Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932651AbaFPSqY (ORCPT ); Mon, 16 Jun 2014 14:46:24 -0400 Received: from seldrel01.sonyericsson.com ([212.209.106.2]:8179 "EHLO seldrel01.sonyericsson.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755719AbaFPSqV (ORCPT ); Mon, 16 Jun 2014 14:46:21 -0400 From: Bjorn Andersson To: Rob Herring , Mark Rutland , Liam Girdwood , Mark Brown , Kumar Gala CC: Lee Jones , Josh Cartwright , , , , Subject: [PATCH v3 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding Date: Mon, 16 Jun 2014 11:46:10 -0700 Message-ID: <1402944372-31901-2-git-send-email-bjorn.andersson@sonymobile.com> X-Mailer: git-send-email 1.8.2.2 In-Reply-To: <1402944372-31901-1-git-send-email-bjorn.andersson@sonymobile.com> References: <1402944372-31901-1-git-send-email-bjorn.andersson@sonymobile.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660, 8960 and 8064 based devices. The binding currently describes the rpm itself and the regulator subnodes. Signed-off-by: Bjorn Andersson --- .../devicetree/bindings/soc/qcom/qcom,rpm.txt | 260 +++++++++++++++++++++ include/dt-bindings/soc/qcom,rpm.h | 142 +++++++++++ 2 files changed, 402 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt create mode 100644 include/dt-bindings/soc/qcom,rpm.h diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt new file mode 100644 index 0000000..0366533 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt @@ -0,0 +1,260 @@ +Qualcomm Resource Power Manager (RPM) + +This driver is used to interface with the Resource Power Manager (RPM) found in +various Qualcomm platforms. The RPM allows each component in the system to vote +for state of the system resources, such as clocks, regulators and bus +frequencies. + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-apq8064" + "qcom,rpm-msm8660" + "qcom,rpm-msm8960" + +- reg: + Usage: required + Value type: + Definition: two entries specifying the RPM's message ram and ipc register + +- reg-names: + Usage: required + Value type: + Definition: must contain the following, in order: + "msg_ram" + "ipc" + +- interrupts: + Usage: required + Value type: + Definition: three entries specifying the RPM's: + 1. acknowledgement interrupt + 2. error interrupt + 3. wakeup interrupt + +- interrupt-names: + Usage: required + Value type: + Definition: must be the three strings "ack", "err" and "wakeup", in order + +- #address-cells: + Usage: required + Value type: + Definition: must be 1 + +- #size-cells: + Usage: required + Value type: + Definition: must be 0 + + += SUBDEVICES + +The RPM exposes resources to its subnodes. The below bindings specify the set +of valid subnodes that can operate on these resources. + +== Switch-mode Power Supply regulator + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-pm8058-smps" + "qcom,rpm-pm8901-ftsmps" + "qcom,rpm-pm8921-smps" + "qcom,rpm-pm8921-ftsmps" + +- reg: + Usage: required + Value type: + Definition: resource as defined in + +- bias-pull-down: + Usage: optional + Value type: + Definition: enable pull down of the regulator