Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758798AbaGCOVb (ORCPT ); Thu, 3 Jul 2014 10:21:31 -0400 Received: from top.free-electrons.com ([176.31.233.9]:51001 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1758669AbaGCOUq (ORCPT ); Thu, 3 Jul 2014 10:20:46 -0400 From: Maxime Ripard To: linux@maxim.org.za, Nicolas Ferre , Jean-Christophe Plagniol-Villard , dwmw2@infradead.org, dbaryshkov@gmail.com Cc: Boris Brezillon , Alexandre Belloni , Thomas Petazzoni , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Maxime Ripard Subject: [PATCH 06/18] power: reset: Add AT91 reset driver Date: Thu, 3 Jul 2014 16:14:42 +0200 Message-Id: <1404396906-25194-10-git-send-email-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 2.0.1 In-Reply-To: <1404396906-25194-1-git-send-email-maxime.ripard@free-electrons.com> References: <1404396906-25194-1-git-send-email-maxime.ripard@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Implement the reset behaviour of the various AT91 SoCS in drivers/power/reset. It used to be (and still is) located in arch/arm/mach-at91, and in order to preserve bisectability is not removed yet, but every board should be converted to use this driver instead. Signed-off-by: Maxime Ripard --- drivers/power/reset/Kconfig | 7 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/at91-reset.c | 202 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 210 insertions(+) create mode 100644 drivers/power/reset/at91-reset.c diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 19d546c5edfa..b3fef01d7cbb 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -14,6 +14,13 @@ config POWER_RESET_AS3722 help This driver supports turning off board via a ams AS3722 power-off. +config POWER_RESET_AT91_RESET + bool "Atmel AT91 reset driver" + default SOC_AT91SAM9 || SOC_SAMA5 + help + This driver supports restart for Atmel AT91SAM9 and SAMA5 + SoCs + config POWER_RESET_AXXIA bool "LSI Axxia reset driver" depends on ARCH_AXXIA diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index dde2e8bbac53..1599214b91d9 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o +obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c new file mode 100644 index 000000000000..878547410acb --- /dev/null +++ b/drivers/power/reset/at91-reset.c @@ -0,0 +1,202 @@ +/* + * Atmel AT91 SAM9 SoCs reset code + * + * Copyright (C) 2014 Maxime Ripard + * + * Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include + +#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ +#define AT91_RSTC_PROCRST BIT(0) /* Processor Reset */ +#define AT91_RSTC_PERRST BIT(2) /* Peripheral Reset */ +#define AT91_RSTC_EXTRST BIT(3) /* External Reset */ +#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ + +#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ +#define AT91_RSTC_URSTS BIT(0) /* User Reset Status */ +#define AT91_RSTC_RSTTYP GENMASK(10, 8) /* Reset Type */ +#define AT91_RSTC_NRSTL BIT(16) /* NRST Pin Level */ +#define AT91_RSTC_SRCMP BIT(17) /* Software Reset Command in Progress */ + +#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ +#define AT91_RSTC_URSTEN BIT(0) /* User Reset Enable */ +#define AT91_RSTC_URSTIEN BIT(4) /* User Reset Interrupt Enable */ +#define AT91_RSTC_ERSTL GENMASK(11, 8) /* External Reset Length */ + +enum reset_type { + RESET_TYPE_GENERAL = 0, + RESET_TYPE_WAKEUP = 1, + RESET_TYPE_WATCHDOG = 2, + RESET_TYPE_SOFTWARE = 3, + RESET_TYPE_USER = 4, +}; + +static void __iomem *at91_ramc_base[2], *at91_rstc_base; + +static void at91sam9_restart(enum reboot_mode mode, const char *cmd) +{ + asm volatile( + ".balign 32\n\t" + + "str %2, [%0, #" __stringify(AT91_SDRAMC_TR) "]\n\t" + "str %3, [%0, #" __stringify(AT91_SDRAMC_LPR) "]\n\t" + "str %4, [%1, #" __stringify(AT91_RSTC_CR) "]\n\t" + + "b .