Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751634AbaDWWKI (ORCPT ); Wed, 23 Apr 2014 18:10:08 -0400 Received: from atrey.karlin.mff.cuni.cz ([195.113.26.193]:53565 "EHLO atrey.karlin.mff.cuni.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751365AbaDWWJ4 (ORCPT ); Wed, 23 Apr 2014 18:09:56 -0400 Date: Thu, 24 Apr 2014 00:09:52 +0200 From: Pavel Machek To: Daniel Vetter Cc: "Nikula, Jani" , intel-gfx , dri-devel , "Rafael J. Wysocki" , kernel list Subject: Re: 3.15-rc2: i915 regression: only top 20% of screen works in X Message-ID: <20140423220952.GA3627@amd.pavel.ucw.cz> References: <20140423202248.GA3621@amd.pavel.ucw.cz> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi! > > After update to 3.15-rc2, only top 20% of screen works on X. > > > > 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset > > Integrated Graphics Controller (rev 03) > > > > 00:02.1 Display controller: Intel Corporation 4 Series Chipset > > Integrated Graphics Controller (rev 03) > > Subsystem: Intel Corporation Device d614 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast > > >TAbort- SERR- > Latency: 0 > > Region 0: Memory at d0400000 (64-bit, non-prefetchable) > > [size=1M] > > Capabilities: > > > > This worked before. I believe it worked in 3.14. It definitely works > > in 3.11-rc2. > > Screenshot or more detailed description of what "only top 20% of > screen works in X" means? > Anything in dmesg? Actually yes, dmesg suggests it is quite sick. drivers/gpu/drm/drm_mm.c:767 warning triggered repeatedly. Also.. initial framebuffer does not work ; I don't seem to see anything before X start up. (This is Debian 6.0.9) Best regards, Pavel Initializing cgroup subsys cpu Linux version 3.15.0-rc1+ (pavel@amd) (gcc version 4.4.5 (Debian 4.4.5-8) ) #335 SMP Sat Apr 19 17:58:01 CEST 2014 e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bd87dfff] usable BIOS-e820: [mem 0x00000000bd87e000-0x00000000bd900fff] ACPI NVS BIOS-e820: [mem 0x00000000bd901000-0x00000000bda42fff] reserved BIOS-e820: [mem 0x00000000bda43000-0x00000000bda56fff] ACPI NVS BIOS-e820: [mem 0x00000000bda57000-0x00000000bdb54fff] reserved BIOS-e820: [mem 0x00000000bdb55000-0x00000000bdb5dfff] ACPI data BIOS-e820: [mem 0x00000000bdb5e000-0x00000000bdb67fff] ACPI NVS BIOS-e820: [mem 0x00000000bdb68000-0x00000000bdb88fff] reserved BIOS-e820: [mem 0x00000000bdb89000-0x00000000bdb8efff] ACPI NVS BIOS-e820: [mem 0x00000000bdb8f000-0x00000000bdcfffff] usable BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.4 present. DMI: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0xbdd00 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 100000000 mask FC0000000 write-back 2 base 0BDD00000 mask FFFF00000 write-through 3 base 0BDE00000 mask FFFE00000 uncachable 4 base 0BE000000 mask FFE000000 uncachable 5 base 0C0000000 mask FC0000000 uncachable 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped: [mem 0x00000000-0x053fffff] Base memory trampoline at [c009a000] 9a000 size 16384 init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] [mem 0x37000000-0x373fffff] page 4k BRK [0x05109000, 0x05109fff] PGTABLE init_memory_mapping: [mem 0x30000000-0x36ffffff] [mem 0x30000000-0x36ffffff] page 4k BRK [0x0510a000, 0x0510afff] PGTABLE BRK [0x0510b000, 0x0510bfff] PGTABLE BRK [0x0510c000, 0x0510cfff] PGTABLE BRK [0x0510d000, 0x0510dfff] PGTABLE BRK [0x0510e000, 0x0510efff] PGTABLE init_memory_mapping: [mem 0x00100000-0x2fffffff] [mem 0x00100000-0x2fffffff] page 4k init_memory_mapping: [mem 0x37400000-0x377fdfff] [mem 0x37400000-0x377fdfff] page 4k ACPI: RSDP 0x000F03C0 000024 (v02 INTEL ) ACPI: XSDT 0xBDB5CE18 000044 (v01 INTEL DG41MJ 00000006 MSFT 00010013) ACPI: FACP 0xBDB5BD98 0000F4 (v04 INTEL DG41RQ 00000006 MSFT 00010013) ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xBDB5FF40/0x00000000BDB64F40, using 64-bit address (20140214/tbfadt-271) ACPI: DSDT 0xBDB55018 005983 (v01 INTEL DG41MJ 00000006 INTL 20051117) ACPI: FACS 0xBDB64F40 000040 ACPI: APIC 0xBDB5BF18 00006C (v02 INTEL DG41MJ 00000006 MSFT 00010013) ACPI: MCFG 0xBDB66E18 00003C (v01 INTEL DG41MJ 00000006 MSFT 00000097) ACPI: HPET 0xBDB66D98 000038 (v01 INTEL DG41MJ 00000006 AMI. 00000003) ACPI: Local APIC address 0xfee00000 2149MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone ranges: DMA [mem 0x00001000-0x00ffffff] Normal [mem 0x01000000-0x377fdfff] HighMem [mem 0x377fe000-0xbdcfffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009dfff] node 0: [mem 0x00100000-0xbd87dfff] node 0: [mem 0xbdb8f000-0xbdcfffff] On node 0 totalpages: 776588 free_area_init_node: node 0, pgdat c4b566c0, node_mem_map f5885024 DMA zone: 36 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3997 pages, LIFO batch:0 Normal zone: 1962 pages used for memmap Normal zone: 223230 pages, LIFO batch:31 HighMem zone: 4836 pages used for memmap HighMem zone: 549361 pages, LIFO batch:31 Using APIC driver default Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @f7794000 s29312 r0 d23936 u53248 pcpu-alloc: s29312 r0 d23936 u53248 alloc=13*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774590 Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux-good/arch/x86/boot/bzImage root=/dev/sda3 resume=/dev/sda1 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 xsave: enabled xstate_bv 0x3, cntxt size 0x240 Initializing HighMem for node 0 (000377fe:000bdd00) Initializing Movable for node 0 (00000000:00000000) Memory: 3059460K/3106352K available (8171K kernel code, 529K rwdata, 3012K rodata, 488K init, 5108K bss, 46892K reserved, 2197444K highmem) virtual kernel memory layout: fixmap : 0xffe6f000 - 0xfffff000 (1600 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc4b74000 - 0xc4bee000 ( 488 kB) .data : 0xc47fb245 - 0xc4b72400 (3548 kB) .text : 0xc4000000 - 0xc47fb245 (8172 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS:2304 nr_irqs:712 16 CPU 0 irqstacks, hard=f541a000 soft=f541c000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3551 kB per task-struct memory footprint: 1152 bytes ODEBUG: 11 of 11 active objects replaced hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 2799.691 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.38 BogoMIPS (lpj=11198764) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20140214 ACPI: All ACPI Tables successfully acquired Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 tlb_flushall_shift: -1 debug: unmapping init [mem 0xc4bee000-0xc4bf5fff] Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (fam: 06, model: 17, stepping: 0a) Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 CPU 1 irqstacks, hard=f55b8000 soft=f55ba000 x86: Booting SMP configuration: .... node #0, CPUs: #1 Initializing CPU#1 x86: Booted up 1 node, 2 CPUs smpboot: Total of 2 processors activated (11198.76 BogoMIPS) NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xbd87e000-0xbd900fff] (536576 bytes) PM: Registering ACPI NVS region [mem 0xbda43000-0xbda56fff] (81920 bytes) PM: Registering ACPI NVS region [mem 0xbdb5e000-0xbdb67fff] (40960 bytes) PM: Registering ACPI NVS region [mem 0xbdb89000-0xbdb8efff] (24576 bytes) NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 0xBDB5FC18 0002CC (v01 AMI IST 00000001 MSFT 03000001) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000 0002CC (v01 AMI IST 00000001 MSFT 03000001) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: \_PR_.CPU3: failed to get CPU APIC ID. ACPI: \_PR_.CPU4: failed to get CPU APIC ID. ACPI: \_PR_.CPU5: failed to get CPU APIC ID. ACPI: \_PR_.CPU6: failed to get CPU APIC ID. ACPI: \_PR_.CPU7: failed to get CPU APIC ID. ACPI: \_PR_.CPU8: failed to get CPU APIC ID. