Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753288AbaFXMB0 (ORCPT ); Tue, 24 Jun 2014 08:01:26 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:56607 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752081AbaFXMBY (ORCPT ); Tue, 24 Jun 2014 08:01:24 -0400 Message-ID: <53A9685E.9090501@ti.com> Date: Tue, 24 Jun 2014 17:30:30 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.3.0 MIME-Version: 1.0 To: =?UTF-8?B?QW50b2luZSBUw6luYXJ0?= , , CC: , , , , , , , , Lee Jones , Sergei Shtylyov Subject: Re: [PATCH v6 1/7] phy: add a driver for the Berlin SATA PHY References: <1402914392-6028-1-git-send-email-antoine.tenart@free-electrons.com> <1402914392-6028-2-git-send-email-antoine.tenart@free-electrons.com> In-Reply-To: <1402914392-6028-2-git-send-email-antoine.tenart@free-electrons.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, On Monday 16 June 2014 03:56 PM, Antoine Ténart wrote: > The Berlin SoC has a two SATA ports. Add a PHY driver to handle them. > > The mode selection can let us think this PHY can be configured to fit > other purposes. But there are reasons to think the SATA mode will be > the only one usable: the PHY registers are only accessible indirectly > through two registers in the SATA range, the PHY seems to be integrated > and no information tells us the contrary. For these reasons, make the > driver a SATA PHY driver. > > Signed-off-by: Antoine Ténart > --- > drivers/phy/Kconfig | 7 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-berlin-sata.c | 232 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 240 insertions(+) > create mode 100644 drivers/phy/phy-berlin-sata.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 16a2f067c242..365ad3651e1c 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -15,6 +15,13 @@ config GENERIC_PHY > phy users can obtain reference to the PHY. All the users of this > framework should select this config. > > +config PHY_BERLIN_SATA > + tristate "Marvell Berlin SATA PHY driver" > + depends on ARCH_BERLIN && OF > + select GENERIC_PHY > + help > + Enable this to support the SATA PHY on Marvell Berlin SoCs. > + > config PHY_EXYNOS_MIPI_VIDEO > tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > depends on HAS_IOMEM > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index b4f1d5770601..a137a2e23218 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -3,6 +3,7 @@ > # > > obj-$(CONFIG_GENERIC_PHY) += phy-core.o > +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c > new file mode 100644 > index 000000000000..907897a02672 > --- /dev/null > +++ b/drivers/phy/phy-berlin-sata.c > @@ -0,0 +1,232 @@ > +/* > + * Marvell Berlin SATA PHY driver > + * > + * Copyright (C) 2014 Marvell Technology Group Ltd. > + * > + * Antoine Ténart > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +#include > +#include > +#include > +#include > + > +#define HOST_VSA_ADDR 0x0 > +#define HOST_VSA_DATA 0x4 > +#define PORT_VSR_ADDR 0x78 > +#define PORT_VSR_DATA 0x7c > +#define PORT_SCR_CTL 0x2c > + > +#define CONTROL_REGISTER 0x0 > +#define MBUS_SIZE_CONTROL 0x4 > + > +#define POWER_DOWN_PHY0 BIT(6) > +#define POWER_DOWN_PHY1 BIT(14) > +#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16) > +#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19) > + > +#define PHY_BASE 0x200 > + > +/* register 0x01 */ > +#define REF_FREF_SEL_25 BIT(0) > +#define PHY_MODE_SATA (0x0 << 5) > + > +/* register 0x02 */ > +#define USE_MAX_PLL_RATE BIT(12) > + > +/* register 0x23 */ > +#define DATA_BIT_WIDTH_10 (0x0 << 10) > +#define DATA_BIT_WIDTH_20 (0x1 << 10) > +#define DATA_BIT_WIDTH_40 (0x2 << 10) > + > +/* register 0x25 */ > +#define PHY_GEN_MAX_1_5 (0x0 << 10) > +#define PHY_GEN_MAX_3_0 (0x1 << 10) > +#define PHY_GEN_MAX_6_0 (0x2 << 10) > + > +#define BERLIN_SATA_PHY_NB 2 multi-phy PHY providers should be modelled so that each individual PHY is made as sub-node of the PHY provider. Please refer [1] for the discussion on this. [1] -> https://lkml.org/lkml/2014/6/24/131 Thanks Kishon > + > +#define to_berlin_sata_phy_priv(desc) \ > + container_of((desc), struct phy_berlin_priv, phys[(desc)->index]) > + > +struct phy_berlin_desc { > + struct phy *phy; > + u32 val; > + unsigned index; > +}; > + > +struct phy_berlin_priv { > + void __iomem *base; > + spinlock_t lock; > + struct phy_berlin_desc phys[BERLIN_SATA_PHY_NB]; > +}; > + > +static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg, u32 reg, > + u32 