when inactive + +- qcom,switch-mode-frequency: + Usage: required + Value type: + Definition: Frequency (Hz) of the switch-mode power supply; + must be one of: + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, + 1480000, 1370000, 1280000, 1200000 + +- qcom,force-mode-none: + Usage: optional (default if no other qcom,force-mode is specified) + Value type: + Defintion: indicates that the regulator should not be forced to any + particular mode + +- qcom,force-mode-lpm: + Usage: optional + Value type: + Definition: indicates that the regulator should be forced to operate in + low-power-mode + +- qcom,force-mode-auto: + Usage: optional (only available for 8960/8064) + Value type: + Definition: indicates that the regulator should be automatically pick + operating mode + +- qcom,force-mode-hpm: + Usage: optional (only available for 8960/8064) + Value type: + Definition: indicates that the regulator should be forced to operate in + high-power-mode + +- qcom,force-mode-bypass: (only for 8960/8064) + Usage: optional (only available for 8960/8064) + Value type: + Definition: indicates that the regulator should be forced to operate in + bypass mode + +- qcom,power-mode-hysteretic: + Usage: optional + Value type: + Definition: indicates that the power supply should operate in hysteretic + mode (defaults to qcom,power-mode-pwm if not specified) + +- qcom,power-mode-pwm: + Usage: optional + Value type: + Definition: indicates that the power supply should operate in pwm mode + +Standard regulator bindings are used inside switch mode power supply subnodes. +Check Documentation/devicetree/bindings/regulator/regulator.txt for more +details. + +== Low-dropout regulator + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-pm8058-pldo" + "qcom,rpm-pm8058-nldo" + "qcom,rpm-pm8901-pldo" + "qcom,rpm-pm8901-nldo" + "qcom,rpm-pm8921-pldo" + "qcom,rpm-pm8921-nldo" + "qcom,rpm-pm8921-nldo1200" + +- reg: + Usage: required + Value type: + Definition: resource as defined in + +- bias-pull-down: + Usage: optional + Value type: + Definition: enable pull down of the regulator when inactive + +- qcom,force-mode-none: + Usage: optional (default if no other qcom,force-mode is specified) + Value type: + Defintion: indicates that the regulator should not be forced to any + particular mode + +- qcom,force-mode-lpm: + Usage: optional + Value type: + Definition: indicates that the regulator should be forced to operate in + low-power-mode + +- qcom,force-mode-auto: + Usage: optional (only available for 8960/8064) + Value type: + Definition: indicates that the regulator should be automatically pick + operating mode + +- qcom,force-mode-hpm: + Usage: optional (only available for 8960/8064) + Value type: + Definition: indicates that the regulator should be forced to operate in + high-power-mode + +- qcom,force-mode-bypass: (only for 8960/8064) + Usage: optional (only available for 8960/8064) + Value type: + Definition: indicates that the regulator should be forced to operate in + bypass mode + +Standard regulator bindings are used inside switch