\n\t" + : + : "r" (at91_ramc_base[0]), + "r" (at91_rstc_base), + "r" (1), + "r" (AT91_SDRAMC_LPCB_POWER_DOWN), + "r" (AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST)); +} + +static void at91sam9g45_restart(enum reboot_mode mode, const char *cmd) +{ + asm volatile( + "cmp %1, #0\n\t" + "beq 1f\n\t" + + "ldr r0, [%1]\n\t" + "cmp r0, #0\n\t" + + ".balign 32\n\t" + + "1: str %3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" + " str %4, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" + " strne %3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" + " strne %4, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" + " str %5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t" + + " b .\n\t" + : + : "r" (at91_ramc_base[0]), + "r" (at91_ramc_base[1]), + "r" (at91_rstc_base), + "r" (1), + "r" (AT91_DDRSDRC_LPCB_POWER_DOWN), + "r" (AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST) + : "r0"); +} + +static void __init at91_reset_status(struct platform_device *pdev) +{ + u32 reg = readl(at91_rstc_base + AT91_RSTC_SR); + char *reason; + + switch ((reg & AT91_RSTC_RSTTYP) >> 8) { + case RESET_TYPE_GENERAL: + reason = "general reset"; + break; + case RESET_TYPE_WAKEUP: + reason = "wakeup"; + break; + case RESET_TYPE_WATCHDOG: + reason = "watchdog reset"; + break; + case RESET_TYPE_SOFTWARE: + reason = "software reset"; + break; + case RESET_TYPE_USER: + reason = "user reset"; + break; + default: + reason = "unknown reset"; + break; + } + + pr_info("AT91: Starting after %s\n", reason); +} + +static struct of_device_id at91_ramc_of_match[] = { + { .compatible = "atmel,at91sam9260-sdramc", }, + { .compatible = "atmel,at91sam9g45-ddramc", }, + { /* sentinel */ } +}; + +static struct of_device_id at91_reset_of_match[] = { + { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_restart }, + { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, + { /* sentinel */ } +}; + +static int at91_reset_probe(struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + at91_rstc_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(at91_rstc_base)) { + dev_err(&pdev->dev, "Could not map reset controller address\n"); + return PTR_ERR(at91_rstc_base); + } + + if (pdev->dev.of_node) { + const struct of_device_id *match; + struct device_node *np; + int idx = 0; + + for_each_matching_node(np, at91_ramc_of_match) { + at91_ramc_base[idx] = of_iomap(np, 0); + if (!at91_ramc_base[idx]) { + dev_err(&pdev->dev, "Could not map ram controller address\n"); + return -ENODEV; + } + idx++; + } + + match = of_match_node(at91_reset_of_match, pdev->dev.of_node); + arm_pm_restart = match->data; + } else { + const struct platform_device_id *match; + int idx = 0; + + for (idx = 0; idx < 2; idx++) { + res = platform_get_resource(pdev, IORESOURCE_MEM, idx + 1 ); + at91_ramc_base[idx] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(at91_ramc_base[idx])) { + dev_err(&pdev->dev, "Could not map ram controller address\n"); + return PTR_ERR(at91_rstc_base); + } + } + + match = platform_get_device_id(pdev); + arm_pm_restart = (void (*)(enum reboot_mode, const char*)) + match->driver_data; + } + + at91_reset_status(pdev); + + return 0; +} + +static struct platform_device_id at91_reset_plat_match[] = { + { "at91-sam9-reset", (unsigned long)at91sam9_restart }, + { "at91-g45-reset", (unsigned long)at91sam9g45_restart }, + { /* sentinel */ } +}; + +static struct platform_driver at91_reset_driver = { + .probe = at91_reset_probe, + .driver = { + .name = "at91-reset", + .of_match_table = at91_reset_of_match, + }, + .id_table = at91_reset_plat_match, +}; +module_platform_driver(at91_reset_driver); -- 2.0.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/