Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965018AbaFZSRN (ORCPT ); Thu, 26 Jun 2014 14:17:13 -0400 Received: from bhuna.collabora.co.uk ([93.93.135.160]:33425 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964998AbaFZSRJ (ORCPT ); Thu, 26 Jun 2014 14:17:09 -0400 From: Javier Martinez Canillas To: Lee Jones Cc: Samuel Ortiz , Mark Brown , Mike Turquette , Liam Girdwood , Alessandro Zummo , Kukjin Kim , Doug Anderson , Olof Johansson , Sjoerd Simons , Daniel Stone , Tomeu Vizoso , Krzysztof Kozlowski , Yadwinder Singh Brar , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH v5 14/14] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Date: Thu, 26 Jun 2014 20:15:46 +0200 Message-Id: <1403806546-31122-15-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.0.0.rc2 In-Reply-To: <1403806546-31122-1-git-send-email-javier.martinez@collabora.co.uk> References: <1403806546-31122-1-git-send-email-javier.martinez@collabora.co.uk> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Peach pit and pi boards uses a Maxim 77802 power management IC to drive regulators and its Real Time Clock. This patch adds support for this chip. These are the device nodes and pinctrl configuration that are present on the Peach pit DeviceTree source file in the the Chrome OS kernel 3.8 tree. Signed-off-by: Javier Martinez Canillas Tested-by: Naveen Krishna Chatradhi --- Changes since v4: None Changes since v3: - Add support for Exynos5800 based Peach pi board. Suggested by Doug Anderson. - Model the actual regulators relationship instead of a simplistic model. Suggested by Mark Brown. Changes since v2: None Changes since v1: - Use "regulators" for child node instead of "voltage-regulators" to be consistent with other PMIC. Suggested by Mark Brown. - Use regulators node names instead of the deprecated "regulator-compatible" property. Suggested by Mark Brown. arch/arm/boot/dts/exynos5420-peach-pit.dts | 343 +++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos5800-peach-pi.dts | 343 +++++++++++++++++++++++++++++ 2 files changed, 686 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index b2f1237..d124394 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -143,6 +143,311 @@ ddc = <&i2c_2>; }; +&hsi2c_4 { + status = "okay"; + clock-frequency = <400000>; + + max77802-pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + /* Using idx 1 means warm reset will get good voltage */ + max77802,pmic-buck-default-dvs-idx = <1>; + max77802,pmic-buck-dvs-gpios = <&gpy7 6 GPIO_ACTIVE_HIGH>, + <&gpj4 2 GPIO_ACTIVE_HIGH>, + <&gpj4 3 GPIO_ACTIVE_HIGH>; + max77802,pmic-buck-selb-gpios = <&gph0 2 GPIO_ACTIVE_HIGH>, + <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>, + <&gph0 5 GPIO_ACTIVE_HIGH>, + <&gph0 6 GPIO_ACTIVE_HIGH>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck2_reg: BUCK2 { + regulator-name = "vdd_arm_real"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck3_reg: BUCK3 { + regulator-name = "vdd_int_real"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck5_reg: BUCK5 { + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck7_reg: BUCK7 { + regulator-name = "vdd_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + buck8_reg: BUCK8 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + buck9_reg: BUCK9 { + regulator-name = "vdd_2v"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-boot-on; + }; + buck10_reg: BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + ldo2_reg: LDO2 { + regulator-name = "vdd_1v2_2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + ldo3_reg: LDO3 { + regulator-name = "vdd_1v8_3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vqmmc_sdcard: ldo4_reg: LDO4 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + + }; + ldo5_reg: LDO5 { + regulator-name = "vdd_1v8_5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo6_reg: LDO6 { + regulator-name = "vdd_1v8_6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo7_reg: LDO7 { + regulator-name = "vdd_1v8_7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + ldo17_reg: LDO17 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + ldo18_reg: LDO18 { + regulator-name = "ldo_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo19_reg: LDO19 { + regulator-name = "ldo_19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo20_reg: LDO20 { + regulator-name = "ldo_20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo21_reg: LDO21 { + regulator-name = "ldo_21"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + ldo23_reg: LDO23 { + regulator-name = "ld0_23"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo24_reg: LDO24 { + regulator-name = "ldo_24"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + ldo25_reg: LDO25 { + regulator-name = "ldo_25"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo26_reg: LDO26 { + regulator-name = "ldo_26"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + ldo27_reg: LDO27 { + regulator-name = "ldo_27"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + ldo28_reg: LDO28 { + regulator-name = "ldo_28"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo29_reg: LDO29 { + regulator-name = "ldo_29"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo30_reg: LDO30 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + