Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030351AbaGDUZz (ORCPT ); Fri, 4 Jul 2014 16:25:55 -0400 Received: from bhuna.collabora.co.uk ([93.93.135.160]:38720 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030309AbaGDUZw (ORCPT ); Fri, 4 Jul 2014 16:25:52 -0400 From: Javier Martinez Canillas To: Lee Jones Cc: Mark Brown , Mike Turquette , Liam Girdwood , Alessandro Zummo , Kukjin Kim , Doug Anderson , Olof Johansson , Tomeu Vizoso , Krzysztof Kozlowski , Yadwinder Singh Brar , Tushar Behera , Andreas Farber , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH v7 14/24] clk: max77686: Improve Maxim 77686 PMIC clocks binding Date: Fri, 4 Jul 2014 22:24:17 +0200 Message-Id: <1404505467-26526-15-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.0.0.rc2 In-Reply-To: <1404505467-26526-1-git-send-email-javier.martinez@collabora.co.uk> References: <1404505467-26526-1-git-send-email-javier.martinez@collabora.co.uk> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Like most clock drivers, the Maxim 77686 PMIC clock binding follows the convention that the "#clock-cells" property is used to specify the number of cells in a clock provider. But the binding document is not clear enough that it shall be set to 1 since the PMIC support multiple clocks outputs. Also, explain that the clocks identifiers are defined in a header file that can be included by Device Tree source with client nodes to avoid using magic numbers. Finally, add "clock-output-names" as an optional property since now is supported by the clock driver. Signed-off-by: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Reviewed-by: Doug Anderson Reviewed-by: Mike Turquette --- Changes since v6: None Changes since v5: - Fix generic driver changes merged into max77802 clock patch by mistake. Suggested by Yadwinder Singh Brar. - Register clock lookups using clk_register_clkdev() instead of doing manually. - Use the managed devm_clk_register() function and remove clk un-registration. - Add "clock-output-names" property support. Suggested by Yadwinder Singh Brar. - Return the rate unconditionally in recalc_rate. Suggested by Mike Turquette. Changes since v4: None Changes since v3: - Don't change clock-names property to make clear that it's the consumer clock name and should not match the producer clock. Suggested by Doug Anderson. --- .../devicetree/bindings/clock/maxim,max77686.txt | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 96ce71b..9c40739 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -9,13 +9,21 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled Following properties should be presend in main device node of the MFD chip. Required properties: -- #clock-cells: simple one-cell clock specifier format is used, where the - only cell is used as an index of the clock inside the provider. Following - indices are allowed: + +- #clock-cells: from common clock binding; shall be set to 1. + +Optional properties: +- clock-output-names: From common clock binding. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: - 0: 32khz_ap clock, - 1: 32khz_cp clock, - 2: 32khz_pmic clock. +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h +header and can be used in device tree sources. + Example: Node of the MFD chip max77686: max77686@09 { @@ -34,5 +42,5 @@ Example: Clock consumer node compatible = "bar,foo"; /* ... */ clock-names = "my-clock"; - clocks = <&max77686 2>; + clocks = <&max77686 MAX77686_CLK_PMIC>; }; -- 2.0.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/