Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752782AbaD0Bau (ORCPT ); Sat, 26 Apr 2014 21:30:50 -0400 Received: from smtprelay05.ispgateway.de ([80.67.31.98]:60738 "EHLO smtprelay05.ispgateway.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752736AbaD0BaD (ORCPT ); Sat, 26 Apr 2014 21:30:03 -0400 From: Peter Feuerer To: LKML Cc: Peter Feuerer , Zhang Rui , Andreas Mohr , Borislav Petkov Subject: [PATCH 4/4] acerhdf: Use bang-bang thermal governor Date: Sun, 27 Apr 2014 03:23:35 +0200 Message-Id: <1398561815-22033-5-git-send-email-peter@piie.net> X-Mailer: git-send-email 1.9.2 In-Reply-To: <1398561815-22033-1-git-send-email-peter@piie.net> References: <1398561815-22033-1-git-send-email-peter@piie.net> X-Df-Sender: cGV0ZXJAcGlpZS5uZXQ= Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Peter Feuerer acerhdf has been doing an on-off fan control using hysteresis by post-manipulating the outcome of thermal subsystem trip point handling. This patch enables acerhdf to use the bang-bang governor, which is intended for on-off controlled fans. CC: Zhang Rui Cc: Andreas Mohr Cc: Borislav Petkov Signed-off-by: Peter Feuerer --- drivers/platform/x86/Kconfig | 2 +- drivers/platform/x86/acerhdf.c | 45 ++++++++++++++++++++++++++++++++++-------- 2 files changed, 38 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 27df2c5..bbc5dd2 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -38,7 +38,7 @@ config ACER_WMI config ACERHDF tristate "Acer Aspire One temperature and fan driver" - depends on THERMAL && ACPI + depends on THERMAL && ACPI && THERMAL_GOV_BANG_BANG ---help--- This is a driver for Acer Aspire One netbooks. It allows to access the temperature sensor and to control the fan. diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 8b6466b..acba516 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -50,7 +50,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.30" +#define DRV_VER "0.5.31" /* * According to the Atom N270 datasheet, @@ -130,8 +130,8 @@ struct bios_settings_t { const char *vendor; const char *product; const char *version; - unsigned char fanreg; - unsigned char tempreg; + u8 fanreg; + u8 tempreg; struct fancmd cmd; struct manualcmd mcmd; }; @@ -253,6 +253,14 @@ static const struct bios_settings_t bios_tbl[] = { static const struct bios_settings_t *bios_cfg __read_mostly; +/* used to force thermal to use bang_bang governor for acerhdf */ +static struct thermal_zone_params acerhdf_zone_params = { + .governor_name = "bang_bang", + .no_hwmon = 0, + .num_tbps = 0, + .tbp = 0, +}; + static int acerhdf_get_temp(int *temp) { u8 read_temp; @@ -430,6 +438,17 @@ static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip, { if (trip == 0) *type = THERMAL_TRIP_ACTIVE; + if (trip == 1) + *type = THERMAL_TRIP_CRITICAL; + + return 0; +} + +static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip, + unsigned long *temp) +{ + if (trip == 0) + *temp = fanon - fanoff; return 0; } @@ -439,6 +458,8 @@ static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip, { if (trip == 0) *temp = fanon; + else if (trip == 1) + *temp = ACERHDF_TEMP_CRIT; return 0; } @@ -458,8 +479,10 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = { .get_mode = acerhdf_get_mode, .set_mode = acerhdf_set_mode, .get_trip_type = acerhdf_get_trip_type, + .get_trip_hyst = acerhdf_get_trip_hyst, .get_trip_temp = acerhdf_get_trip_temp, .get_crit_temp = acerhdf_get_crit_temp, + .notify = NULL, }; @@ -510,9 +533,7 @@ static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev, } if (state == 0) { - /* turn fan off only if below fanoff temperature */ - if ((cur_state == ACERHDF_FAN_AUTO) && - (cur_temp < fanoff)) + if (cur_state == ACERHDF_FAN_AUTO) acerhdf_change_fanstate(ACERHDF_FAN_OFF); } else { if (cur_state == ACERHDF_FAN_OFF) @@ -690,12 +711,20 @@ static int acerhdf_register_thermal(void) if (IS_ERR(cl_dev)) return -EINVAL; - thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL, - &acerhdf_dev_ops, NULL, 0, + thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL, + &acerhdf_dev_ops, + &acerhdf_zone_params, 0, (kernelmode) ? interval*1000 : 0); if (IS_ERR(thz_dev)) return -EINVAL; + if (strcmp(thz_dev->governor->name, + acerhdf_zone_params.governor_name)) { + pr_err("Thermal governor %s is not compiled into thermal subsystem\n", + acerhdf_zone_params.governor_name); + return -EINVAL; + } + return 0; } -- 1.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/