ldo32_reg: LDO32 { + regulator-name = "ldo_32"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + ldo33_reg: LDO33 { + regulator-name = "ldo_33"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + ldo34_reg: LDO34 { + regulator-name = "ldo_34"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + ldo35_reg: LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + inl2-supply = <&buck7_reg>; + }; + }; + }; +}; + &hsi2c_7 { status = "okay"; @@ -264,12 +569,42 @@ samsung,pin-drv = <0>; }; + max77802_irq: max77802-irq { + samsung,pins = "gpx3-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpy7-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpj4-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpj4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &pinctrl_3 { @@ -299,6 +634,14 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + pmic_selb: pmic-selb { + samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", + "gph0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 5c60bbe..c36c9ce 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -141,6 +141,311 @@ ddc = <&i2c_2>; }; +&hsi2c_4 { + status = "okay"; + clock-frequency = <400000>; + + max77802-pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + /* Using idx 1 means warm reset will get good voltage */ + max77802,pmic-buck-default-dvs-idx = <1>; + max77802,pmic-buck-dvs-gpios = <&gpy7 6 GPIO_ACTIVE_HIGH>, + <&gpj4 2 GPIO_ACTIVE_HIGH>, + <&gpj4 3 GPIO_ACTIVE_HIGH>; + max77802,pmic-buck-selb-gpios = <&gph0 2 GPIO_ACTIVE_HIGH>, + <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>, + <&gph0 5 GPIO_ACTIVE_HIGH>, + <&gph0 6 GPIO_ACTIVE_HIGH>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck2_reg: BUCK2 { + regulator-name = "vdd_arm_real"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck3_reg: BUCK3 { + regulator-name = "vdd_int_real"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck5_reg: BUCK5 { + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + buck7_reg: BUCK7 { + regulator-name = "vdd_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + buck8_reg: BUCK8 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + buck9_reg: BUCK9 { + regulator-name = "vdd_2v"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-boot-on; + }; + buck10_reg: BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + ldo2_reg: LDO2 { + regulator-name = "vdd_1v2_2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + ldo3_reg: LDO3 { + regulator-name = "vdd_1v8_3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vqmmc_sdcard: ldo4_reg: LDO4 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + + }; + ldo5_reg: LDO5 { + regulator-name = "vdd_1v8_5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo6_reg: LDO6 { + regulator-name = "vdd_1v8_6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo7_reg: LDO7 { + regulator-name = "vdd_1v8_7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + ldo17_reg: LDO17 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + ldo18_reg: LDO18 { + regulator-name = "ldo_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo19_reg: LDO19 { + regulator-name = "ldo_19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo20_reg: LDO20 { + regulator-name = "ldo_20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo21_reg: LDO21 { + regulator-name = "ldo_21"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + ldo23_reg: LDO23 { + regulator-name = "ld0_23"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo24_reg: LDO24 { + regulator-name = "ldo_24"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + ldo25_reg: LDO25 { + regulator-name = "ldo_25"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo26_reg: LDO26 { + regulator-name = "ldo_26"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + ldo27_reg: LDO27 { + regulator-name = "ldo_27"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + ldo28_reg: LDO28 { + regulator-name = "ldo_28"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo29_reg: LDO29 { + regulator-name = "ldo_29"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo30_reg: LDO30 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + ldo32_reg: LDO32 { + regulator-name = "ldo_32"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + ldo33_reg: LDO33 { + regulator-name = "ldo_33"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + ldo34_reg: LDO34 { + regulator-name = "ldo_34"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + ldo35_reg: LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + inl2-supply = <&buck7_reg>; + }; + }; + }; +}; + &hsi2c_7 { status = "okay"; @@ -262,12 +567,42 @@ samsung,pin-drv = <0>; }; + max77802_irq: max77802-irq { + samsung,pins = "gpx3-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpy7-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpj4-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpj4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &pinctrl_3 { @@ -297,6 +632,14 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + pmic_selb: pmic-selb { + samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", + "gph0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { -- 2.0.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/