Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755923AbaFPUDx (ORCPT ); Mon, 16 Jun 2014 16:03:53 -0400 Received: from smtp.codeaurora.org ([198.145.11.231]:45556 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755021AbaFPUDv (ORCPT ); Mon, 16 Jun 2014 16:03:51 -0400 From: Kumar Gala To: Kishon Vijay Abraham I Cc: Kumar Gala , linux-ide@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, sboyd@codeaurora.org Subject: [PATCH v3 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY Date: Mon, 16 Jun 2014 14:54:37 -0500 Message-Id: <1402948477-12347-1-git-send-email-galak@codeaurora.org> X-Mailer: git-send-email 1.8.2.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add a PHY driver for uses with AHCI based SATA controller driver on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala --- v3: * Added Kconfig HAS_IOMEM dep * re-ordered probe function so phy_provider_register is last v2: * dropped unused dev pointer in struct qcom_ipq806x_sata_phy * remove unnecessary reg initializaiton * Removed unneeded error message * Added remove function to disable the clock drivers/phy/Kconfig | 7 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-qcom-ipq806x-sata.c | 211 ++++++++++++++++++++++++++++++++++++ 3 files changed, 219 insertions(+) create mode 100644 drivers/phy/phy-qcom-ipq806x-sata.c diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f06..b7b6bce 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -178,4 +178,11 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. +config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index b4f1d57..d950317 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -20,3 +20,4 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/phy-qcom-ipq806x-sata.c new file mode 100644 index 0000000..e931aee --- /dev/null +++ b/drivers/phy/phy-qcom-ipq806x-sata.c @@ -0,0 +1,211 @@ +/* + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct qcom_ipq806x_sata_phy { + void __iomem *mmio; + struct clk *cfg_clk; +}; + +#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) + +#define SATA_PHY_P0_PARAM0 0x200 +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0) + +#define SATA_PHY_P0_PARAM1 0x204 +#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0) + +#define SATA_PHY_P0_PARAM2 0x208 +#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18) +#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18) + +#define SATA_PHY_P0_PARAM3 0x20C +#define SATA_PHY_SSC_EN 0x8 +#define SATA_PHY_P0_PARAM4 0x210 +#define SATA_PHY_REF_SSP_EN 0x2 +#define SATA_PHY_RESET 0x1 + +static inline void qcom_ipq806x_sata_delay_us(unsigned int delay) +{ + /* sleep for max. 50us more to combine processor wakeups */ + usleep_range(delay, delay + 50); +} + +static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy) +{ + struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); + u32 reg; + + /* Setting SSC_EN to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3); + reg = reg | SATA_PHY_SSC_EN; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) & + ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK | + SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK | + SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK); + reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) & + ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK); + reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) & + ~SATA_PHY_P0_PARAM2_RX_EQ_MASK; + reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2); + + /* Setting PHY_RESET to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + /* Setting REF_SSP_EN to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + mb(); + qcom_ipq806x_sata_delay_us(20); + + /* Clearing PHY_RESET to 0 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg & ~SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + return 0; +} + +static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy) +{ + struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); + u32 reg; + + /* Setting PHY_RESET to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + return 0; +} + +static struct phy_ops qcom_ipq806x_sata_phy_ops = { + .init = qcom_ipq806x_sata_phy_init, + .exit = qcom_ipq806x_sata_phy_exit, + .owner = THIS_MODULE, +}; + +static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev) +{ + struct qcom_ipq806x_sata_phy *phy; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(dev, "%s: failed to allocate phy\n", __func__); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->mmio)) + return PTR_ERR(phy->mmio); + + generic_phy = devm_phy_create(dev, &qcom_ipq806x_sata_phy_ops, NULL); + if (IS_ERR(generic_phy)) { + dev_err(dev, "%s: failed to create phy\n", __func__); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, phy); + + phy->cfg_clk = devm_clk_get(dev, "cfg"); + if (IS_ERR(phy->cfg_clk)) { + dev_err(dev, "Failed to get sata cfg clock\n"); + return PTR_ERR(phy->cfg_clk); + } + + ret = clk_prepare_enable(phy->cfg_clk); + if (ret) + return ret; + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + clk_disable_unprepare(phy->cfg_clk); + dev_err(dev, "%s: failed to register phy\n", __func__); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev) +{ + struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev); + + clk_disable_unprepare(phy->cfg_clk); + + return 0; +} + +static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = { + { .compatible = "qcom,ipq806x-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match); + +static struct platform_driver qcom_ipq806x_sata_phy_driver = { + .probe = qcom_ipq806x_sata_phy_probe, + .remove = qcom_ipq806x_sata_phy_remove, + .driver = { + .name = "qcom-ipq806x-sata-phy", + .owner = THIS_MODULE, + .of_match_table = qcom_ipq806x_sata_phy_of_match, + } +}; +module_platform_driver(qcom_ipq806x_sata_phy_driver); + +MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver"); +MODULE_LICENSE("GPL v2"); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/