Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755956AbaDVTlK (ORCPT ); Tue, 22 Apr 2014 15:41:10 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:51923 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752580AbaDVTlI (ORCPT ); Tue, 22 Apr 2014 15:41:08 -0400 From: Joel Fernandes To: Linux OMAP List , Linux ARM Kernel List , Linux Kernel Mailing List CC: Joel Fernandes , Santosh Shilimkar , Russell King , Nishanth Menon , Tony Lindgren Subject: [PATCH v2] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU Date: Tue, 22 Apr 2014 14:40:39 -0500 Message-ID: <1398195639-29273-1-git-send-email-joelf@ti.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On my DRA7 system, when the kernel is built in Thumb-2 mode, the secondary CPU (Cortex A15) fails to come up causing SMP boot on second CPU to timeout. This seems to be because the CPU is in ARM mode once the ROM hands over control to the kernel. Switch to Thumb-2 mode if required once the kernel is control of secondary CPU. On OMAP4 on the other hand, it appears to be in Thumb-2 mode on entry so this is not required and SMP boot works as is. Also corrected a spurious '+' and updated copyright information. Cc: Santosh Shilimkar Cc: Russell King Cc: Nishanth Menon Cc: Tony Lindgren Tested-by: Nishanth Menon Acked-by: Santosh Shilimkar Signed-off-by: Joel Fernandes --- arch/arm/mach-omap2/omap-headsmp.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 75e9295..40c5d5f 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -1,7 +1,7 @@ /* * Secondary CPU startup routine source file. * - * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009-2014 Texas Instruments, Inc. * * Author: * Santosh Shilimkar @@ -28,9 +28,13 @@ * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. * The primary core will update this flag using a hardware -+ * register AuxCoreBoot0. + * register AuxCoreBoot0. */ ENTRY(omap5_secondary_startup) +.arm +THUMB( adr r9, BSYM(wait) ) @ CPU may be entered in ARM mode. +THUMB( bx r9 ) @ If this is a Thumb-2 kernel, +THUMB( .thumb ) @ switch to Thumb now. wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 ldr r0, [r2] mov r0, r0, lsr #5 -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/