Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934029AbaFRGQn (ORCPT ); Wed, 18 Jun 2014 02:16:43 -0400 Received: from mail-oa0-f74.google.com ([209.85.219.74]:33591 "EHLO mail-oa0-f74.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756666AbaFRGQh (ORCPT ); Wed, 18 Jun 2014 02:16:37 -0400 From: Andrew Bresticker To: devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Randy Dunlap , Stephen Warren , Thierry Reding , Russell King , Linus Walleij , Greg Kroah-Hartman , Mathias Nyman , Grant Likely , Alan Stern , Kishon Vijay Abraham I , Arnd Bergmann , Andrew Bresticker Subject: [PATCH v1 3/9] of: Update Tegra XUSB pad controller binding for USB Date: Tue, 17 Jun 2014 23:16:14 -0700 Message-Id: <1403072180-4944-4-git-send-email-abrestic@chromium.org> X-Mailer: git-send-email 2.0.0.526.g5318336 In-Reply-To: <1403072180-4944-1-git-send-email-abrestic@chromium.org> References: <1403072180-4944-1-git-send-email-abrestic@chromium.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add new bindings used for USB support by the Tegra XUSB pad controller. This includes additional PHY types, USB-specific pinconfig properties, etc. Signed-off-by: Andrew Bresticker --- .../pinctrl/nvidia,tegra124-xusb-padctl.txt | 53 ++++++++++++++++++++-- include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h | 7 +++ 2 files changed, 56 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt index 2f9c0bd..6181019 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -21,6 +21,12 @@ Required properties: - padctl - #phy-cells: Should be 1. The specifier is the index of the PHY to reference. See for the list of valid values. +- nvidia,xusb-mbox: Handle to the Tegra XUSB mailbox node. + +Optional properties: +------------------- +- vbus-otg-{0,1,2}-supply: VBUS regulator for the corresponding UTMI pad. +- vddio-hsic-supply: VDDIO regulator for the HSIC pads. Lane muxing: ------------ @@ -50,6 +56,16 @@ Optional properties: pin or group should be assigned to. Valid values for function names are listed below. - nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes) +- nvidia,usb3-port-num: USB3 port (0 or 1) to which the lane is mapped. +- nvidia,usb2-port-num: USB2 port (0, 1, or 2) to which the lane is mapped. +- nvidia,hsic-strobe-trim: HSIC strobe trimmer value. +- nvidia,hsic-rx-strobe-trim: HSIC RX strobe trimmer value. +- nvidia,hsic-rx-data-trim: HSIC RX data trimmer value. +- nvidia,hsic-tx-rtune-n: HSIC TX RTUNEN value. +- nvidia,hsic-tx-rtune-p: HSIC TX RTUNEP value. +- nvidia,hsic-tx-slew-n: HSIC TX SLEWN value. +- nvidia,hsic-tx-slew-p: HSIC TX SLEWP value. +- nvidia,hsic-auto-term: Enables HSIC AUTO_TERM. (0: no, 1: yes) Note that not all of these properties are valid for all lanes. Lanes can be divided into three groups: @@ -58,18 +74,25 @@ divided into three groups: Valid functions for this group are: "snps", "xusb", "uart", "rsvd". - The nvidia,iddq property does not apply to this group. + The nvidia,iddq, nvidia,usb3-port-num, nvidia,usb2-port-num, and + nvidia,hsic-* properties do not apply to this group. - ulpi-0, hsic-0, hsic-1: Valid functions for this group are: "snps", "xusb". - The nvidia,iddq property does not apply to this group. + The nvidia,iddq, nvidia,usb3-port-num, and nvidia,usb2-port-num + properties do not apply to this group. The nvidia,hsic-* properties + apply only to the pins hsic-{0,1} when the function is xusb. - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0: Valid functions for this group are: "pcie", "usb3", "sata", "rsvd". + The nvidia,usb3-port-num and nvidia,usb2-port-num properties only + apply and are required when the function is usb3. The nvidia,hsic-* + properties do not apply to this group. + Example: ======== @@ -83,6 +106,8 @@ SoC file extract: resets = <&tegra_car 142>; reset-names = "padctl"; + nvidia,xusb-mbox = <&mbox>; + #phy-cells = <1>; }; @@ -100,15 +125,35 @@ Board file extract: ... + usb@0,70090000 { + ... + + phys = <&padctl 5>, <&padctl 6>, <&padctl 7>; + phy-names = "utmi-1", "utmi-2", "usb3-0"; + + ... + } + + ... + padctl: padctl@0,7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; + vbus-otg-2-supply = <&vdd_usb3_vbus>; + padctl_default: pinmux { - usb3 { - nvidia,lanes = "pcie-0", "pcie-1"; + otg { + nvidia,lanes = "otg-1", "otg-2"; + nvidia,function = "xusb"; + }; + + usb3p0 { + nvidia,lanes = "pcie-0"; nvidia,function = "usb3"; nvidia,iddq = <0>; + nvidia,usb3-port-num = <0>; + nvidia,usb2-port-num = <2>; }; pcie { diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h b/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h index 914d56d..c83a4d4 100644 --- a/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h +++ b/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h @@ -3,5 +3,12 @@ #define TEGRA_XUSB_PADCTL_PCIE 0 #define TEGRA_XUSB_PADCTL_SATA 1 +#define TEGRA_XUSB_PADCTL_USB3_P0 2 +#define TEGRA_XUSB_PADCTL_USB3_P1 3 +#define TEGRA_XUSB_PADCTL_UTMI_P0 4 +#define TEGRA_XUSB_PADCTL_UTMI_P1 5 +#define TEGRA_XUSB_PADCTL_UTMI_P2 6 +#define TEGRA_XUSB_PADCTL_HSIC_P0 7 +#define TEGRA_XUSB_PADCTL_HSIC_P1 8 #endif /* _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H */ -- 2.0.0.526.g5318336 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/