From: Chanwoo Choi <cw00.choi@samsung.com>
To: jic23@kernel.org, ch.naveen@samsung.com, t.figa@samsung.com,
        kgene.kim@samsung.com
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
        ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
        rdunlap@infradead.org, sachin.kamat@linaro.org,
        kyungmin.park@samsung.com, linux-iio@vger.kernel.org,
        linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCHv5 3/4] iio: devicetree: Add DT binding documentation for
 Exynos3250 ADC
Date: Fri, 27 Jun 2014 13:30:05 +0900
Message-id: <1403843406-28229-4-git-send-email-cw00.choi@samsung.com>
In-reply-to: <1403843406-28229-1-git-send-email-cw00.choi@samsung.com>
References: <1403843406-28229-1-git-send-email-cw00.choi@samsung.com>
DLP-Filter: Pass
Sender: linux-kernel-owner@vger.kernel.org

This patch add DT binding documentation for Exynos3250 ADC IP. Exynos3250 has
special clock ('sclk_adc') for ADC which provide clock to internal ADC.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
---
 .../devicetree/bindings/arm/samsung/exynos-adc.txt | 26 ++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index 5d49f2b..b87749a 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -14,14 +14,22 @@ Required properties:
 				for exynos4412/5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
+			Must be "samsung,exynos3250-adc-v2" for
+				for controllers compatible with ADC of
+				Exynos3250.
 - reg:			Contains ADC register address range (base address and
 			length) and the address of the phy enable register.
 - interrupts: 		Contains the interrupt information for the timer. The
 			format is being dependent on which interrupt controller
 			the Samsung device uses.
 - #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks		From common clock binding: handle to adc clock.
-- clock-names		From common clock binding: Shall be "adc".
+- clocks		From common clock bindings: handles to clocks specified
+			in "clock-names" property, in the same order.
+- clock-names		From common clock bindings: list of clock input names
+			used by ADC block:
+			- "adc" : ADC bus clock
+			- "sclk_adc" : ADC special clock (only for Exynos3250
+				       and compatible ADC block)
 - vdd-supply		VDD input supply.
 
 Note: child nodes can be added for auto probing from device tree.
@@ -41,6 +49,20 @@ adc: adc@12D10000 {
 	vdd-supply = <&buck5_reg>;
 };
 
+Example: adding device info in dtsi file for Exynos3250 with additional sclk
+
+adc: adc@126C0000 {
+	compatible = "samsung,exynos3250-adc-v2";
+	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	interrupts = <0 137 0>;
+	#io-channel-cells = <1>;
+	io-channel-ranges;
+
+	clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+	clock-names = "adc", "sclk_adc";
+
+	vdd-supply = <&buck5_reg>;
+};
 
 Example: Adding child nodes in dts file
 
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/