Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752754AbaFWKGB (ORCPT ); Mon, 23 Jun 2014 06:06:01 -0400 Received: from s3.sipsolutions.net ([5.9.151.49]:45342 "EHLO sipsolutions.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751389AbaFWKGA (ORCPT ); Mon, 23 Jun 2014 06:06:00 -0400 Message-ID: <1403517938.4418.16.camel@jlt4.sipsolutions.net> Subject: Re: [PATCH 2/2] cfg80211: Use 5MHz bandwidth by default when checking usable channels From: Johannes Berg To: Felix Fietkau Cc: Rostislav Lisovy , "John W. Linville" , linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org, Michal Sojka , s.sander@nordsys.de, jan-niklas.meier@volkswagen.de, Rostislav Lisovy Date: Mon, 23 Jun 2014 12:05:38 +0200 In-Reply-To: <53A7FBB2.2050703@openwrt.org> References: <1397565476-4348-1-git-send-email-rostislav.lisovy@fel.cvut.cz> <1397565476-4348-3-git-send-email-rostislav.lisovy@fel.cvut.cz> <53A6C0FF.9090104@openwrt.org> <1403514536.4418.6.camel@jlt4.sipsolutions.net> <53A7FBB2.2050703@openwrt.org> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.12.2-1 Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, 2014-06-23 at 12:04 +0200, Felix Fietkau wrote: > On 2014-06-23 11:08, Johannes Berg wrote: > > On Sun, 2014-06-22 at 13:41 +0200, Felix Fietkau wrote: > >> On 2014-04-15 14:37, Rostislav Lisovy wrote: > >> > Current code checks if the 20MHz bandwidth is allowed for > >> > particular channel -- if it is not, the channel is disabled. > >> > Since we need to use 5/10 MHz channels, this code is modified in > >> > the way that the default bandwidth to check is 5MHz. If the > >> > maximum bandwidth allowed by the channel is smaller than 5MHz, > >> > the channel is disabled. Otherwise the channel is used and the > >> > flags are set according to the bandwidth allowed by the channel. > >> > > >> > Signed-off-by: Rostislav Lisovy > > > >> This change causes a regression and needs to be reverted or fixed. > > > > Noted, I've reverted it in mac80211.git. > > > >> It leaves Channel 12 enabled for US regdomain and does not prevent > >> bringing up AP mode on it (IEEE80211_CHAN_NO_20MHZ does not get set). > > > > I'm not sure this makes sense - CHAN_NO_20MHZ shouldn't get set on that > > channel? It should be disabled for other reasons for AP mode - e.g. > > NO_IR. > I was thinking it could be valid in AP mode for 5 MHz operation. Huh, ok, maybe. I guess Rostislav can look into the details :) johannes -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/