech > > [ 5.077307] input: Logitech USB Receiver as /devices/pci0000:00/0000= :00:1d.3/usb5/5-2/5-2:1.0/input/input4 > > [ 5.082613] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID = v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0 > > [ 5.092226] input: Logitech USB Receiver as /devices/pci0000:00/0000= :00:1d.3/usb5/5-2/5-2:1.1/input/input5 > > [ 5.096306] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: = USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1 > > [ 5.106935] hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HI= D v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2 > > [ 5.308198] usb 1-3.4: new full-speed USB device number 5 using ehci= -pci > > [ 5.405819] usb 1-3.4: New USB device found, idVendor=3D03f0, idProd= uct=3D1d17 > > [ 5.409341] usb 1-3.4: New USB device strings: Mfr=3D1, Product=3D2,= SerialNumber=3D3 > > [ 5.412910] usb 1-3.4: Product: hp LaserJet 1320 series > > [ 5.416462] usb 1-3.4: Manufacturer: Hewlett-Packard > > [ 5.417994] usb 1-3.4: SerialNumber: 00CNHW646GZH > > [ 5.421067] usblp 1-3.4:1.0: usblp0: USB Bidirectional printer dev 5= if 0 alt 1 proto 2 vid 0x03F0 pid 0x1D17 > > [ 5.800070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) > > [ 5.805665] ata1.00: ATA-8: KINGSTON SKC100S3120G, 501ABBF0, max UDM= A/133 > > [ 5.809390] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 3= 1/32) > > [ 5.815601] ata1.00: configured for UDMA/100 > > [ 5.834084] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC100= S 501A PQ: 0 ANSI: 5 > > [ 5.843662] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (12= 0 GB/111 GiB) > > [ 5.848453] sd 0:0:0:0: Attached scsi generic sg0 type 0 > > [ 5.850657] sd 0:0:0:0: [sda] Write Protect is off > > [ 5.852791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > [ 5.852845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enab= led, doesn't support DPO or FUA > > [ 5.857891] sda: sda1 sda2 sda3 > > [ 5.860857] sd 0:0:0:0: [sda] Attached SCSI disk > > [ 7.932067] ata2: SATA link down (SStatus 0 SControl 0) > > [ 7.948446] scsi 2:0:0:0: Direct-Access ATA Hitachi HUA7220= 1 JP4O PQ: 0 ANSI: 5 > > [ 7.955565] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1= .00 TB/931 GiB) > > [ 7.959313] sd 2:0:0:0: Attached scsi generic sg1 type 0 > > [ 7.962840] sd 2:0:0:0: [sdb] Write Protect is off > > [ 7.966273] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > > [ 7.966355] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enab= led, doesn't support DPO or FUA > > [ 7.969460] scsi 2:0:1:0: Direct-Access ATA HDT722525DLA380= V44O PQ: 0 ANSI: 5 > > [ 7.972841] sd 2:0:1:0: [sdc] 488397168 512-byte logical blocks: (25= 0 GB/232 GiB) > > [ 7.974488] sd 2:0:1:0: [sdc] Write Protect is off > > [ 7.975996] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00 > > [ 7.976292] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enab= led, doesn't support DPO or FUA > > [ 7.979883] sd 2:0:1:0: Attached scsi generic sg2 type 0 > > [ 7.982786] sdb: sdb1 sdb2 sdb3 sdb4 > > [ 7.984492] scsi 3:0:0:0: CD-ROM AOPEN DVRW2412PRO = 1.64 PQ: 0 ANSI: 5 > > [ 7.988948] sd 2:0:0:0: [sdb] Attached SCSI disk > > [ 7.991247] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda= tray > > [ 7.992779] cdrom: Uniform CD-ROM driver Revision: 3.20 > > [ 7.994996] sr 3:0:0:0: Attached scsi CD-ROM sr0 > > [ 7.995175] sr 3:0:0:0: Attached scsi generic sg3 type 5 > > [ 8.058214] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 > > > [ 8.064585] sd 2:0:1:0: [sdc] Attached SCSI disk > > [ 8.067998] PM: Hibernation image partition 8:3 present > > [ 8.068035] PM: Looking for hibernation image. > > [ 8.071701] PM: Image not found (code -22) > > [ 8.071711] PM: Hibernation image not present or could not be loaded= . > > [ 8.072512] Freeing unused kernel memory: 500K (c07f9000 - c0876000) > > [ 8.074558] Write protecting the