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: System wakeup disabled by ACPI pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf140-0xf147] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000 pci 0000:00:02.1: reg 0x10: [mem 0xd0400000-0xd04fffff 64bit] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0xd0600000-0xd0603fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: System wakeup disabled by ACPI pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: System wakeup disabled by ACPI pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f] pci 0000:00:1d.0: System wakeup disabled by ACPI pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:1d.1: System wakeup disabled by ACPI pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:1d.2: System wakeup disabled by ACPI pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f] pci 0000:00:1d.3: System wakeup disabled by ACPI pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 0x10: [mem 0xd0604000-0xd06043ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: System wakeup disabled by ACPI pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 pci 0000:00:1e.0: System wakeup disabled by ACPI pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 pci 0000:00:1f.0: can't claim BAR 7 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb] pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7] pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3] pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7] pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3] pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff] pci 0000:03:00.0: reg 0x18: [mem 0xd0514000-0xd0514fff 64bit pref] pci 0000:03:00.0: reg 0x20: [mem 0xd0510000-0xd0513fff 64bit pref] pci 0000:03:00.0: reg 0x30: [mem 0xd0500000-0xd050ffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: Enabled 2 GPEs in block 00 to 1F vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] e820: reserve RAM buffer [mem 0xbd87e000-0xbfffffff] e820: reserve RAM buffer [mem 0xbdd00000-0xbfffffff] Bluetooth: Core ver 2.19 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at net/wireless/reg.c:479 regulatory_init+0x88/0xf5() db.txt is empty, you should update it... Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc1+ #335 Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 000001df f5517e44 c47f4b0f c4a9e750 f5517e74 c403872a c4aa85f8 f5517ea0 00000001 c4a9e750 000001df c4baa8df c4baa8df 00000000 c4baa780 f5517ec8 f5517e8c c40387ce 00000009 f5517e84 c4aa85f8 f5517ea0 f5517ecc c4baa8df Call Trace: [] dump_stack+0x41/0x52 [] warn_slowpath_common+0x7a/0xa0 [] ? regulatory_init+0x88/0xf5 [] ? regulatory_init+0x88/0xf5 [] ? cache_initialize+0x86/0x86 [] warn_slowpath_fmt+0x2e/0x30 [] regulatory_init+0x88/0xf5 [] cfg80211_init+0x5f/0xd7 [] ? bt_init+0x6e/0x98 [] do_one_initcall+0xca/0x180 [] ? __wake_up+0x1b/0x50 [] ? repair_env_string+0x15/0x5b [] ? parse_args+0x1f1/0x440 [] kernel_init_freeable+0xec/0x191 [] ? kernel_init_freeable+0x191/0x191 [] kernel_init+0xb/0xe0 [] ret_from_kernel_thread+0x21/0x30 [] ? rest_init+0xb0/0xb0 ---[ end trace 5ca1be6641aaee8c ]--- cfg80211: Calling CRDA to update world regulatory domain Switched to clocksource hpet pnp: PnP ACPI init ACPI: bus type PNP registered system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved system 00:00: [mem 0xe0000000-0xefffffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:01: [io 0x0800-0x087f] could not be reserved system 00:01: [io 0x0480-0x04bf] has been reserved system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:01: [mem 0xff000000-0xffffffff] could not be reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [dma 0 disabled] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:04: [dma 3] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:05: [dma 4] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 11 devices ACPI: bus type PNP unregistered pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0700000-0xd08fffff] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0900000-0xd0afffff 64bit pref] pci 0000:00:1c.1: BAR 9: assigned [mem 0xd0b00000-0xd0cfffff 64bit pref] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd08fffff] pci 0000:00:1c.0: bridge window [mem 0xd0900000-0xd0afffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] pci 0000:00:1c.1: bridge window [mem 