Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752843AbaD0Bb0 (ORCPT ); Sat, 26 Apr 2014 21:31:26 -0400 Received: from smtprelay02.ispgateway.de ([80.67.29.24]:58914 "EHLO smtprelay02.ispgateway.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752606AbaD0BaD (ORCPT ); Sat, 26 Apr 2014 21:30:03 -0400 X-Greylist: delayed 366 seconds by postgrey-1.27 at vger.kernel.org; Sat, 26 Apr 2014 21:30:03 EDT From: Peter Feuerer To: LKML Cc: Peter Feuerer , Zhang Rui , Andreas Mohr , Borislav Petkov Subject: [PATCH 3/4] thermal: Added Bang-bang thermal governor Date: Sun, 27 Apr 2014 03:23:34 +0200 Message-Id: <1398561815-22033-4-git-send-email-peter@piie.net> X-Mailer: git-send-email 1.9.2 In-Reply-To: <1398561815-22033-1-git-send-email-peter@piie.net> References: <1398561815-22033-1-git-send-email-peter@piie.net> X-Df-Sender: cGV0ZXJAcGlpZS5uZXQ= Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Peter Feuerer The bang-bang thermal governor uses a hysteresis to switch abruptly on or off a cooling device. It is intended to control fans, which can not be throttled but just switched on or off. Bang-bang cannot be set as default governor as it is intended for special devices only. For those special devices the driver needs to explicitely request it. Cc: Zhang Rui Cc: Andreas Mohr Cc: Borislav Petkov Signed-off-by: Peter Feuerer --- drivers/thermal/Kconfig | 10 ++++ drivers/thermal/Makefile | 1 + drivers/thermal/gov_bang_bang.c | 124 ++++++++++++++++++++++++++++++++++++++++ drivers/thermal/thermal_core.c | 5 ++ drivers/thermal/thermal_core.h | 8 +++ 5 files changed, 148 insertions(+) create mode 100644 drivers/thermal/gov_bang_bang.c diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 2d51912..2ede94f 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -84,6 +84,16 @@ config THERMAL_GOV_STEP_WISE Enable this to manage platform thermals using a simple linear governor. +config THERMAL_GOV_BANG_BANG + bool "Bang Bang thermal governor" + default y + help + Enable this to manage platform thermals using bang bang governor. + + Say 'Y' here if you want to use two point temperature regulation + used for fans without throttling. Some fan drivers depend on this + governor to be enabled (e.g. acerhdf). + config THERMAL_GOV_USER_SPACE bool "User_space thermal governor" help diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 54e4ec9..1c32a5d 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -11,6 +11,7 @@ thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o # governors thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o +thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c new file mode 100644 index 0000000..96f314d --- /dev/null +++ b/drivers/thermal/gov_bang_bang.c @@ -0,0 +1,124 @@ +/* + * gov_bang_bang.c - A simple thermal throttling governor using hysteresis + * + * Copyright (C) 2014 Peter Feuerer + * + * Based on step_wise.c with following Copyrights: + * Copyright (C) 2012 Intel Corp + * Copyright (C) 2012 Durgadoss R + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + */ + +#include + +#include "thermal_core.h" + +static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) +{ + long trip_temp; + unsigned long trip_hyst; + struct thermal_instance *instance; + + tz->ops->get_trip_temp(tz, trip, &trip_temp); + tz->ops->get_trip_hyst(tz, trip, &trip_hyst); + + dev_dbg(&tz->device, "Trip%d[temp=%ld]:temp=%d:hyst=%ld\n", + trip, trip_temp, tz->temperature, + trip_hyst); + + mutex_lock(&tz->lock); + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip) + continue; + + /* in case fan is neither on nor off set the fan to active */ + if (instance->target != 0 && instance->target != 1) + instance->target = 1; + + /* + * enable fan when temperature exceeds trip_temp and disable + * the fan in case it falls below trip_temp minus hysteresis + */ + if (instance->target == 0 && tz->temperature >= trip_temp) + instance->target = 1; + else if (instance->target == 1 && + tz->temperature < trip_temp - trip_hyst) + instance->target = 0; + + dev_dbg(&instance->cdev->device, "target=%d\n", + (int)instance->target); + + instance->cdev->updated = false; /* cdev needs update */ + } + + mutex_unlock(&tz->lock); +} + +/** + * bang_bang_throttle - throttles devices asscciated with the given zone + * @tz - thermal_zone_device + * @trip - the trip point + * + * Throttling Logic: a two point regulation, deliver cooling state depending + * on the previous state shown in this diagram: + * + * Fan: OFF ON + * + * | + * | + * trip_temp: +---->+ + * | | ^ + * | | | + * | | Temperature + * (trip_temp - hyst): +<----+ + * | + * | + * | + * + * * If the fan is not running and temperature exceeds trip_temp, the fan + * gets turned on. + * * In case the fan is running, temperature must fall below + * (trip_temp - hyst) so that the fan gets turned off again. + * + */ +static int bang_bang_throttle(struct thermal_zone_device *tz, int trip) +{ + struct thermal_instance *instance; + + thermal_zone_trip_update(tz, trip); + + mutex_lock(&tz->lock); + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) + thermal_cdev_update(instance->cdev); + + mutex_unlock(&tz->lock); + + return 0; +} + +static struct thermal_governor thermal_gov_bang_bang = { + .name = "bang_bang", + .throttle = bang_bang_throttle, +}; + +int thermal_gov_bang_bang_register(void) +{ + return thermal_register_governor(&thermal_gov_bang_bang); +} + +void thermal_gov_bang_bang_unregister(void) +{ + thermal_unregister_governor(&thermal_gov_bang_bang); +} diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 71b0ec0..4c2726b 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1790,6 +1790,10 @@ static int __init thermal_register_governors(void) if (result) return result; + result = thermal_gov_bang_bang_register(); + if (result) + return result; + return thermal_gov_user_space_register(); } @@ -1797,6 +1801,7 @@ static void thermal_unregister_governors(void) { thermal_gov_step_wise_unregister(); thermal_gov_fair_share_unregister(); + thermal_gov_bang_bang_unregister(); thermal_gov_user_space_unregister(); } diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 3db339f..d15d243 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -69,6 +69,14 @@ static inline int thermal_gov_fair_share_register(void) { return 0; } static inline void thermal_gov_fair_share_unregister(void) {} #endif /* CONFIG_THERMAL_GOV_FAIR_SHARE */ +#ifdef CONFIG_THERMAL_GOV_BANG_BANG +int thermal_gov_bang_bang_register(void); +void thermal_gov_bang_bang_unregister(void); +#else +static inline int thermal_gov_bang_bang_register(void) { return 0; } +static inline void thermal_gov_bang_bang_unregister(void) {} +#endif /* CONFIG_THERMAL_GOV_BANG_BANG */ + #ifdef CONFIG_THERMAL_GOV_USER_SPACE int thermal_gov_user_space_register(void); void thermal_gov_user_space_unregister(void); -- 1.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/