Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 15 Nov 2002 13:14:29 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 15 Nov 2002 13:14:29 -0500 Received: from roc-24-169-118-30.rochester.rr.com ([24.169.118.30]:8628 "EHLO death.krwtech.com") by vger.kernel.org with ESMTP id ; Fri, 15 Nov 2002 13:14:27 -0500 Date: Fri, 15 Nov 2002 13:21:14 -0500 (EST) From: Ken Witherow X-X-Sender: ken@death Reply-To: Ken Witherow To: steve roemen cc: "'David Crooke'" , Subject: RE: Dual athlon XP 1800 problems In-Reply-To: <005801c28cce$1d6e6180$e70a7aa5@WSXA7NCC106.wcomnet.com> Message-ID: Organization: KRW Technologies MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1210 Lines: 31 On Fri, 15 Nov 2002, steve roemen wrote: > i had similar issues on my old 2460 board. > > i found out that a huge power supply doesn't cut it, you need a QUALITY > power supply of ~400watts( more specifically the 5 volt bus). > > i also found out the hard way that i believe tyan didn't design that board > properly because the 5 volt part of the connectors were burned up on the PS > and MB. > > i've since replaced with a s2466n-4m and am very happy. > > i'd check your power supply connector before it burns up yours too... PSU connector is fine... and I definitely need the extra juice since I'm running quite a bit of power hungry hardware in this box (5 SCSI drives, a GF4, etc). Both power supplies are pretty good Antecs. It does bother me that they didn't use the AUX connector for the extra 5V power though -- Ken Witherow ICQ: 21840670 AIM: phantomlordken http://www.krwtech.com/ken - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/