0xd0b00000-0xd0cfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd08fffff] pci_bus 0000:02: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xd0500000-0xd05fffff] pci_bus 0000:03: resource 2 [mem 0xd0b00000-0xd0cfffff 64bit pref] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xffffffff] NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 futex hash table entries: 1024 (order: 4, 65536 bytes) bounce pool size: 64 pages ntfs: driver 2.1.30 [Flags: R/W]. fuse init (API version 7.23) msgmni has been set to 1683 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed usbcore: registered new interface driver udlfb intel_idle: does not run on family 6 model 23 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] GHES: HEST is not enabled! Error: Driver 'battery' is already registered, aborting... ERST DBG: ERST support is disabled. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A lp: driver loaded but no devices found Non-volatile memory driver v1.3 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel G41 Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 32768K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [drm] Initialized drm 1.1.0 20060810 [drm] Memory usable by graphics device = 2048M [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00002034 tail 00000000 start 0012f000 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mm.c:767 drm_mm_takedown+0x2c/0x30() Memory manager not clean during takedown. Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.15.0-rc1+ #335 Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 000002ff f5517c00 c47f4b0f c4a27b17 f5517c30 c403872a c4a51954 f5517c5c 00000001 c4a27b17 000002ff c435126c c435126c f40a8000 f4fd3800 fffffffb f5517c48 c40387ce 00000009 f5517c40 c4a51954 f5517c5c f5517c5c c435126c Call Trace: [] dump_stack+0x41/0x52 [] warn_slowpath_common+0x7a/0xa0 [] ? drm_mm_takedown+0x2c/0x30 [] ? drm_mm_takedown+0x2c/0x30 [] warn_slowpath_fmt+0x2e/0x30 [] drm_mm_takedown+0x2c/0x30 [] i915_gem_init+0x71/0x190 [] i915_driver_load+0xa59/0xe00 [] ? i915_switcheroo_set_state+0xa0/0xa0 [] ? __lock_acquire+0x3ae/0xc80 [] ? _raw_spin_unlock+0x1d/0x20 [] ? drm_minor_register+0x152/0x1c0 [] drm_dev_register+0xa6/0xf0 [] drm_get_pci_dev+0x71/0x1d0 [] i915_pci_probe+0x35/0x50 [] local_pci_probe+0x33/0x80 [] ? pci_match_device+0xb2/0xc0 [] pci_device_probe+0x60/0x80 [] driver_probe_device+0x7f/0x360 [] ? pci_match_device+0xb2/0xc0 [] __driver_attach+0x81/0x90 [] bus_for_each_dev+0x68/0x90 [] driver_attach+0x19/0x20 [] ? driver_probe_device+0x360/0x360 [] bus_add_driver+0x167/0x200 [] driver_register+0x54/0xe0 [] ? drm_core_init+0x107/0x107 [] __pci_register_driver+0x45/0x50 [] drm_pci_init+0xe2/0x110 [] ? drm_core_init+0xdb/0x107 [] ? drm_core_init+0x107/0x107 [] i915_init+0x62/0x64 [] do_one_initcall+0xca/0x180 [] ? __wake_up+0x1b/0x50 [] ? repair_env_string+0x15/0x5b [] ? parse_args+0x1f1/0x440 [] kernel_init_freeable+0xec/0x191 [] ? kernel_init_freeable+0x191/0x191 [] kernel_init+0xb/0xe0 [] ret_from_kernel_thread+0x21/0x30 [] ? rest_init+0xb0/0xb0 ---[ end trace 5ca1be6641aaee8d ]--- ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/i915/intel_pm.c:5637 intel_display_power_put+0xfe/0x130() Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.15.0-rc1+ #335 Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 00001605 f5517c10 c47f4b0f c4a52694 f5517c40 c403872a c49eeaf8 00000001 00000001 c4a52694 00001605 c4368b6e c4368b6e 00000999 00000015 f40a8000 f5517c50 c403876d 00000009 00000000 f5517c7c c4368b6e c4a51954 f5517c7c Call Trace: [] dump_stack+0x41/0x52 [] warn_slowpath_common+0x7a/0xa0 [] ? intel_display_power_put+0xfe/0x130 [] ? intel_display_power_put+0xfe/0x130 [] warn_slowpath_null+0x1d/0x20 [] intel_display_power_put+0xfe/0x130 [] ? i915_gem_init+0x71/0x190 [] i915_driver_load+0xb25/0xe00 [] ? i915_switcheroo_set_state+0xa0/0xa0 [] ? __lock_acquire+0x3ae/0xc80 [] ? _raw_spin_unlock+0x1d/0x20 [] ? drm_minor_register+0x152/0x1c0 [] drm_dev_register+0xa6/0xf0 [] drm_get_pci_dev+0x71/0x1d0 [] i915_pci_probe+0x35/0x50 [] local_pci_probe+0x33/0x80 [] ? pci_match_device+0xb2/0xc0 [] pci_device_probe+0x60/0x80 [] driver_probe_device+0x7f/0x360 [] ? pci_match_device+0xb2/0xc0 [] __driver_attach+0x81/0x90 [] bus_for_each_dev+0x68/0x90 [] driver_attach+0x19/0x20 [] ? driver_probe_device+0x360/0x360 [] bus_add_driver+0x167/0x200 [] driver_register+0x54/0xe0 [] ? drm_core_init+0x107/0x107 [] __pci_register_driver+0x45/0x50 [] drm_pci_init+0xe2/0x110 [] ? drm_core_init+0xdb/0x107 [] ? drm_core_init+0x107/0x107 [] i915_init+0x62/0x64 [] do_one_initcall+0xca/0x180 [] ? __wake_up+0x1b/0x50 [] ? repair_env_string+0x15/0x5b [] ? parse_args+0x1f1/0x440 [] kernel_init_freeable+0xec/0x191 [] ? kernel_init_freeable+0x191/0x191 [] kernel_init+0xb/0xe0 [] ret_from_kernel_thread+0x21/0x30 [] ? rest_init+0xb0/0xb0 ---[ end trace 5ca1be6641aaee8e ]--- ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mm.c:767 drm_mm_takedown+0x2c/0x30() Memory manager not clean during takedown. Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.15.0-rc1+ #335 Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 000002ff f5517c14 c47f4b0f c4a27b17 f5517c44 c403872a c4a51954 f5517c70 00000001 c4a27b17 000002ff c435126c c435126c f40a8000 fffffffb f40a8000 f5517c5c c40387ce 00000009 f5517c54 c4a51954 f5517c70 f5517c70 c435126c Call Trace: [] dump_stack+0x41/0x52 [] warn_slowpath_common+0x7a/0xa0 [] ? drm_mm_takedown+0x2c/0x30 [] ? drm_mm_takedown+0x2c/0x30 [] warn_slowpath_fmt+0x2e/0x30 [] drm_mm_takedown+0x2c/0x30 [] i915_gem_cleanup_stolen+0x21/0x30 [] i915_driver_load+0xb33/0xe00 [] ? i915_switcheroo_set_state+0xa0/0xa0 [] ? __lock_acquire+0x3ae/0xc80 [] ? _raw_spin_unlock+0x1d/0x20 [] ? drm_minor_register+0x152/0x1c0 [] drm_dev_register+0xa6/0xf0 [] drm_get_pci_dev+0x71/0x1d0 [] i915_pci_probe+0x35/0x50 [] local_pci_probe+0x33/0x80 [] ? pci_match_device+0xb2/0xc0 [] pci_device_probe+0x60/0x80 [] driver_probe_device+0x7f/0x360 [] ? pci_match_device+0xb2/0xc0 [] __driver_attach+0x81/0x90 [] bus_for_each_dev+0x68/0x90 [] driver_attach+0x19/0x20 [] ? driver_probe_device+0x360/0x360 [] bus_add_driver+0x167/0x200 [] driver_register+0x54/0xe0 [] ? drm_core_init+0x107/0x107 [] __pci_register_driver+0x45/0x50 [] drm_pci_init+0xe2/0x110 [] ? drm_core_init+0xdb/0x107 [] ? drm_core_init+0x107/0x107 [] i915_init+0x62/0x64 [] do_one_initcall+0xca/0x180 [] ? __wake_up+0x1b/0x50 [] ? repair_env_string+0x15/0x5b [] ? parse_args+0x1f1/0x440 [] kernel_init_freeable+0xec/0x191 [] ? kernel_init_freeable+0x191/0x191 [] kernel_init+0xb/0xe0 [] ret_from_kernel_thread+0x21/0x30 [] ? rest_init+0xb0/0xb0 ---[ end trace 5ca1be6641aaee8f ]--- [drm:i915_driver_load] *ERROR* failed to init modeset ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mm.c:767 drm_mm_takedown+0x2c/0x30() Memory manager not clean during takedown. Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.15.0-rc1+ #335 Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 000002ff f5517c20 c47f4b0f c4a27b17 f5517c50 c403872a c4a51954 f5517c7c 00000001 c4a27b17 000002ff c435126c c435126c f4fd3800 fffffffb f40aa018 f5517c68 c40387ce 00000009 f5517c60 c4a51954 f5517c7c f5517c7c c435126c Call Trace: [] dump_stack+0x41/0x52 [] warn_slowpath_common+0x7a/0xa0 [] ? drm_mm_takedown+0x2c/0x30 [] ? drm_mm_takedown+0x2c/0x30 [] warn_slowpath_fmt+0x2e/0x30 [] drm_mm_takedown+0x2c/0x30 [] i915_driver_load+0x42d/0xe00 [] ? __lock_acquire+0x3ae/0xc80 [] ? _raw_spin_unlock+0x1d/0x20 [] ? drm_minor_register+0x152/0x1c0 [] drm_dev_register+0xa6/0xf0 [] drm_get_pci_dev+0x71/0x1d0 [] i915_pci_probe+0x35/0x50 [] local_pci_probe+0x33/0x80 [] ? pci_match_device+0xb2/0xc0 [] pci_device_probe+0x60/0x80 [] driver_probe_device+0x7f/0x360 [] ? pci_match_device+0xb2/0xc0 [] __driver_attach+0x81/0x90 [] bus_for_each_dev+0x68/0x90 [] driver_attach+0x19/0x20 [] ? driver_probe_device+0x360/0x360 [] bus_add_driver+0x167/0x200 [] driver_register+0x54/0xe0 [] ? drm_core_init+0x107/0x107 [] __pci_register_driver+0x45/0x50 [] drm_pci_init+0xe2/0x110 [] ? drm_core_init+0xdb/0x107 [] ? drm_core_init+0x107/0x107 [] i915_init+0x62/0x64 [] do_one_initcall+0xca/0x180 [] ? __wake_up+0x1b/0x50 [] ? repair_env_string+0x15/0x5b [] ? parse_args+0x1f1/0x440 [] kernel_init_freeable+0xec/0x191 [] ? kernel_init_freeable+0x191/0x191 [] kernel_init+0xb/0xe0 [] ret_from_kernel_thread+0x21/0x30 [] ? rest_init+0xb0/0xb0 ---[ end trace 5ca1be6641aaee90 ]--- kmem_cache_destroy i915_gem_object: Slab cache still has objects CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.15.0-rc1+ #335 Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 f57b2a40 f5517c64 c47f4b0f f57b2a00 f5517c7c c40d03ec c49f6910 f479b3e0 f4fd3800 fffffffb f5517d6c c43d2a0d c4855752 c4a2dc53 00000001 c50d8de0 c4a2dc2a 0000015c f817c15b 00000002 f82b615c 00005f02 00000003 00000000 Call Trace: [] dump_stack+0x41/0x52 [] kmem_cache_destroy+0x9c/0xc0 [] i915_driver_load+0x46d/0xe00 [] ? __lock_acquire+0x3ae/0xc80 [] ? _raw_spin_unlock+0x1d/0x20 [] ? drm_minor_register+0x152/0x1c0 [] drm_dev_register+0xa6/0xf0 [] drm_get_pci_dev+0x71/0x1d0 [] i915_pci_probe+0x35/0x50 [] local_pci_probe+0x33/0x80 [] ? pci_match_device+0xb2/0xc0 [] pci_device_probe+0x60/0x80 [] driver_probe_device+0x7f/0x360 [] ? pci_match_device+0xb2/0xc0 [] __driver_attach+0x81/0x90 [] bus_for_each_dev+0x68/0x90 [] driver_attach+0x19/0x20 [] ? driver_probe_device+0x360/0x360 [] bus_add_driver+0x167/0x200 [] driver_register+0x54/0xe0 [] ? drm_core_init+0x107/0x107 [] __pci_register_driver+0x45/0x50 [] drm_pci_init+0xe2/0x110 [] ? drm_core_init+0xdb/0x107 [] ? drm_core_init+0x107/0x107 [] i915_init+0x62/0x64 [] do_one_initcall+0xca/0x180 [] ? __wake_up+0x1b/0x50 [] ? repair_env_string+0x15/0x5b [] ? parse_args+0x1f1/0x440 [] kernel_init_freeable+0xec/0x191 [] ? kernel_init_freeable+0x191/0x191 [] kernel_init+0xb/0xe0 [] ret_from_kernel_thread+0x21/0x30 [] ? rest_init+0xb0/0xb0 i915: probe of 0000:00:02.0 failed with error -5 parport_pc 00:04: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). loop: module loaded nbd: registered device at major 43 ata_piix 0000:00:1f.1: version 2.13 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata2: port disabled--ignoring scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2014 Intel Corporation. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xf8024000, 00:27:0e:2a:43:71, XID 081000c0 IRQ 17 r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds iwl3945: Copyright(c) 2003-2011 Intel Corporation usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver cdc_ncm ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1d.7: debug port 1 ehci-pci 0000:00:1d.7: cache line size of 64 is not supported ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0604000 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.15.0-rc1+ ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.15.0-rc1+ uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.15.0-rc1+ uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.15.0-rc1+ uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.15.0-rc1+ uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp usbcore: registered new interface driver usb-storage usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 usbcore: registered new interface driver ti_usb_3410_5052 usbserial: USB Serial support registered for TI USB 3410 1 port adapter usbserial: USB Serial support registered for TI USB 5052 2 port adapter driver ftdi-elan usbcore: registered new interface driver ftdi-elan i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input3 rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized usbcore: registered new interface driver btusb lguest: mapped switcher at ffe65000 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver snd-usb-audio nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered NET: Registered protocol family 17 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized Using IPI No-Shortcut mode rtc_cmos 00:06: setting system clock to 2014-04-23 22:03:58 UTC (1398290638) PM: Checking hibernation image partition /dev/sda1 sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) sound hdaudioC0D2: mono: mono_out=0x0 sound hdaudioC0D2: inputs: sound hdaudioC0D2: Front Mic=0x19 sound hdaudioC0D2: Rear Mic=0x18 sound hdaudioC0D2: Line=0x1a input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 ata3.01: NODEV after polling detection ata3.00: ATAPI: HL-DT-ST DVDRAM GT20N, CQ02, max UDMA/133 ata3.00: configured for UDMA/133 scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N CQ02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg0 type 5 ata4.