Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753944AbaDYNvz (ORCPT ); Fri, 25 Apr 2014 09:51:55 -0400 Received: from mail.active-venture.com ([67.228.131.205]:55279 "EHLO mail.active-venture.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751784AbaDYNvv (ORCPT ); Fri, 25 Apr 2014 09:51:51 -0400 X-Originating-IP: 108.223.40.66 Message-ID: <535A6873.9020404@roeck-us.net> Date: Fri, 25 Apr 2014 06:51:47 -0700 From: Guenter Roeck User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0 MIME-Version: 1.0 To: monstr@monstr.eu CC: linux-kernel@vger.kernel.org Subject: Re: Microblaze image hanging in qemu with 3.15-rc References: <20140422172356.GA15672@roeck-us.net> <53575074.6010602@monstr.eu> <5357C246.7050604@roeck-us.net> <5357CA6B.1070101@monstr.eu> <20140423154533.GA15644@roeck-us.net> <5358AC50.7020308@monstr.eu> <535913E1.70509@roeck-us.net> <535A0DD7.4080204@monstr.eu> <535A631F.5020208@roeck-us.net> In-Reply-To: <535A631F.5020208@roeck-us.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 04/25/2014 06:29 AM, Guenter Roeck wrote: > On 04/25/2014 12:25 AM, Michal Simek wrote: > [ ... ] > >> >> It should be pretty easy to fix it in timer_write function like this. >> >> diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c >> index 6113b97..3ff1da9 100644 >> --- a/hw/timer/xilinx_timer.c >> +++ b/hw/timer/xilinx_timer.c >> @@ -169,7 +169,7 @@ timer_write(void *opaque, hwaddr addr, >> if (value & TCSR_TINT) >> value &= ~TCSR_TINT; >> >> - xt->regs[addr] = value; >> + xt->regs[addr] = value & 0x7ff; >> if (value & TCSR_ENT) >> timer_enable(xt); >> break; >> > > Hi Michal, > > that fixes endianness detection, but the image is still hanging. > > Here is the log: > > NR_IRQS:33 > /plb@0/interrupt-controller@81800000: num_irq=4, edge=0xa > ERROR: CPU CCF input clock not found > Reading TCSR0 returned 0x0, expected 0x1 > Switch to big endian mode > /plb@0/timer@83c00000: irq=1 > ERROR: timer CCF input clock not found > ERROR: Using CPU clock frequency > xilinx_timer_set_mode: shutdown > xilinx_timer_set_mode: periodic > sched_clock: 32 bits at 62MHz, resolution 16ns, wraps every 68719476720ns > Calibrating delay loop... QEMU: Terminated > > I added a couple of log messages to make sure that the mode is detected correctly. > Any idea what else might be wrong ? > Never mind, I found it. Same problem with interrupt handler. Can you give me the valid bit mask for intc_baseaddr + MER ? Thanks, Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/