kernel text: 4488k > > [ 8.076665] Write protecting the kernel read-only data: 2256k > > [ 8.078335] NX-protecting the kernel data: 4728k > > [ 8.196506] systemd-udevd[90]: starting version 208 > > [ 8.817893] random: nonblocking pool is initialized > > [ 9.587815] platform microcode: Direct firmware load failed with err= or -2 > > [ 9.591670] platform microcode: Falling back to user helper > > [ 13.472325] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=3D0 > > [ 13.476038] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0= 050 r(1) > > [ 13.476045] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent = adapter i915 gmbus vga > > [ 13.476049] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, re= try using GPIO bit-banging > > [ 13.476054] [drm:intel_gmbus_force_bit], enabling bit-banging on i91= 5 gmbus vga. force bit now 1 > > [ 13.476395] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent = adapter i915 gmbus vga > > [ 13.476399] [drm:intel_gmbus_force_bit], disabling bit-banging on i9= 15 gmbus vga. force bit now 0 > > [ 13.476403] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x5= 0 [no valid EDID found] > > [ 13.476478] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=3D0 > > [ 14.778136] EXT4-fs (sda1): mounted filesystem with ordered data mod= e. Opts: discard,errors=3Dremount-ro > > [ 14.826261] EXT4-fs (sda1): re-mounted. Opts: discard,errors=3Dremou= nt-ro > > [ 15.029583] systemd[1]: systemd 208 running in system mode. (+PAM +L= IBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) > > [ 15.118801] NET: Registered protocol family 10 > > [ 15.124315] systemd[1]: Inserted module 'ipv6' > > [ 15.126644] systemd[1]: Set hostname to . > > [ 15.183033] LVM: Logical Volume autoactivation enabled. > > [ 15.185303] LVM: Activation generator successfully completed. > > [ 15.311540] systemd[1]: Starting Remote File Systems (Pre). > > [ 15.316221] systemd[1]: Reached target Remote File Systems (Pre). > > [ 15.317953] systemd[1]: Starting Remote File Systems. > > [ 15.321672] systemd[1]: Reached target Remote File Systems. > > [ 15.323419] systemd[1]: Starting Syslog Socket. > > [ 15.327122] systemd[1]: Listening on Syslog Socket. > > [ 15.328820] systemd[1]: Starting /dev/initctl Compatibility Named Pi= pe. > > [ 15.331851] systemd[1]: Listening on /dev/initctl Compatibility Name= d Pipe. > > [ 15.333287] systemd[1]: Starting Delayed Shutdown Socket. > > [ 15.336210] systemd[1]: Listening on Delayed Shutdown Socket. > > [ 15.337533] systemd[1]: Starting LVM2 metadata daemon socket. > > [ 15.340369] systemd[1]: Listening on LVM2 metadata daemon socket. > > [ 15.341702] systemd[1]: Starting Dispatch Password Requests to Conso= le Directory Watch. > > [ 15.343342] systemd[1]: Started Dispatch Password Requests to Consol= e Directory Watch. > > [ 15.344736] systemd[1]: Starting Paths. > > [ 15.347608] systemd[1]: Reached target Paths. > > [ 15.349096] systemd[1]: Starting Arbitrary Executable File Formats F= ile System Automount Point. > > [ 15.354344] systemd[1]: Set up automount Arbitrary Executable File F= ormats File System Automount Point. > > [ 15.357277] systemd[1]: Starting Encrypted Volumes. > > [ 15.360435] systemd[1]: Reached target Encrypted Volumes. > > [ 15.361957] systemd[1]: Starting Journal Socket. > > [ 15.365335] systemd[1]: Listening on Journal Socket. > > [ 15.366865] systemd[1]: Mounting POSIX Message Queue File System... > > [ 15.375572] systemd[1]: Starting Load Kernel Modules... > > [ 15.382417] systemd[1]: Starting Create list of required static devi= ce nodes for the current kernel... > > [ 15.402740] systemd[1]: Started Set Up Additional Binary Formats. > > [ 15.405020] systemd[1]: Starting Setup Virtual Console... > > [ 15.413643] systemd[1]: Starting Create dynamic rule for /dev/root l= ink... > > [ 15.424935] systemd[1]: Starting LSB: Set default