Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932526AbaD1Ng2 (ORCPT ); Mon, 28 Apr 2014 09:36:28 -0400 Received: from ns.mm-sol.com ([37.157.136.199]:58341 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756049AbaD1NfX (ORCPT ); Mon, 28 Apr 2014 09:35:23 -0400 From: "Ivan T. Ivanov" To: Felipe Balbi Cc: Tim Bird , Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Tim Bird Subject: [PATCH v8 16/20] usb: phy: msm: Fix PTS definitions for MSM USB controller Date: Mon, 28 Apr 2014 16:34:19 +0300 Message-Id: <1398692063-11372-17-git-send-email-iivanov@mm-sol.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1398692063-11372-1-git-send-email-iivanov@mm-sol.com> References: <1398692063-11372-1-git-send-email-iivanov@mm-sol.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Tim Bird Fix the value used for Parallel Transceiver Select (PTS) for the MSM USB controller. This is a standard chipidea PORTSC definition, where a PHY_TYPE of 10b (<<30) is ULPI and 11b (<<30) is SERIAL. Fix the definitions and use them correctly in the driver code. Signed-off-by: Tim Bird --- drivers/usb/phy/phy-msm-usb.c | 8 +++++--- include/linux/usb/msm_hsusb_hw.h | 5 +++-- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index bb33996..db8d963 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -287,8 +287,9 @@ static int msm_link_reset(struct msm_otg *motg) if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); + /* put transceiver in serial mode as part of reset */ val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; - writel(val | PORTSC_PTS_ULPI, USB_PORTSC); + writel(val | PORTSC_PTS_SERIAL, USB_PORTSC); return 0; } @@ -308,8 +309,9 @@ static int msm_otg_reset(struct usb_phy *phy) if (cnt >= LINK_RESET_TIMEOUT_USEC) return -ETIMEDOUT; - /* select ULPI phy */ - writel(0x80000000, USB_PORTSC); + /* select ULPI phy and clear other status/control bits in PORTSC */ + writel(PORTSC_PTS_ULPI, USB_PORTSC); + writel(0x0, USB_AHBBURST); writel(0x08, USB_AHBMODE); diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index 575c743..98d3dd8 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -31,8 +31,9 @@ #define USB_USBINTR (MSM_USB_BASE + 0x0148) #define PORTSC_PHCD (1 << 23) /* phy suspend mode */ -#define PORTSC_PTS_MASK (3 << 30) -#define PORTSC_PTS_ULPI (3 << 30) +#define PORTSC_PTS_MASK (3 << 30) +#define PORTSC_PTS_ULPI (2 << 30) +#define PORTSC_PTS_SERIAL (3 << 30) #define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170) #define ULPI_RUN (1 << 30) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/