mask, u32 val) > +{ > + u32 regval; > + > + /* select register */ > + writel(PHY_BASE + reg, ctrl_reg + PORT_VSR_ADDR); > + > + /* set bits */ > + regval = readl(ctrl_reg + PORT_VSR_DATA); > + regval &= ~mask; > + regval |= val; > + writel(regval, ctrl_reg + PORT_VSR_DATA); > +} > + > +static int phy_berlin_sata_power_on(struct phy *phy) > +{ > + struct phy_berlin_desc *desc = phy_get_drvdata(phy); > + struct phy_berlin_priv *priv = to_berlin_sata_phy_priv(desc); > + void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80); > + int ret = 0; > + u32 regval; > + > + spin_lock(&priv->lock); > + > + /* Power on PHY */ > + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR); > + regval = readl(priv->base + HOST_VSA_DATA); > + regval &= ~(desc->val); > + writel(regval, priv->base + HOST_VSA_DATA); > + > + /* Configure MBus */ > + writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR); > + regval = readl(priv->base + HOST_VSA_DATA); > + regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128; > + writel(regval, priv->base + HOST_VSA_DATA); > + > + /* set PHY mode and ref freq to 25 MHz */ > + phy_berlin_sata_reg_setbits(ctrl_reg, 0x1, 0xff, > + REF_FREF_SEL_25 | PHY_MODE_SATA); > + > + /* set PHY up to 6 Gbps */ > + phy_berlin_sata_reg_setbits(ctrl_reg, 0x25, 0xc00, PHY_GEN_MAX_6_0); > + > + /* set 40 bits width */ > + phy_berlin_sata_reg_setbits(ctrl_reg, 0x23, 0xc00, DATA_BIT_WIDTH_40); > + > + /* use max pll rate */ > + phy_berlin_sata_reg_setbits(ctrl_reg, 0x2, 0x0, USE_MAX_PLL_RATE); > + > + /* set the controller speed */ > + writel(0x31, ctrl_reg + PORT_SCR_CTL); > + > + spin_unlock(&priv->lock); > + > + return ret; > +} > + > +static int phy_berlin_sata_power_off(struct phy *phy) > +{ > + struct phy_berlin_desc *desc = phy_get_drvdata(phy); > + struct phy_berlin_priv *priv = to_berlin_sata_phy_priv(desc); > + u32 regval; > + > + spin_lock(&priv->lock); > + > + /* Power down PHY */ > + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR); > + regval = readl(priv->base + HOST_VSA_DATA); > + regval |= desc->val; > + writel(regval, priv->base + HOST_VSA_DATA); > + > + spin_unlock(&priv->lock); > + > + return 0; > +} > + > +static struct phy *phy_berlin_sata_phy_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct phy_berlin_priv *priv = dev_get_drvdata(dev); > + > + if (WARN_ON(args->args[0] >= BERLIN_SATA_PHY_NB)) > + return ERR_PTR(-ENODEV); > + > + return priv->phys[args->args[0]].phy; > +} > + > +static struct phy_ops phy_berlin_sata_ops = { > + .power_on = phy_berlin_sata_power_on, > + .power_off = phy_berlin_sata_power_off, > + .owner = THIS_MODULE, > +}; > + > +static u32 phy_berlin_power_down_bits[] = { > + POWER_DOWN_PHY0, > + POWER_DOWN_PHY1, > +}; > + > +static int phy_berlin_sata_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct phy *phy; > + struct phy_provider *phy_provider; > + struct phy_berlin_priv *priv; > + struct resource *res; > + int i; > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) > + return -EINVAL; > + > + priv->base = devm_ioremap(dev, res->start, resource_size(res)); > + if (!priv->base) > + return -ENOMEM; > + > + dev_set_drvdata(dev, priv); > + spin_lock_init(&priv->lock); > + > + for (i = 0; i < BERLIN_SATA_PHY_NB; i++) { > + phy = devm_phy_create(dev, &phy_berlin_sata_ops, NULL); > + if (IS_ERR(phy)) { > + dev_err(dev, "failed to create PHY %d\n", i); > + return PTR_ERR(phy); > + } > + > + priv->phys[i].phy = phy; > + priv->phys[i].val = phy_berlin_power_down_bits[i]; > + priv->phys[i].index = i; > + phy_set_drvdata(phy, &priv->phys[i]); > + > + /* Make sure the PHY is off */ > + phy_berlin_sata_power_off(phy); > + } > + > + phy_provider = > + devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate); > + if (IS_ERR(phy_provider)) > + return PTR_ERR(phy_provider); > + > + return 0; > +} > + > +static const struct of_device_id phy_berlin_sata_of_match[] = { > + { .compatible = "marvell,berlin-sata-phy" }, > + { }, > +}; > + > +static struct platform_driver phy_berlin_sata_driver = { > + .probe = phy_berlin_sata_probe, > + .driver = { > + .name = "phy-berlin-sata", > + .owner = THIS_MODULE, > + .of_match_table = phy_berlin_sata_of_match, > + }, > +}; > +module_platform_driver(phy_berlin_sata_driver); > + > +MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver"); > +MODULE_AUTHOR("Antoine Ténart "); > +MODULE_LICENSE("GPL v2"); > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/