boot entry if call= ed... > > [ 15.432288] systemd[1]: Starting Journal Service... > > [ 15.463472] systemd[1]: Started Journal Service. > > [ 15.498137] systemd-journald[202]: Vacuuming done, freed 0 bytes > > [ 15.569620] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connector= s=3D1 (x y) (0 0) > > [ 15.569627] [drm:intel_set_config_compute_mode_changes], computed ch= anges for [CRTC:3], mode_changed=3D0, fb_changed=3D0 > > [ 15.569631] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI= -D-1] to [CRTC:3] > > [ 15.621781] EXT4-fs (sda1): re-mounted. Opts: discard,errors=3Dremou= nt-ro > > [ 15.909733] systemd-udevd[241]: starting version 208 > > [ 16.379683] Linux video capture interface: v2.00 > > [ 16.521180] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HV= R4000(Lite) DVB-S/S2 [card=3D69,autodetected], frontend(s): 1 > > [ 16.542699] WARNING! power/level is deprecated; use power/control in= stead > > [ 16.733638] Adding 7119316k swap on /dev/sda3. Priority:-1 extents:= 1 across:7119316k SS > > [ 17.074286] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X > > [ 17.139216] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: lin= e_outs=3D3 (0x14/0x17/0x16/0x0/0x0) type:line > > [ 17.139224] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs= =3D0 (0x0/0x0/0x0/0x0/0x0) > > [ 17.139229] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=3D1 = (0x19/0x0/0x0/0x0/0x0) > > [ 17.139233] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_o= ut=3D0x0 > > [ 17.139237] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=3D0x= 1e/0x0 > > [ 17.139240] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: > > [ 17.139244] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic= =3D0x18 > > [ 17.139248] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic= =3D0x1b > > [ 17.139252] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=3D0x1= a > > [ 17.139257] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid= SSID, checking pincfg 0x411111f0 for NID 0x1d > > [ 17.139261] ALSA sound/pci/hda/patch_realtek.c:572 realtek: Enable d= efault setup for auto mode as fallback > > [ 17.162783] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00= :1b.0/input/input6 > > [ 17.222696] input: HDA Intel Line Out CLFE as /devices/pci0000:00/00= 00:00:1b.0/sound/card0/input12 > > [ 17.236290] input: HDA Intel Line Out Surround as /devices/pci0000:0= 0/0000:00:1b.0/sound/card0/input11 > > [ 17.255391] input: HDA Intel Line Out Front as /devices/pci0000:00/0= 000:00:1b.0/sound/card0/input10 > > [ 17.261287] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.= 0/sound/card0/input9 > > [ 17.274087] tveeprom 8-0050: Hauppauge model 69100, rev B4C3, serial= # 7900937 > > [ 17.292122] input: HDA Intel Front Mic as /devices/pci0000:00/0000:0= 0:1b.0/sound/card0/input8 > > [ 17.303670] tveeprom 8-0050: MAC address is 00:0d:fe:78:8f:09 > > [ 17.315320] tveeprom 8-0050: tuner model is Conexant CX24118A (idx 1= 23, type 4) > > [ 17.321311] tveeprom 8-0050: TV standards ATSC/DVB Digital (eeprom 0= x80) > > [ 17.329373] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00= :1b.0/sound/card0/input7 > > [ 17.335654] tveeprom 8-0050: audio processor is None (idx 0) > > [ 17.347089] tveeprom 8-0050: decoder processor is CX880 (idx 20) > > [ 17.357408] tveeprom 8-0050: has no radio, has IR receiver, has no I= R transmitter > > [ 17.367460] cx88[0]: hauppauge eeprom: model=3D69100 > > [ 17.416091] Registered IR keymap rc-hauppauge > > [ 17.418847] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci00= 00:00/0000:00:1e.0/0000:05:05.2/rc/rc0/input13 > > [ 17.431663] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000= :00/0000:00:1e.0/0000:05:05.2/rc/rc0 > > [ 17.449327] IR RC5(x) protocol handler initialized > > [ 17.454480] cx88[0]/2: cx2388x 8802 Driver Manager > > [ 17.457159] cx88[0]/2: found at 