Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757005AbaD1VTh (ORCPT ); Mon, 28 Apr 2014 17:19:37 -0400 Received: from mail-ob0-f179.google.com ([209.85.214.179]:50819 "EHLO mail-ob0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756161AbaD1VTd (ORCPT ); Mon, 28 Apr 2014 17:19:33 -0400 MIME-Version: 1.0 In-Reply-To: <20140419135219.GC8109@pd.tnic> References: <20140419025308.2408.51252.stgit@amt.stowe> <20140419025323.2408.88764.stgit@amt.stowe> <20140419135219.GC8109@pd.tnic> Date: Mon, 28 Apr 2014 15:19:32 -0600 Message-ID: Subject: Re: [PATCH v2 2/5] x86/PCI: Support additional MMIO range capabilities From: Myron Stowe To: Borislav Petkov Cc: Myron Stowe , Bjorn Helgaas , linux-pci , Suravee Suthikulpanit , Aravind Gopalakrishnan , kim.naru@amd.com, daniel@numascale.com, Thomas Gleixner , mingo@redhat.com, hpa@zytor.com, x86 , Borislav Petkov , sp@numascale.com, "linux-acpi@vger.kernel.org" , LKML Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sat, Apr 19, 2014 at 7:52 AM, Borislav Petkov wrote: > On Fri, Apr 18, 2014 at 08:53:23PM -0600, Myron Stowe wrote: >> From: Suravee Suthikulpanit >> >> This patch adds supports for additional MMIO ranges (16 ranges). Also, >> each MMIO base/limit can now support up to 48-bit MMIO addresses. >> However, this requires initializing the ECS sooner since the new registers >> are in the ECS ranges. >> >> This applies for AMD Family 15h and later. >> >> Reference: Advanced Micro Devices (AMD), "BIOS and Kernel Developer's >> Guide (BKDG) for AMD Family 15h Models 00h-0fh Processors." Section 3.4 >> Device [1F:18]h Function 1 Configuration Registers; >> D18F1x[1CC:180,BC:80] MMIO Base/Limit, >> D18F1x[D8,D0,C8,C0] IO-Space Base, >> D18F1x[DC,D4,CC,C4] IO-Space Limit, >> 42301 Rev 3.12 - October 11, 2012. >> >> Signed-off-by: Suravee Suthikulpanit >> Signed-off-by: Myron Stowe >> Tested-by: Aravind Gopalakrishnan >> --- >> >> arch/x86/pci/amd_bus.c | 126 +++++++++++++++++++++++++++++++++++++++--------- >> 1 files changed, 103 insertions(+), 23 deletions(-) >> >> diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c >> index c8cd75c..1b2895e 100644 >> --- a/arch/x86/pci/amd_bus.c >> +++ b/arch/x86/pci/amd_bus.c >> @@ -13,11 +13,30 @@ >> >> #define AMD_NB_F0_NODE_ID 0x60 >> #define AMD_NB_F0_UNIT_ID 0x64 >> +#define AMD_NB_F1_MMIO_BASE_REG 0x80 >> +#define AMD_NB_F1_MMIO_LIMIT_REG 0x84 >> +#define AMD_NB_F1_MMIO_BASE_LIMIT_HI_REG 0x180 >> +#define AMD_NB_F1_IO_BASE_ADDR_REG 0xc0 >> +#define AMD_NB_F1_IO_LIMIT_ADDR_REG 0xc4 >> #define AMD_NB_F1_CONFIG_MAP_REG 0xe0 >> >> #define RANGE_NUM 16 >> +#define AMD_NB_F1_MMIO_RANGES 16 >> +#define AMD_NB_F1_IOPORT_RANGES 4 >> #define AMD_NB_F1_CONFIG_MAP_RANGES 4 >> >> +#define AMD_PCIE_CF8(bus, dev, fn, reg) \ >> + (0x80000000 | \ >> + ((reg & 0xF00) << 16) | \ >> + ((bus & 0xF) << 16) | \ >> + ((dev & 0x1F) << 11) | \ >> + ((fn & 0x7) << 8) | \ >> + ((reg & 0xFC))) >> + >> +static bool amd_early_ecs_enabled; >> + >> +static int __init pci_io_ecs_init(u8 bus, u8 slot); > > Please move the function above its caller instead of adding a forward > declaration. > Patch 3/5 cleans this up >> + >> /* >> * This discovers the pcibus <-> node mapping on AMD K8, Family 10h, 12h, >> * 14h, 15h, and 16h processor based systems. This also gets peer root bus >> @@ -39,6 +58,20 @@ static struct amd_hostbridge hb_probes[] __initdata = { >> { 0xff, 0 , PCI_DEVICE_ID_AMD_10H_NB_HT }, >> }; >> >> +/* This version of read_pci_config allows reading registers in the ECS area */ >> +static inline int _amd_read_pci_config(u8 bus, u8 slot, u8 fn, u32 offset) >> +{ >> + u32 value; >> + >> + if ((!amd_early_ecs_enabled) && (offset > 0xFF)) >> + return -1; >> + >> + outl(AMD_PCIE_CF8(bus, slot, fn, offset), 0xcf8); >> + value = inl(0xcfc); >> + >> + return value; >> + >> static struct pci_root_info __init *find_pci_root_info(int node, int link) >> { >> struct pci_root_info *info; >> @@ -48,6 +81,9 @@ static