Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933557AbaFIIzh (ORCPT ); Mon, 9 Jun 2014 04:55:37 -0400 Received: from ip4-83-240-18-248.cust.nbox.cz ([83.240.18.248]:58570 "EHLO ip4-83-240-18-248.cust.nbox.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932222AbaFIIv1 (ORCPT ); Mon, 9 Jun 2014 04:51:27 -0400 From: Jiri Slaby To: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Marcel Apfelbaum , Bjorn Helgaas , Jiri Slaby Subject: [PATCH 3.12 114/146] PCI: shpchp: Check bridge's secondary (not primary) bus speed Date: Mon, 9 Jun 2014 10:50:49 +0200 Message-Id: <98c3993a29a9dadc34874a55a24276ff6f24cb8c.1402303821.git.jslaby@suse.cz> X-Mailer: git-send-email 1.9.3 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Marcel Apfelbaum 3.12-stable review patch. If anyone has any objections, please let me know. =============== commit 93fa9d32670f5592c8e56abc9928fc194e1e72fc upstream. When a new device is added below a hotplug bridge, the bridge's secondary bus speed and the device's bus speed must match. The shpchp driver previously checked the bridge's *primary* bus speed, not the secondary bus speed. This caused hot-add errors like: shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch Check the secondary bus speed instead. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251 Fixes: 3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core") Signed-off-by: Marcel Apfelbaum Signed-off-by: Bjorn Helgaas Acked-by: Michael S. Tsirkin Signed-off-by: Jiri Slaby --- drivers/pci/hotplug/shpchp_ctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 58499277903a..6efc2ec5e4db 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -282,8 +282,8 @@ static int board_added(struct slot *p_slot) return WRONG_BUS_FREQUENCY; } - bsp = ctrl->pci_dev->bus->cur_bus_speed; - msp = ctrl->pci_dev->bus->max_bus_speed; + bsp = ctrl->pci_dev->subordinate->cur_bus_speed; + msp = ctrl->pci_dev->subordinate->max_bus_speed; /* Check if there are other slots or devices on the same bus */ if (!list_empty(&ctrl->pci_dev->subordinate->devices)) -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/