Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752995AbaFEPvg (ORCPT ); Thu, 5 Jun 2014 11:51:36 -0400 Received: from top.free-electrons.com ([176.31.233.9]:58892 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751866AbaFEPsx (ORCPT ); Thu, 5 Jun 2014 11:48:53 -0400 From: =?UTF-8?q?Antoine=20T=C3=A9nart?= To: sebastian.hesselbarth@gmail.com, balbi@ti.com Cc: =?UTF-8?q?Antoine=20T=C3=A9nart?= , alexandre.belloni@free-electrons.com, thomas.petazzoni@free-electrons.com, zmxu@marvell.com, jszhang@marvell.com, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 5/9] Documentation: bindings: add doc for the Berlin USB PHY Date: Thu, 5 Jun 2014 17:48:42 +0200 Message-Id: <1401983326-19205-6-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1401983326-19205-1-git-send-email-antoine.tenart@free-electrons.com> References: <1401983326-19205-1-git-send-email-antoine.tenart@free-electrons.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Document the bindings of the Marvell Berlin USB PHY driver. Signed-off-by: Antoine Ténart --- .../devicetree/bindings/usb/berlin-usbphy.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/berlin-usbphy.txt diff --git a/Documentation/devicetree/bindings/usb/berlin-usbphy.txt b/Documentation/devicetree/bindings/usb/berlin-usbphy.txt new file mode 100644 index 000000000000..d97eb1f9d53f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/berlin-usbphy.txt @@ -0,0 +1,18 @@ +* Marvell Berlin USB PHY + +Required properties: +- compatible: should be "marvell,berlin-usbphy" +- reg: base address and length of the registers +- #phys-cells: should be 0 +- reset: reference to the reset controller +- power-gpio: reference the GPIO pin to power the PHY + +Example: + + usbphy@f774000 { + compatible = "marvell,berlin-usbphy"; + reg = <0xf774000 0x128>; + #phy-cells = <0>; + resets = <&chip 14>; + power-gpio = <&portb 8 GPIO_ACTIVE_HIGH>; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/