struct pci_root_info __init *find_pci_root_info(int node, int link) >> if (info->node == node && info->link == link) >> return info; >> >> + pr_warn("AMD-Bus: WARNING: Failed to find root info for node %#x, link %#x\n", > > Prefixes like "AMD-Bus" are done using pr_fmt. > Ok, I incorporated pr_fmt changes into patch 3/5 >> + node, link); >> + >> return NULL; >> } >> >> @@ -118,6 +154,12 @@ static int __init early_fill_mp_bus_info(void) >> >> pr_debug("Found AMD hostbridge at %x:%x.0\n", bus, slot); >> >> + /* We enable ECS mode prior to probing MMIO as MMIO related registers >> + * are in the ECS area. >> + */ >> + pci_io_ecs_init(bus, slot); > > Well, if enabling the ECS failed somehow, you probably want to save > yourself the _amd_read_pci_config() calls further down. > > Which means: > > * you should propagate an error code from that pci_io_ecs_init() function > > * you can carve out the huge loop iterating over AMD_NB_F1_MMIO_RANGES > along with the pci ECS enablement call to pci_io_ecs_init into a > separate function and thus slim down that huge early_fill_mp_bus_info() > monster a bit. > Yes but this was not trivial since most, if not all, usages ignore any return value. I'm wanting to focus on just fixing the issue for the most part and making as few changes as possible. This is primarly due to: o The lack of engagement by the AMD engineers (Suravee posted these changes but has since been unresponsive), o As Bjorn just mentioned, we would like to get rid of this entire file (as we did in a similar manner with intel_bus) as it is just an "endless treadmill" that needs attention with every new HW release, o I want my name to be minimally related to this ;) >> + >> + found = false; >> for (i = 0; i < AMD_NB_F1_CONFIG_MAP_RANGES; i++) { >> int min_bus; >> int max_bus; >> @@ -128,6 +170,7 @@ static int __init early_fill_mp_bus_info(void) >> if ((reg & 7) != 3) >> continue; >> >> + found = true; >> min_bus = (reg >> 16) & 0xff; >> max_bus = (reg >> 24) & 0xff; >> node = (reg >> 4) & 0x07; >> @@ -136,6 +179,13 @@ static int __init early_fill_mp_bus_info(void) >> info = alloc_pci_root_info(min_bus, max_bus, node, link); >> } >> >> + if (!found) { >> + /* In case there is no AMDNB_F1_CONFIG_MAP_REGs, >> + * we just use default to bus 0, node 0 link 0) >> + */ >> + info = alloc_pci_root_info(0, 0, 0, 0); >> + } > > No need for curly braces around a single statement - simply put the > comment before the if (...). > Done >> + >> /* get the default node and link for left over res */ >> reg = read_pci_config(bus, slot, 0, AMD_NB_F0_NODE_ID); >> def_node = (reg >> 8) & 0x07; >> @@ -144,14 +194,17 @@ static int __init early_fill_mp_bus_info(void) >> >> memset(range, 0, sizeof(range)); >> add_range(range, RANGE_NUM, 0, 0, 0xffff + 1); >> + >> /* io port resource */ >> - for (i = 0; i < 4; i++) { >> - reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); >> + for (i = 0; i < AMD_NB_F1_IOPORT_RANGES; i++) { >> + reg = read_pci_config(bus, slot, 1, >> + AMD_NB_F1_IO_BASE_ADDR_REG + (i << 3)); >> if (!(reg & 3)) >> continue; >> >> start = reg & 0xfff000; >> - reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3)); >> + reg = read_pci_config(bus, slot, 1, >> + AMD_NB_F1_IO_LIMIT_ADDR_REG + (i << 3)); >> node = reg & 0x07; >> link = (reg >> 4) & 0x03; >> end = (reg & 0xfff000) | 0xfff; >> @@ -169,6 +222,7 @@ static int __init early_fill_mp_bus_info(void) >> update_res(info, start, end, IORESOURCE_IO, 1); >> subtract_range(range, RANGE_NUM, start, end + 1); >> } >> + >> /* add left over io port range to def node/link, [0, 0xffff] */ >> /* find the position */ >> info = find_pci_root_info(def_node, def_link); >> @@ -211,22 +265,46 @@ static int __init early_fill_mp_bus_info(void) >> } >> >> /* mmio resource */ >> - for (i = 0; i < 8; i++) { >> - reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); >> + for (i = 0; i < AMD_NB_F1_MMIO_RANGES; i++) { >> + u64 tmp; >> + u32 