low-dropout regulator +subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for +more details. + +== Negative Charge Pump + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-pm8058-ncp" + "qcom,rpm-pm8921-ncp" + +- reg: + Usage: required + Value type: + Definition: resource as defined in + +- qcom,switch-mode-frequency: + Usage: required + Value type: + Definition: Frequency (Hz) of the swith mode power supply; + must be one of: + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, + 1480000, 1370000, 1280000, 1200000 + +Standard regulator bindings are used inside negative charge pump regulator +subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for +more details. + +== Switch + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-pm8058-switch" + "qcom,rpm-pm8901-switch" + "qcom,rpm-pm8921-switch" + +- reg: + Usage: required + Value type: + Definition: resource as defined in + + += EXAMPLE + + #include + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000 0x2011008 0x4>; + + interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupt-names = "ack", "err", "wakeup"; + + #address-cells = <1>; + #size-cells = <0>; + + pm8921_s1: pm8921-s1 { + compatible = "qcom,rpm-pm8921-smps"; + reg = ; + + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + }; + diff --git a/include/dt-bindings/soc/qcom,rpm.h b/include/dt-bindings/soc/qcom,rpm.h new file mode 100644 index 0000000..d9d840b --- /dev/null +++ b/include/dt-bindings/soc/qcom,rpm.h @@ -0,0 +1,142 @@ +/* + * This header provides constants for the Qualcomm RPM bindings. + */ + +#ifndef _DT_BINDINGS_SOC_QCOM_RPM_H +#define _DT_BINDINGS_SOC_QCOM_RPM_H + +#define QCOM_RPM_APPS_FABRIC_ARB 1 +#define QCOM_RPM_APPS_FABRIC_CLK 2 +#define QCOM_RPM_APPS_FABRIC_HALT 3 +#define QCOM_RPM_APPS_FABRIC_IOCTL 4 +#define QCOM_RPM_APPS_FABRIC_MODE 5 +#define QCOM_RPM_APPS_L2_CACHE_CTL 6 +#define QCOM_RPM_CFPB_CLK 7 +#define QCOM_RPM_CXO_BUFFERS 8 +#define QCOM_RPM_CXO_CLK 9 +#define QCOM_RPM_DAYTONA_FABRIC_CLK 10 +#define QCOM_RPM_DDR_DMM 11 +#define QCOM_RPM_EBI1_CLK 12 +#define QCOM_RPM_HDMI_SWITCH 13 +#define QCOM_RPM_MMFPB_CLK 14 +#define QCOM_RPM_MM_FABRIC_ARB 15 +#define QCOM_RPM_MM_FABRIC_CLK 16 +#define QCOM_RPM_MM_FABRIC_HALT 17 +#define QCOM_RPM_MM_FABRIC_IOCTL 18 +#define QCOM_RPM_MM_FABRIC_MODE 19 +#define QCOM_RPM_PLL_4 20 +#define QCOM_RPM_PM8058_LDO0 21 +#define QCOM_RPM_PM8058_LDO1 22 +#define QCOM_RPM_PM8058_LDO2 23 +#define QCOM_RPM_PM8058_LDO3 24 +#define QCOM_RPM_PM8058_LDO4 25 +#define QCOM_RPM_PM8058_LDO5 26 +#define QCOM_RPM_PM8058_LDO6 27 +#define QCOM_RPM_PM8058_LDO7 28 +#define QCOM_RPM_PM8058_LDO8 29 +#define QCOM_RPM_PM8058_LDO9 30 +#define QCOM_RPM_PM8058_LDO10 31 +#define QCOM_RPM_PM8058_LDO11 32 +#define QCOM_RPM_PM8058_LDO12 33 +#define QCOM_RPM_PM8058_LDO13 34 +#define QCOM_RPM_PM8058_LDO14 35 +#define QCOM_RPM_PM8058_LDO15 36 +#define QCOM_RPM_PM8058_LDO16 37 +#define QCOM_RPM_PM8058_LDO17 38 +#define QCOM_RPM_PM8058_LDO18 39 +#define QCOM_RPM_PM8058_LDO19 40 +#define QCOM_RPM_PM8058_LDO20 41 +#define QCOM_RPM_PM8058_LDO21 