0000:05:05.2, rev: 5, irq: 17, laten= cy: 32, mmio: 0xd2000000 > > [ 17.461726] lirc_dev: IR Remote Control driver registered, major 250= =20 > > [ 17.466631] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) register= ed at minor =3D 0 > > [ 17.472116] IR LIRC bridge handler initialized > > [ 17.482251] cx88[0]/0: found at 0000:05:05.0, rev: 5, irq: 17, laten= cy: 32, mmio: 0xd0000000 > > [ 17.487398] cx88[0]/0: registered device video0 [v4l2] > > [ 17.497932] cx88[0]/0: registered device vbi0 > > [ 17.509908] cx88/2: cx2388x dvb driver version 0.0.9 loaded > > [ 17.511501] cx88/2: registering cx8802 driver, type: dvb access: sha= red > > [ 17.514289] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-= HVR4000(Lite) DVB-S/S2 [card=3D69] > > [ 17.521114] cx88[0]/2: cx2388x based DVB/ATSC card > > [ 17.524146] cx8802_alloc_frontends() allocating 1 frontend(s) > > [ 17.552650] DVB: registering new adapter (cx88[0]) > > [ 17.554415] cx88-mpeg driver manager 0000:05:05.2: DVB: registering = adapter 0 frontend 0 (Conexant CX24116/CX24118)... > > [ 17.767120] REISERFS (device sdb4): found reiserfs format "3.6" with= standard journal > > [ 17.769248] REISERFS (device sdb4): using ordered data mode > > [ 17.770792] reiserfs: using flush barriers > > [ 17.782609] REISERFS (device sdb4): journal params: device sdb4, siz= e 8192, journal first block 18, max trans len 1024, max batch 900, max comm= it age 30, max trans age 30 > > [ 17.787278] REISERFS (device sdb4): checking transaction log (sdb4) > > [ 17.892494] REISERFS (device sdb4): Using r5 hash to sort names > > [ 17.917237] usblp0: removed > > [ 18.063161] EXT4-fs (sda2): mounted filesystem with ordered data mod= e. Opts: discard,errors=3Dremount-ro > > [ 18.112358] systemd-journald[202]: Received request to flush runtime= journal from PID 1 > > [ 18.898204] ip6_tables: (C) 2000-2006 Netfilter Core Team > > [ 19.019782] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > > [ 19.048657] ip_tables: (C) 2000-2006 Netfilter Core Team > > [ 21.004540] sky2 0000:02:00.0 eth0: enabling interface > > [ 21.004816] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > > [ 21.171576] NET: Registered protocol family 17 > > [ 22.799130] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full dup= lex, flow control both > > [ 22.799313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > [ 23.488060] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=3D0 > > [ 23.492456] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0= 050 r(1) > > [ 23.492470] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent = adapter i915 gmbus vga > > [ 23.492479] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, re= try using GPIO bit-banging > > [ 23.492489] [drm:intel_gmbus_force_bit], enabling bit-banging on i91= 5 gmbus vga. force bit now 1 > > [ 23.492967] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent = adapter i915 gmbus vga > > [ 23.492978] [drm:intel_gmbus_force_bit], disabling bit-banging on i9= 15 gmbus vga. force bit now 0 > > [ 23.492986] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x5= 0 [no valid EDID found] > > [ 23.493001] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=3D0 >=20 --=-yExGmFwI3mdTEDmwRk8A Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part Content-Transfer-Encoding: 7bit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) iQEcBAABAgAGBQJTVpdQAAoJEORIIAnNuWDFhSYIAIFBvpr/rdzpqncQs7UgxJmO z5IBhf7bGac87a6CCrKtGXdgRhpJGE/yr42JFSf610f+OcV4j/XTX1qLMxfexLfA ge620rly6yq506ck0gSVhcKhiqM70XHSnZ4dC8oo6qNC6dGtNQ1ka3AK5lYtsuoq 2//32CocrlB4GNMzob32Ew7lzYCTJw3LxhoLgwe+mHXrQNP0ugZ5+ZSxQOlVIm9N vI+Y5O0Te+ZFAvM4mnm97GoUycn3pQh55wuH6EbxleZZ5pGgSQ5nED0hfq/619NL 6enXMxbPt8GXNZSoxkDAw5UHFr2ZJ+ab9S3jOrp0ui0fyDftUYYud8nwmuvQeAo= =ZjUW -----END PGP SIGNATURE----- --=-yExGmFwI3mdTEDmwRk8A-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/