Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932586AbaFPV6y (ORCPT ); Mon, 16 Jun 2014 17:58:54 -0400 Received: from avon.wwwdotorg.org ([70.85.31.133]:54490 "EHLO avon.wwwdotorg.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932524AbaFPV6u (ORCPT ); Mon, 16 Jun 2014 17:58:50 -0400 Message-ID: <539F6897.7080306@wwwdotorg.org> Date: Mon, 16 Jun 2014 15:58:47 -0600 From: Stephen Warren User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.5.0 MIME-Version: 1.0 To: Mikko Perttunen , thierry.reding@gmail.com, tj@kernel.org, pdeschrijver@nvidia.com CC: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org, linux-ide@vger.kernel.org, devicetree@vger.kernel.org Subject: Re: [PATCH 3/9] ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree References: <1401881559-18469-1-git-send-email-mperttunen@nvidia.com> <1401881559-18469-4-git-send-email-mperttunen@nvidia.com> In-Reply-To: <1401881559-18469-4-git-send-email-mperttunen@nvidia.com> X-Enigmail-Version: 1.5.2 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 06/04/2014 05:32 AM, Mikko Perttunen wrote: > This enables the integrated SATA controller on the Tegra124 system-on-chip > on the Jetson TK1 board and adds regulators for the onboard Molex connector > commonly used to power SATA devices. The regulators are marked always-on > since they can be used for other purposes than powering SATA devices. > diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts > + sata@0,70020000 { > + target-supply = <&vdd_5v0_sata>; regulators { > + /* Molex power connector */ > + vdd_5v0_sata: regulator@13 { > + compatible = "regulator-fixed"; > + reg = <13>; > + regulator-name = "+5V_SATA"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; > + enable-active-high; > + vin-supply = <&vdd_5v0_sys>; > + regulator-always-on; > + }; Why is this always-on, considering that the SATA node references this, and presumably the driver explicitly enables this regulator? > + > + vdd_12v0_sata: regulator@14 { > + compatible = "regulator-fixed"; > + reg = <14>; > + regulator-name = "+12V_SATA"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; > + enable-active-high; > + vin-supply = <&vdd_mux>; > + regulator-always-on; > + }; > }; If there are two regulators required for the SATA devices, shouldn't the SATA node's target-supply property reference them both? Well, I suppose there'd need to be target-5v-supply and target-12v-supply properties, since each regulator property can only reference a single supply, IIRC. I think the DT binding needs to be updated for this. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/