Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752355AbaGBMWb (ORCPT ); Wed, 2 Jul 2014 08:22:31 -0400 Received: from gnurou.org ([207.192.72.5]:55650 "EHLO mail.gnurou.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751226AbaGBMW2 (ORCPT ); Wed, 2 Jul 2014 08:22:28 -0400 From: Alexandre Courbot To: Thierry Reding , Terje Bergstrom , Stephen Warren Cc: linux-tegra@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, Alexandre Courbot Subject: [PATCH 0/4] drm/dsi/tegra: continuous clock support Date: Wed, 2 Jul 2014 21:19:16 +0900 Message-Id: <1404303560-32209-1-git-send-email-acourbot@nvidia.com> X-Mailer: git-send-email 2.0.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This small series adds support for DSI continuous clock as required by the DSI specification and as needed for NVIDIA SHIELD's panel. Continuous clock mode can be specified as the flags of a DSI device, and host drivers can check this flag to adapt their behavior. The flag is then added to the panel embedded in NVIDIA SHIELD, which allows us to finally enable the panel in its device tree. Alexandre Courbot (4): drm/dsi: Add flag for continuous clock behavior drm/tegra: dsi - Handle continuous clock flag drm/panel: LG LH500WX1-SD03 uses continuous clock ARM: tegra: roth: add display DT node arch/arm/boot/dts/tegra114-roth.dts | 23 ++++++++++++++++++++--- drivers/gpu/drm/panel/panel-simple.c | 2 +- drivers/gpu/drm/tegra/dsi.c | 3 ++- include/drm/drm_mipi_dsi.h | 2 ++ 4 files changed, 25 insertions(+), 5 deletions(-) -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/