Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755874AbaF3QjF (ORCPT ); Mon, 30 Jun 2014 12:39:05 -0400 Received: from ns.gsystem.sk ([62.176.172.50]:44073 "EHLO ns.gsystem.sk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754201AbaF3Qiz (ORCPT ); Mon, 30 Jun 2014 12:38:55 -0400 From: Ondrej Zary To: Samuel Chessman Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 09/11] tlan: Don't disable internal PHY on cards that use it in 10 Mbps mode Date: Mon, 30 Jun 2014 18:38:35 +0200 Message-Id: <1404146317-3094-10-git-send-email-linux@rainbow-software.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1404146317-3094-1-git-send-email-linux@rainbow-software.org> References: <1404146317-3094-1-git-send-email-linux@rainbow-software.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org In tlan_reset_adapter, we disable internal PHY when an external one is used. On cards which use internal PHY in 10 Mbps mode, we enable it later when setting 10 Mbps mode but it does not really work (PHY fails to reset). Leave it enabled instead. Signed-off-by: Ondrej Zary --- drivers/net/ethernet/ti/tlan.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 1f878b9..bb805c2 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -2238,7 +2238,9 @@ tlan_reset_adapter(struct net_device *dev) } } - if (priv->phy_num == 0) + /* don't power down internal PHY if we're going to use it */ + if (priv->phy_num == 0 || + (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10)) data |= TLAN_NET_CFG_PHY_EN; tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data); @@ -2689,7 +2691,6 @@ static void tlan_phy_finish_auto_neg(struct net_device *dev) struct tlan_priv *priv = netdev_priv(dev); u16 an_adv; u16 an_lpa; - u16 data; u16 mode; u16 phy; u16 status; @@ -2722,9 +2723,6 @@ static void tlan_phy_finish_auto_neg(struct net_device *dev) (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) && (priv->phy_num != 0)) { priv->phy_num = 0; - data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN - | TLAN_NET_CFG_PHY_EN; - tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data); tlan_set_timer(dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN); return; } -- Ondrej Zary -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/