From: Anton Tikhomirov <av.tikhomirov@samsung.com>
To: "'Vivek Gautam'" <gautam.vivek@samsung.com>, linux-usb@vger.kernel.org,
        linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, gregkh@linuxfoundation.org,
        stern@rowland.harvard.edu, balbi@ti.com, kgene.kim@samsung.com,
        "'Jingoo Han'" <jg1.han@samsung.com>
References: <1398082604-3013-1-git-send-email-gautam.vivek@samsung.com>
In-reply-to: <1398082604-3013-1-git-send-email-gautam.vivek@samsung.com>
Subject: RE: [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators
Date: Thu, 24 Apr 2014 09:18:02 +0900
Message-id: <002b01cf5f52$a7bc0d70$f7342850$%tikhomirov@samsung.com>
MIME-version: 1.0
Content-type: text/plain; charset=ks_c_5601-1987
Content-transfer-encoding: 7bit
Thread-index: Ac9dW7xThSfjkrSrQe+CdXtZr3k56gB9L0nA
Content-language: en-us
DLP-Filter: Pass
Sender: linux-kernel-owner@vger.kernel.org

Hi,

> -----Original Message-----
> From: linux-usb-owner@vger.kernel.org [mailto:linux-usb-
> owner@vger.kernel.org] On Behalf Of Vivek Gautam
> Sent: Monday, April 21, 2014 9:17 PM
> 
> Facilitate getting required 3.3V and 1.0V VDD supply for
> OHCI controller on Exynos.
> 
> With patches for regulators' nodes merged in 3.15:
> c8c253f ARM: dts: Add regulator entries to smdk5420
> 275dcd2 ARM: dts: add max77686 pmic node for smdk5250,
> 
> certain perripherals will now need to ensure that,
> they request VDD regulators in their drivers, and enable
> them so as to make them working.
> 
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> Cc: Jingoo Han <jg1.han@samsung.com>
> ---
> 
> Based on 'usb-next' branch of Greg's usb tree.
> 
>  drivers/usb/host/ohci-exynos.c |   47
> ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-
> exynos.c
> index 68588d8..e2e72a8 100644
> --- a/drivers/usb/host/ohci-exynos.c
> +++ b/drivers/usb/host/ohci-exynos.c
> @@ -18,6 +18,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/usb/phy.h>
>  #include <linux/usb/samsung_usb_phy.h>
>  #include <linux/usb.h>
> @@ -37,6 +38,8 @@ struct exynos_ohci_hcd {
>  	struct clk *clk;
>  	struct usb_phy *phy;
>  	struct usb_otg *otg;
> +	struct regulator *vdd33;
> +	struct regulator *vdd10;
>  };
> 
>  static void exynos_ohci_phy_enable(struct platform_device *pdev)
> @@ -98,6 +101,28 @@ static int exynos_ohci_probe(struct platform_device
> *pdev)
>  		exynos_ohci->otg = phy->otg;
>  	}
> 
> +	exynos_ohci->vdd33 = devm_regulator_get(&pdev->dev, "vdd33");
> +	if (IS_ERR(exynos_ohci->vdd33)) {
> +		err = PTR_ERR(exynos_ohci->vdd33);
> +		goto fail_regulator1;
> +	}
> +	err = regulator_enable(exynos_ohci->vdd33);
> +	if (err) {
> +		dev_err(&pdev->dev, "Failed to enable VDD33 supply\n");
> +		goto fail_regulator1;
> +	}
> +
> +	exynos_ohci->vdd10 = devm_regulator_get(&pdev->dev, "vdd10");
> +	if (IS_ERR(exynos_ohci->vdd10)) {
> +		err = PTR_ERR(exynos_ohci->vdd10);
> +		goto fail_regulator2;
> +	}
> +	err = regulator_enable(exynos_ohci->vdd10);
> +	if (err) {
> +		dev_err(&pdev->dev, "Failed to enable VDD10 supply\n");
> +		goto fail_regulator2;
> +	}
> +

Do we need to skip regulator settings together with PHY configuration
in case of exynos5440?

>  skip_phy:
>  	exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
> 
> @@ -154,6 +179,10 @@ fail_add_hcd:
>  fail_io:
>  	clk_disable_unprepare(exynos_ohci->clk);
>  fail_clk:
> +	regulator_disable(exynos_ohci->vdd10);
> +fail_regulator2:
> +	regulator_disable(exynos_ohci->vdd33);
> +fail_regulator1:
>  	usb_put_hcd(hcd);
>  	return err;
>  }
> @@ -172,6 +201,9 @@ static int exynos_ohci_remove(struct
> platform_device *pdev)
> 
>  	clk_disable_unprepare(exynos_ohci->clk);
> 
> +	regulator_disable(exynos_ohci->vdd10);
> +	regulator_disable(exynos_ohci->vdd33);
> +
>  	usb_put_hcd(hcd);
> 
>  	return 0;
> @@ -208,6 +240,9 @@ static int exynos_ohci_suspend(struct device *dev)
> 
>  	clk_disable_unprepare(exynos_ohci->clk);
> 
> +	regulator_disable(exynos_ohci->vdd10);
> +	regulator_disable(exynos_ohci->vdd33);
> +
>  	spin_unlock_irqrestore(&ohci->lock, flags);
> 
>  	return 0;
> @@ -218,6 +253,18 @@ static int exynos_ohci_resume(struct device *dev)
>  	struct usb_hcd *hcd			= dev_get_drvdata(dev);
>  	struct exynos_ohci_hcd *exynos_ohci	= to_exynos_ohci(hcd);
>  	struct platform_device *pdev		= to_platform_device(dev);
> +	int ret;
> +
> +	ret = regulator_enable(exynos_ohci->vdd33);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable VDD33 supply\n");
> +		return ret;

Not sure, but shall we continue resuming and do everything
we can in case of error? At least it will avoid
WARN_ON(clk->enable_count == 0) on next system suspend.

> +	}
> +	ret = regulator_enable(exynos_ohci->vdd10);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable VDD10 supply\n");
> +		return ret;
> +	}
> 
>  	clk_prepare_enable(exynos_ohci->clk);
> 
> --

Thanks

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/