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133 ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sda] 4096-byte physical blocks sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: Attached scsi generic sg1 type 0 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 3:0:0:0: [sda] Attached SCSI disk PM: Hibernation image partition 8:1 present PM: Looking for hibernation image. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. ALSA device list: #0: HDA Intel at 0xd0600000 irq 16 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:3. devtmpfs: mounted debug: unmapping init [mem 0xc4b74000-0xc4bedfff] Write protecting the kernel text: 8176k Write protecting the kernel read-only data: 3016k usb 1-4: new high-speed USB device number 3 using ehci-pci usb 1-4: New USB device found, idVendor=058f, idProduct=6362 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: Mass Storage Device usb 1-4: Manufacturer: Generic usb 1-4: SerialNumber: 058F312D81B usb-storage 1-4:1.0: USB Mass Storage device detected scsi4 : usb-storage 1-4:1.0 tsc: Refined TSC clocksource calibration: 2799.955 MHz udev[1664]: starting version 164 usb 2-1: new low-speed USB device number 2 using uhci_hcd usb 2-1: New USB device found, idVendor=0458, idProduct=002e usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: NetScroll+ Traveler usb 2-1: Manufacturer: KYE input: KYE NetScroll+ Traveler as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:0458:002E.0001/input/input9 hid-generic 0003:0458:002E.0001: input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:1d.0-1/input0 usb 4-2: new low-speed USB device number 2 using uhci_hcd scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 4:0:0:1: Attached scsi generic sg3 type 0 sd 4:0:0:0: [sdb] Attached SCSI removable disk scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 4:0:0:2: Attached scsi generic sg4 type 0 sd 4:0:0:1: [sdc] Attached SCSI removable disk scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 4:0:0:3: Attached scsi generic sg5 type 0 sd 4:0:0:3: [sde] Attached SCSI removable disk sd 4:0:0:2: [sdd] Attached SCSI removable disk usb 4-2: New USB device found, idVendor=04f2, idProduct=0111 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: USB Keyboard usb 4-2: Manufacturer: Chicony input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:04F2:0111.0002/input/input10 hid-generic 0003:04F2:0111.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.2-2/input0 Switched to clocksource tsc input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:04F2:0111.0003/input/input11 hid-generic 0003:04F2:0111.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.2-2/input1 random: nonblocking pool is initialized Adding 2097148k swap on /dev/sda1. Priority:-1 extents:1 across:2097148k EXT3-fs (sda3): using internal journal EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro EXT3-fs (sda4): error: can't find ext3 filesystem on dev sda4. input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 r8169 0000:03:00.0: Direct firmware load failed with error -2 r8169 0000:03:00.0: Falling back to user helper r8169 0000:03:00.0 eth1: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-12) r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link up sshd (3421): /proc/3421/oom_adj is deprecated, please use /proc/3421/oom_score_adj instead. -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/