Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751477AbaFOOzd (ORCPT ); Sun, 15 Jun 2014 10:55:33 -0400 Received: from top.free-electrons.com ([176.31.233.9]:51067 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750989AbaFOOz3 (ORCPT ); Sun, 15 Jun 2014 10:55:29 -0400 Message-ID: <539DB3DF.5050301@free-electrons.com> Date: Sun, 15 Jun 2014 16:55:27 +0200 From: Boris BREZILLON User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.5.0 MIME-Version: 1.0 To: jjhiblot@traphandler.com, Thierry Reding , Nicolas Ferre , David Airlie , Samuel Ortiz , Lee Jones CC: Alexandre Belloni , Jean-Christophe Plagniol-Villard , Laurent Pinchart , devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org Subject: Re: [PATCH v2 2/7] pwm: add support for atmel-hlcdc-pwm device References: <1402329860-27520-1-git-send-email-boris.brezillon@free-electrons.com> <1402329860-27520-3-git-send-email-boris.brezillon@free-electrons.com> <539D6328.4020505@traphandler.com> In-Reply-To: <539D6328.4020505@traphandler.com> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hello JJ, On 15/06/2014 11:11, Jean-Jacques Hiblot wrote: > > On 06/09/2014 06:04 PM, Boris BREZILLON wrote: >> The HLCDC IP available in some Atmel SoCs (i.e. sam9x5i.e. at91sam9n12, >> at91sam9x5 family or sama5d3 family) provide a PWM device. >> >> This driver add support for this PWM device. >> >> Signed-off-by: Boris BREZILLON >> --- >> .../devicetree/bindings/pwm/atmel-hlcdc-pwm.txt | 40 ++++ >> drivers/pwm/Kconfig | 9 + >> drivers/pwm/Makefile | 1 + >> drivers/pwm/pwm-atmel-hlcdc.c | 216 +++++++++++++++++++++ >> 4 files changed, 266 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt >> create mode 100644 drivers/pwm/pwm-atmel-hlcdc.c >> >> diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt >> new file mode 100644 >> index 0000000..5e2ba87 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt >> @@ -0,0 +1,40 @@ [...] >> +++ b/drivers/pwm/Kconfig >> @@ -50,6 +50,15 @@ config PWM_ATMEL >> To compile this driver as a module, choose M here: the module >> will be called pwm-atmel. >> >> +config PWM_ATMEL_HLCDC_PWM >> + tristate "Atmel HLCDC PWM support" >> + depends on MFD_ATMEL_HLCDC > I'd personnaly prefer a 'select' instead of 'depends on' here. Or maybe > the MFD driver should enabled y defaut for platforms supporting the hlcdc. I don't have any strong opinion on the "select" vs "depends on" approach. Does anyone else think we should use a 'select' instead of a 'depends on' ? I see at least one benefit, we would be able to see the HLCDC_PWM option even if the HLCDC driver is not enabled. Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/