Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753161AbaFATJ2 (ORCPT ); Sun, 1 Jun 2014 15:09:28 -0400 Received: from mail-lb0-f171.google.com ([209.85.217.171]:50555 "EHLO mail-lb0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752340AbaFATJ0 (ORCPT ); Sun, 1 Jun 2014 15:09:26 -0400 Message-ID: <538B7A64.1000306@cogentembedded.com> Date: Sun, 01 Jun 2014 23:09:24 +0400 From: Sergei Shtylyov Organization: Cogent Embedded User-Agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.5.0 MIME-Version: 1.0 To: Michael Braun , Ivo van Doorn , Helmut Schaa CC: netdev@vger.kernel.org, users@rt2x00.serialmonkey.com, linux-wireless@vger.kernel.org, "John W. Linville" , linux-kernel@vger.kernel.org Subject: Re: [PATCH 2/2] rt2800usb:fix hang during firmware load References: <20140601174736.7980.18330.stgit@charlie.fem.tu-ilmenau.de> <20140601175252.7980.64143.stgit@charlie.fem.tu-ilmenau.de> In-Reply-To: <20140601175252.7980.64143.stgit@charlie.fem.tu-ilmenau.de> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 06/01/2014 09:52 PM, Michael Braun wrote: > The device 057c:8501 (AVM Fritz! WLAN v2 rev. B) boots into a state that does not actually require loading a firmware file. Wrap the changelog lines on at least 80 chars please. > The vendors driver finds out about this by checking a firmware state > register, so this patch adopts this here. > Finally, with this patch applied, my wifi dongle actually becomes > usefull (scan + connect to wpa network works). s/usefull/useful/. > Signed-off-by: Michael Braun > --- > drivers/net/wireless/rt2x00/rt2800usb.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c > index b601422..71bf101 100644 > --- a/drivers/net/wireless/rt2x00/rt2800usb.c > +++ b/drivers/net/wireless/rt2x00/rt2800usb.c > @@ -240,6 +240,7 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, > int status; > u32 offset; > u32 length; > + __le32 fwMode; > > /* > * Check which section of the firmware we need. > @@ -257,8 +258,17 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, > /* > * Write firmware to device. > */ > - rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, > - data + offset, length); > + rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE, > + USB_VENDOR_REQUEST_IN, 0, 0x11, &fwMode, > + sizeof(fwMode), REGISTER_TIMEOUT_FIRMWARE); > + > + if ((fwMode & 0x00000003) == 2) { Same comment as for the patch #1. > + rt2x00_info(rt2x00dev, > + "Firmware loading not required - NIC in AutoRun mode\n"); This line should start under 'rt2xx00dev', like below. > + } else { > + rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, > + data + offset, length); > + } WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/