Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932579AbaFQH6X (ORCPT ); Tue, 17 Jun 2014 03:58:23 -0400 Received: from mail-pb0-f41.google.com ([209.85.160.41]:38005 "EHLO mail-pb0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755294AbaFQH6T (ORCPT ); Tue, 17 Jun 2014 03:58:19 -0400 From: Zhangfei Gao To: Kishon Vijay Abraham I , arnd@arndb.de, mark.rutland@arm.com, haifeng.yan@linaro.org, jchxue@gmail.com, zhangfei.gao@linaro.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Jiancheng Xue Subject: [PATCH 2/2] phy: add hix5hd2-sata-phy driver Date: Tue, 17 Jun 2014 15:58:01 +0800 Message-Id: <1402991881-27676-3-git-send-email-zhangfei.gao@linaro.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1402991881-27676-1-git-send-email-zhangfei.gao@linaro.org> References: <1402991881-27676-1-git-send-email-zhangfei.gao@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Jiancheng Xue Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc. Signed-off-by: Jiancheng Xue Signed-off-by: Zhangfei Gao --- drivers/phy/Kconfig | 8 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-hix5hd2-sata.c | 192 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 201 insertions(+) create mode 100644 drivers/phy/phy-hix5hd2-sata.c diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f06..782953d 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -109,6 +109,14 @@ config PHY_EXYNOS5250_SATA SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host port to accept one SATA device. +config PHY_HIX5HD2_SATA + tristate "HIX5HD2 SATA PHY Driver" + depends on ARCH_HIX5HD2 && OF + select GENERIC_PHY + select MFD_SYSCON + help + Support for SATA PHY on Hisilicon hix5hd2 Soc. + config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index b4f1d57..54f04d0 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o phy-exynos-usb2-y += phy-samsung-usb2.o diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/phy-hix5hd2-sata.c new file mode 100644 index 0000000..107804b4 --- /dev/null +++ b/drivers/phy/phy-hix5hd2-sata.c @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2014 Linaro Ltd. + * Copyright (c) 2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define SATA_PHY0_CTLL 0xa0 +#define MPLL_MULTIPLIER_SHIFT 1 +#define MPLL_MULTIPLIER_WIDTH 7 +#define MPLL_MULTIPLIER_50M 0x3c +#define MPLL_MULTIPLIER_100M 0x1e +#define PHY_RESET BIT(0) +#define REF_SSP_EN BIT(9) +#define SSC_EN BIT(10) +#define REF_USE_PAD BIT(23) + +#define SATA_PORT_PHYCTL 0x174 +#define HALF_RATE_SHIFT 16 +#define HALF_RATE_WIDTH 2 +#define PHY_CONFIG_SHIFT 18 +#define PHY_CONFIG_WIDTH 2 +#define GEN2_EN_SHIFT 21 +#define GEN2_EN_WIDTH 2 +#define SPEED_CTRL BIT(20) + +struct hix5hd2_priv { + void __iomem *base; + struct regmap *peri_ctrl; + struct phy *phy; +}; + +enum phy_speed_mode { + SPEED_MODE_GEN1 = 0, + SPEED_MODE_GEN2 = 1, + SPEED_MODE_GEN3 = 2, +}; + +static void hix5hd2_sata_phy_write(void __iomem *addr, int shift, + int width, int value) +{ + int reg, mask; + + mask = BIT(width) - 1; + reg = readl_relaxed(addr); + reg &= ~(mask << shift); + reg |= (value & mask) << shift; + writel_relaxed(reg, addr); +} + +static void hix5hd2_sata_phy_setspeed(struct hix5hd2_priv *priv, + enum phy_speed_mode mode) +{ + hix5hd2_sata_phy_write(priv->base + SATA_PORT_PHYCTL, HALF_RATE_SHIFT, + HALF_RATE_WIDTH, mode); + hix5hd2_sata_phy_write(priv->base + SATA_PORT_PHYCTL, PHY_CONFIG_SHIFT, + PHY_CONFIG_WIDTH, mode); + hix5hd2_sata_phy_write(priv->base + SATA_PORT_PHYCTL, GEN2_EN_SHIFT, + GEN2_EN_WIDTH, mode); +} + +static int hix5hd2_sata_phy_init(struct phy *phy) +{ + struct hix5hd2_priv *priv = phy_get_drvdata(phy); + u32 offset, shift, width, value, data[2]; + const __be32 *paddr; + int i, lenp, ret; + + if (priv->peri_ctrl) { + ret = of_property_read_u32_array(phy->dev.of_node, + "hisilicon,power-reg", + &data[0], 2); + if (ret) + dev_warn(&phy->dev, "Fail read hisilicon,power-reg\n"); + + regmap_update_bits(priv->peri_ctrl, data[0], + BIT(data[1]), BIT(data[1])); + } + + /* reset phy */ + hix5hd2_sata_phy_write(priv->base + SATA_PHY0_CTLL, + MPLL_MULTIPLIER_SHIFT, MPLL_MULTIPLIER_WIDTH, + MPLL_MULTIPLIER_50M); + value = readl_relaxed(priv->base + SATA_PHY0_CTLL); + value &= ~(REF_USE_PAD); + value |= (REF_SSP_EN | PHY_RESET); + writel_relaxed(value, priv->base + SATA_PHY0_CTLL); + msleep(20); + value &= ~(PHY_RESET); + writel_relaxed(value, priv->base + SATA_PHY0_CTLL); + + paddr = of_get_property(phy->dev.of_node, "hisilicon,reg-init", &lenp); + if (!paddr || lenp < 4 * sizeof(*paddr)) + return 0; + + lenp /= sizeof(*paddr); + for (i = 0; i < lenp - 3; i += 4) { + offset = be32_to_cpup(paddr + i); + shift = be32_to_cpup(paddr + i + 1); + width = be32_to_cpup(paddr + i + 2); + value = be32_to_cpup(paddr + i + 3); + hix5hd2_sata_phy_write(priv->base + offset, + shift, width, value); + } + + /* ensure reg-init takes effect */ + value = readl_relaxed(priv->base + SATA_PORT_PHYCTL); + value |= SPEED_CTRL; + writel_relaxed(value, priv->base + SATA_PORT_PHYCTL); + hix5hd2_sata_phy_setspeed(priv, SPEED_MODE_GEN1); + msleep(20); + hix5hd2_sata_phy_setspeed(priv, SPEED_MODE_GEN3); + value = readl_relaxed(priv->base + SATA_PORT_PHYCTL); + value &= ~(SPEED_CTRL); + writel_relaxed(value, priv->base + SATA_PORT_PHYCTL); + hix5hd2_sata_phy_setspeed(priv, SPEED_MODE_GEN2); + + return 0; +} + +static struct phy_ops hix5hd2_sata_phy_ops = { + .init = hix5hd2_sata_phy_init, + .owner = THIS_MODULE, +}; + +static int hix5hd2_sata_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct resource *res; + struct hix5hd2_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap(dev, res->start, resource_size(res)); + if (!priv->base) + return -ENOMEM; + + priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,peri-syscon"); + if (IS_ERR(priv->peri_ctrl)) + priv->peri_ctrl = NULL; + + priv->phy = devm_phy_create(dev, &hix5hd2_sata_phy_ops, NULL); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(priv->phy); + } + + phy_set_drvdata(priv->phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + return 0; +} + +static const struct of_device_id hix5hd2_sata_phy_of_match[] = { + {.compatible = "hisilicon,hix5hd2-sata-phy",}, + { }, +}; +MODULE_DEVICE_TABLE(of, hix5hd2_sata_phy_of_match); + +static struct platform_driver hix5hd2_sata_phy_driver = { + .probe = hix5hd2_sata_phy_probe, + .driver = { + .name = "hix5hd2-sata-phy", + .owner = THIS_MODULE, + .of_match_table = hix5hd2_sata_phy_of_match, + } +}; +module_platform_driver(hix5hd2_sata_phy_driver); + +MODULE_AUTHOR("Jiancheng Xue "); +MODULE_DESCRIPTION("HISILICON HIX5HD2 SATA PHY driver"); +MODULE_ALIAS("platform:hix5hd2-sata-phy"); +MODULE_LICENSE("GPL v2"); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/