42 +#define QCOM_RPM_PM8058_LDO22 43 +#define QCOM_RPM_PM8058_LDO23 44 +#define QCOM_RPM_PM8058_LDO24 45 +#define QCOM_RPM_PM8058_LDO25 46 +#define QCOM_RPM_PM8058_LVS0 47 +#define QCOM_RPM_PM8058_LVS1 48 +#define QCOM_RPM_PM8058_NCP 49 +#define QCOM_RPM_PM8058_SMPS0 50 +#define QCOM_RPM_PM8058_SMPS1 51 +#define QCOM_RPM_PM8058_SMPS2 52 +#define QCOM_RPM_PM8058_SMPS3 53 +#define QCOM_RPM_PM8058_SMPS4 54 +#define QCOM_RPM_PM8821_L1 55 +#define QCOM_RPM_PM8821_S1 56 +#define QCOM_RPM_PM8821_S2 57 +#define QCOM_RPM_PM8901_LDO0 58 +#define QCOM_RPM_PM8901_LDO1 59 +#define QCOM_RPM_PM8901_LDO2 60 +#define QCOM_RPM_PM8901_LDO3 61 +#define QCOM_RPM_PM8901_LDO4 62 +#define QCOM_RPM_PM8901_LDO5 63 +#define QCOM_RPM_PM8901_LDO6 64 +#define QCOM_RPM_PM8901_LVS0 65 +#define QCOM_RPM_PM8901_LVS1 66 +#define QCOM_RPM_PM8901_LVS2 67 +#define QCOM_RPM_PM8901_LVS3 68 +#define QCOM_RPM_PM8901_MVS 69 +#define QCOM_RPM_PM8901_SMPS0 70 +#define QCOM_RPM_PM8901_SMPS1 71 +#define QCOM_RPM_PM8901_SMPS2 72 +#define QCOM_RPM_PM8901_SMPS3 73 +#define QCOM_RPM_PM8901_SMPS4 74 +#define QCOM_RPM_PM8921_CLK1 75 +#define QCOM_RPM_PM8921_CLK2 76 +#define QCOM_RPM_PM8921_L1 77 +#define QCOM_RPM_PM8921_L2 78 +#define QCOM_RPM_PM8921_L3 79 +#define QCOM_RPM_PM8921_L4 80 +#define QCOM_RPM_PM8921_L5 81 +#define QCOM_RPM_PM8921_L6 82 +#define QCOM_RPM_PM8921_L7 83 +#define QCOM_RPM_PM8921_L8 84 +#define QCOM_RPM_PM8921_L9 85 +#define QCOM_RPM_PM8921_L10 86 +#define QCOM_RPM_PM8921_L11 87 +#define QCOM_RPM_PM8921_L12 88 +#define QCOM_RPM_PM8921_L13 89 +#define QCOM_RPM_PM8921_L14 90 +#define QCOM_RPM_PM8921_L15 91 +#define QCOM_RPM_PM8921_L16 92 +#define QCOM_RPM_PM8921_L17 93 +#define QCOM_RPM_PM8921_L18 94 +#define QCOM_RPM_PM8921_L19 95 +#define QCOM_RPM_PM8921_L20 96 +#define QCOM_RPM_PM8921_L21 97 +#define QCOM_RPM_PM8921_L22 98 +#define QCOM_RPM_PM8921_L23 99 +#define QCOM_RPM_PM8921_L24 100 +#define QCOM_RPM_PM8921_L25 101 +#define QCOM_RPM_PM8921_L26 102 +#define QCOM_RPM_PM8921_L27 103 +#define QCOM_RPM_PM8921_L28 104 +#define QCOM_RPM_PM8921_L29 105 +#define QCOM_RPM_PM8921_LVS1 106 +#define QCOM_RPM_PM8921_LVS2 107 +#define QCOM_RPM_PM8921_LVS3 108 +#define QCOM_RPM_PM8921_LVS4 109 +#define QCOM_RPM_PM8921_LVS5 110 +#define QCOM_RPM_PM8921_LVS6 111 +#define QCOM_RPM_PM8921_LVS7 112 +#define QCOM_RPM_PM8921_MVS 113 +#define QCOM_RPM_PM8921_NCP 114 +#define QCOM_RPM_PM8921_S1 115 +#define QCOM_RPM_PM8921_S2 116 +#define QCOM_RPM_PM8921_S3 117 +#define QCOM_RPM_PM8921_S4 118 +#define QCOM_RPM_PM8921_S5 119 +#define QCOM_RPM_PM8921_S6 120 +#define QCOM_RPM_PM8921_S7 121 +#define QCOM_RPM_PM8921_S8 122 +#define QCOM_RPM_PXO_CLK 123 +#define QCOM_RPM_QDSS_CLK 124 +#define QCOM_RPM_SFPB_CLK 125 +#define QCOM_RPM_SMI_CLK 126 +#define QCOM_RPM_SYS_FABRIC_ARB 127 +#define QCOM_RPM_SYS_FABRIC_CLK 128 +#define QCOM_RPM_SYS_FABRIC_HALT 129 +#define QCOM_RPM_SYS_FABRIC_IOCTL 130 +#define QCOM_RPM_SYS_FABRIC_MODE 131 +#define QCOM_RPM_USB_OTG_SWITCH 132 +#define QCOM_RPM_VDDMIN_GPIO 133 + +#endif -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/