Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 19 Nov 2002 12:01:59 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 19 Nov 2002 12:01:59 -0500 Received: from paiol.terra.com.br ([200.176.3.18]:46490 "EHLO paiol.terra.com.br") by vger.kernel.org with ESMTP id ; Tue, 19 Nov 2002 12:00:31 -0500 Date: Tue, 19 Nov 2002 15:07:30 -0200 From: Lucio Maciel To: LKML Cc: delphus@delphus.org Subject: SCSI problem Message-Id: <20021119150730.05380a0b.abslucio@terra.com.br> Organization: absoluta X-Mailer: Sylpheed version 0.8.5 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5506 Lines: 126 Hello... Here goes some SCSI problens report by a friend... Please CC to delphus@delphus.org any reply my drive: Sony SDT-9000(PB) my tape: DDS3 sony 125P 12.0GB my distro: slackware 8.1 my kernel: 2.4.19 my scsi0 device: my mt-st version: 0.7 my GNU mt version: 2.4.2.91 add info. from lspci -vv 02:0a.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01) Subsystem: Adaptec AHA-2940UW SCSI Host Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- dmesg info. scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs Vendor: SONY Model: SDT-9000 Rev: 0600 Type: Sequential-Access ANSI SCSI revision: 02 st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16 Attached scsi tape st0 at scsi0, channel 0, id 0, lun 0 st: Allocated tape buffer 0 (32768 bytes, 1 segments, dma: 1, a: c0090000). st: segment sizes: first 32768, last 32768 bytes. my ps -lax F UID PID PPID PRI NI VSZ RSS WCHAN STAT TTY TIME COMMAND 000 0 506 162 9 0 1276 268 st_do_ D vc/2 0:00 mt -f /dev/st0 erase debug information with #define DEBUG 1 st0: Block limits 1 - 16777215 bytes. st0: Mode sense. Length 11, medium 0, WBS 10, BLL 8 st0: Density 25, tape length: 0, drv buffer: 1 st0: Block size: 0, buffer size: 32768 (1 blocks). st0: Erasing tape. st0: Device already in use. st0: Error: 8000002, cmd: 19 1 0 0 0 0 Len: 0 Current st09:00: sense key Medium Error Additional sense indicates Write error st0: Rewinding tape. st0: Block limits 1 - 16777215 bytes. st0: Mode sense. Length 11, medium 0, WBS 10, BLL 8 st0: Density 25, tape length: 0, drv buffer: 1 st0: Block size: 0, buffer size: 32768 (1 blocks). st0: Erasing tape. Nov 19 23:38:18 magali kernel: st0: Mode sense. Length 11, medium 0, WBS 10, BLL 8 Nov 19 23:38:18 magali kernel: st0: Density 25, tape length: 0, drv buffer: 1 Nov 19 23:38:18 magali kernel: st0: Block size: 0, buffer size: 32768 (1 blocks). Nov 19 23:38:18 magali kernel: st0: Erasing tape. Nov 19 23:40:48 magali kernel: st0: Device already in use. Nov 19 23:42:19 magali gnome-name-server[257]: starting Nov 19 23:42:19 magali gnome-name-server[257]: name server starting Nov 19 23:56:40 magali -- MARK -- Nov 19 23:57:28 magali gpm[106]: imps2: Auto-detected intellimouse PS/2 Nov 19 23:58:30 magali gpm[106]: imps2: Auto-detected intellimouse PS/2 Nov 20 00:10:41 magali gpm[106]: imps2: Auto-detected intellimouse PS/2 Nov 20 00:13:41 magali gpm[106]: imps2: Auto-detected intellimouse PS/2 Nov 20 01:16:22 magali -- MARK -- Nov 20 01:29:26 magali gpm[106]: imps2: Auto-detected intellimouse PS/2 Nov 20 01:31:43 magali kernel: st0: Error: 8000002, cmd: 19 1 0 0 0 0 Len: 0 Nov 20 01:31:43 magali kernel: st0: Rewinding tape. Nov 20 01:34:41 magali kernel: st0: Mode sense. Length 11, medium 0, WBS 10, BLL 8 Nov 20 01:34:41 magali kernel: st0: Density 25, tape length: 0, drv buffer: 1 Nov 20 01:34:41 magali kernel: st0: Block size: 0, buffer size: 32768 (1 blocks). Nov 20 01:34:41 magali kernel: st0: Erasing tape. Nov 20 01:56:22 magali -- MARK -- Nov 20 02:09:05 magali gpm[106]: imps2: Auto-detected intellimouse PS/2 Nov 20 02:36:22 magali -- MARK -- Nov 20 02:56:22 magali -- MARK -- Nov 20 03:16:22 magali -- MARK -- Nov 20 03:36:22 magali -- MARK -- Nov 20 03:56:22 magali -- MARK -- Nov 20 04:16:22 magali -- MARK -- Nov 20 04:36:22 magali -- MARK -- Nov 20 04:56:22 magali -- MARK -- Nov 20 05:16:22 magali -- MARK -- ... and still erasing tape... (I didn't cut any line from my messages just for you to see that it was not modified) So what is going on, or wrong. Simple all mt commands works just fine, but erase. The command erase hangs the driver and mt command for all the long timeout setting, after that right time, backs an error above. I don't know what to do anymore. But I cannot figure out why it worked just fine when my system was runnind a slackware 8.0 with 0.6 mt version and kernel 2.4.5. That system was working just pretty fine. I got to upgrade to slackware 8.1 with some new versions. I've tried to back mt version to 0.6, no progress. I've not tried to back to kernel 2.4.5, but if this will be my only chance to get this working fine again... Please help me, I'm stucked. PS.: CC to delphus@delphus.org any reply, he is the "owner" of this problem.. heh best regards -- ::: Lucio F. Maciel ::: abslucio@terra.com.br ::: icq 93065464 ::: Absoluta.net - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/