base = AMD_NB_F1_MMIO_BASE_REG + (i << 3); >> + u32 limit = AMD_NB_F1_MMIO_LIMIT_REG + (i << 3); >> + u32 base_limit_hi = AMD_NB_F1_MMIO_BASE_LIMIT_HI_REG + (i << 2); >> + >> + if (i >= 12) { >> + /* Range 12 base/limit starts at 0x2A0 */ >> + base += 0x1c0; >> + limit += 0x1c0; >> + /* Range 12 base/limit hi starts at 0x2C0 */ >> + base_limit_hi += 0x110; >> + } else if (i >= 8) { >> + /* Range 8 base/limit starts at 0x1A0 */ >> + base += 0xe0; >> + limit += 0xe0; >> + /* Range 12 base/limit hi starts at 0x1C0 */ >> + base_limit_hi += 0x20; >> + } >> + >> + /* Base lo */ >> + reg = _amd_read_pci_config(bus, slot, 1, base); >> if (!(reg & 3)) >> continue; >> >> - start = reg & 0xffffff00; /* 39:16 on 31:8*/ >> - start <<= 8; >> - reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); >> + start = (reg & 0xffffff00UL) << 8; /* 39:16 on 31:8 */ >> + >> + /* Limit lo */ >> + reg = _amd_read_pci_config(bus, slot, 1, limit); >> node = reg & 0x07; >> link = (reg >> 4) & 0x03; >> - end = (reg & 0xffffff00); >> - end <<= 8; >> - end |= 0xffff; >> + end = (reg & 0xffffff00UL) << 8; /* 39:16 on 31:8 */ >> + end |= 0xffffUL; >> >> - info = find_pci_root_info(node, link); >> + /* Base/Limit hi */ >> + tmp = _amd_read_pci_config(bus, slot, 1, base_limit_hi); >> + start |= ((tmp & 0xffUL) << 40); >> + end |= ((tmp & (0xffUL << 16)) << 24); >> >> + info = find_pci_root_info(node, link); >> if (!info) >> continue; >> >> @@ -354,20 +432,24 @@ static struct notifier_block amd_cpu_notifier = { >> .notifier_call = amd_cpu_notify, >> }; >> >> -static void __init pci_enable_pci_io_ecs(void) >> +static void __init pci_enable_pci_io_ecs(u8 bus, u8 slot) >> { >> #ifdef CONFIG_AMD_NB >> unsigned int i, n; >> + u8 limit; >> >> for (n = i = 0; !n && amd_nb_bus_dev_ranges[i].dev_limit; ++i) { >> - u8 bus = amd_nb_bus_dev_ranges[i].bus; >> - u8 slot = amd_nb_bus_dev_ranges[i].dev_base; >> - u8 limit = amd_nb_bus_dev_ranges[i].dev_limit; >> + /* Try matching for the bus range */ >> + if ((bus != amd_nb_bus_dev_ranges[i].bus) || >> + (slot != amd_nb_bus_dev_ranges[i].dev_base)) >> + continue; >> + >> + limit = amd_nb_bus_dev_ranges[i].dev_limit; >> >> + /* Setup all northbridges within the range */ >> for (; slot < limit; ++slot) { >> u32 val = read_pci_config(bus, slot, 3, 0); >> - >> - if (!early_is_amd_nb(val)) >> + if (!val) >> continue; >> >> val = read_pci_config(bus, slot, 3, 0x8c); >> @@ -375,13 +457,14 @@ static void __init pci_enable_pci_io_ecs(void) >> val |= ENABLE_CF8_EXT_CFG >> 32; > > What a fun shifting! > > Maybe you should do > > #define ENABLE_CF8_EXT_CFG BIT(46 - 32) > > to show exactly what you mean and how the bit is defined in MSR NB_CFG1 > and also show how the high 32-bits are mapped into F3x8c, while at it. > > And then you can drop the shifting at the call site. > > Yes, this confused me at first also so I added an additional ENABLE_CF8_EXT_CFG >> write_pci_config(bus, slot, 3, 0x8c, val); >> } >> + amd_early_ecs_enabled = true; > > You probably should check whether the PCI config write stuck before > setting this. > >> ++n; >> } >> } >> #endif >> } >> >> -static int __init pci_io_ecs_init(void) >> +static int __init pci_io_ecs_init(u8 bus, u8 slot) >> { >> int cpu; >> >> @@ -389,9 +472,7 @@ static int __init pci_io_ecs_init(void) >> if (boot_cpu_data.x86 < 0x10) >> return 0; >> >> - /* Try the PCI method first. */ >> - if (early_pci_allowed()) >> - pci_enable_pci_io_ecs(); > > Where did the if-check go? > Good catch. I assume Suravee didn't drop this on purpose? >> + pci_enable_pci_io_ecs(bus, slot); >> >> cpu_notifier_register_begin(); >> for_each_online_cpu(cpu) >> @@ -411,7 +492,6 @@ static int __init amd_postcore_init(void) >> return 0; >> >> early_fill_mp_bus_info(); >> - pci_io_ecs_init(); >> >> return 0; >> } >> > > -- > Regards/Gruss, > Boris. > > Sent from a fat crate under my desk. Formatting is fine. > -- > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/